Report Services Multiple Subreports

Sep 6, 2007

Hi
I can add a single subreport to a report using the code


Protected Sub Page_Load(ByVal sender As Object, ByVal e As System.EventArgs) Handles Me.Load

AddHandler ReportViewer1.LocalReport.SubreportProcessing, AddressOf SetSubDataSource

reportViewer1.LocalReport.Refresh()

End Sub

Public Sub SetSubDataSource(ByVal sender As Object, ByVal e As SubreportProcessingEventArgs)

e.DataSources.Add(New ReportDataSource("DataSet1_tblReportExport", ObjectDataSource1))

End Sub


but i cant add anymore as when i try i get the error

Error: subreport cannot be shown.

Anyone knownhow i add another subreport?

Thanks a lot for your time

View 4 Replies


ADVERTISEMENT

Reporting Services :: Error When Exporting Report With Multiple Subreports To PDF

Oct 23, 2015

I have a report in SSRS 2008 R2 that has multiple subreports, in fact the report uses the same subreport twice with different parameters.  Then that subreport also has a subreport, which has a subreport.  (It's a complex data scenario with a hierarchy that can go up to three layers deep.)  The report renders fine in report viewer, but when I try to export to PDF I get the following error:

Object reference not set to an instance of an object.

Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code.

Exception Details: Microsoft.Reporting.WebForms.ReportServerException: Object reference not set to an instance of an object.

Source Error: An unhandled exception was generated during the execution of the current web request. Information regarding the origin and location of the exception can be identified using the exception stack trace below.

[Code] ....

Each subreport renders correctly to PDF, and if I remove either subreport from the main report, it also renders correctly.  But the two subreports together on the report cause the error.

Removing the third hierarchy layer (the final one) fixes the issue.  Is there a limit to the number of nested subreports when rendering to a pdf?

View 2 Replies View Related

Combining Multiple Subreports Into A Single Report

Oct 2, 2006

The goal is to produce a single PDF consisting of a number of subreports. Some are landscape, others are portrait. The subreports may also be run as independent reports. The master report that contains them defaults to the width of the widest subreport, which is landscape. This causes all portrait subreports to spill over producing blank pages. Are there any work-arounds to concatenate multiple, single report PDFs into a single PDF and have page numbering too?


Thanks!

View 11 Replies View Related

Reporting Services :: How To Create Report With Multiple Rows With One Parent And Multiple Child Groups

Aug 17, 2015

I am in the process of creating a Report, and in this, i need ONLY the row groups (Parents and Child).I have a Parent group field called "Dept", and its corresponding field is MacID.I cannot create a child group or Column group (because that's not what i want).I am then inserting rows below MacID, and then i toggle the other rows to MacID and MacID to Dept.

View 3 Replies View Related

Error 0x800C0008 With Multiple Subreports

Apr 17, 2007

Hi,

strange behaviour in our production environment, while in the test servers all goes ok:

web application with web report viewer, the report is fine but clicking on "preview" or "print" an error 0x800C008 occurs.

The report include 3 subreports, and here's the problem: after some attempts i realized that each subreport (alone in the master report) works fine, but more than 1 in the same master report produces the error!

Here is the log:




w3wp!library!7!04/17/2007-11:23:55:: i INFO: Call to RenderNext( '/WRReports/Orders' )
w3wp!processing!7!04/17/2007-11:23:55:: a ASSERT: Assertion failed! Call stack:
Microsoft.ReportingServices.ReportProcessing.Persistence.IntermediateFormatReader.Assert(Boolean condition)
Microsoft.ReportingServices.ReportProcessing.Persistence.IntermediateFormatReader.RegisterDefinitionObject(IDOwner idOwner)
Microsoft.ReportingServices.ReportProcessing.Persistence.IntermediateFormatReader.ReadReportItemBase(ReportItem reportItem)
...
Microsoft.ReportingServices.Library.AsyncExecution.AsyncStartMain(Object state)
Microsoft.ReportingServices.Diagnostics.CancelablePhaseBase.ExecuteWrapper()
Microsoft.ReportingServices.Diagnostics.ThreadWorkItem.SafeThreadPoolCallback(Object ctx)
System.Threading._ThreadPoolWaitCallback.WaitCallback_Context(Object state)
System.Threading.ExecutionContext.runTryCode(Object userData)
System.Runtime.CompilerServices.RuntimeHelpers.ExecuteCodeWithGuaranteedCleanup(TryCode code, CleanupCode backoutCode, Object userData)
System.Threading.ExecutionContext.RunInternal(ExecutionContext executionContext, ContextCallback callback, Object state)
System.Threading.ExecutionContext.Run(ExecutionContext executionContext, ContextCallback callback, Object state)
System.Threading._ThreadPoolWaitCallback.PerformWaitCallback(Object state)

w3wp!library!7!04/17/2007-11:23:55:: e ERROR: Throwing Microsoft.ReportingServices.Diagnostics.Utilities.InternalCatalogException: Errore interno nel server di report. Per ulteriori informazioni, vedere il log degli errori., un-named assertion fired for component processing;
Info: Microsoft.ReportingServices.Diagnostics.Utilities.InternalCatalogException: Errore interno nel server di report. Per ulteriori informazioni, vedere il log degli errori.


Any ideas??

Thanks in advance to anyone

View 1 Replies View Related

Display Subreports With In A Main Report

Apr 12, 2007

Hello All,



I have 4 subreports that I need to display in the main report. I can pull a sub-report with in the main report howevere the subreport doesn't display any data. It just gives me a blank template like:



Customer name Customer # Address 1 Address2 city



The subreport itself is not empty when I open it otherwise it shows me a list of all the customers however, no data when I call it as a part of main report.



Can anyone suggest me on this one?

Thanks,

Rashi

View 6 Replies View Related

Adding Subreports To Master Report At Runtime

Mar 12, 2007

Hi guys,

Is it possible at runtime to decide what subreports you want in your master report. Is this possible in RS?. Many Thanks in advance.

View 6 Replies View Related

Report With Subreports And Data-Driven Subscriptions?

Feb 7, 2008

I have problem with using a data-driven subscription on a report with subreports. It works fine when I remove the subreport and generates error even when I add a subreport which only consists of one textbox.

I just was curious to know if using data-driven subscription on a report with subreports is supposed to work?

Thanks,

View 3 Replies View Related

Exporting Report To Excel With Subreports Problem

Mar 8, 2007

Hello,

I got a error when exporting to excel one report that has a table and in a column it has a subreport.

Is this possible to do?

What is the work around?

The error that i got it is the following.


Server Error in '/Reports' Application.
--------------------------------------------------------------------------------

For more information about this error navigate to the report server on the local server machine, or enable remote errors
Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code.

Exception Details: System.Exception: For more information about this error navigate to the report server on the local server machine, or enable remote errors

Source Error:

An unhandled exception was generated during the execution of the current web request. Information regarding the origin and location of the exception can be identified using the exception stack trace below.

Stack Trace:

[Exception: For more information about this error navigate to the report server on the local server machine, or enable remote errors]

[Exception: An error occurred during rendering of the report.]
Microsoft.Reporting.WebForms.ServerReport.ServerUrlRequest(Boolean isAbortable, String url, Stream outputStream, String& mimeType, String& fileNameExtension) +489
Microsoft.Reporting.WebForms.ServerReport.InternalRender(Boolean isAbortable, String format, String deviceInfo, NameValueCollection urlAccessParameters, Stream reportStream, String& mimeType, String& fileNameExtension) +959
Microsoft.Reporting.WebForms.ServerReportControlSource.RenderReport(String format, String deviceInfo, NameValueCollection additionalParams, String& mimeType, String& fileExtension) +84
Microsoft.Reporting.WebForms.ExportOperation.PerformOperation(NameValueCollection urlQuery, HttpResponse response) +143
Microsoft.Reporting.WebForms.HttpHandler.ProcessRequest(HttpContext context) +75
System.Web.CallHandlerExecutionStep.System.Web.HttpApplication.IExecutionStep.Execute() +154
System.Web.HttpApplication.ExecuteStep(IExecutionStep step, Boolean& completedSynchronously) +64






--------------------------------------------------------------------------------

Version Information: Microsoft .NET Framework Version:2.0.50727.42; ASP.NET Version:2.0.50727.210



Thank you


View 2 Replies View Related

Blank Pages In Report With Matrix And Subreports.

Mar 4, 2008

Hi,

I have a master report that contains 4 sub reports. The first two subreports contains matrix controls that can (and will) spill over to a second page. With 5 columns of data the matrix subreports fit nicely onto one page, 6 or more columns and they will spill into a second page. The second two subreports will always fit onto one single page. All four subreports are inside a list control which will repeat for each structure. e.g. Each subreport will be rendered once per structure.

The master report renders perfectly (with no blank pages) whenever the two subreports with the matrix controls fit on one page each. However, whenever the matrix control subreports spill into a second page it causes the master report to insert a blank page after subreport 3 and 4, bare in mind subreport 3 and 4 both fit perfectly on a single page. I've check all margins and page widths etc.

The blank page problem only occurs whenever the matrix needs to span two pages.

Anybody encountered this problem or have any ideas how to fix it? I'm beginning to think it is a bug with reporting services.

Regards,
Adrian.

View 3 Replies View Related

Problem Deploying Subreports With Main Report

Feb 26, 2007

Hi All,

Here's my problem. I have an SSRS report with subreports on it. The main report and subreports work fine on my machine when I run the main report. However, when I deploy them to our test server and change the server name of the shared datasource, only the main report brings back data. The subreports show an error of something like "Error in displaying the subreport" for each subreport. The subreports require parameters that I believe I am supplying from the main report. What am I doing wrong? Is it really necessary to deploy the subreports with the main report to the new server. With Crystal Reports, I didn't have to do this. Any thoughts or suggestions would be appreciated.

View 3 Replies View Related

Adding Landscape And Portrait Subreports Into A Single Report

Sep 27, 2006

The goal is to produce a single PDF consisting of a number of subreports. Some are landscape, others are portrait. The subreports may also be run as independent reports. The master report defaults to the width of the widest subreport, which is landscape. This causes all portrait subreports to spill over. Your suggestions / comments are appreciated.

Thanks!

View 1 Replies View Related

Reporting Services :: Enumerating Reports With Subreports?

Jul 27, 2015

Is there a good way in TSQL to:

1. List all SSRS reports containing sub-reports
2. List the SSRS sub reports?

View 2 Replies View Related

Using Multiple Stored Procedures In One Report (SQL Server Reporting Services)

Aug 11, 2005

Hi all,

I want to use 2 stored procedures in one report, but I could not find what is the way of doing this. I searched this subject on the intrernet, and I found some solutions. However, they used stored procedures in one stored procedure and used in one report. This is not the thing which I want to do, I want only do using 2 stored procedures in one report at the same time.

Thanks, for now...

View 1 Replies View Related

Reporting Services :: Multiple IIF Statements To Set Row Visibility In SSRS Report

May 19, 2015

I Have an SSRS report which shows questions and answers pulled from a view tables.I have 3 rows: Row 1 shows questions and answers 1 - 128, row 2 shows questions and answers 128 to 248 and row 3 shows 248 onwards.I only want the row with the correct questions and answers to show.So am using this query for example:

=IIf((Fields!vQuestions_Question_ID.Value < 128 Or Fields!vQuestions_Question_ID.Value > 247)
AND
(Fields!vQuestions_Response_value.Value < 128 Or Fields!vQuestions_Response_value.Value > 247), False, True)

which fails.If I only use= IIf(Fields!vQuestions_Question_ID.Value < 128 Or Fields!vQuestions_Question_ID.Value > 247, False, True) this works.What is the correct syntax for the multiple IIfs as i want both the criteria in the first query satisfied?

View 2 Replies View Related

Reporting Services :: Select Between From And To Dates In Multiple Parameter Report

Oct 26, 2015

I have a report that uses several filters including a from and to date filter, I have  a field named TimeLastMod which is a Timestamp. I am extracting the From and To dates from this field using Select format(TimeLastMod,'MMM') as FromMonth,format(TimeLastMod,'MMM') as ToMonth From Eventlogs syntax.

These I pass on to a parameter and eventually to a tablix filter in an between opeartion. When I run the report, the records returned by the report is not what is expected as it sometimes returns an extra months data e.g., using between Aug and Sept will return october data as well.

View 5 Replies View Related

Reporting Services :: Pass Multiple Values From Field To Sub Report

Dec 3, 2015

I would like to know how does subreport accept multi value, and how should i modify my expression so that the sub report will display correctly.

My main report will pass dynamic number of account number to sub report, it depends on how many account number a person has. I have my sub report parameter Data Type set as "Allow multiple values" and the visibility is "Visible".

Currently, I am using the following expression to try to pass multi value from main report to sub report. I had tested the result of that expression. It is showing the following result when there are 3 account numbers to pass to sub report.

1534896
1563498
1593548

With that expression, when only one account no is pass from main report to sub report, the sub report will display the result. But when more than one account numbers are passing over, the sub report display nothing, it is blank.

--expression
=Join(LookupSet(Fields!PersonNo.Value,Fields!PersonNo.Value,Fields!AccountNo.Value,
"accounts"),""
+ VBCRLF)

*Note: I cannot put the account number into a multivalue parameter in the main report and pass from that parameter to sub report. I know this will workd BUT I had tried that by setting the default value in the multivalue parameter to the dataset that consists of the account number. That involves 100 thousand plus plus account numbers and it will for sure over the limit of 8000 characters.

View 2 Replies View Related

Reporting Services :: Export SSRS Report With Multiple Tables To CSV

May 11, 2015

I have a report with 2 tablixes, both the tablixes can be hidden based on the parameter selection. The 1st tablix has a drill through action on one of the columns, that calls the 2nd tablix in the SAME report. Once you click on the drill through, the 1st tablix is no longer visible, only the 2nd one is.

The report is working fine, until you export it to CSV file. Once you are on the 2nd tablix (1st one is NOT visible at this time in the report), and then when you export it to CSV, BOTH, the 1st tablix as well as 2nd tablix are visible in the CSV file. Why does the 1st tablix come up in CSV IF you just exported 2nd tablix to CSV?

Is there a workaround to NOT show the parent/1st tablix at all if the 2nd tablix is exported? Excel works fine!I know sub-reports instead of multiple tablixes might solve this issue.

View 4 Replies View Related

Reporting Services :: Multiple Chart On A Report Page And Parameter Filter

Jun 1, 2015

Is it possible to have different chart (having their dataset from same shared datasets) like six on one report, then secondly can they all respond to same parameter filter.

View 3 Replies View Related

Reporting Services :: Report Builder - How To Use Multiple-value Parameter In Dataset Control

Oct 25, 2015

I have used my parameter value in where clause of my dataset control SQL query. When I choose a single value in my multiple-value parameter then I get output as expected. Hovewer when I choose multuple values I get an arror:

Only one expression can be specified in the select list when the subquery is not introduced with EXISTS.
----------------------------
Query execution failed for dataset 'DATABASE'. (rsErrorExecutingCommand)
----------------------------
An error has occurred during report processing. (rsProcessingAborted)

I am convinced that it's a syntax problem. Is there a way I can change syntax of data output from query:

select @parameter

I need output to be like: value, value, value ... etc.

The dataset control query looks something like the following:

select
ID,
a,
b,
c,
d
from DATASET.dbo.Table
where ID in (select @parameter)

I have been searching through google for weeks to solve this and got this far and got stuck. Is it possible at all to achieve what I am looking for?

View 4 Replies View Related

Reporting Services :: Report Builder 3 Using Data Sources From Multiple Servers?

Sep 5, 2013

I have a report designed in RB3 that uses a data source from a SQL database that is on the report server. I want to add data to the report from an access database an a network drive.

I can add the second data source and create a data set to add data to the report. The dataset query returns data from the Access database but when I run the report I get the following error.

An error has occurred during report processing. (rsProcessingAborted)

Cannot create a connection to data source 'Feasibility'. (rsError OpeningConnection)

Also when I test the connection to the Access data base I get error ERROR (IM002) (Microsoft)(ODBC Driver Manger) Data source name not found and no default driver specified.

I noticed that Report Builder is connecting to the report server. If I disconnect from the report server I can a can connect to the Access data base but not the SQL database.

How can I get the report to run against both data sources?

View 2 Replies View Related

Reporting Services :: How To Filter MDX Query Using SSRS Report Parameter With Multiple Values

Oct 14, 2009

I am creating a SSRS report using a SSAS cube as it data source.  The user would like to select multiple values from a reporting parameter that is then used as a filter on the MDX statement.  I am bale to have the report work successfully when only one value is selected but not when multiple values are selected; the report uses only the first value from the reporting parameter when it contains multiple values.  How do I filter an MDX query using a SSRS report parameter with multiple values?

View 3 Replies View Related

Reporting Services :: Split Report Into Multiple PDFs During Windows Fileshare Delivery

Jun 3, 2015

I have a report that groups a particular dataset by customer, with a page break between each customer. If print this report, it looks great - one page per customer.

What I would like to do is have the report deployed on schedule to a windows file share, one .pdf file per customer. How to parse the output into individual .pdfs (one per customer) instead of a single .pdf containing all customers? I get it if this is not possible.

My current (painful) workaround would be to replicate the report for each potential customer, and set a schedule for each report to deploy sequentially. (Customer 1 at 9:00, Customer 2 at 9:01, etc).

Currently on SQL Server/Visual Studio 2008.

View 2 Replies View Related

Reporting Services :: Count Of Lookup Expression Column In Report With Multiple Datasets?

Sep 27, 2015

My report has two data sets that hold inventory from two different departments.    

ds_DeptA and ds_DeptB

I have a table, that pulls the DeptB status of DeptA record and displays it. This returns empty when the lookup fails to make a match, which is fine.  Typically means DeptB does not have the record yet.   I need to count these empty (null) feilds and populate it in a Text box outside of the table.
 
I just can't figure out the syntax with multiple datasets. I can't use the lookup expression as part of the count expression since the count expression is not contained in a table that has a dataset. 

table: ds_DeptA
fields:
ID
Name 
date_set_to_DeptB
<<Expr>> =Lookup(Fields!ID.Value,Fields!DeptA_ID.Value,Fields!DeptB_Status.Value, "ds_DeptB")

View 3 Replies View Related

Reporting Services :: RSS Script To Deploy A Single (or Many) Reports To Multiple Sharepoint Report Servers

Sep 8, 2015

So I get the basics, have a script that can deploy a single report to a single server. I have other simple scripts that work as well. Now I want a script that can deploy a single report to multiple Sharepoint servers. I have about 30. I know we are probably doing this wrong, as in, we shouldn't be deploying the same report to 30 sites, as they are all all technically all on the same server however they are all independent site collections so as far as I know there is no way to deploy them to a central location and then link to them from each site.

So I tried to copy elements of my single report deploy script and duplicate the Sub Main() to Sub Main1() and Sub Main2() with multiple "ParentPath1" dims, yes I know I'm stupid. That obviously didn't work. So looking at some other scripts including my own subscription updater and I'm sure I need to do some kind of "For Each item in X" but where to start. The other lists I've seen all come from rs.Something. My list is just 30 variables in the script, how can I say for each site in this list, Publish this report?

Here's the simple script that works fine. I just don't know how to modify it to make it deploy this to multiple sites. After I figure that out, I was going to accept the challenge of deploying multiple reports to multiple sites in a single script...

Dim warnings As Warning() = Nothing
Dim parentFolder As String = "Reports"
Dim filePath As String = "filepath"
Dim reportName As String = "Report file name"
Dim parentPath As String = "Sharepoint site URL"
Public Sub Main()

[Code] ....

View 2 Replies View Related

Reporting Services :: Add Sub-report To Main Report Using Report Builder?

Sep 9, 2015

I just created a report builder. I have a main report and i wanted to create a sub report. why i cant or i cant view the path or the folder of my  .rdl file to be use as my sub report.

View 5 Replies View Related

Transact SQL :: Create Email Report Which Gives Result Of Multiple Results From Multiple Databases In Table Format

Jul 24, 2015

I'm trying to create an email report which gives a result of multiple results from multiple databases in a table format bt I'm trying to find out if there is a simple format I can use.Here is what I've done so far but I'm having troble getting into html and also with the database column:

EXEC msdb.dbo.sp_send_dbmail
@subject
= 'Job Summary', 
@profile_name  =
'SQL SMTP',
   
[code]....

View 3 Replies View Related

Integration Services :: Insert Multiple Columns As Multiple Records In Table Using SSIS?

Aug 10, 2015

Here is my requirement, How to handle using SSIS.

My flatfile will have multiple columns like :

ID  key1  key2  key3  key 4

I have SP which accept 3 parameters ID, Key, Date

NOTE: Key is the coulm name from the Excel. So my sp call look like

sp_insert ID, Key1, date
sp_insert ID, Key2,date
sp_insert ID, Key3,date

View 7 Replies View Related

Integration Services :: Import Multiple Files Into Multiple Tables Using SSIS

Jun 16, 2015

I have a requirement where in i have around 15 different flat files , filenames are fixed but folder path can be changed(i think i should use a variable for folder path). These 15 files data should go to their respective tables in the database.

Whether I need to create separate data flow task for each file or separate package? In addition to these, example : while importing product data into product table, if product ID already exists, we need to ignore it and upload only the new records.

View 4 Replies View Related

Integration Services :: Import Data From Multiple Excel Sheets To Multiple Tables Using SSIS?

Aug 25, 2015

I have an excel file that has multiple sheets and I need to import data from each separate sheet to a separate table using SSIS. 

E.g. Sheet A data should go to Table A and Sheet B data should go to Table B and so on. Is it possible to do this with out using script task.

View 6 Replies View Related

Consuming Multiple Messages In Parallel From Multiple Windows Services

Feb 13, 2006

Hello All,

After hitting limitations in the SQL CLR world that bar us from invoking COM objects we are forced to use windows services to read the messages off the Service Broker Queues.
Unfortunately we loose the auto activation feature in the Queues, but we can still read messages and perform the SQL work under one transaction.

We are going to attempt to take N messages simultaneously from the Queue, though N instances of a windows service. If the messages send to the queue are one message per conversation, will we be able to achieve having N readers take messages off simultaneounsly?

Thank you very much,

Lubomir

P.S. if anyone has a better approach to obtaining the message in "out of sql code" or invoking external (not assemblies stores in SQL server) code libraries, that would be etremely nice to hear. I have thought about invoking a web service through CLR, but that is probably too much overhead - MSMQ seems much more appealing than a web service;

View 5 Replies View Related

How To Display Multiple Values On Report Page From A Multi-value Report Param

Nov 5, 2007

How do I display multiple parameter values on report page from a multi-value report parameter. For example, I have a report parameter where users can select multiple attendance codes and I want them displayed at the top of the report after it's run.

Currently, only the first value is showing on the report.

Thanks.

View 1 Replies View Related

Multiple 1:N Tables In Single Report Builder Report

May 31, 2007

The version of Report Builder I have will only let me choose from a very limited range of layouts. For example, the tabular layout displays a single table on a page.



Is there a way to produce a report containing two tables and other fields?



For example, I would like to create a very simple customer report with customer name and address at the top, then a table containing all contacts I have for the the customer (a 1:N sub-table of customer) and then a second table containing all the orders from the customer (a 1:N sub-table of customer).



Is this possible in the current version of Report Builder or is it planned in a future relase?



P.S. I know this is easy in VS Report Designer but I specifically want to do this in Report Builder. The Report Designer client is simply too complex for my non-technical user base. Report Builder would be ideal.

View 3 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved