Report Server Password
May 4, 2007
I am in a panic right about now. We had to change the Admin (server) password and it is working fine to log on to Windows, but when I click on IE and navigate to the report server, it is asking me for the old password still. I am new to SRS, so I am learning as I go. I found some threads on using the rsconfig.exe and I fiddled around in it and now (in addition to requesting the old password to log on to the report server) all of the reports I created have a user name and password field that requires the SA password for connecting to the data source.
Is there any way I can fix this or do I just need to uninstall SRS from the server and re-install it? I found the following thread, but am a little skiddish about doing anything else in light of the current state I put the report server in.
https://forums.microsoft.com/MSDN/ShowPost.aspx?PostID=1031391&SiteID=1
Any suggestions?
View 1 Replies
ADVERTISEMENT
Apr 1, 2008
I have a package protected by a password - I am already unhappy that to get it to use the configuration file to change connection strings for the production servers I have had to hardcode the password into the config file - very insecure!
However, the package now deploys correctly to the production server and will run from there OK, but NOT if scheduled as a SQL Server Agent Job. Thus is because however often I edit the command line to include the password after the DECRYPT switch (which it has prompted me for when I click on the command line tab), the Job Step will not retain it.
If I open it up after I have edited it and closed it, the password has disappeared.
I know that if I run dtexec plus the code in the Command Line tab (with the password), the package runs OK.
This is driving me insane!
I have read all the other posts and so I tried replacing the SSIS package step with a CmdExec step and pasting that code into there - then I get an OLEDB error..
The code I use is:
DTEXEC /SQL "ImportRateMonitoringTables" /SERVER servername /DECRYPT password /CONFIGFILE "D:Microsoft SQL ServerSSISDeploymentsRateMonitoringImportTasksDeploymentImportRateMonitoringTables_Production.dtsConfig" /MAXCONCURRENT " -1 " /CHECKPOINTING OFF /REPORTING E
and I get
SSIS Error Code DTS_E_OLEDBERROR. An OLE DB error has occurred. Error code: 0x8000FFFF
although the same code executes perfectly from a command prompt.
Please does anyone have any experience with a similar problem and if so, how did you get round it?
Thank you
View 9 Replies
View Related
Jun 30, 2007
I tried to install an ALLDATA database which run with SQL Server 2005 express edition. The data base fails to install becase of the following code that come up which is related to AS password requirement. The error that come up is:
TITLE: Microsoft SQL Server 2005 Setup
------------------------------
The sa password must meet SQL Server password policy requirements. For strong password guidelines, see Authentication Mode, in SQL Server Books Online.
For help, click: http://go.microsoft.com/fwlink?LinkID=20476&ProdName=Microsoft+SQL+Server&ProdVer=9.00.2047.00&EvtSrc=setup.rll&EvtID=28001&EvtType=sqlca%5csqlcax.cpp%40SAPasswordPolicyCheck%40SAPasswordPolicyCheck%40x6d61
------------------------------
BUTTONS:
&Retry
Cancel
------------------------------
I am trying to install this database in a network server operating under Windows Server 2003 R2 with SP2. If anyone knows how to solve this problem, please let me.
Thanks,
Amilcar
View 6 Replies
View Related
Sep 28, 2007
In SRS is there a simiple way to password protect a report? Or will I need to handle this in ASP?
View 4 Replies
View Related
Mar 5, 2008
We have a few reports that we would like to require the user to enter a password before they can view the report. Is there a way to do this?
Thank You
Kaysie
View 4 Replies
View Related
Apr 2, 2008
Hi,
I have started using SQL Server 2005 Reporting Services. I am using SQl Server authentication where user has to supply username and password .I want to know can I Pass the SQL authentication username and password in the URL as a parameter to report.
Nikhil Jahagirdar
View 1 Replies
View Related
Mar 14, 2008
Is there any way to Remembering the username and password on report manager?
I have set the credentials to "Credentials supplied by the user running the report" ...
cant use the Windows credentials for some reasons...
View 4 Replies
View Related
Nov 5, 2015
After publishing report on server and accessing it from URL its prompting for the USER ID and pAssword of Admin user of the server. Have tried to find the Virtual Directory of the Reporting server on IIS - which is not available. or unable to find the same. Apart from this have saved the Database credential in the report itself.Â
View 5 Replies
View Related
Mar 3, 2005
I have an internal Project Management and Scheduling app that I wrote internally for my company. It was written to use MySQL running on a Debian server, but I am going to move it to SQL Server 2000 and integrate it with our Accounting software. The part I am having trouble with is the user login portion. I previously used this:
PHP Code:
$sql = "SELECT * FROM users WHERE username = "$username" AND user_password = password("$password")";
Apparently the password() function is not available when accessing SQL Server via ODBC. Is there an equivalent function I could use isntead so the passwords arent plaintext in the database? I only have 15 people using the system so a blank pwd reset wouldn't be too much trouble.
View 7 Replies
View Related
Jul 24, 2015
I have connected to Database using my credentials by checking remember password option. After few days I forgot my password. How can I recover the password as SQL remember it. Is there any way to recover my password instead of resetting it.
View 3 Replies
View Related
Jun 18, 2007
I am receiving the following error message when attempting to create a new SQL Authenticated login id.
Password validation failed. The password does not meet the requirements of the password filter DLL. (Microsoft SQL Server, Error: 15119)
I have four servers all running SQL Server 2005 SP2 on Windows 2003 Ent. SP1. Of the four servers, only one received the above error message using the same TSQL below.
CREATE LOGIN TEST_LOGIN WITH PASSWORD = 'pvif9dal' MUST_CHANGE, CHECK_EXPIRATION = ON
All four servers are in the same domain, which if I understand correctly, the password policies are therefore inherited at the OS level by the domain. The password being used is within the password policies of the domain.
Any ideas as to a root cause?
View 5 Replies
View Related
Jun 16, 2006
SQL server 2005 express reporting problem.
error message:
This feature "remote access to report data sources and/or the report server database" is not supported in this edition of reporting service
I got this error message when I try to connect to database hosted in another PC running SQL server 2000.
Is it true that SQlL server Express can only use Local Database Engine to host the database?
View 5 Replies
View Related
Mar 11, 2008
On the login prompt for Report Server, there is a checkbox option to "Remember my Password." I check this, login successfully... but when returning to the Report Server, I am again prompted for the password, although the user name is saved. No matter how many times I do this, the password will not save in IE7. I have tried this on 3 different computers with IE7. In IE 6, I do not even get the checkbox as an option, just the user name/password prompt. In Firefox, the password saves fine. Any ideas what would be causing this?
Thanks,
Brian
View 1 Replies
View Related
Sep 9, 2006
Hi My project is in .NET 2003 i.e. framework 1.1 and database in SQLServer 2000. But the reports have been developed using SQLServer 2005 Reporting Services. Now when I am trying to deploy them through deployment project of .NET its giving me following error:"Using other editions of SQL Server for report data sources and/or the report server database" is not supported in this edition of Reporting Services. Now I am really confused with this. Can any one please guide me regarding this ASAP. Thanks, Falguni
View 4 Replies
View Related
Apr 11, 2007
Hi -
I got through the installation hoops for SQLEXPRESS Reporting Services in Vista and set up the default configurations in Report Services Configuration. I can explore the default directory for "Reports" in IIS7, but I can't browse in IE. I get the "The report server is not responding. verify that the report server..." message in the browser. This is after I migrated the app per the initial http 500 error using the preferred method - %systemroot%system32inetservAPPCMD.exe migrate config "Default Web Site/Reports".
I'm running Vista Ultimate, VS2005, SQLEXPRESS SP2. I've tried running IE as admin and also I've disabled UAC from gpedit.msc - ...Windows SettingsSecurity SettingsLocal PolicySecurity Options and unchecking UAC.
Thanks,
Mike
View 13 Replies
View Related
May 25, 2007
Hi every one,
I'm very new new at this. I'm try to deploy a report model and got this message. I have no idea what its going on about.
Can anyone help me?
Aku
------------------------------
System.Web.Services.Protocols.SoapException: The report server cannot decrypt the symmetric key used to access sensitive or encrypted data in a report server database. You must either restore a backup key or delete all encrypted content. Check the documentation for more information. (rsReportServerDisabled) ---> Microsoft.ReportingServices.Diagnostics.Utilities.RPCException: The report server cannot decrypt the symmetric key used to access sensitive or encrypted data in a report server database. You must either restore a backup key or delete all encrypted content. Check the documentation for more information. (rsReportServerDisabled) ---> System.Exception: The report server cannot decrypt the symmetric key used to access sensitive or encrypted data in a report server database. You must either restore a backup key or delete all encrypted content. Check the documentation for more information. (rsReportServerDisabled) ---> System.Exception: The report server cannot decrypt the symmetric key used to access sensitive or encrypted data in a report server database. You must either restore a backup key or delete all encrypted content. Check the documentation for more information. (rsReportServerDisabled) ---> System.Exception: The report server cannot decrypt the symmetric key used to access sensitive or encrypted data in a report server database. You must either restore a backup key or delete all encrypted content. Check the documentation for more information. (rsReportServerDisabled) ---> System.Exception: The report server cannot decrypt the symmetric key used to access sensitive or encrypted data in a report server database. You must either restore a backup key or delete all encrypted content. Check the documentation for more information. (rsReportServerDisabled) ---> System.Exception: Bad Data. (Exception from HRESULT: 0x80090005)
--- End of inner exception stack trace ---
--- End of inner exception stack trace ---
--- End of inner exception stack trace ---
--- End of inner exception stack trace ---
--- End of inner exception stack trace ---
at Microsoft.ReportingServices.Diagnostics.DataProtection.ProtectData(Byte[] unprotectedData, String tag)
at Microsoft.ReportingServices.Library.ConnectionManager.ConnectStorage()
at Microsoft.ReportingServices.Library.Storage.NewStandardSqlCommand(String storedProcedureName)
at Microsoft.ReportingServices.Library.DBInterface.GetAllConfigurationInfo()
at Microsoft.ReportingServices.Library.RSService.GetSystemProperties(Property[] requestedProperties)
at Microsoft.ReportingServices.WebServer.ReportingService.GetSystemProperties(Property[] Properties, Property[]& Values)
--- End of inner exception stack trace ---
at Microsoft.ReportingServices.WebServer.ReportingService.GetSystemProperties(Property[] Properties, Property[]& Values) (System.Web.Services)
------------------------------
BUTTONS:
OK
------------------------------
View 38 Replies
View Related
Dec 5, 2007
every 1 hour my server's computer is restarting !
when the windows finish restarting i open the Event viewer and see that what coused it is the error :
"Report Server Windows Service (MSSQLSERVER) cannot connect to the report server database."
Event 107
source : "Report Server Windows Service (MSSQLSERVER)"
How can i solve it ?
View 4 Replies
View Related
Dec 12, 2007
do you mean first install SDK, then install IIS, then install report sever?
I have same problem.
any can help?
View 1 Replies
View Related
Jun 12, 2007
I have a complicated question that involves the password policy defined within Windows Server 2003 and how it is used in Microsoft SQL Server 2005. I recently installed windows server 2003 on my development system. I am a person that prefers to develop in the same OS that our application runs in production. After installing 2003, then a Domain administrator added my machine to our corporate domain. Now, I cannot change the local password policy to allow a simple password. I believe this is due to policy inheriting from the domain that the machine belongs to.
This ties back into SQL Server 2005 because installing sql server on a Server 2003 causes SQL Server 2005 to follow the password policies defined at the OS level. This breaks our application in a subtle way in that we create login accounts for new client databases with random password. Because the password is random it sometimes conforms to the policy and sometimes not.
In production environments, the password policies are configured differently. So I need to one of the following options:
-change the group policy/inherited policy on my machine to not inherity from the domain I joined (prefered solution but don't know HOW)
-change SQL Server to not use OS password policy
-change code to use CREATE LOGIN statement with CHECK_POLICY=OFF or change password generation code to use a stronger password. (don't want to do this as the code change is only accomodating non-production environments)
If someone has a better place to post this question, I would sure appreciate it.
View 1 Replies
View Related
Oct 9, 2007
When I trying to configure Reposrting services in IIS & XP. It hsows me error
"The report server is not responding. Verify that the report server is running and can be accessed from this computer."
I also configure with reposrting configuration tools which show all confuguration is perfect.
but when I try to open through IE http://localhost/Reports/Pages/Folder.aspx
or http://localhost/Reportserver
It shows error. I try all ways still not works ..Help me out
Thanks.
View 9 Replies
View Related
Mar 30, 2007
I would like to know if it is possible to have different applications on separate report servers sharing one report server database. If so are there possible issues or ptfalls to this type of architecture?
Thanks,
thecoleman
View 3 Replies
View Related
Jun 2, 2014
I put this together to export the user name /password to a csv file to test my SP to output the user name/password.
DECLARE @user_name varchar(50)
DECLARE @psswrd varchar(10)
SELECT @user_name ,@psswrd
FROM ngweb_bulk_enrollments
EXEC master.dbo.xp_cmdshell 'bcp NGDevl.dbo.ngweb_bulk_enrollments out C: est.csv -Sserver1 -T -t, -r
-c'
This works but I don't get the headers in the file. How can I include the headers?
View 7 Replies
View Related
Oct 6, 2005
Hi,I have developed site which has a resource file which connects to sqlserver using login name and password.Now my client doesn't want me to login to production database. bu the packing of the system is with me. is there any way to solve this issuse so that i can package the software without knowing database login name and password.TIAAmit
View 2 Replies
View Related
Jan 13, 2000
I read in Computer Weekly (Jan 6th 2000) about a bug in SQL Server 7. This means that any user can get hold of the administrator (sa) password.
Does anyone know anything more about this ??
thanks
Paul
View 2 Replies
View Related
Jan 15, 2001
Hi,
I reset user passwords on SQL Server 6.5 when users forget them. How can I do this without
using Enterprise Manager? Is there a stored procedure that I can call from iSQL?
Thanks,
girija
View 1 Replies
View Related
Mar 11, 2008
Hi All,
we plan to change SA password and there are 2 servers running on replication.
what are the precautions that i have to consider?
what is the fallback plan should changing SA password causing other error/ bugs?
can somebody tell me the exact steps to change SA password for this kind of environment?
thanks in advance.
-Nonie
Nonie
View 6 Replies
View Related
Jul 23, 2005
This has to be a simple question for most of you, so here goes.My passwords for sa and another login that I created keep resetting.How can I turn off password expiration in SQL Server 2000?Thanks!MB
View 4 Replies
View Related
Apr 3, 2007
Dear All,
Greets for the day,
This is the first time I am using SQL Server 7.0 on a bussiness machine, I need to apply password on the database, OS is windows XP professional, need u r help on this.
View 1 Replies
View Related
Apr 8, 2008
Hello guys,
I have developed a stored procedure that create linked server. The problem is:
to crearte the linked server I need to pass user and password. How can I pass user and password in a encrypted way.
I think that if the stored proc execute: addlinkedserver procedures with user and password, these are readable to everybody with sniffer or SQL profile.
How can I pass encrypted password to SQL server engine to create a linked server?
Thank
View 4 Replies
View Related
Oct 12, 2007
I am trying to find out how to hide/obscure a password in SQL server. Currently the passwords are being held as a text field, which means that anyone who queries the table or just opens it can see everyones passwords.
Is there some way of hiding this? I have been searching for ages and can't seem to find anything.
Thanks
View 8 Replies
View Related
Apr 8, 2008
Hello guys,
I have developed a stored procedure that create linked server. The problem is:
to crearte the linked server I need to pass user and password. How can I pass user and password in a encrypted way.
I think that if the stored proc execute: addlinkedserver procedures with user and password, these are readable to everybody with sniffer or SQL profile.
How can I pass encrypted password to SQL server engine to create a linked server?
Thank
View 6 Replies
View Related
May 7, 2008
***SSRS 2000 ISSUE***
Hi All
Recently, several of our users have started to experience issues with hyperlinks in a report. I have created a textbox added navigation and selected the report to 'jump to' and the users are getting this error:
The specified server url does not link to the report server for this report manager or is not in the correct format
I have changed this to a an url but the error persists - there is nothing on google or MSDN that i can find which relates to this error so im kinda stuck with this one! The error is not affecting all users, just a small subset of them. Each of the users has different AD rights with one of them being a Domain Admin so i dont think it is a security issue.
the hyperlink which is being built is this :
http://<SERVERNAME>/SQLReports/Pages/Report.aspx?ServerUrl=http%3a%2f%2f<SERVERNAME>%2fReportServer%3f%252f<SERVERNAME>%252fS<REPORTNAME>
*obviously the <SERVERNAME> and <REPORTNAME> are not real server or report names - im just being cautious by not including this detail on a forum post.
Report manager is installed on several machines as part of a webfarm but this has not caused any problems in the past (i have over 200 reports under my belt thus far)
....Anyone have any ideas?
View 8 Replies
View Related
Jul 5, 2007
Hi
I went to my comp ->rt cick->manage-IIS->default website->rt click->properties->directory security->annoymouse access€¦EDIT->under Default domain it was blank, and i added a domain there.
And i was getting error opening up the reports from localhost.
I changed everything to same as it was previosly, and I am getting the error:
The report server cannot open a connection to the report server database. A connection to the database is required for all requests and processing. (rsReportServerDatabaseUnavailable) (rsRPCError) Get Online Help
Cannot open database "ReportServer$SQLExpress" requested by the login. The login failed. Login failed for user 'NGESComputer name$'.
View 1 Replies
View Related
