Report Model/Datasource View, Primary Data Source Problem

May 23, 2007

I have a datasource view DSV1. It points to a datasource DS1 that is considered the "primary".



I have created a Report Model that uses DSV1 (and thus uses DS1)



I created a new datasource, DS2 that I would like to use instead of DS1. (I can't just modify DS1 because if I modify it, it will overwrite it when we go to our Production environment and break that datasource)



So, I can go into DSV1 and change all the references from DS1 to DS2.



But that's where the problem lies.



When I try to build, I get the following error:



"The Table property of the Entity "E1" refers to the Table "dbo_View", which is not in the primary data source."



Somehow, the entity is tied to the "primary" datasource. When I change it back to DS1, everything works fine. Any thoughts? What can I do?

View 1 Replies


ADVERTISEMENT

Report Model (Data Source View) Issue

Jul 6, 2007

We've built an oltp that uses nothing but synonyms that reach out to various DB's in the organization thru linked servers.



The issue that we are having is Data Source Views can only see tables and views. Is it possible to use synonyms? If not what would be a work around.



Please advise. Thanks



Steve

View 1 Replies View Related

How Do I Add A Data Source View And Report Model To An Existing Project

Feb 22, 2007

I have an existing project with the data source and report folder with working reports. I need to create a model for other department members to use Report Builder, not Business Intelligence Developer Studio, to develop their reports from. How do I add a data source view and report model folder to the project so I can then create a view and model?

View 1 Replies View Related

How To Refresh A Data Source View And Autogenerate/Re-Deploy The Corresponding Report Model

Jan 9, 2007

Hi everyone!,

Our team is new to SSRS and we are trying to figure out how to refresh the data source view, autogenerate the corressponding report model and Re-Deploy the Report Model (rewrite existing Report Model) on the server on a periodoc basis or trigger the whole action whenever there is a change in the database on some specific tables.

We prefer to do this action through a Agent job ( a diff approach is also welcome).

Are there any stored procs out there?

Appreciate your time.

-PN



View 6 Replies View Related

Use Report Server Project To Connect To Report Model Project Data Source View?

Jan 17, 2008

Hello,
I've created a Report Model Project that can be used by Report Builder to generate ad-hoc reports. I'm trying to create a connection string in my Report Server Project that points to the Report Model Project data source view.

All I can do is create a regular datasource, which bypasses the metadata contained in the Data Source View.

Basically I want my Report Server Project and my Report Builder reports to leverage the same metadata. Is this possible? If so how do I get the connection string?

Thanks!!
-Matt

View 1 Replies View Related

How To Use A Stored Procedure With Parameters To Create The Datasource View For Report Model Builder

Mar 12, 2007

I have a stored procedure that takes a date range and returns all the sales in that date range. I'm trying to create the report model for ad-hoc reporting. When I go to create the dataset view, it only lets me select tables or views.... how do I get around this?

View 2 Replies View Related

Analysis :: Possible To Create Multiple Data Source View Having Same Datasource?

Jul 27, 2015

1. As per my current development SQL Sever Analysis Database consists of two Cube (Cube A and Cube B).  Cube A and Cube B share the same data source view (DSV1). The source for both these cubes has the same data source (DS1).

2. As per the requirement I need to create third Cube i.e. Cube C. Is it possible to create a second Data Source View (DSV2). The Source of second Data Source View (DSV2) will be the same data source(DS1).

I am thinking to create second Data Source View (DSV2) for Cube C because existing layout of the DSV1 has become complex. I wanted to know the pros and cons of creating a multiple data source view with same data source

View 3 Replies View Related

Create Date Source View And Data Model That Works Right

Jan 22, 2008

I created a data model for report builder. And since it wont let me use views, i tried to put all the tables im using in one of my already made views, to create a data source view like my sql view. But when i connect everything the same, my report model still doesnt narrow my search. I only want to see Breed information, but since i have a Breeder table,and Customer table, its showing me all customers, and not limiting it to the ones that are breeder customers.

heres the tables:




Code Snippet

FROM dbo.Tbl_Customer INNER JOIN
dbo.Tbl_Customer_Breeder ON dbo.Tbl_Customer.Customer_Code = dbo.Tbl_Customer_Breeder.Customer_Code INNER JOIN
dbo.Tbl_Customer_Detail ON dbo.Tbl_Customer.Customer_Code = dbo.Tbl_Customer_Detail.Customer_Code INNER JOIN
dbo.Tbl_Customer_Category ON dbo.Tbl_Customer.Customer_Category_Id = dbo.Tbl_Customer_Category.Customer_Category_Id INNER JOIN
dbo.Tbl_Customer_Classification ON
dbo.Tbl_Customer.Customer_Classification_Id = dbo.Tbl_Customer_Classification.Customer_Classification_Id INNER JOIN
dbo.Tbl_Customer_In_Breed ON dbo.Tbl_Customer.Customer_Code = dbo.Tbl_Customer_In_Breed.Customer_Code INNER JOIN
dbo.Tbl_Breed ON dbo.Tbl_Customer_In_Breed.Breed_Id = dbo.Tbl_Breed.Breed_Id




What am i doing wrong, and are there any suggestions.

View 6 Replies View Related

XML Data Source To Report Model (Dec CTP SQL 2005 SP2)

Jan 29, 2007

Hi,

I've used the Dec CTP of SQL 2005 SP2 to create a Report Server Project.

In this project, I can create an XML datasource and successfully use that datasource in a report published on Sharepoint using the new Sharepoint AddIn.

I've also used Dec CTP of SQL 2005 SP2 to create a Report Model Project.

In this project I can create SQL Data Sources, DataSource Views andReport Models which I deploy to sharepoint and create a report builder based report from.

What I can't do is create an XML based datasource in a Report Model Project. Also, if I create one solution containing both types of project, the Report Model Project Data Source Wizard suggests I can create a data source based on an existing data source in my solution. What I find is that my XML data source from the Report Server Project is not listed. In fact even if I create a SQL data source in the Report Server Project that isn't available either.

Please let me know what should work now/RTM.

Thanks

Martin

View 2 Replies View Related

How To Change The Datasource View Of A Mining Model.

Feb 9, 2007

Hi,

I created on model in Business Intelligence Development studio.I wants to change the datasourceview(dsv) assigned for that view.for e.g

My mining Model is StudModel.dmm.

The dsv for that model is StudDSV.dsv.

I wants to change the dsv for that model to marksDSV.dsv.

How to do that in Business Intelligence Development studio.

Thanks,

Karthik.

View 4 Replies View Related

Report Model Using A Non-SQL Server, Non-SSAS Data Source

Dec 20, 2006

I've been doing research on the web trying to find if it's possible to create a Report Model that is based on a Data Source that is NOT SQL Server and NOT SSAS.

Specifically I'd like to be able to build a Report Model on a Web Server (or multiple web services).

Does anyone have any information relating to this? Based on my research it looks like there's a few interfaces that need to be implemented (such as ISemanticModelGenerator, etc.).

I did find a post relating to using ODBC data sources for a Report Model and the recommended solution was Linked Tables in SQL Server or UDM in SSAS. Both cases don't look feasible for a Web Service-based Data Source.

Thanks,

Jeremy Wiebe

View 5 Replies View Related

Report Model And It's Datasource

Aug 4, 2006

hi everyone,

I created a report model and deployed it. When I open the rpt builder on web I get the following error.

'The selected data source does not have and content available'

Seemed like it would be a easy issue, but I cannot retrieve any data in the rpt model. The datasource I'm using does work for rpts not associated with the rpt model. Any suggestions? It seems like I've missed a step. Thanks, Lisa



View 4 Replies View Related

Report Model With XML Datasource

Jan 5, 2007


Is there a way to create a Report Model with XML / WebService as datasource?

I am able to generate reports that connect to a WebService through Report Designer, but unable to find similar functionality in Model Designer.

View 4 Replies View Related

Creating A Report Model On A UDB Datasource

Aug 30, 2006

Hi all,



I'm just getting started with Reporting Services and have a question.

I'm trying to set up a report model based on a UDB data source. However when I use the report model wizard, I get presented with:

[DB2/SUN] SQL0104N An unexpected token "SET TRANSACTION" was found following "BEGIN-OF-STATEMENT" ... SQLSTATE 42601.

I think that this is trying to set transaction isolation levels however this is not valid SQL for a UDB database.

Is there something that I'm missing with my configuration to make RS know that this is a non-SQLServer database?



Many thanks,

JK

View 1 Replies View Related

Error Creating Report Model Using A DB2 Datasource

Jun 12, 2007

I'm receiving the following message after I've created a datasource and datasource view:



[DB2/SUN] SQL0104N An unexpected token "SET TRANSACTION" was found following "BEGIN-OF-STATEMENT" ... SQLSTATE 42601.

View 1 Replies View Related

Report Models Data Source View

Apr 30, 2007

How does the report model know what data source view to use? I could not find it defined anywhere in the .smdl file.



My problem is this. I have a Report Model project with two data sources, two data source views and multiple report models. When I try and bind a data source to an entity in the report model I do not get to choose which data source view to use to choose what table/view I want to bind the entity too and only the tables in one of my DSV's shows up. When I first created it, it worked fine. It automatically selected the correct view and table and was successfully created but now when I open the project, that correlation is lost.



Any suggestions or help is appreciated, thanks.

View 1 Replies View Related

Report Builder Using Report Model Based On Linked Server (Excel) - Primary Key?

Sep 6, 2007

I've created a linked server with a pretty basic Excel spreadsheet, and used this command to create a linked server to it:


sp_addlinkedserver ''XL_SPS_1', 'Excel', 'Microsoft.Jet.OLEDB.4.0', 'c:MyExcel.xls', null, 'Excel 8.0'



I want to use this as the data from which to build a report model. As linked servers don't show up in the Data Source View wizard, I created a view in SQL Server:


create view MyExcel
as
select * from XL_SPS_1...Sheet1$


Okay, great, now the view shows up in the DSV wizard and I can create the data source view. However, when I create a new report model based on this data source view, the Report Model Wizard tells me at "Create entities for all tables" that I've got an error when it processes dbo_MyExcel that "Table does not have a primary key."

I assume this is where the identifying attributes for the entities in the report model are taken from, so I really can't go further. Does anyone have an idea as to how to add a primary key to a linked server (Excel) in SQL 2005? Can this be done? Other than importing spreadsheet data to a SQL table, how can I get around this?

Thanks,
--Stan

View 3 Replies View Related

Report Model - How To Create A Unique Logical Primary Key In A Named Query

Apr 7, 2008



Hi,
Te following situtation is :

ReportModel is created ,there is only a named query in DSV ,it has a few tables in it(The relationship are inner joins and outer joins).

The question is how could I create a unique logical primary key to identify each unique row in the named query dataset, and also you cannt generate a model unless the named query has a logical primary key . how can I solve this problem,any help?


View 2 Replies View Related

Creating A Report Model Based On A View

Aug 1, 2007

in my report model project, i'm able to successfully create and deploy a report model based on a data source view that is in turn based on a table object in my data store.

but if i try to create a report model that's based on a a data source view that is in turn based on a view in my data store, well then, the report model that gets created comes up blank - i.e. shows no objects.

What gives? Is it not possible to create a report based on a view? that can't be right!

View 6 Replies View Related

Loading Data Using Ole Db Source With Input Source Being A View

Dec 13, 2007

I was trying to load data using SSIS, Data Flow Task, OLE DB Source, source was a view to a OLE DB Destination (SQL Server). This view returns 420,591 rows from Query Analyzer in 21 seconds. Row length is 925. When I try to executed the Data Flow Task from SSIS, I had to stop the process after 30 minutes, because only 2,000 rows had been retrieved. I modified the view to retun top 440, 000 and reran. This time all 420, 591 rows were retrieved and written in 22 seconds. Next, I tried to use a TOP 100 Percent. Again, only 2,000 rows were return after 30 minutes. TempDB is on a separate SAN Raid group with 200 gig free, Databases on a separate drive with 200 gig free. Server has 13 gig of memory and no other processes were executing.

The only way I could populate the table was by using an Execute SQL Task and hard code an Insert into table selecting data from the view (35 seconds) from SSIS.

Have anyone else experience this or a similar issue? Anyone have a solutionexplanation?

View 13 Replies View Related

Amo And Creating Data Source And Data Source View Code

Feb 2, 2008

,
Hi
In this code how can I create a new data source and new data source view and model and structure that it run dynamic.
In this code I have a lot of errors, that they are about server and database don€™t have in current code,
In this code, first I should definition server or no?

Database dbNew = new Database (databaseName,
Utils.GetSyntacticallyValidID(databaseName, typeof(Database)));
srv.Databases.Add(dbNew);
dbNew.Update(true);
***********************************************************

How can I create data source and data source view and model and structure?
Please say code of that, and guide me.
databasename and srv is unknown.
Do I add other reference with analysis services?
Please explain about these codes:
************************************************************************
1)
RelationalDataSource dsNew = new RelationalDataSource(
datasourceName,
Utils.GetSyntacticallyValidID(
datasourceName,
typeof(RelationalDataSource)));

db.DataSources.Add(dsNew);
dsNew.ConnectionString = connectionString;

dsNew.Update();
2)

RelationalDataSourceView rdsv;

rdsv = db.DataSourceViews.Add(
datasourceviewName,
Utils.GetSyntacticallyValidID(
datasourceviewName,
typeof(RelationalDataSourceView)));

rdsv.DataSourceID = ds.ID
***************************************************************
3)
OleDbConnection cn = new OleDbConnection(ds.ConnectionString);
OleDbCommand cmd = new OleDbCommand(
"SELECT * FROM [" + tableName + "] WHERE 0=1", cn);
OleDbDataAdapter ad = new OleDbDataAdapter(cmd);

DataSet dss = new DataSet();
ad.FillSchema(dss, SchemaType.Source);

*************************************************************
4)

// Make sure we have the name we thought

dss.Tables[0].TableName = tableName;

// Clone here - the original DataTable already belongs to a DataSet
rdsv.Schema.Tables.Add(dss.Tables[tableName].Clone());
rdsv.Update();


5)

MiningStructure ms = db.MiningStructures.Add(miningstructureName, Utils.GetSyntacticallyValidID(miningstructureName,
typeof(MiningStructure)));
ms.Source = new DataSourceViewBinding(dsv.ID);
ms.CaseTableName = "Customer";

Add columns:
ScalarMiningStructureColumn smsc;

// From table "Customer" we will add a couple of columns
// CustomerID - key
smsc = new ScalarMiningStructureColumn("Customer ID",
Utils.GetSyntacticallyValidID("Customer ID", typeof(ScalarMiningStructureColumn)));
smsc.IsKey = true;
smsc.Content = "Key";
smsc.KeyColumns.Add("Customer", "customer_id", OleDbType.Integer);
ms.Columns.Add(smsc);

*******************************************
6)

MiningModel mm = ms.MiningModels.Add(miningmodelName,
Utils.GetSyntacticallyValidID(miningmodelName,
typeof(MiningModel)));


mm.Algorithm = "Microsoft_Decision_Trees";
mm.Parameters.Add("COMPLEXITY_PENALTY", 0.3);


MiningModelColumn mc = new MiningModelColumn("Customer ID",
Utils.GetSyntacticallyValidID("CustomerID",
typeof(MiningModelColumn)));
mc.SourceColumnID = ms.Columns["Customer ID"].ID;
mc.Usage = "Key";
mm.Columns.Add(mc);


mm.Update();

Please exactly say, whatever I want
Thanks a lot for your answer
Please don€™t move this question because I don€™t know where I should write this.

View 1 Replies View Related

An Error Has Occurred During Report Processing. A Data Source Instance Has Not Been Supplied For The Data Source DetailDS_get_o

Mar 13, 2008

hi ,

i am trying for a drill through report (rdlc)

ihave written the following code in drill through event of reportviewer, whenever i click on the first report iam getting the error like

An error has occurred during report processing.


A data source instance has no
t been supplied for the data source "DetailDS_get_orderdetail".







the code is



using System;

using System.Data;

using System.Data.SqlClient;

using System.Configuration;

using System.Collections;

using System.Web;

using System.Web.Security;

using System.Web.UI;

using System.Web.UI.WebControls;

using System.Web.UI.WebControls.WebParts;

using System.Web.UI.HtmlControls;

//using Microsoft.ApplicationBlocks.Data;

using Microsoft.Reporting.WebForms;

using DAC;

public partial class _Default : System.Web.UI.Page

{

protected void Page_Load(object sender, EventArgs e)

{

ReportViewer1.Visible = false;

}

protected void Button1_Click(object sender, EventArgs e)

{

DAC.clsReportsWoman obj = new clsReportsWoman();

DataSet ds = new DataSet();

ds = obj.get_order();

ReportViewer1.LocalReport.DataSources.Clear();

ReportDataSource reds = new ReportDataSource("DataSet1_get_order", ds.Tables[0]);



ReportViewer1.LocalReport.DataSources.Add(reds);

ReportViewer1.LocalReport.ReportPath = "C:/Documents and Settings/km63096/My Documents/Visual Studio 2005/WebSites/drillthrurep/Report.rdlc";

ReportViewer1.LocalReport.Refresh();

ReportViewer1.Visible = true;

}

protected void ReportViewer1_Drillthrough(object sender, DrillthroughEventArgs e)

{

DAC.clsReportsWoman obj = new clsReportsWoman();

ReportParameterInfoCollection DrillThroughValues =

e.Report.GetParameters();



foreach (ReportParameterInfo d in DrillThroughValues)

{

Label1.Text = d.Values[0].ToString().Trim();

}

LocalReport localreport = (LocalReport)e.Report;

string order_id = Label1.Text;

DataSet ds = new DataSet();

ds = obj.get_orderdetail(order_id);



ReportViewer1.LocalReport.DataSources.Clear();

ReportDataSource reds = new ReportDataSource("DetailDS_get_orderdetail", ds.Tables[0]);

ReportViewer1.LocalReport.DataSources.Add(reds);

ReportViewer1.LocalReport.ReportPath = Server.MapPath(@"Reportlevel1.rdlc");

ReportViewer1.LocalReport.Refresh();





}



}

the code in method get_orderdetail(order_id) is

public DataSet get_orderdetail(string order_id)
{
SqlCommand cmd = new SqlCommand();
DataSet ds = new DataSet();
cmd.Parameters.Add("@order_id", SqlDbType.VarChar, 50);
cmd.Parameters["@order_id"].Value = order_id;
ds = SQLHelper.ExecuteAdapter(cmd, CommandType.StoredProcedure, "dbo.get_orderdetail");
return (ds);
}pls help me.

View 1 Replies View Related

Power Pivot :: Structural Data Model Changes In Data Source Leads To Errors

Oct 12, 2015

I've question about how to handle structural datamodel changes in a datasource of PowerPivot. Suppose I'm developing a starmodel in SQL Server and sometimes a datatype changes or a name of a field changes in a table. It seems to me that PowerPivot handle this not gracefully as Analysis MD does (mostly). I received an error because of a wrong fieldname or even no error when a dattype changes in PowerPivot. Is this common or do I something wrong here. Does this mean that every time the datamodel changes the PowerPivot should be recreated? Or am I missing the clue here?

View 6 Replies View Related

Can We Pause Log Shipping, Bring Primary Db To Simple Recovery Model And Then Back To Full R Model?

Apr 25, 2008



We have the following scenario,

We have our Production server having database on which Few DTS packages execute every night. Most of them have Bulk Insert stored procedures running.

SO we have to set Recovery Model of the database to simple for that period of time, otherwise it will blow up our logs.

Is there any way we can set up log shipping between our production and standby server, but pause it for some time, set recovery model of primary db to simple, execute DTS Bulk Insert Jobs, Bring it Back to Full recovery Model AND finally bring back Log SHipping.

It it possible, if yes how can we achieve this.

If not what could be another DR solution in this scenario.

Thanks Much
Tejinder

View 6 Replies View Related

Error When Generating Data Source Model

Mar 20, 2008

When I attempt to generate a datasource model I get the following error messages:
------------------------------------------------
More than one item in the Entity 'Customer' has the
name 'Customer Merge Custs'. Item names must be unique
among immediate siblings. (DuplicateItemName)

More than one Field in the Entity 'Customer' has the
name 'Customer Merge Custs'. Field names must be
unique within an Entity. (DuplicateFieldName)

More than one item in the Entity 'Pricing Service Layout
Detail' has the name 'Pricing Service
Extensions'. Item names must be unique among immediate
siblings. (DuplicateItemName)

More than one Field in the Entity 'Pricing Service Layout
Detail' has the name 'Pricing Service
Extensions'. Field names must be unique within an Entity.
(DuplicateFieldName)
---------------------------------------------------

Examining any of the above tables in SQL Server Management Studio does not reveal any duplicate column names. In fact, 'Customer_Merge_Custs' does not appear to be a column in 'Customer' nor does 'Pricing_Service_Extensions' appear in 'Pricing_Service_Layout_Detail'.

As an experiment, deleting the table 'Pricing_Service_Extensions' and regenerating did make the two associated messages go away.

Steve P.

View 3 Replies View Related

Power Pivot :: How To Change Data Source For Model

Feb 25, 2014

I have an Excel 2013 file with lots of DAX connected to an Azure database. I'd like to reuse all that work by changing the data source for the PowerPivot model to a different database which is an exact copy (just empty) on the same server, but Excel won't let me. In PowerPivot I can change the database connection, the user ID and password as well as the connections name. When opening each table properties (inside PowerPivot model) the new connection is used and all old data is removed, but as soon as I refresh using Existing connections, both from PowerPivot or from the Excel Data tab, the old connection is used and old data is reloaded.

If I use Existing connections from inside PowerPivot, I can se that the new connection is highlighted and has the correct variable, but I think maybe that one is run first, then the old one is run afterwards (or something like that).

On the Excel Data tab, I can see that the old connection is the only one Excel itself seems to know about, but I cannot change anything there as it's read-only.

There must be a way to change this. Even with copy and paste it would take me days to recreate this Excel file from scratch and it would be a serious flaw and reduction of usability for PowerPivot.

View 10 Replies View Related

Create Data Source, Data Source View From XML?

May 8, 2007

hi everybody,
i want to create data source and data source view for data mining, with using C Sharp.
i have create data source and data source view and export to XML file, but when i change to another computer, run those XML file, it return error, when i run statement to create and biuld mining model, what can i change on xml or how to run XML on another computer sucessfully,
and have i build data source and data source view, how to do it.?

thanks for you helps

View 1 Replies View Related

Unable To Generate Model Off Of An Analysis Services Data Source

Feb 21, 2007

Hello,

Our company is doing some basic research into using analysis services as a solution for our customers. I've taken our database and built an analysis services project in BI Studio and deployed it to Analysis Services on my local machine I connect to Reporting Services in Management Studio, create a folder for the cube, give my Windows user acct. Content Manager permission, create the Data Source (conn string = "Provider=SQLNCLI.1;Data Source=(local)SQLServer2k5;Integrated Security=SSPI;Initial Catalog=STI-PDB" -- copied from the Analysis Services project in BI Studio), and go to "Generate Model". What I get is an rsModelGenerationError, sub [Create Perspective From Cubes] with a connection issue at the base:

Either the user, <computername>Thomas, does not have access to the STI-PDB Database, or the database does not exist. () (Microsoft SQL Server 2005 Analysis Services)

Now, in the Database Engine, my Windows account has the db_owner database role for STI-PDB and it's default schema is dbo, which all the objects are created under. What am I missing here?

View 4 Replies View Related

Using Cube Views As A Data Source To Build Mining Model

Nov 16, 2006

Hi all,

I am new to SQL Server 2005 Analysis Services and would like to use the OLAP Cubes as a datasource to build Mining Model . However i would like to use a particular view of the OLAP cube that i have generated to be used as the datasource for the mining model . I find that i am not able to save the Cube View while browsing the OLAP cube in Business Intelligence Studio. Is there a way i can acheive this requirement.

Any ideas regarding this will be really appreciated.

Thanks & Regards,

Satya

View 6 Replies View Related

Report Model Deployment : The Model ID Of The Submitted Model Must Match That Of The

Dec 5, 2005

Running 2005 Beta 3 Refresh.  When I first deploy, it works fine. Subsequent deployments yield the following error:

View 9 Replies View Related

Report Model Is Generating Without Data

Feb 22, 2007

I have been generating report models for users to use with Report Builder and there is no data when they select the model. I noticed that the tables I chose did not have a primary key and when I chose a different table, with a primary key, and generated a model from it, then there was data for the user to use in Report Builder.

Is there a documented work around or will I need to set a primary key on each table?

View 3 Replies View Related

Data Filter With Report Model

Sep 24, 2007



I am trying to applying an data filter that will filter out user based on userid

Three tables:

tblPerson (fact table): contains over 1 million records with about 20 fields. One of the fields is called BureauID (int). BureauID indicates what Bureau the person works in for an given record.

tblBureau (attribute table) which has a FK relationship to tblPerson) contains the following fields:

BureauID int - this is the linked field to tbl person
Bureau Code varchar
Bureau ShortName varchar

The reason we use tblBureau as in attribute table instead of place the bureau code and short name directly into table Person is so that we index tbl person quickly with "ints".

tblDataAccess, which has two fields loginID with bureau Code. The bureau code in this table tells me what bureau that userid has access to.

How do i get the report model to filter based on this userid????. I know i have to add some data filters but i am not sure where.

I put an filter on DataAccess so that login = getuserid().

But what do i do to table person or table bureau, so that a person can only see the people in there bureau.

Thanks for you help

Ryan Swann

View 5 Replies View Related

Report Model Data Cache

Feb 1, 2008

Hi,

I created a report model using reporting services, deployed the model locally and then built a report based on that model. The report works fine, but any data updates don't show up, seems like data is cached. I bounced reporting services, cleared cached tables in ReportServerTempDB but of no use. Has anybody faced this problem? How can I get updated data for reports built through a report model. Any help is appreciated.

Thanks,
Sri

View 4 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved