In old school COBOL Reports you'd often see a header row that would be something like
Line1: CustomerID
Line2: Customer Name
Detail1: 0156784613
Detail2: Jane, Doe
Can that be done with reporting services?
If I have a group in a table, can I make that group cover two rows?
I have a matrix table with row groups of a date and addresses and also a column group which produces 3 columns and values with in these column.I have a "Total" column based on a Count of the column groups which gives a number.How do you hide all rows where the "Total" column is less then 1? There will be results which still needs the date and addresses groups.
As the page only has 21cm and the report grows horizontally, I need to repeat the WHOLE report with all of its sections after every 4 customers. So if I have 5 customers, there would be three pages(let's say every subreport takes 1 page) for the first four customers, and then another three pages(with every section once again) just for one customer.
Is it possible? It doesn't seem somehing out of the ordinary, but I can't figure how to make it work. Everytime there is more than 4 customers, the report breaks its layout trying to accommodate the records in a new table below the tables of each subreport.
The expected result would be to bring all of exceeding data to new pages.
I have a report in SSRS2012. It was copied from SSRS2005 quite recently, as we have upgraded. The SQL developer said that it didn't need any code changes, as he had some kind of tool to test code problems between the two versions. The report has a table, with 5 row groups, and one detail row. The table is setup as follows:
Name Sales Costs Profit
Group1 Group2 Group3 Group4 Group5 DetailsRow
When I run this report using the Report Manager website from SSRS2005, and then export to Excel 2013, I get the 6 row groups in Excel, no problem whatsoever. I can drill into each group in Excel, using the group drilldown column on the left hand side. This works the same as the Report Manager website.
If I run the exact same report from the Report Manager website in SSRS2012, the Report Manager result is the same as SSRS2005 - all the row groups are present, and the drilldown works fine. However, the export to Excel has issues with the groups. There are only 3 row groups showing in Excel, along with a column group added for no apparent reason.
Drilling into each group shows inconsistent details, and there is no apparent logic as to what is shown within each group. I should also mention, that this issue with groups is seen on all my reports which have groups, not just this report.
I am in the process of creating a Report, and in this, i need ONLY the row groups (Parents and Child).I have a Parent group field called "Dept", and its corresponding field is MacID.I cannot create a child group or Column group (because that's not what i want).I am then inserting rows below MacID, and then i toggle the other rows to MacID and MacID to Dept.
Is there a way to combine groups that you've set up in a report?
For example:
I am pulling information that is entered by a form. The 4 possibilities are (blank), Y, N, and P, which has been made into a group to uniformly sort these options with a sum of how many users have each answer:
(blank) 10 P 20 Y 35 N 100
However, (blank) and N are pretty much the same thing...so I'd like to combine those results like this:
Please, i need a very urgent help, for this question... tkssss :-)
I need to create a report with dynamic columns. I try use Matrix, but in this time, i dont konw how to calcutate the subtotal e groups in the correct way.
The data for generate the report ( http://xs116.xs.to/xs116/07233/DataReport.JPG ) This is the actual report ( 2 rows groups and 1 columns group ) ok, but how group dates now ? ( http://xs116.xs.to/xs116/07233/ReportInvalid.JPG The correct report i need( if is possible?) (http://xs116.xs.to/xs116/07233/ReportOK.JPG) I need group by Filial (idFilial) Dates (Dta) and inside dates the Dispositivos(NomeDispositivo or IdDispositivo) of the date.... and finally total all by group Filial (idFilial)...
I have a report with some groups which can all be expanded/collapsed by clicking on a textbox with an action attached to it. The example I used can be found here: http://forums.microsoft.com/MSDN/ShowPost.aspx?PostID=600583&SiteId=1
But I want to hide the row containing this textbox (or the textbox itself) on the actual printed report. Is there any report item that can tell me if the report is in preview phase, or can it be solved in any other way?
I have a simple matrix with a row group that is basically a name. I want to sort a list of 10 or so names based on a count. I also have a column grouping -basically 1 years worth of month end dates. I want to sort on the count on the most recent date, so I set the expression to:
I am in middle of my transformation where I have to assign records equally among 3 different groups. I can do that in SQL using NTILE() Over() function. How do I do that in SSIS package. I have applied different business rules during transformation to get unique records and now I have to assign those records to 3 group in and generate excel report.Basically, I will need to have another column which will have those group numbers.
I have a new SQL 2005 (SP2) Reporting Services server to which I've just upgraded and deployed some SSRS 2000 reports.
I have a subreport that contains a matrix with two groups. The report data seems to be inexplicably repeating the data for the first row in the group for all rows in the group. Example:
ID1 ID2 DisplayData
1 1 A
1 2 B
1 3 C
2 1 A
2 2 B
2 3 C
Parent group is on ID1, child group is on ID2, report would show:
1 1 A
2 A
3 A
2 1 A
2 A
3 A
Is this a matrix bug in 2005 SP2, or do I need to do something differently? I can no longer pull a comparison version from an SSRS 2000 server to verify, but I believe it was working as expected before...
I have a requirement to display the total of a Group after subtracting a specific value from the same Group.
Example: Say the below data is grouped on a particular column
Group Values Month
Jan-15 Feb-15 Mar-15
A 10 20 30 B 5 10 25 C 1 2 3 D 5 10 15
Total 11 22 33
Formula is : Sum(A+C+D)- Sum(B)
What is the best way to Group the above scenario from SSRS level and display the result as shown above. I am able to display all the values except the last total row where am displaying the complete total i.e. 21 42 73.
How do I dynamically subtract the values for row B which is one of the group values.
I just created a report builder. I have a main report and i wanted to create a sub report. why i cant or i cant view the path or the folder of my .rdl file to be use as my sub report.
Hello. I am trying to write a report that pulls information in from Active Directory. I have a view created that gets a listing of users and a view that creates a listing of user groups, but I can't seem to figure out how to get all user groups that are associated with the users. This is what I have.
SELECT TOP 100 PERCENT * FROM OPENQUERY(ADSI, 'SELECT cn, groupMembershipSAM FROM ''LDAP://wmdomain.local'' WHERE objectcategory=''group''') Rowset_1
SELECT * FROM OPENQUERY(ADSI, 'SELECT title, displayName, sAMAccountName, givenName, telephoneNumber, facsimileTelephoneNumber, sn FROM ''LDAP://wmdomain.local'' WHERE objectCategory = ''Person'' AND objectClass = ''user''') Rowset_1
I have done the following and a domain user would not access report created a login to the SQL server to the user (this SQL Server is where data source DB is)went to site setting in Report Manager and made this use a system userright clicked on report folder and made this user in the browser roleeven checked that in the report in question, the user is already in the browser role Still the user would not access the report! "User .......... does not have required permission" is the error message I am getting.
I have written a report visual studio. The report has 10 multi-value parameters that pull data from their individual data sets within the reports. When running the report from within Visual Studio it renders fine. There are no errors reported, only a warning related to a pathname I have use to retrieve image data and display on the report.Deployment of the report is error free.When I view the report I briefly get the "Loading" splash window, but then nothing. None of the headers or static text is displayed. The results window is blank.
The report defaults all the parameter values. In trying to debug the issue I have found by reducing the number of parameter values the report will render. Once I have all the values added, the report does nothing.Below is the query being used for the report. The where clause in the query shows the parameters being used and the syntax.We are running on Windows Server 2008 R2 and SQL Server 2008 R2.
Ralph SELECT RTRIM(a.ITEMNMBR) AS Style, RTRIM(a.ITEMDESC) AS Description, a.ITMSHNAM AS UPC, c.LOCNCODE AS Store, d.LISTPRCE AS ListPrice, a.CURRCOST AS Cost, a.USCATVLS_1 AS [Main Category], a.USCATVLS_2 AS Market, a.USCATVLS_3 AS [Alternate Retail], a.USCATVLS_4 AS Country, b.ITEMXTRAS_1_Type AS Type, b.ITEMXTRAS_2_Finish AS Finish, b.ITEMXTRAS_3_SubCategory AS SubCategory, b.ITEMXTRAS_4_Department AS Department,
We are about to implement SSRS reports (SQL Server 2012), and have found one issue we don't like. The report looks great when we open it in pdf format. However, when we open it in Excel format, we want it to be the raw data, not look like the pdf report. I tried the simpl headers, and that removed the page header/footer. However, the report format was still in play.In other words, we would like the report when opened in Excel, to look just like it does when we open it as a CSV.I have tried to modify the config file a couple of times. Here is my latest attempt:
Essentially I have set Visible = "false" for the Excel type, and tried to duplicate the CSV, changing the name to make it look to the user like it is "Excel". This fails. I checked the event viewer, and I see two entries.. The RSReportServer.config file has been modified. (Information)The value for UrlRoot in RSReportServer.config is not valid. The default value will be used instead.I literally took the file, opened it in Notepad, pasted in my changes, from another notepad window, and tried to run the report. I did not see EITHER of the two names I expected, using the OverrideNames tag. As I said earlier, I was able to affect the outcome, by setting SimpleHeaders to true (or however it is identified). That did work in that the page header and footer was removed.
I have a ssrs report having 2 tables in with 4 columns in each. When I go to export option in preview I can see all data coming in one excel sheet, But I am trying to get 2 tables in 2 different pages in Excel when I export.First page of excel comes with first table data with 4 columns and second page of excel comes with second table data with 4 columns .
I am working on reports in SSRS 2008 (not R2)... There are some reports with parameters that are hidden when the report is accessed through normal URL using ReportViewer.asx..The thing is that these hidden parameters need to be visible when the report is accessed using SSRS Report Manager.
I'm wondering how to print a SSRS report without bringing up a report viewer. Is there way to print(PDF format) the SSRS report in the web application( .net ) directly from the "print" button without bringing up a report viewer?
I have a report builder drill down report. I have row groups with totals. It looks like the attached. The problem is when the report is not expanded the Grand Totals column is not accurate... it is displaying the totals of one of the rows when expanded.The expression in the Total Show text box is
I have few reports under different folders in Report Manager. Is there a way to set the data source for the whole folder rather than each report individually? There is also a folder where reports generate dynamically. Since the report project doesn't exist anymore, I can't set the data source through code. How can I set the data source for the whole folder?
I was able to log in to SSRS report manager. But i was unable to run a report i designed on report builder.
It prompts for login when i wanted to run the report and i used the same windows authentication to sign in
It will show me the parameters but when i click on view report it gives this error
"Data source 'DataSource1': An error has occurred.
Details: Microsoft.ReportingServices.ReportProcessing.ReportProcessingException: Cannot create a connection to data source 'DataSource1'. ---> System.Data.SqlClient.SqlException: Login failed for user 'Acc-11Admin'."
I want to repeat line on each page of report on PDF while using 2 columns on report. The problem is that if i use table border it will also repeat after second table. i want a line between two tables.
We are generating excel report using report viewer at run time but if excel report having more then 65000 record generating error Microsoft. Reporting Services.OnDemandReportRendering.ReportRenderingException: Excel Rendering Extension: Number of rows exceed.
I am trying to develop a report from cube,and it has one drill through report.when i click on sales amount field on main report,then it open the drill through report with details.Here i passed the **(category,subcat,product)parameters(Cascaded)** to drill through report in action part of main report.In my main report i have two columns .
when i click on 100, parameters are passed & it open the detail report correctly, but when i click on 50,the values for subcat parameter is not getting values in detail report and same as the product also.
How do I get data on my linked report based on my grouped subtotal and grand total from the main report. The subtotal and grand total are calculated columns.
I have a 3 columns in my matrix in the SSRS summary report. Actn_COAST, ActnCITY and NumbOfAccts.
The following is code for my summary report. The results are shown below.
SELECT Distinct ActnCITY, Count(ACCT) as NumbOfAccts, CASE WHEN ActnCITY in ('NY', 'OH', IN, 'NJ', 'SC', 'NC') THEN 'EAST COAST' WHEN ActnCITY IN ('CA'. 'NV', 'UT', 'WA', 'OR') THEN 'WEST COAST' ELSE 'OTHER' END AS Actn_COAST
FROM tbl1 where ACTNDATE between @STARTDT and @EndDT
Code for my detail report contains the following SQL
SELECT * FROM tbl1 where ACTNDATE between @STARTDT and @EndDT AND @ActnCITY = ActnCITY
I have linked my report based on the NumbOfAccts column. I am able to get data if I click any of the NumbOfAccts values related to the state I want. However when I am not sure how to make the subtotal and grand total work. I want when I click on the subtotal of either coast, I should be able to see records of that coast e.g., if I select 37 I should be able to see all the records in East Coast. If I click on the Grand Total, I only want data related to those 2 coasts.
Is there a way to subscribe SSRS report using dynamic parameters for email and trigger the report from autosys job so that report should generate the exact time the job is triggered.Let me describe, my SSRS report should be triggered on success of one autosys job. i need to send email parameter and time of report schedule from this autosys job.