I have created a report with a stored proc which takes a parameter whose default value is null. Now when I run my stored proc in Enterprise Manager without any params I get 4 rows otherwise with proper parameter I get 2 rows.
Now I set the params value to allow for Null and blank values. When I run the report if I provide parameter value it works fine but if i try to run it without any param it shows an empty report while the stored proc running without params shows 4 rows.
I have earlier sucessfully created reports where stored procs had 4 params out of which 3 where defaulted to null. And so I set the allow nulls, Allow Blanks values to be true for those params in Rep services. So when I selected value for 1st param and ran the report I got the desired report. But this time I have only one param which can be null. But its not working.
I have installed SQL Server Reporting Service on window xp. everything working fine except one thing.
I have installed sql server with my a/c. my a/c have admin rights. when i giving http://dineshpatel/reports it is displaying page but Report Builder and other option are not displaying. I hope i don't have admin rights.
I have checked with local administrator login also but same problem.
what additional setting are require for admin rights?
Hi,I am using SQL Server 2005 32 bit version. Could any one clarify methe caption database option with some examples? I am quite confusedwith the explanation given in MSDN. Kindly help me.Thanks in Advance.Om Prakash
In my report i have CNAME parameter , which allows null value. I checked Allow null value check box in report parameter properties.
when i preview the report , it displays checked NULL check box beside CNAME parameter . I want to give some meaningful name(i.e.ALLCustomers) to this checkbox instead of NULL.
I have a SSRS report with four parameters,and I want to be able to enter information for two of the parameters and run the report opposed to all four of them. However, when I select allow blanks and only select the parameters that I want to run the report by, the report come back blank..Essentially, I want to be able to the run report by different parameters without having to enter information for all parameters at the same time.
I select the option execution from a report (it's in properties option) and then raise an error which says An internal error occurred on the report server. See the error log for more details. (rsInternalError) Get Online Help EXECUTE permission denied on object 'xp_sqlagent_notify', database 'mssqlsystemresource', schema 'sys'.
How do you configure a multi-value parameter so it will allow the user to not enter the parameter?
I'm using integer multi-value parameters. I can't set the parameter to allow null, and when I preview the report and leave the parameter blank, it tells me to enter at least one value. I tried it with string parameters, and the report just doesn't run in preview if you don't enter any values, even if you choose "allow blank".
How do you specify a multi-value parameter to allow "empty" or "null"?
I have created a report with the report server project template.
the report is created from stoked procedure having defaut input parameters.
With visual studio, i publish my report on reportserver. whenever i access to my report on this url :
http://localhost/ReportServer/Pages/ReportViewer.aspx?%2fReport+Project4%2fReport4&rs:Command=Render. the created report is with the default parameters.
I would like to know if i can transmet parameters for the stocked procedure to build the report with the request i want.
I tried to put parameter directly in the url in this way
We have an Office SharePoint 2007 site, we developed a couple of web parts and added them to our site. We used SQL Server Reporting services 2005 as our reporting solution. The reports are hosted on the report center and when we need a report, we open it by sending a URL requesting the report, passing the report parameters in the URL query string. So the report is filtered based on the parameters passed from the web parts.
But since best practices say that you should host reports directly under SharePoint, by configuring the reporting services to run in the SharePoint integrated mode. We followed the steps and installed SharePointRS and we finally succeeded to publish the reports to a SharePoint folder, but we had a limitation: we are unable to pass the report parameters internally to the report hosted in SharePoint. If we passed them in the query string as the report center case, SharePoint neglects them totally. So the question is: how can I pass parameters internally between a SharePoint web part and a SQL server 2005 reporting services report hosted in SharePoint?
I have several reports that use parameters that I have defined as multi-value. When I am designing the reports I see the "(Select All)" option listed first in each parm control that has the multi-value property set true. However, when the same reports are deployed to our server and viewed through Report Manager, the "(Select All)" option is missing. I need the "(Select All)" to be present.
I've seen some discussion of a service pack. Could this be the problem? What do we need to do to get our "(Select All)" back?
Hi all, Hope someone can help me on this. I have a dataset from a stored Procedure which I am displaying on a table, I am using the option from the navigation tab "jump to report" from one of the Textboxes in the table. But I want to use the same set of data but filtered with the selected option on the table. I already have parameters for the Stored Procedure passing them to the "jump to report". But I just cannot figure out how to pass the set data set but filtered for my next report. Is there a way to do this.Or do I have to create another version filtered of the stored procedure used for the original. Ideally, it would be great to use the same dataset but filtered. Hope my question make sense. Thanks in advance jard
Hi, When i try to deploy a Datasource which is using a report server model, i dont see the Deploy Option Enabled. It is disabled for Report Server Model.
My connection string is server=http://localhost/reportserver;datasource=/i2i Report Model/SCM Data Warehouse Model
I am trying to develop a report from cube,and it has one drill through report.when i click on sales amount field on main report,then it open the drill through report with details.Here i passed the **(category,subcat,product)parameters(Cascaded)** to drill through report in action part of main report.In my main report i have two columns .
when i click on 100, parameters are passed & it open the detail report correctly, but when i click on 50,the values for subcat parameter is not getting values in detail report and same as the product also.
Is there a way to subscribe SSRS report using dynamic parameters for email and trigger the report from autosys job so that report should generate the exact time the job is triggered.Let me describe, my SSRS report should be triggered on success of one autosys job. i need to send email parameter and time of report schedule from this autosys job.
I am using a SQLDataSource with Stored Procedures. The Select, Insert and Update all work well. However I cannot get the delete to work. My stored procedures are tested and verified and the parameter names are the same as the source columns. When I try to run the delete an error that the stored procedure expects the parameter @locationStationId, however this value passes properly for the Update command?!? I tried to change the parameter to original_locationStationID to pass the original value, however this result in Null being passed for the parameter. I cannot understand why this works for Update and passes the location ID, but will not work for DELETE. Can anyone shed any light onto the matter? Thanks.OldValuesParameterFormatString="original_{0}" UpdateCommand="spUpdateLocation" UpdateCommandType="StoredProcedure" DeleteCommand="spDeleteLocation" DeleteCommandType="StoredProcedure"> <DeleteParameters> <asp:Parameter Name="locationStationId" Type="String" /> </DeleteParameters> <InsertParameters> <asp:Parameter Name="locationStationId" Type="String" /> <asp:Parameter Name="locationType" Type="String" /> <asp:Parameter Name="locationName" /> <asp:Parameter Name="division" Type="String" /> </InsertParameters>
I know it's unbelievable, but i didn't ever use SP before. Sorry for this noobish question, don't beat me for this - please ;-)
In my SELECT Query i like to have some (WHERE) paramteters le's say: ID, NAME and AGE. I allways programmicali generate a WHERE statement in relation to which parameters I really get, because not allwasy i get all the parameters together. This is fine for "normal" Tables.
How does this work with SP? If I don't get NAME, do I set the SP-Parameter NAME to null to unconsider it? Or do I have to make some IF statements in the SP to check, if NAME has some value?
Hi, I do have a stored procedure with parameters inside. I just want to ignore those parameters that are NULL so that my WHERE clause will not execute them anymore. Here's my code:
CREATE PROCEDURE SEARCHPATIENT @patnCode varchar(10) = NULL, @patnSurname varchar(20) = NULL, @patnGivenName1 varchar(20) = NULL AS SELECT.... FROM ... WHERE patnCode=@patncode AND patnSurname =@patnSurname AND patnGivenName1 =@patnGivenName1
BUT... If the user passes @patnSurname as NULL, I got an SQL error message: "There was an error executing the query.. Timeout expired... ". I was hoping I could write an WHERE clause where IT WILL ONLY EXECUTE those parameters WITH VALUE and IGNORE those NULLs.
Can someone help me on this? Can I use IF THEN ELSE statement inside the WHERE clause? Can I use CASE STATEMENT inside the WHERE clause?
I'm new to SQL Server, so if I'm doing anything stupid don't bemean :)I have a procedure that I use to return data based on optionalparameters. It works fine, except when the underlying data contains anull on one if the fields being searched.My system uses a default wildcard for all parameters, so this excludessuch records. I need a way to add in " OR fldName IS NULL " where theparameter is empty or '%'. I've looked at using CASE WHEN, but itdoesnt seem to like SQL Keywords being part of the WHEN clause.I'd hate to have to resort to executing concatonated strings made fromIF and ELSE statements. Just too messy and not at all pretty!Any Ideas? Here's what I've got:ALTER PROCEDURE [dbo].[procFindUnits]@strUnitIDnvarchar = '%',@strProjectNamenvarchar = '%',@strAddressnvarchar = '%',@strTenancynvarchar = '%',@strTenurenvarchar = '%'ASBEGINSET NOCOUNT ON;SELECTtblUnits.strUnitID,tblProjects.strProjectName,qryAddresses.Address_OneLine,lkpTenancyTypes.strTenancyType,lkpTenureTypes.strTenureTypeFROM tblUnits INNER JOINtblProjects ON tblUnits.intProjectID = tblProjects.intProjectIDLEFT OUTER JOINlkpTenancyTypes ON tblUnits.intTenancyType =lkpTenancyTypes.intTenancyType LEFT OUTER JOINlkpTenureTypes ON tblUnits.intTenureType =lkpTenureTypes.intTenureTypeID LEFT OUTER JOINqryAddresses ON tblUnits.strUnitID = qryAddresses.strUnitIDWHERE(tblUnits.strUnitID LIKE @strUnitID)AND (tblProjects.strProjectName LIKE @strProjectName)AND (qryAddresses.Address_OneLine LIKE @strAddress)AND (lkpTenancyTypes.strTenancyType LIKE @strTenancy)AND (lkpTenureTypes.strTenureType LIKE @strTenure)END
i have a form where filter information is going to be keyed/selected. the data from that form is copied into a struct regardless of whether each field has data in it or not (eg firstname may have been entered but not lastname, so the struct would contain firstname = 'john' and lastname = null) i then want to build an sql statement (not using stored procedures but just direct sql) from this struct data but obvioulsy can't just have a statement that says 'select ID from theTable where firstname='john' AND lastname=''" as this won't bring back the right info, if anything at all.
i normally build the statements like this
Code Block string sql = "select ID from MembersTemp where FirstName = '{0}'"; SqlCommand cmd = new SqlCommand(string.Format(sql, FirstName), _con); _con.Open(); SqlDataReader rdr = cmd.ExecuteReader(); List<int> result = new List<int>(); while (rdr.Read()) { etc....
so really, what's the best way of building an sql statement where some search parameters won't hold a value and therefore need ignoring.
also, whilst i'm here, i use viz studio 2005 and sql server 2005 (express??), so that does mean i'm using TSQL as well??
I am having hard time in sending parameters to the report server through reportviewer control from my application. Could anybody help me on this issue?. Is there any way to send the parameters and also what kind of configuration do i need on my report project so that it can accept parameters from my application.
I have a really cool Budget report which has two matrices on it. One is used/visible if the user selects four levels of grouping, and one is used if the user selects only three levels of grouping. The four choices for grouping are four fields, Par, FERC, Point, and Resource.
Since grouping is optional, I need a way to pass the parameter for a field that is not grouped on from the main report to the drillthrough report. For example if the user chooses to group on all fields but Point, I need to pass the report parameter that was used by the main report for Point to the drillthrough report as a report parameter.
So, I tried testing the three grouping levels values and if none were equal to "Point" then pass in the parameter by putting the following expression in the Parameter Value box for the Point parameter on the Navigation tab of the datacell of the main report that is the drillthrough link:
=iif( Parameters!GroupLevel1.Value <> "Point" and Parameters!GroupLevel2.Value<>"Point" and Parameters!GroupLevel3.Value<>"Point" , Join(Parameters!PNTPoint.Value,",") , Fields!Point.UniqueName )
But this is not working; the drillthrough report shows a blank dropdown for the Point parameter and I have to manually set it. Does anyone see an error in the syntax of the iif statement?
Any references, links, resources or good clean jokes would be greatly appreciated.
Is it possible to poplulate some control like Dropdownlist (for example, with Product names Or Product Ids) from database table in SSRS project type and then filter report by choosing various choice pre-populated in dropdownlist control.
Project Type is : SQL Server Reportings 2005.
Desired Action: Report will run in browser, User will choose specific product and Run the report(filter) to show that product relate results.
I tried to pass parameter from one report to another report. I can send the parameter using following option: I used jump to url option and write the following expression:
I am using version 9.00.2047.00 SP1 of Visual Studio 2005.
Using ADO.NET, I have been unable to get the Execute SQL task to successfully return the value of an output parameter defined as varchar or nvarchar when the value is null. No other data types seem to have this problem, including the sql_variant data type.
The variables to which the three output parameters return their values have a data type of Object. The task runs fine when the integer or datetime parameters are used, and the variables can be identified as null using IsDBNull. But as soon as the nvarchar (or varchar) parameter is included, the task fails with this message:
"The incoming tabular data stream (TDS) remote procedure call (RPC) protocol stream is incorrect. Parameter 1 ("@vc"): Data type 0xE7 has an invalid data length or metadata length."
I have seen a couple of postings that sound similar to this problem, but so far I have found no resolution. Any advice would be much appreciated.
I have a CLR function that throws an error if one of the parameters is NULL. Am I using the IsNullable tag correctly or am I supposed to do this another way? The function simply formats decimal values using .NET culture information and returns a string. Thanks very much for any help. -- Erik
I am trying to view my reporting service web site for the first time, but I've got this Error message "StringStartsWith can't accept null parameters" I am using Widows Vista and Report Manager and Report Server Web site has been set to Default web Site and Windows Server Identity.BuiltIn Account has been set to Local System and Web Service Identity.ReportServer and Report Manager has been set to Classic .Net App Pool.
I have an event: Private Sub SqlDataSourceIncome_Deleted(ByVal sender As Object, ByVal e As System.Web.UI.WebControls.SqlDataSourceStatusEventArgs) Handles SqlDataSourceIncome.Deleted Dim command As SqlClient.SqlCommand command = e.Command If command.Parameters("@nReturnCode").Value <> 0 Then DROPDEAD() End If That fires from: <DeleteParameters> <asp:Parameter Name="nDeletebyId" Type="Int64" /> <asp:Parameter Name="nOtherId" Type="Int64" /> <asp:Parameter Direction="Output" Name="nReturnCode" Type="Int64" /> <asp:Parameter Direction="Output" Name="nReturnId" Type="Int64" /> </DeleteParameters> End Sub
When I: GridViewIncome.DeleteRow(GridViewIncome.SelectedRow.RowIndex) But nReturnCode is ALWAYS NULL... I even did a stored procedure that just: ALTER PROCEDURE [dbo].[sp_nDeletebyId] @nReturnCode bigint output, @nReturnId bigint output AS SET @nReturnCode = 0 SET @nReturnId = 0 And STILL got nothing but the NULLS... the insert & update stuff works fine, with identical code... it's just the DELETED event that I can't seem to knock. Has anyone seen this before? The above sample stored proc did return 0 when executed one the server... and, BTW, the row is deleted!