I restored a wrong copy of a db, since then I that restored the correct
version. during the execution of the reports in report services I get an
error that read *** 'reportServerTempdb.dbo.persitedstream' ** this message
is sparatic, at time the reports are displayed other time I get that error,
the db backup was done an 2005, after I restored the latest version of the db
I reapplied RP services sp2 and I still get the error. Please if this is a
setting that I am missing or what I screwed up.
I originally posted this in November last year and thought we had it sorted but it appears still to give an incorrect result. I have been working on other work and have not really had the time to look into properly. So now here I am again I will not use my original post as I think I also didn't explain properly what the issue was so I will try again.
Web application
1 field = application 1 field = type
each ticket must have 1 application and 1 type BUT may have 2 application or 3 application (linked to that one field) BUT may have 2 type or 3 type (linked to that one field)
so could show like this:
application.....office issues application2.......empty application3 .....empty type .....general type2...empty type3........empty
I would like to know how I can indicate a NULL value in a report expression in SSRS / Report Designer.
I am trying to code :
IIF(Value_A = 0, <NULL>, Value_A)
It may look weird but I am trying to return NULL values when Value_A is 0 (zero), in the sample scenario above.
I have tried using the keyword "NULL", but it is highlighted as a syntax error, and suggested to use System.DBNull. I tried it and then it says that components of the System collection cannot be used in an expression, so I am left drawing blanks.
I am having trouble getting the following query to execute in the report builder:
OPEN Symmetric KEY DemoKey Decryption BY Certificate DemoCertificate; SELECT
PIN, EffDate, Cast(DecryptByKey(Address1) AS varchar(200)) AS Address1, Cast(DecryptByKey(Address2) AS varchar(200)) AS Address2, Cast(DecryptByKey(Address3) AS varchar(200)) AS Address3, Cast(DecryptByKey(City) AS varchar(125)) AS City, Cast(DecryptByKey(State) AS varchar(125)) AS State, Cast(DecryptByKey(ZipCode) AS varchar(90)) AS ZipCode, Cast(DecryptByKey(Country) AS varchar(125)) AS Country FROM Address CLOSE Symmetric KEY DemoKey;
I am getting the following error when I try to generate a report in the report builder:
Semantic query execution failed. Incorrect syntax near the keyword 'Open'. Incorrect syntax near ')'. ---------------------------- Query execution failed for data set 'dataSet'. ---------------------------- An error has occurred during report processing.
I was getting a similar error when I tried to enter the query using the Named Query window of the dsv file. However, I was able to overcome this obstacle by entering the query directly into the code of the dsv file and it works perfectly. That is, when I click on "Explore Data" in the dsv design view the data is retrieved from the database and is decrypted properly.
It appears that the report builder's semantic query engine does not accept transact-sql statements that involve data decryption. Does anybody know if this is true? Or is there some workaround for this situation? Any help would be greatly appreciated.
I get the following error when running a report in report builder using the Adventureworks sample model: Semantic query execution failed. Incorrect syntax near 'NULLAND'.----------------------------Query execution failed for data set 'dataSet'.----------------------------An error has occurred during report processing.
Here is how to replicate the error:
Create a table report using the Adventure Works model. Select Product entity, add Product Category and #Products to the table. Edit formula for #Products to "COUNT(Products)" and add a filter on Products for "Discontinued Date is empty". (I want a count of products that have not been discontinued). If you run the report now, it willl work as expected. Add a report filter for "Product.Color is empty" (I only want to see products that don't have a color) Run the report to get the above error. While the above is a contrived example, I am getting the same error on a data model that I am developing for a customer.
Am I missing something, or is this a bug in Report Builder?
I keep receiving the following error whenever I try and call this function to update my database.
The code was working before, all I added was an extra field to update.
Exception Details: System.Data.SqlClient.SqlException: Incorrect syntax near the keyword 'WHERE'
Public Sub MasterList_Update(sender As Object, e As DataListCommandEventArgs)
Dim strProjectName, txtProjectDescription, intProjectID, strProjectState as String Dim intEstDuration, dtmCreationDate, strCreatedBy, strProjectLead, dtmEstCompletionDate as String
Dim myConnection As New SqlConnection(System.Configuration.ConfigurationSettings.AppSettings("connectionstring")) Dim cmdSQL As New SqlCommand(strSQL, myConnection)
Forgive the noob question, but i'm still learning SQL everyday and was wondering which of the following is faster? I'm just gonna post parts of the SELECT statement that i've made changes to:
INNER JOIN Facilities f ON e.Facility = f.FacilityID AND f.Name = @FacilityName
OR
WHERE f.Name = @FacilityName
My question is whether or not the query runs faster if i put the condition within the JOIN line as opposed to putting in the WHERE line? Both ways seems to return the same results but the time difference between methods is staggering? Putting the condition within the JOIN line makes the query run about 3 times faster?
Again, forgive my lack of understanding, but could someone agree or disagree and give me the cliff-notes version of why or why not?
) ) ) ) ) AS timeType, Sum([2007_hours].Hours) AS SumOfHours from................
how can you convert it to sql syntax
I need to have a nested If statment which I can't do in sql (in sql I have to have select and from Together for example ( I can't do this in sql): select ID, FName, LName if(SUBSTRING(FirstName, 1, 4)= 'Mike') Begin Replace(FirstNam,'Mike','MikeTest') if(SUBSTRING(LastName, 1, 4)= 'Kong') Begin Replace(LastNam,'Kong,'KongTest') if(SUBSTRING(Address, 1, 4)= '1245') Begin ......... End End
end
Case Statement might be the solution but i could not do it.
This is the error it gives me for my code and then it calls out line 102. Line 102 is my buildDD(sql, ddlPernames) When I comment out this line the error goes away, but what I don't get is this is the same way I build all of my dropdown boxes and they all work but this one. Could it not like something in my sql select statement. thanksPrivate Sub DDLUIC_SelectedIndexChanged(ByVal sender As Object, ByVal e As System.EventArgs) Handles DDLUIC.SelectedIndexChanged Dim taskforceID As Byte = ddlTaskForce.SelectedValueDim uic As String = DDLUIC.SelectedValue sql = "select sidstrNAME_IND from CMS.dbo.tblSIDPERS where sidstrSSN_SM in (Select Case u.strSSN from tblAssignedPersonnel as u " _ & "where u.bitPresent = 1 and u.intUICID in (select intUICID from tblUIC where intTaskForceID = " & taskforceID & " and strUIC = '" & uic & "'))"ddlPerNames.Items.Add(New ListItem("", "0")) buildDD(sql, ddlPerNames)
I just created a report builder. I have a main report and i wanted to create a sub report. why i cant or i cant view the path or the folder of my .rdl file to be use as my sub report.
After I use the report builder to create a generic report, how do I actually get that report into the report designer so that I can modify it more effectivly?
The issue that I have now is that the file on the report server is not a .rdl file and if I simply save it as one and then bring it into VS to modify it the code file is a html structure rater than a XML file type.
What I am trying to create a query to check, If recDT is not value or null, then will use value from SELECT top 1 recDtim FROM Serv. Otherwise, will use the value from recDT. I have tried the below query but it doesn't work. The error says, Incorrect syntax near the keyword 'SELECT'.Incorrect syntax near the keyword 'else'.1 SELECT 2 case when recDT='' then SELECT top 1 recDtim FROM Serv else recDT end 3 FROM abc 4 Anyone can help? Thanks a lot.
I want to use this as the data from which to build a report model. As linked servers don't show up in the Data Source View wizard, I created a view in SQL Server:
create view MyExcel as select * from XL_SPS_1...Sheet1$
Okay, great, now the view shows up in the DSV wizard and I can create the data source view. However, when I create a new report model based on this data source view, the Report Model Wizard tells me at "Create entities for all tables" that I've got an error when it processes dbo_MyExcel that "Table does not have a primary key."
I assume this is where the identifying attributes for the entities in the report model are taken from, so I really can't go further. Does anyone have an idea as to how to add a primary key to a linked server (Excel) in SQL 2005? Can this be done? Other than importing spreadsheet data to a SQL table, how can I get around this?
I have done the following and a domain user would not access report created a login to the SQL server to the user (this SQL Server is where data source DB is)went to site setting in Report Manager and made this use a system userright clicked on report folder and made this user in the browser roleeven checked that in the report in question, the user is already in the browser role Still the user would not access the report! "User .......... does not have required permission" is the error message I am getting.Â
I have created a report with the report server project template.
the report is created from stoked procedure having defaut input parameters.
With visual studio, i publish my report on reportserver. whenever i access to my report on this url :
http://localhost/ReportServer/Pages/ReportViewer.aspx?%2fReport+Project4%2fReport4&rs:Command=Render. the created report is with the default parameters.
I would like to know if i can transmet parameters for the stocked procedure to build the report with the request i want.
I tried to put parameter directly in the url in this way
I have written a report visual studio. Â The report has 10 multi-value parameters that pull data from their individual data sets within the reports. Â When running the report from within Visual Studio it renders fine. Â There are no errors reported, only a warning related to a pathname I have use to retrieve image data and display on the report.Deployment of the report is error free.When I view the report I briefly get the "Loading" splash window, but then nothing. Â None of the headers or static text is displayed. Â The results window is blank.
The report defaults all the parameter values. Â In trying to debug the issue I have found by reducing the number of parameter values the report will render. Â Once I have all the values added, the report does nothing.Below is the query being used for the report. Â The where clause in the query shows the parameters being used and the syntax.We are running on Windows Server 2008 R2 and SQL Server 2008 R2.
Ralph SELECT RTRIM(a.ITEMNMBR) AS Style, RTRIM(a.ITEMDESC) AS Description, a.ITMSHNAM AS UPC, c.LOCNCODE AS Store, d.LISTPRCE AS ListPrice, a.CURRCOST AS Cost, a.USCATVLS_1 AS [Main Category], a.USCATVLS_2 AS Market, a.USCATVLS_3 AS [Alternate Retail], a.USCATVLS_4 AS Country, b.ITEMXTRAS_1_Type AS Type, b.ITEMXTRAS_2_Finish AS Finish, b.ITEMXTRAS_3_SubCategory AS SubCategory, b.ITEMXTRAS_4_Department AS Department,
I have a fairly complex report that was given to me that was hard coded for single parameters. There is a dropdown for each market (created from a query in SSRS). The users have to run for each market each week.
Is there a way to use this report as a Sub-report inside a list of a master report and then use a mult-value parameter?
I want this multi-value parameter to build the values for the list and then run the "sub-report" for each value.
We are about to implement SSRS reports (SQL Server 2012), and have found one issue we don't like. The report looks great when we open it in pdf format. However, when we open it in Excel format, we want it to be the raw data, not look like the pdf report. I tried the simpl headers, and that removed the page header/footer. However, the report format was still in play.In other words, we would like the report when opened in Excel, to look just like it does when we open it as a CSV.I have tried to modify the config file a couple of times. Here is my latest attempt:
Extension Name="CSV" Type="Microsoft.ReportingServices.Rendering.DataRenderer.CsvReport,Microsoft.ReportingServices.DataRendering"> Â Â Â Â <OverrideNames> Â Â Â Â Â <Name Language="en-US">CSV (comma delimited)</Name> Â Â Â Â </OverrideNames> Â Â Â </Extension> Â Â Â <Extension Name="CSV" Type="Microsoft.ReportingServices.Rendering.DataRenderer.CsvReport,Microsoft.ReportingServices.DataRendering"> Â Â Â Â <OverrideNames> Â Â Â Â Â <Name Language="en-US">Excel (csv)</Name> Â Â Â Â </OverrideNames> Â Â Â </Extension>
Essentially I have set Visible = "false" for the Excel type, and tried to duplicate the CSV, changing the name to make it look to the user like it is "Excel". This fails. I checked the event viewer, and I see two entries.. The RSReportServer.config file has been modified. (Information)The value for UrlRoot in RSReportServer.config is not valid. The default value will be used instead.I literally took the file, opened it in Notepad, pasted in my changes, from another notepad window, and tried to run the report. I did not see EITHER of the two names I expected, using the OverrideNames tag. As I said earlier, I was able to affect the outcome, by setting SimpleHeaders to true (or however it is identified). That did work in that the page header and footer was removed.
I have a ssrs report having 2 tables in with 4 columns in each. When I go to export option in preview I can see all data coming in one excel sheet, But I am trying to get 2 tables in 2 different pages in Excel when I export.First page of excel comes with first table data with 4 columns and second page of excel comes with second table data with 4 columns .
I am working on reports in SSRS 2008 (not R2)... There are some reports with parameters that are hidden when the report is accessed through normal URL using ReportViewer.asx..The thing is that these hidden parameters need to be visible when the report is accessed using SSRS Report Manager.
We have an Office SharePoint 2007 site, we developed a couple of web parts and added them to our site. We used SQL Server Reporting services 2005 as our reporting solution. The reports are hosted on the report center and when we need a report, we open it by sending a URL requesting the report, passing the report parameters in the URL query string. So the report is filtered based on the parameters passed from the web parts.
But since best practices say that you should host reports directly under SharePoint, by configuring the reporting services to run in the SharePoint integrated mode. We followed the steps and installed SharePointRS and we finally succeeded to publish the reports to a SharePoint folder, but we had a limitation: we are unable to pass the report parameters internally to the report hosted in SharePoint. If we passed them in the query string as the report center case, SharePoint neglects them totally. So the question is: how can I pass parameters internally between a SharePoint web part and a SQL server 2005 reporting services report hosted in SharePoint?
We have a remote business client who has a proxy server setup and this translates into receiving a 407 proxy authentication blocking error when attempting to download the report builder application for deployment off the report server which is housed locally with us. The proxy server does not allow them to download application type files off another site. At the moment, they would not like to disable the proxy for these users to allow them to deploy the application on their client or add the report server as a trusted site. Is there a method by which Report Builder can be locally installed on the client pc instead of online only with it knowing the correct report server to access and then still launch correctly when the report builder button is pressed through report manager?
I am not a web application guru by any means and we have tried to replicate the oneclick deployment and what occurs in the local settings/apps/2.0 subdirectories, but the application still attempts to download/install again. If we attempt to just launch the local executable on the client, report builder assumes the client pc (localhost) is the report server to access. Is there a method which will succeed?
I am extracting RS reports through a WebService: report = execService.Render("EXCEL", null, out extension, out mimeType, out encoding, out warnings, out streamIds);
Some works fine but some are generating the following SoapException:
Error during processing of €˜ReportParameterTime€™ report parameter. ---> Error during processing of €˜ReportParameterTime€™ report parameter. ---> Error during processing of €˜ReportParameterTime€™ report parameter. I set required parameters to their default values. In this specific report I have two required parameters: 1: ReportParameterTime, String 2: ReportParameter1, String
I set them to their default values (ReportParameterTime to "[Czas].[Kalendarzowy].[Rok].&[2007]" - means Time Calendar Year 2007) but I am getting the exception above. I set parameters using this code:
Where parameterValues is a List<ReportExecution2005.ParameterValue>.
When I am using Microsoft.Reporting.WinForms.ReportViewer the report is generated without any problems. I can see one parameter to choose: "Kalendarzowy" (means adj. Calendar) and can select years, the default value is "2007".
What am I doing wrong and how can I fix this error ? Does anybody know ?
I'm wondering how to print a SSRS report without bringing up a report viewer. Is there way to print(PDF format) the SSRS report in the web application(Â .net ) Â directly from the "print" button without bringing up a report viewer?
I'm trying to deploy Reporting Services on an Internet-facing web server using a custom security extension (forms authentication). We will be putting Report Manager on the Web Server outside of the firewall, and Report Server on another machine inside the firewall. When testing the solution in a development environment with Report Manager and Report Server on the same box, the solution works fine.
When testing it using the Internet-facing environment described above, it almost works but there seems to be an issue with the authentication cookie that is generated. Here's what happens:
1. User enters credentials on UILogon.aspx and submits form. 2. In the code-behind, LogonUser() is called through a web service proxy and the authentication cookie is returned successfully. The code used here to set the cookie is the same code used in the Forms Authentication sample that ships with RS2005. 3. The user is redirected to Folder.aspx, and the request hangs for a while, and eventually kicks you back out to UILogon.aspx, as if it lost the authentication cookie. When doing a trace on the HTTP header, the cookie is still there.
Is there anything special I need to do to make the Report Server "see" the cookie when I have Report Manager and Report Server on different machines?
I have installed SQL Server Reporting Service on window xp. everything working fine except one thing.
I have installed sql server with my a/c. my a/c have admin rights. when i giving http://dineshpatel/reports it is displaying page but Report Builder and other option are not displaying. I hope i don't have admin rights.
I have checked with local administrator login also but same problem.
what additional setting are require for admin rights?
I created a custom assembly using C# to transform some binary data into text, and in this assembly I used one win32 dll developed by our customer to help me to do the tranformation. The code I used to call the win32 dll is like below: [DllImport("tdasuie.dll", EntryPoint = "AlrtLogConditionToText", ExactSpelling = false, CharSet = CharSet.Auto, SetLastError = true)] private static extern UInt32 AlrtLogConditionToText(Byte[] pbCondition, StringBuilder pszText, UInt32 dwSize);
I defined a C# method to call the above win32 method and return a string. Then in the report, I called this C# method to get the correct string.
In the report designer, the C# method in the custom assembly can return the correct string in the preview window. But after I deployed the report into the report server, the textbox will only display "#error" in the report manager web page.
I have a report builder drill down report. I have row groups with totals.   It looks like the attached.  The problem is when the report is not expanded the Grand Totals column is not accurate... it is displaying the totals of one of the rows when expanded.The expression in the Total Show text box is
= Switch (                                    MID(Fields!protocol_id.Value,1,7)="THERAPY",                                Sum(IIF(Fields!status.Value = "CO", CDbl(Fields!TX_CO.Value),      Nothing)),  MID(Fields!protocol_id.Value,1,7) = "GENERAL" and                          MID(Fields!program_id.Value,1,6) = "INTAKE",                             Sum(IIF(Fields!status.Value = "CO",
[code]...
Is there any way to not display the expression in the Total columns unless the report is expanded?
