Report Server (MSSQLSERVER) Cannot Connect To The Report Server Database
Feb 15, 2007
I am running SQL Reporting Services and SQL Server 2005 on a Windows 2003 server. The configuration has been unchanged for approx. 3 weeks. Suddenly today, reports being accessed via an ASP.NET 2.0 application (on Windows 2003 Server with IIS 6) using a SOAP call to the reportserver became inaccessable. End users received the following error:
Message: An error occurred during rendering of the report. --->
An error occurred during rendering of the report. --->
An error occurred during rendering of the report. --->
An error occurred during rendering of the report. --->
Attempted to read or write protected memory. This is often an indication that other memory is corrupt.
Stack Trace: at System.Web.Services.Protocols.SoapHttpClientProtocol.ReadResponse(SoapClientMessage message, WebResponse response, Stream responseStream, Boolean asyncCall)
at System.Web.Services.Protocols.SoapHttpClientProtocol.Invoke(String methodName, Object[] parameters)
at IFA.CAP.SQLReportingService.ReportingService.Render(String Report, String Format, String HistoryID, String DeviceInfo, ParameterValue[] Parameters, DataSourceCredentials[] Credentials, String ShowHideToggle, String& Encoding, String& MimeType, ParameterValue[]& ParametersUsed, Warning[]& Warnings, String[]& StreamIds) in C:ApplicationsIFACAPWeb ReferencesSQLReportingServiceReference.vb:line 1319
at IFA.CAP.BusinessObjects.Reports.Certificate(Int32 certificateID, Boolean isDraft, Boolean isCertified) in C:ApplicationsIFACAPBusinessObjectsIFA.CAP.BusinessObjects.Report.vb:line 551
at IFA.CAP.CertificateDetail.PrintCertificate(Object sender, EventArgs e) in C:ApplicationsIFACAPMainCertificateDetail.aspx.vb:line 2287
Subsequently, the following error is logged on the Report Server/Database server:
Report Server (MSSQLSERVER) cannot connect to the report server database.
I was able to temporarily correct the problem by performing as iisrest on the Report Server/Database server. However, the same problem occured again a couple hours later. I am relatively new to SQL Reporting Services so any help would be appreciated.
MDJ
View 1 Replies
ADVERTISEMENT
Dec 5, 2007
every 1 hour my server's computer is restarting !
when the windows finish restarting i open the Event viewer and see that what coused it is the error :
"Report Server Windows Service (MSSQLSERVER) cannot connect to the report server database."
Event 107
source : "Report Server Windows Service (MSSQLSERVER)"
How can i solve it ?
View 4 Replies
View Related
Oct 26, 2007
Hi
I am in weired move kindly help me out..I created report using sql server 2005 Reporting services..At one stage it is working fine with proper parameter but due to bad input parameter my report goes in hang mode..so i went to my DB server and restart my reporting service and then MSSQLSERVER I dont remember sequence (may be vice versa) now I am not able to get report when i am passing right parameter..I went to google and only I came to know that due to sequence of restart of services will cause this error..
error like..Application error:
Report Server Windows Service (MSSQLSERVER) cannot connect to the report server database.
For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp.
Syste error:
The SQL Server Integration Services service failed to start due to the following error:
The service did not respond to the start or control request in a timely fashion.
For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp.
Kindly help me out.
T.I.A
View 5 Replies
View Related
Mar 23, 2007
This error is being displayed in the eventlog every minute. Any ideas on what it is referring too? I reviewed some posts but most point to specific problems of report server not running, or receiving this error during a run. We are receiving no errors at all. However this is jamming up the event viewer to make troubleshooting other issues very diffucult.
Event Type: Error
Event Source: Report Server Windows Service (MSSQLSERVER)
Event Category: Management
Event ID: 107
Date: 3/23/2007
Time: 8:20:16 AM
User: N/A
Computer: SPECTRUM_DB2B
Description:
Report Server Windows Service (MSSQLSERVER) cannot connect to the report server database.
For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp.
View 3 Replies
View Related
Jun 16, 2006
SQL server 2005 express reporting problem.
error message:
This feature "remote access to report data sources and/or the report server database" is not supported in this edition of reporting service
I got this error message when I try to connect to database hosted in another PC running SQL server 2000.
Is it true that SQlL server Express can only use Local Database Engine to host the database?
View 5 Replies
View Related
Mar 6, 2008
Hi,
I have created and deployed a data source (which uses "Credentials supplied by the user running the report") and a model which uses this data source.
Also I have built a report using Report Builder and all works well.
Now I wish to use Visual Studio to build a report, so I'm trying to create a data source from my computer which the report should use and I want it to use the model on the remote server. In the Report Wizard I am using "Report Server Model" and the following connection string:
Server="http://<remoteserver>/reportserver";datasource="/Models/MyModel"
IHowever I can't make the credentials to work. I've tried them all with no luck. What username/password must I use? Because so far nothing of what I have tried works.
Any help is highly appretiated.
Kind Regards,
Robert
View 3 Replies
View Related
Sep 9, 2006
Hi My project is in .NET 2003 i.e. framework 1.1 and database in SQLServer 2000. But the reports have been developed using SQLServer 2005 Reporting Services. Now when I am trying to deploy them through deployment project of .NET its giving me following error:"Using other editions of SQL Server for report data sources and/or the report server database" is not supported in this edition of Reporting Services. Now I am really confused with this. Can any one please guide me regarding this ASAP. Thanks, Falguni
View 4 Replies
View Related
May 25, 2007
Hi every one,
I'm very new new at this. I'm try to deploy a report model and got this message. I have no idea what its going on about.
Can anyone help me?
Aku
------------------------------
System.Web.Services.Protocols.SoapException: The report server cannot decrypt the symmetric key used to access sensitive or encrypted data in a report server database. You must either restore a backup key or delete all encrypted content. Check the documentation for more information. (rsReportServerDisabled) ---> Microsoft.ReportingServices.Diagnostics.Utilities.RPCException: The report server cannot decrypt the symmetric key used to access sensitive or encrypted data in a report server database. You must either restore a backup key or delete all encrypted content. Check the documentation for more information. (rsReportServerDisabled) ---> System.Exception: The report server cannot decrypt the symmetric key used to access sensitive or encrypted data in a report server database. You must either restore a backup key or delete all encrypted content. Check the documentation for more information. (rsReportServerDisabled) ---> System.Exception: The report server cannot decrypt the symmetric key used to access sensitive or encrypted data in a report server database. You must either restore a backup key or delete all encrypted content. Check the documentation for more information. (rsReportServerDisabled) ---> System.Exception: The report server cannot decrypt the symmetric key used to access sensitive or encrypted data in a report server database. You must either restore a backup key or delete all encrypted content. Check the documentation for more information. (rsReportServerDisabled) ---> System.Exception: The report server cannot decrypt the symmetric key used to access sensitive or encrypted data in a report server database. You must either restore a backup key or delete all encrypted content. Check the documentation for more information. (rsReportServerDisabled) ---> System.Exception: Bad Data. (Exception from HRESULT: 0x80090005)
--- End of inner exception stack trace ---
--- End of inner exception stack trace ---
--- End of inner exception stack trace ---
--- End of inner exception stack trace ---
--- End of inner exception stack trace ---
at Microsoft.ReportingServices.Diagnostics.DataProtection.ProtectData(Byte[] unprotectedData, String tag)
at Microsoft.ReportingServices.Library.ConnectionManager.ConnectStorage()
at Microsoft.ReportingServices.Library.Storage.NewStandardSqlCommand(String storedProcedureName)
at Microsoft.ReportingServices.Library.DBInterface.GetAllConfigurationInfo()
at Microsoft.ReportingServices.Library.RSService.GetSystemProperties(Property[] requestedProperties)
at Microsoft.ReportingServices.WebServer.ReportingService.GetSystemProperties(Property[] Properties, Property[]& Values)
--- End of inner exception stack trace ---
at Microsoft.ReportingServices.WebServer.ReportingService.GetSystemProperties(Property[] Properties, Property[]& Values) (System.Web.Services)
------------------------------
BUTTONS:
OK
------------------------------
View 38 Replies
View Related
Mar 30, 2007
I would like to know if it is possible to have different applications on separate report servers sharing one report server database. If so are there possible issues or ptfalls to this type of architecture?
Thanks,
thecoleman
View 3 Replies
View Related
Jan 17, 2008
Hello,
I've created a Report Model Project that can be used by Report Builder to generate ad-hoc reports. I'm trying to create a connection string in my Report Server Project that points to the Report Model Project data source view.
All I can do is create a regular datasource, which bypasses the metadata contained in the Data Source View.
Basically I want my Report Server Project and my Report Builder reports to leverage the same metadata. Is this possible? If so how do I get the connection string?
Thanks!!
-Matt
View 1 Replies
View Related
Jul 5, 2007
Hi
I went to my comp ->rt cick->manage-IIS->default website->rt click->properties->directory security->annoymouse access€¦EDIT->under Default domain it was blank, and i added a domain there.
And i was getting error opening up the reports from localhost.
I changed everything to same as it was previosly, and I am getting the error:
The report server cannot open a connection to the report server database. A connection to the database is required for all requests and processing. (rsReportServerDatabaseUnavailable) (rsRPCError) Get Online Help
Cannot open database "ReportServer$SQLExpress" requested by the login. The login failed. Login failed for user 'NGESComputer name$'.
View 1 Replies
View Related
Mar 29, 2007
Hi,
I am newbie and working with an application that ueses report server 2000 to make reports.
The problem is somebody has moved the database and changed some acounts and now I can not either get any report from the server or install my changes for reports. I used to run this commando to install changes for reports:
rs -i PublishGeckoReports.rss -s http://IpAddress:32808/reportserver -v definitionPath="C:TempDeploymentReportsRDL" -v targetFolder="/MyReports"
here is the error message i get when i try to install:
System.Web.Services.Protocols.SoapException: The report server cannot open a connection to the report server database. The logon failed
when I browse to http://IpAddress:32808/reportserver I get following:
The report server cannot open a connection to the report server database. The logon failed. (rsReportServerDatabaseLogonFailed) Get Online Help
Logon failure: unknown user name or bad password.
at IIS Manager for default web site Enable Anonymous Access is checked and on the database server and the web.config file use same account and password.
but I heard that somewhere there is encrypted password that i have to change it too.
I need your help
Thanks
View 2 Replies
View Related
Jan 5, 2007
Hi,
I got consistent error of the following:
ReportingServicesService!runningjobs!13!1/3/2007-10:45:21:: e ERROR: Error in timer Database Cleanup (NT Service) : Microsoft.ReportingServices.Diagnostics.Utilities.ReportServerDatabaseUnavailableException: The report server cannot open a connection to the report server database. A connection to the database is required for all requests and processing. ---> System.Data.SqlClient.SqlException: An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: Named Pipes Provider, error: 40 - Could not open a connection to SQL Server)
at System.Data.ProviderBase.DbConnectionPool.GetConnection(DbConnection owningObject)
at System.Data.ProviderBase.DbConnectionFactory.GetConnection(DbConnection owningConnection)
at System.Data.ProviderBase.DbConnectionClosed.OpenConnection(DbConnection outerConnection, DbConnectionFactory connectionFactory)
at System.Data.SqlClient.SqlConnection.Open()
at Microsoft.ReportingServices.Library.ConnectionManager.OpenConnection()
--- End of inner exception stack trace ---
The error happens on Reporting Service version 9.00.3017.00 (the version we are running in Production). The Reporting Service and its database are actually resided in the same physical server. And the strange thing is that it does not prevent any functionalities or features working except when I launch the Management Studio on that server, it usually takes 2 minutes to load up. (any other server would just take 5 -10 seconds).
Can any one help?
Thanks!
William.
View 1 Replies
View Related
Jan 9, 2007
I am getting the following error, when trying to deploy. the report should point to a server which is in my network, but the report is on my machine. where i am trying to deploy locally but point to a different machine.
******************************************************
The report server cannot open a connection to the report server database. A connection to the database is required for all requests and processing.
***********************************
Thank you very much for the information.
View 3 Replies
View Related
Apr 24, 2006
I'm using SQL Express with Advance Services & I get this error when I try to deploy my reports. Why do I get this error
An error has occurred during report processing. (rsProcessingAborted)
Cannot create a connection to data source 'EDPSYS'. (rsErrorOpeningConnection)
The feature: "Remote access to report data sources and/or the report server database" is not supported in this edition of Reporting Services. (rsOperationNotSupported)
Justin Song
View 4 Replies
View Related
Apr 7, 2007
Can't connect to local server instance MSSQLSERVER in SQL Server Management Studio (SQL2005 sp2/Vista).
SQL Server Configuration Manager reports SQL Server2005 services: SQL Server (MSSQLSERVER) Running. This would indicate the name of the SQL server is "MSSQLSERVER" correct? I chose "default" instance during the install and that is the name it gave itself.
I tried connecting to the server using the following for the Server Name: MSSQLSERVER and .MSSQLSERVER neither works.
The only thing that works for my installation is just plain "." (no quotes) and nothing else. Can this be correct because I can't find any reference to this. Thanks.
View 1 Replies
View Related
Mar 24, 2008
Hello,
I moved the web app. I'm working on to another machine. Everything seemed to go well. Installed Reporting Services and configuration worked well with green ticks everywhere and I'm running reports in Report manager and in Visual Studio. However running off the web app. gives the message:
"The attempt to connect to Report Server failed" - there's also a ref. to an HTTP 404 error.
In RSWebApplication.config I have :
<ReportServerUrl></ReportServerUrl>
<ReportServerVirtualDirectory>ReportServer</ReportServerVirtualDirectory>
and in RSreportserver.config I have:
<UrlRoot><server IP>/Reportserver</UrlRoot>
The install might not have gone as well as I thought because there was a "ReportServer" website created in IIS at same level as default. (Also Reports and ReportServer as virtual directories under Default website). The rogue website is 'stopped' at present. Would be grateful for any help with this. One thing is that I'm now behind a proxy so I'm using localhost:8080
View 6 Replies
View Related
Feb 18, 2006
Hi All,
I have a brand new install of sql server 2005 on brand new WINDOWS SERVER2003 with latest versions. Every thing works fine excepting I get a 404 when I connect to report server from management studio..
I am even able to publish reports and all the
url://localhost/reportserver
url://localhost/reports
url://localhost/reportserver/reportbuilder/reportbuilder.application
all work fine on local machine and with in the network behind the fire wall.
But when I try to connect to report server using management studio on the local server or remote server, I get the following error.
"
TITLE: Microsoft SQL Server Management Studio
------------------------------
The attempt to connect to the report server failed. Check your connection information and that the report server is a compatible version. (Microsoft.SqlServer.Management.UI.RSClient)
------------------------------
ADDITIONAL INFORMATION:
The request failed with HTTP status 404: Not Found. (Microsoft.SqlServer.Management.UI.RSClient)
"
More techinal details
"===================================
Cannot connect to xxxxxxxxxxxx.
===================================
The attempt to connect to the report server failed. Check your connection information and that the report server is a compatible version. (Microsoft.SqlServer.Management.UI.RSClient)
------------------------------
Program Location:
at Microsoft.SqlServer.ReportingServices2005.RSConnection.MissingEndpointException.ThrowIfEndpointMissing(WebException e)
at Microsoft.SqlServer.ReportingServices2005.RSConnection.ValidateConnection()
at Microsoft.SqlServer.Management.UI.RSClient.RSClientConnection.CreateConnection(String connectionString)
at Microsoft.SqlServer.Management.UI.RSClient.RSConnectionInfo.CreateConnectionObject()
at Microsoft.SqlServer.Management.UI.RSClient.RSConnectionInfo.RSTypeImpl.GetConnectionObject(UIConnectionInfo ci)
at Microsoft.SqlServer.Management.UI.ConnectionDlg.RSType.GetConnectionObject(UIConnectionInfo ci)
at Microsoft.SqlServer.Management.UI.VSIntegration.ObjectExplorer.ObjectExplorer.ValidateConnection(UIConnectionInfo ci, IServerType server)
at Microsoft.SqlServer.Management.UI.ConnectionDlg.Connector.ConnectionThreadUser()
===================================
The request failed with HTTP status 404: Not Found. (Microsoft.SqlServer.Management.UI.RSClient)
------------------------------
Program Location:
at Microsoft.SqlServer.ReportingServices2005.RSConnection.GetSecureMethods()
at Microsoft.SqlServer.ReportingServices2005.RSConnection.IsSecureMethod(String methodname)
at Microsoft.SqlServer.ReportingServices2005.RSConnection.ValidateConnection()
"
Any help would be greatly appreciated.
Bob
View 27 Replies
View Related
Apr 18, 2008
Hello Room,
· I configured sql 2005 reporting on stand alone window server 2003 box.
· The IIS 6.0 is running and I assigned ip address (20.x.x.x) on the €śReporting€? site.
· I validated and tested the reporting site on local box and it works.
· Open the IE and Entered the http://20.x.x.x. it worked.
· Then, I went to SQL 2005 Configure Report Server, it connected and worked.
· Bring IE and pointed http://20.x.x.x/ReportServers. It works.
· I started create a demo report and published. It deployed.
· Bring up IE and pointed http://20.x.x.x/ReportServers. It works
Problems:
When I tried to connect from outside computer, it failed.
Can someone help and advice on these problems.?
View 4 Replies
View Related
Sep 17, 2007
I am able to start Report Builder from the Reports site.
Report Builder opens but then it asks to "Select site or server", I don't see any data sources or anything, I can only enter a site or server. I tried http://crossdatabase/Reports and http://crossdatabase/ReportServer and http://crossdatabase nothing works. What's more, when I cancel and then click on the open button I get an exception:
Code Snippet
See the end of this message for details on invoking
just-in-time (JIT) debugging instead of this dialog box.
************** Exception Text **************
System.NullReferenceException: Object reference not set to an instance of an object.
at Microsoft.ReportingServices.ReportBuilder.CatalogItemDialog.OnLoad(EventArgs e)
at System.Windows.Forms.Form.OnCreateControl()
at System.Windows.Forms.Control.CreateControl(Boolean fIgnoreVisible)
at System.Windows.Forms.Control.CreateControl()
at System.Windows.Forms.Control.WmShowWindow(Message& m)
at System.Windows.Forms.Control.WndProc(Message& m)
at System.Windows.Forms.ScrollableControl.WndProc(Message& m)
at System.Windows.Forms.ContainerControl.WndProc(Message& m)
at System.Windows.Forms.Form.WmShowWindow(Message& m)
at System.Windows.Forms.Form.WndProc(Message& m)
at System.Windows.Forms.Control.ControlNativeWindow.OnMessage(Message& m)
at System.Windows.Forms.Control.ControlNativeWindow.WndProc(Message& m)
at System.Windows.Forms.NativeWindow.Callback(IntPtr hWnd, Int32 msg, IntPtr wparam, IntPtr lparam)
************** Loaded Assemblies **************
mscorlib
Assembly Version: 2.0.0.0
Win32 Version: 2.0.50727.832 (QFE.050727-8300)
CodeBase: file:///C:/WINDOWS/Microsoft.NET/Framework/v2.0.50727/mscorlib.dll
----------------------------------------
ReportBuilder
Assembly Version: 9.0.242.0
Win32 Version: 9.00.3042.00
CodeBase: file:///C:/Documents%20and%20Settings/Administrator.VDBRANDE/Local%20Settings/Apps/2.0/97YHGD67.7XE/97YX7M5J.5E2/repo..tion_c3bce3770c238a49_0009.0000_827b297b08a11874/ReportBuilder.exe
----------------------------------------
System.Windows.Forms
Assembly Version: 2.0.0.0
Win32 Version: 2.0.50727.832 (QFE.050727-8300)
CodeBase: file:///C:/WINDOWS/assembly/GAC_MSIL/System.Windows.Forms/2.0.0.0__b77a5c561934e089/System.Windows.Forms.dll
----------------------------------------
System
Assembly Version: 2.0.0.0
Win32 Version: 2.0.50727.832 (QFE.050727-8300)
CodeBase: file:///C:/WINDOWS/assembly/GAC_MSIL/System/2.0.0.0__b77a5c561934e089/System.dll
----------------------------------------
System.Drawing
Assembly Version: 2.0.0.0
Win32 Version: 2.0.50727.832 (QFE.050727-8300)
CodeBase: file:///C:/WINDOWS/assembly/GAC_MSIL/System.Drawing/2.0.0.0__b03f5f7f11d50a3a/System.Drawing.dll
----------------------------------------
System.Deployment
Assembly Version: 2.0.0.0
Win32 Version: 2.0.50727.832 (QFE.050727-8300)
CodeBase: file:///C:/WINDOWS/assembly/GAC_MSIL/System.Deployment/2.0.0.0__b03f5f7f11d50a3a/System.Deployment.dll
----------------------------------------
System.Web
Assembly Version: 2.0.0.0
Win32 Version: 2.0.50727.832 (QFE.050727-8300)
CodeBase: file:///C:/WINDOWS/assembly/GAC_32/System.Web/2.0.0.0__b03f5f7f11d50a3a/System.Web.dll
----------------------------------------
System.Web.Services
Assembly Version: 2.0.0.0
Win32 Version: 2.0.50727.42 (RTM.050727-4200)
CodeBase: file:///C:/WINDOWS/assembly/GAC_MSIL/System.Web.Services/2.0.0.0__b03f5f7f11d50a3a/System.Web.Services.dll
----------------------------------------
System.Xml
Assembly Version: 2.0.0.0
Win32 Version: 2.0.50727.832 (QFE.050727-8300)
CodeBase: file:///C:/WINDOWS/assembly/GAC_MSIL/System.Xml/2.0.0.0__b77a5c561934e089/System.Xml.dll
----------------------------------------
System.Configuration
Assembly Version: 2.0.0.0
Win32 Version: 2.0.50727.832 (QFE.050727-8300)
CodeBase: file:///C:/WINDOWS/assembly/GAC_MSIL/System.Configuration/2.0.0.0__b03f5f7f11d50a3a/System.Configuration.dll
----------------------------------------
yicgob7u
Assembly Version: 9.0.242.0
Win32 Version: 2.0.50727.832 (QFE.050727-8300)
CodeBase: file:///C:/WINDOWS/assembly/GAC_MSIL/System/2.0.0.0__b77a5c561934e089/System.dll
----------------------------------------
g5yh0wut
Assembly Version: 9.0.242.0
Win32 Version: 2.0.50727.832 (QFE.050727-8300)
CodeBase: file:///C:/WINDOWS/assembly/GAC_MSIL/System/2.0.0.0__b77a5c561934e089/System.dll
----------------------------------------
a0wegfwe
Assembly Version: 9.0.242.0
Win32 Version: 2.0.50727.832 (QFE.050727-8300)
CodeBase: file:///C:/WINDOWS/assembly/GAC_MSIL/System/2.0.0.0__b77a5c561934e089/System.dll
----------------------------------------
************** JIT Debugging **************
To enable just-in-time (JIT) debugging, the .config file for this
application or computer (machine.config) must have the
jitDebugging value set in the system.windows.forms section.
The application must also be compiled with debugging
enabled.
For example:
<configuration>
<system.windows.forms jitDebugging="true" />
</configuration>
When JIT debugging is enabled, any unhandled exception
will be sent to the JIT debugger registered on the computer
rather than be handled by this dialog box.
I run the Report Builder on the server so there should be no connection problems.
Thanks for any tips.
View 4 Replies
View Related
Aug 11, 2007
I have unable to deploy Sql Server Report as I am getting an error while deployment "A connectin could not be made to the report server http://localhost/reportServer" where as i have created virtual directory for repotServer in IIS . Can anyone plz help me out to resolve this problem ?
View 8 Replies
View Related
Jun 9, 2007
Hi Guys,
I am working on MS Reporting Services...
This is the error I get
The attempt to connect to the report server failed. Check your connection information and that the report server is a compatible version.
The request failed with HTTP status 404: Not Found.
The following is the code(Its an aspx code).
<rsweb:ReportViewer ID ="SummarReportViewer" runat="server" Height ="760px" Width="1076px" ProcessingMode="Remote" ShowParameterPrompts="False">
<ServerReport ReportPath="/Pages/Report.aspx?ItemPath=/TestForecastReports/SummaryReport"
ReportServerUrl="http://ricsqltest2/Reports
" />
</rsweb:ReportViewer >
I am able to access the report when I hit @ http://ricsqltest2/Reports /Pages/Report.aspx?ItemPath=/TestForecastReports/SummaryReport
I also changed the code in C:Program FilesMicrosoft SQL ServerMSSQL.4Reporting ServicesReportManagerRSWebApplication.COnfig to
<Configuration>
<UI>
<ReportServerUrl>http://ricsqltest2/Reports</ReportServerUrl>
<ReportServerVirtualDirectory></ReportServerVirtualDirectory>
<ReportBuilderTrustLevel>FullTrust</ReportBuilderTrustLevel>
</UI>
****
****
****
</Configuration>
Can any One plz help me out.
Thanks & Regards,
Mansoor.
View 3 Replies
View Related
May 9, 2007
OK, I am not a programmer, but administrate the Report Server and its security. The .NET programmers want to connect direct to Report Server using WEB.CONFIG settings (see below).
<appSettings>
<add key="ConnectionString" value="Server=bpatlqddwatlqddw01;Database=MP2_NET_STAGE;Integrated Security=False;User ID=MP2_Net;Password=xxxxx;Persist Security Info=false"/>
<add key="LogPath" value="\bpga030wde01wwwroot$MP2_NetLogs"/>
<add key="Url" value="http://bpga030wde01/MP2_Net/" />
What do I need to do to ensure their dynamic reports can run against my Report Server? What kind of rights do I assign the "MP2_Net" (above) login? All of this is outside the IIS-Report Server security environment? Do I assign rights via SQL Mgr? I cannot find any doco on this process.
View 2 Replies
View Related
Jan 5, 2007
I have RS running on Standard server 2003 I receive the follow when trying to access the main page.
The attempt to connect to the report server failed. Check your connection information and that the report server is a compatible version
I can view reports from the location below just not view the main page.
servername/ReportServer
works fine
included error log file
01/02/07 18:10:34, ERROR , SQLDUMPER_UNKNOWN_APP.EXE, AdjustTokenPrivileges () failed (00000514)
01/02/07 18:10:34, ACTION, SQLDUMPER_UNKNOWN_APP.EXE, Input parameters: 4 supplied
01/02/07 18:10:34, ACTION, SQLDUMPER_UNKNOWN_APP.EXE, ProcessID = 2364
01/02/07 18:10:34, ACTION, SQLDUMPER_UNKNOWN_APP.EXE, ThreadId = 0
01/02/07 18:10:34, ACTION, SQLDUMPER_UNKNOWN_APP.EXE, Flags = 0x0
01/02/07 18:10:34, ACTION, SQLDUMPER_UNKNOWN_APP.EXE, MiniDumpFlags = 0x0
01/02/07 18:10:34, ACTION, SQLDUMPER_UNKNOWN_APP.EXE, SqlInfoPtr = 0x4747EC40
01/02/07 18:10:34, ACTION, SQLDUMPER_UNKNOWN_APP.EXE, DumpDir = <NULL>
01/02/07 18:10:34, ACTION, SQLDUMPER_UNKNOWN_APP.EXE, ExceptionRecordPtr = 0x00000000
01/02/07 18:10:34, ACTION, SQLDUMPER_UNKNOWN_APP.EXE, ContextPtr = 0x00000000
01/02/07 18:10:34, ACTION, SQLDUMPER_UNKNOWN_APP.EXE, ExtraFile = <NULL>
01/02/07 18:10:34, ACTION, SQLDUMPER_UNKNOWN_APP.EXE, InstanceName = <NULL>
01/02/07 18:10:34, ACTION, SQLDUMPER_UNKNOWN_APP.EXE, ServiceName = <NULL>
01/02/07 18:10:34, ACTION, SQLDUMPER_UNKNOWN_APP.EXE, Callback type 11 not used
01/02/07 18:10:34, ACTION, SQLDUMPER_UNKNOWN_APP.EXE, Callback type 7 not used
01/02/07 18:10:34, ACTION, SQLDUMPER_UNKNOWN_APP.EXE, MiniDump completed: D:Program FilesMicrosoft SQL ServerMSSQL.2Reporting ServicesLogFilesSQLDmpr0001.mdmp
01/02/07 18:10:34, ACTION, ReportingServicesService.exe, Watson Invoke: No
Please help anyone.
Thanks Alan
.
View 1 Replies
View Related
Jan 18, 2008
Windows 2003 Server
My site has 2 IP addresses. My Report Server Manager was working until I updated Sharepoint to 2007.
I had installed the Report Server first, but then I installed Sharepoint to the primary IP. At that point Report Services Manager stopped working ( I can still access reports created). I want to move Report Server to the alternate IP. At that IP it's the same situation. I can run previously created reports, but cannot get to Report Manager.
When I try to access /Reports, my URL gets munged into:
http://nn.nn.nn.33/Reports/(S(rm1jwon4f33mbr45knksr0um))/Pages/Folder.aspx
and the message is
The request failed with HTTP status 400: Bad Request.
Where could those extra characters be coming from ? How can I make my Report Services Manager work again?
View 1 Replies
View Related
Apr 11, 2007
Hi -
I got through the installation hoops for SQLEXPRESS Reporting Services in Vista and set up the default configurations in Report Services Configuration. I can explore the default directory for "Reports" in IIS7, but I can't browse in IE. I get the "The report server is not responding. verify that the report server..." message in the browser. This is after I migrated the app per the initial http 500 error using the preferred method - %systemroot%system32inetservAPPCMD.exe migrate config "Default Web Site/Reports".
I'm running Vista Ultimate, VS2005, SQLEXPRESS SP2. I've tried running IE as admin and also I've disabled UAC from gpedit.msc - ...Windows SettingsSecurity SettingsLocal PolicySecurity Options and unchecking UAC.
Thanks,
Mike
View 13 Replies
View Related
Oct 11, 2005
Hi,
I am using SQL server 2000, Crystal Reports 8.5. I dont see any problem with accessing thro' VB Coding(ADODB).
Crystal Report connection thro ODBC also working fine.
But when i try to connect to database thro "More data sources" -> SQL server , i was thrown out with an error "Unable to connect to SQL server servernam"
I have uninstalled & Reinstalled both SQL server and Crystal Report. Still not working.
I have been struggling with this problem for quite a long time.
Can any one give me the solution for this ??
Regards
SRagghu
View 1 Replies
View Related
Jul 20, 2006
I am using WIN XP PRO with IIS installed. Installation (including SSRS) seems OK.
If I go into new project and select Business Infomration / New Report I can select datasource, etc, design a and get to a deployment window. Default is Report Server: http://localhost/ReportServer Deployment Folder: Report Project2
I can preview a report just fine.
If I go to Debug or Deploy I get a error message box that starts with "A connection could not be made to the report server http://localhost/ReportServer"
Am I missing a component on my system or can you suggest something else I should look at?
Thanks
View 7 Replies
View Related
Apr 7, 2008
hello there,
I appreciate any help on the following issue:
When I want to connect to a local report server on as shown in the "Reporting Services Tools" tutorial (http://msdn2.microsoft.com/en-au/library/aa337424.aspx), the SSMSE does not show the option "Reporting Services" in the "Server type" drop down list in the "Connect to server" dialog.
The tutorial says "In the Server type list, select Reporting Services. If Reporting Services is not on the list, it is not installed."
This must be wrong as the SSCM clearly shows an installed and running "SQL Server Reporting Service (...)".
Also if i call the webinterface (http://localhost/reports/) a page loads that says "SQL Server Reporting Services Home" with some options. And here something is not correct too. The "contents" tab of the report manager says "There are no items in Home."
I started to work on some basic tutorials using the sql server business development studio, and everything works fine. I can create reports, which derive data from the AdventureWorks db properly.
Can anyone tell me the adequate steps to fix the SSMSE connection problem and the webinterface view problem?
Here are some additional informations:
I use WinXP SP2, which makes the IIS version 5.1
SQL server is 2005 express with advanced features
and i installed the management toolkit, and the AdventureWorks db.
Installation history is as follows:
.NET framework 2.0 + VS2005 professional edition was installed
1. installed ss2005express+advanced features, on a named instance. worked fine. I did not install the SSMSE at this point, as i knew it is included in the toolkit too.
2. configured the reporting services through the "reporting services configuration" tool. worked fine.
3. installed the management tool kit. worked fine.
4. installed the AdventureWorks db. installed, but was not attached automaticaly to the database engine.
5. attached the AdventureWorks db to the database engine manually. worked fine, can be viewed and accessed properly.
So there I am. I have no clue what went wrong.
A last hint that makes me think is this: In the SSCM the sql server an the sql server reporting services have different instance ids (MSSQL.1 and MSSQL.2 respectively).
Thanks in advance for your solutions and hints, that is - for your time :-)
art
View 7 Replies
View Related
Aug 2, 2007
Anyone know how to get around this?
TITLE: Connect to Server
------------------------------
Cannot connect to OES-XP1007.
------------------------------
ADDITIONAL INFORMATION:
Client found response content type of 'text/html; charset=utf-8', but expected 'text/xml'.
The request failed with the error message:
--
<html>
<head>
<title>
SQL Server Reporting Services
</title><meta name="Generator" content="Microsoft SQL Server Reporting Services 9.00.3054.00" />
<meta name="HTTP Status" content="500" />
<meta name="ProductLocaleID" content="9" />
<meta name="CountryLocaleID" content="1033" />
<meta name="StackTrace" content />
<style>
BODY {FONT-FAMILY:Verdana; FONT-WEIGHT:normal; FONT-SIZE: 8pt; COLOR:black}
H1 {FONT-FAMILY:Verdana; FONT-WEIGHT:700; FONT-SIZE:15pt}
LI {FONT-FAMILY:Verdana; FONT-WEIGHT:normal; FONT-SIZE:8pt; DISPLAY:inline}
.ProductInfo {FONT-FAMILY:Verdana; FONT-WEIGHT:bold; FONT-SIZE: 8pt; COLOR:gray}
A:link {FONT-SIZE: 8pt; FONT-FAMILY:Verdana; COLOR3366CC; TEXT-DECORATION:none}
A:hover {FONT-SIZE: 8pt; FONT-FAMILY:Verdana; COLORFF3300; TEXT-DECORATION:underline}
A:visited {FONT-SIZE: 8pt; FONT-FAMILY:Verdana; COLOR3366CC; TEXT-DECORATION:none}
A:visited:hover {FONT-SIZE: 8pt; FONT-FAMILY:Verdana; colorFF3300; TEXT-DECORATION:underline}
</style>
</head><body bgcolor="white">
<h1>
Reporting Services Error<hr width="100%" size="1" color="silver" />
</h1><ul>
<li>An internal error occurred on the report server. See the error log for more details. (rsInternalError) <a href="http://go.microsoft.com/fwlink/?LinkId=20476&EvtSrc=Microsoft.ReportingServices.Diagnostics.Utilities.ErrorStrings&EvtID=rsInternalError&ProdName=Microsoft%20SQL%20Server%20Reporting%20Services&ProdVer=9.00.3054.00" target="_blank">Get Online Help</a></li><ul>
<li>Could not find stored procedure 'GetOneConfigurationInfo'.</li>
</ul>
</ul><hr width="100%" size="1" color="silver" /><span class="ProductInfo">SQL Server Reporting Services</span>
</body>
</html>
--. (Microsoft.SqlServer.Management.UI.RSClient)
------------------------------
BUTTONS:
OK
------------------------------
View 4 Replies
View Related
Dec 12, 2007
do you mean first install SDK, then install IIS, then install report sever?
I have same problem.
any can help?
View 1 Replies
View Related
