I am trying to configure the Report Manager Virtual Directory but cannot do it. In the Configure Report Server screen, the option is greyed out (there is a tick next to it to say that it has been configured, but this is greyed out too)!
Any ideas??
Thanks
Tom
Hi,
I have a problem with SQL Server 2005 Reporting Service. I installed Reporting Service in my machine.
When I was trying to configure the Reporting Service, Report Manager Virtual Directory got disabled.
I need to enable this Report Manager Virtual directory. I can see the disabled link for
Report Manager Virtual Directory and it shows the error: Report Manager Virtual Directory is not
configurable for the current mode. Kindly help me out of this problem.
Thanks
Subhendu
Hi, I have a problem with SQL Server 2005 Reporting Service. I installed Reporting Service in my machine. When I was trying to configure the Reporting Service, Report Manager Virtual Directory got disabled. I need to enable this Report Manager Virtual directory. I can see the disabled link for Report Manager Virtual Directory and it shows the error: Report Manager Virtual Directory is not configurable for the current mode. Kindly help me out of this problem. Thanks Subhendu
View 3 Replies View RelatedHi Guys,
Windows XP, IIS 5.1
I have written an installer that creates an MS SQL Database, creates the
necessary data tables and then imports the data into the data tables. All
this works fine.
I now need to copy the web pages to a directory on the users machine and
then make the chosen directory a virtual directory so the user can call the
pages in the usual way (http://localhost/mytestsite/index.html)
Would anyone know how to create a virtual directory using dos command line parameters. I have seen something using "IIsVdir.vbs" but I do not have this script file.
Any help would be really appreciated.
Best Regards,
Steve.
Steve
hi all,
I Installed SQL server 2005, installation completed with out any warnings.
but when trying to configure reporting services it is not configured and throwing error msg as create virtual directory.
and the error msg looks like
"
ReportServicesConfigUI.WMIProvider.WMIProviderException: The virtual directory specified is not valid. Make sure the specified name is not too long and doesn't contain illegal characters. (example: ;)
at ReportServicesConfigUI.WMIProvider.RSReportServerAdmin.CreateVirtualDirectory(String virtualDirectory, String path)
"
pls give me any suggestions, Thanks for any help
sql9
Hello, everybody.
Im getting the message error "The page cannot be found", while trying to access the Report Manager throught its virtual directory. Otherwise the Report Server url access works fine and both virtual directories have the same configuration
Any suggestion ?!?!
Reporting Services is running on Windows Server 2003
We regularly deploy our product to client's sites and install a named instance of SQL Server 2005 and Reporting Services on their Windows Server. We use the instance name "lgs" during SQL setup and it automatically ensures we have a http://server/Reports$lgs and http://server/ReportServer$lgs to work with.
A recent deployment had some trouble with their OS and we have needed to reinstall the Reporting Services component of SQL. After reinstalling, the virtual directories for Reports$lgs and ReportServer$lgs are gone. I have used the Reporting Services Configuration tool to create new virtual directories but when I enter Reports$lgs or ReportServer$lgs as the names I get an error. The error says that the virtual directories cannot
be created due to illegal characters in the names.
How can I create the same virtual dirs that would have normally been created during initial installation?
Thanks,
- Jason
In SQL2K you could implement web virtual directory (using IIS) that allowed you to query a stored procedure from any HTTP browser (e.g. IE, Netscape, Opera, ...) from anywhere in the world.
For example:
http://www.mywebsvr.com/WEB_VDN?sql=exec%20Display_Info%20&contenttype=text/html
would return a HTML page of information as defined in Display_Info stored procedure. This was very useful but a little slow due to IIS overhead!
ENDPOINT & http.sys allow access SQL2005 without IIS which should be faster (?). Hence I have been trying to configure ENDPOINT to do something similar without success. Furthermore there is little information on what you can do with the "FOR TSQL" option and how to use it.
PS I don't want to use SOAP as the client will be a web browser not an apps.
Hi all,
I have some problem about Reporting Service integrated for SharePoint 2007.
At first, I created 1 user named "User1" under "Domain1". User1 has role "SharePointAdmin" Group and Local Admin Group.
Then I created application pool named "RSAppPool". Its identy was "Domain1User1".
After that, I install Reporting Service and SP2.
Then I config Reporting Service to Integrated Sharepoint Mode below.
Report Server Directory Setting: "ReportServer" in "Default Web Site".
Window Service Identity:
Service Account : "Domain1User1" (Windows Accout)
Web Service Identity:
Report Server: "RSAppPool" (that created above)
Report Manager: Empty
Database Setup:
Database name: Database1 (Server Mode: SharePoint Integrated)
Credential Type : Windows Credentials
Account Name: Domain1User1
After configuration, I reset IIS and test browse to http://servername/ReportServer/ , then there is a Windows Login dialog.
I enter "Domain1User1" and User1's password. But User1 cannot right to access to "ReportServer" virtual directory.
This is error message
You are not authorized to view this page
You do not have permission to view this directory or page using the credentials that you supplied.
HTTP Error 401.1 - Unauthorized: Access is denied due to invalid credentials.
Internet Information Services (IIS)
I'm not sure. Where is I config wrong? ....
Please help me.
Thank you very much.
if you R Right Person Help Me Please.....
There was a 2008 SSRS service running on server "abc".
I have a .Net UI that uses the wsdl at [URL] ....
They deployed SSRS 2012 service on a new server "xyz".
DNS points abc to xyz. Nslookup looks right shows both xyz and abc alias to the same IP.
when I try to go to [URL] .... it redirects to xyz as expected for the host name but the HTTP GET /ReportServer is appended with GET /Reports/ReportServer which doesn't exist and I get an 404 error.
I have no admin rights to see anything and I have no idea if it was an inplace upgrade or a new server. I assume it's new since the actual server name changed in nslookup. Why would it append the default virtual directory when it makes the hop to server "xyz"?
Hi,I've just installed SQL server and then IIS and SQLCE tools.I created a virtual directory and was trying to update the NTFSpermissions from SQLServer Connectivity management when i got thefollowing error - Access Control List (structure) invalid.Has anyone come across this and if so, what did u do to fix it.ThanksLyn
View 2 Replies View RelatedI have a an asp.net application running under IIS. this application is using two folders, the virtual directory under C:Inetpubwwwroot and the application phisical folder at C:.
I want to manage this applications .mdf database using microsoft sql server management studio express(iam running sql express with advanced services) which means i have to attach the database to Ms sql server managemet studio express tool.
What i dont know is if i should attach the .mdf file in the physical folder's App_Data folder at C:myapplicationFolderApp_data or the .mdf file in the virtual directory under C:InetpubwwwrootMyapplicationFolderApp_Data
I dont know which of the two i should attach. Where exactly is the running database, the .mdf file in the physical folder or the .mdf file in the virtual directory under wwwroot.
We have an application that requires write settings to reportserver virtual directory for the IUSR account when anonymous is turned on during the install. Once the install is complete, we lock down the IUSR account so that it only has browse access to the virtual directory when enabling anonymous access.
We automate the uninstall and install of our daily builds and I'm trying to figure out if I can automated this process somehow either through command line utility or in vbs.
Your help is greatly appreciated...
Eric
Hi, I hope someone can help me! I changed the TCP port that the default instance of SQL 2005 x64 SP1 is listening on and now SQL server won't start as the port is being used - no problem I say to myself, I'll just change it again, however I can't!
My problem is that I can not change the TCP Port back again using Configuration Manager - no matter what values I put in, after a restart of the instance it comes up with this in the IP Addresses tab for TCP/IP Properties and SQL Server won't start:
IP1
Active Yes
Enabled No
IP Address aaa.bbb.ccc.111
TCP Dynamic Ports
TCP Port 0
IP2
Active Yes
Enabled No
IP Address aaa.bbb.ccc.222
TCP Dynamic Ports
TCP Port 0
IP3
Active Yes
Enabled No
IP Address aaa.bbb.ccc.333
TCP Dynamic Ports
TCP Port 0
IP4
Active Yes
Enabled No
IP Address 10.1.1.1
TCP Dynamic Ports
TCP Port 0
IP5
Active Yes
Enabled No
IP Address 127.0.0.1
TCP Dynamic Ports
TCP Port 0
IPALL
TCP Dynamic Ports 2020
TCP Port 2020
Interestingly, the ip address that the server is listening on aaa.bbb.ccc.444 is not reported in the list of IP addresses in the configuration manager for this instance, yet it is when I view the available IP addresses for the other two instances - is this significant?
I have tried failing to the other node, changing it there, changing it at the console and also while logged onto the the virtual machine remote desktop, rebooting both nodes, etc, etc. There are two other instances on this cluster that are still working fine but I hvae not attempted to change the TCP ports they listen on.
I used the same method to change this default instance as I did for a named instance on a similarly configured cluster and it worked fine. How to fix this?
Regards, Mike
2007-02-27 12:03:17.69 Server Server is listening on [ aaa.bbb.ccc.444<ipv4> 2020].
2007-02-27 12:03:17.71 spid9s Starting up database 'tempdb'.
2007-02-27 12:03:17.72 Server Error: 26023, Severity: 16, State: 1.
2007-02-27 12:03:17.72 Server Server TCP provider failed to listen on [ aaa.bbb.ccc.444<ipv4> 2020]. Tcp port is already in use.
2007-02-27 12:03:17.75 Server Error: 17182, Severity: 16, State: 1.
2007-02-27 12:03:17.75 Server TDSSNIClient initialization failed with error 0x2740, status code 0xa.
2007-02-27 12:03:17.75 Server Error: 17182, Severity: 16, State: 1.
2007-02-27 12:03:17.75 Server TDSSNIClient initialization failed with error 0x2740, status code 0x1.
2007-02-27 12:03:17.75 Server Error: 17826, Severity: 18, State: 3.
2007-02-27 12:03:17.75 Server Could not start the network library because of an internal error in the network library. To determine the cause, review the errors immediately preceding this one in the error log.
2007-02-27 12:03:17.77 Server Error: 17120, Severity: 16, State: 1.
2007-02-27 12:03:17.77 Server SQL Server could not spawn FRunCM thread. Check the SQL Server error log and the Windows event logs for information about possible related problems.
[DTS.Pipeline] Information: The buffer manager detected that the system was low on virtual memory, but was unable to swap out any buffers. 12 buffers were considered and 12 were locked. Either not enough memory is available to the pipeline because not enough is installed, other processes are using it, or too many buffers are locked.
View 12 Replies View RelatedI have one SSIS package that has FTP task which takes files from FTP and save on my local drive but i'm getting above error.
[FTP Task] Error: Directory is not specified in the file connection manager "User::ProcessingFileLocation".
In FTP Editor setting :
User::ProcessingFileLocation used SSIS variable and values sets to this is MYSERVERRaw Data
why getting this error?
when i mention direct path it is working fine BUT why not for variable.I'm using same path for other packages too they all are working fine.
Hi All,
We use Cisco Call Manager 4.1(3), We use RTMT Tool to monitor our devices & now Daily once i get a error message as Directory connection failed . Monitored precanned object has value of 0., can anyone tell me what could be the excat cause or how can we troubleshoot this issue or what services should we check on our call manager to overcome this error.
Thanks & Regards
Sameer P Khakhar
A user was created with a limited privilege under the USERS group. Once this user loged in the Report Manager he is acting like an Admin and Content Manager, though he is not given even a browser role.
What do u think that this guy is acting like a Super User evenif he is restricted to a browser role on the Report Manager ????????????
I did all my best, but no luck so far
I have done the following and a domain user would not access report created a login to the SQL server to the user (this SQL Server is where data source DB is)went to site setting in Report Manager and made this use a system userright clicked on report folder and made this user in the browser roleeven checked that in the report in question, the user is already in the browser role Still the user would not access the report! "User .......... does not have required permission" is the error message I am getting.
View 6 Replies View RelatedI have written a report visual studio. The report has 10 multi-value parameters that pull data from their individual data sets within the reports. When running the report from within Visual Studio it renders fine. There are no errors reported, only a warning related to a pathname I have use to retrieve image data and display on the report.Deployment of the report is error free.When I view the report I briefly get the "Loading" splash window, but then nothing. None of the headers or static text is displayed. The results window is blank.
The report defaults all the parameter values. In trying to debug the issue I have found by reducing the number of parameter values the report will render. Once I have all the values added, the report does nothing.Below is the query being used for the report. The where clause in the query shows the parameters being used and the syntax.We are running on Windows Server 2008 R2 and SQL Server 2008 R2.
Ralph
SELECT RTRIM(a.ITEMNMBR) AS Style, RTRIM(a.ITEMDESC) AS Description, a.ITMSHNAM AS UPC, c.LOCNCODE AS Store, d.LISTPRCE AS ListPrice, a.CURRCOST AS Cost,
a.USCATVLS_1 AS [Main Category], a.USCATVLS_2 AS Market, a.USCATVLS_3 AS [Alternate Retail], a.USCATVLS_4 AS Country, b.ITEMXTRAS_1_Type AS Type,
b.ITEMXTRAS_2_Finish AS Finish, b.ITEMXTRAS_3_SubCategory AS SubCategory, b.ITEMXTRAS_4_Department AS Department,
[code]...
I am working on reports in SSRS 2008 (not R2)... There are some reports with parameters that are hidden when the report is accessed through normal URL using ReportViewer.asx..The thing is that these hidden parameters need to be visible when the report is accessed using SSRS Report Manager.
View 3 Replies View RelatedHi,
I'm trying to deploy Reporting Services on an Internet-facing web server using a custom security extension (forms authentication). We will be putting Report Manager on the Web Server outside of the firewall, and Report Server on another machine inside the firewall. When testing the solution in a development environment with Report Manager and Report Server on the same box, the solution works fine.
When testing it using the Internet-facing environment described above, it almost works but there seems to be an issue with the authentication cookie that is generated. Here's what happens:
1. User enters credentials on UILogon.aspx and submits form.
2. In the code-behind, LogonUser() is called through a web service proxy and the authentication cookie is returned successfully. The code used here to set the cookie is the same code used in the Forms Authentication sample that ships with RS2005.
3. The user is redirected to Folder.aspx, and the request hangs for a while, and eventually kicks you back out to UILogon.aspx, as if it lost the authentication cookie. When doing a trace on the HTTP header, the cookie is still there.
Is there anything special I need to do to make the Report Server "see" the cookie when I have Report Manager and Report Server on different machines?
Any help would be much appreciated!
Mike
Hi,
I am unable to launch report builder from the report manager from a client machine. But I am able to launch from the localhost.
Even I am able to launch report builder by clicking reportbuilder.exe on the local machine.
Please help !!
OS - Windows XP professional
SQL Reporting Services 2005.
Hello everyone,
I created a custom assembly using C# to transform some binary data into text, and in this assembly I used one win32 dll developed by our customer to help me to do the tranformation.
The code I used to call the win32 dll is like below:
[DllImport("tdasuie.dll", EntryPoint = "AlrtLogConditionToText",
ExactSpelling = false, CharSet = CharSet.Auto, SetLastError = true)]
private static extern UInt32 AlrtLogConditionToText(Byte[] pbCondition, StringBuilder pszText, UInt32 dwSize);
I defined a C# method to call the above win32 method and return a string. Then in the report, I called this C# method to get the correct string.
In the report designer, the C# method in the custom assembly can return the correct string in the preview window. But after I deployed the report into the report server, the textbox will only display "#error" in the report manager web page.
Can anybody help me on it? Thanks a lot.
Danny
I am getting the following error when I attempt to deploy my test report.
"Failed to Deploy Report, The user 'XXX/IUSR_XXX' has insufficient rights to perform this action."
Has anyone gotten this error before, I have tried every permission option I could with the IUSR account by adding it to each folder etc ...and still get no resolve. Anyone have a fix for this bug ?
Responses are much appreciated!!
I have few reports under different folders in Report Manager. Is there a way to set the data source for the whole folder rather than each report individually? There is also a folder where reports generate dynamically. Since the report project doesn't exist anymore, I can't set the data source through code. How can I set the data source for the whole folder?
View 7 Replies View RelatedCan a person change the page title from "Report Viewer/Manager" to the actual report name?
View 3 Replies View RelatedHI, there,
I added a new windows user "ReportUser" which is a local user (not in administrator group). When I connect to the report manage's web page, I use reportuser to log in (when the anonymous access is disabled it will ask a log in). Report builder icon is not showing up on the report manager home page.
If I log in as a user in administrator group, the reportr builder icon shows up so I can download it and build report.
I have assigned reportuser "Content manager" and "repoter builder" access to the home folder. Is there anything else I have to do to make the report build icon show up on the home page?
Thanks
Jack
I was able to log in to SSRS report manager. But i was unable to run a report i designed on report builder.
It prompts for login when i wanted to run the report and i used the same windows authentication to sign in
It will show me the parameters but when i click on view report it gives this error
"Data source 'DataSource1': An error has occurred.
Details: Microsoft.ReportingServices.ReportProcessing.ReportProcessingException: Cannot create a connection to data source 'DataSource1'. ---> System.Data.SqlClient.SqlException: Login failed for user 'Acc-11Admin'."
Hi,
I'm encounter lately some weird behaviour of SSRS in BIDS as well as after deploying on Reporting Server.
I'm running basic classical SQL SSRS Reports with Oracle DB connection. My reports have header and footer pagination and well defined report layer configuration. All the reports are simple based on one table and some basic parameters passed to query.
In query builder from BIDS from data tab, the query is running fine without any other execution delays. Also the query is runnign fine in PL/Dev environment.
When I switch in "Preview" mode the report hangs in execution and just showing "Report is being generated" without any resuts. After a while is generating an execution error (after 20 min).
The behaviour is the same after deployment on Report Server .
I now...here it comes...the problem is intermitent...some times the report is working...but most of the times it hangs on execution.
I checked the report from top to bottom and nothing's wrong from design perspective.
On other reports I don't have this problem and I don't understand where to start to investigate.
Any suggestions...I'm stuck here.
Thanks
Is there a way that we can tell what active directory group the person belongs to that is running the report? I know that you can detect a user id, but I need to access the Active Directory Group that they belong to.
View 1 Replies View Related
I need to prevent domain and local administrators from having full control over our report manager. (I want them to be assigned permissions just like everyone else, some reports they can see other reports they can not.)
How can I accomplish this? I tried going into Report Manager -> Site Settings -> Configure Site Wide Security and re-assigning BUILTINAdministrators to the System User role instead of the System Administrator role. (A different set of report manager admins was given the system administrator role).
However, it appears that members of the BUILTINAdministrators group still have full control in Report Manager.