Report Viewer Drilldown Oddity
May 22, 2007
I have two servers running the same report server project with the same webapplication front end.
Both instances of SQL are on SP2.
When I drilldown in the report viewer on server A, and click next page it returns to the parent report. (which obviously it should go to the next page of the current report) Sometimes this odd behavior happens and sometimes it doesn't.
However on server B, everything works fine.
Note: the installation on server A went a littly crazy. Am I missing a service pack that would have fixed this?
View 1 Replies
ADVERTISEMENT
May 9, 2007
When runing a report in Report Manager I can click on an item and SQL Server provides the logic to drill down into the underlying tables. I can find no button to go back. The only way I've found to go back is to click a different tab at the top of the screen (History or something) then click View again and you get the original report. In designer there's a back button. Is there not such a button when running a saved report????
Thanks.
View 1 Replies
View Related
Jun 14, 2007
Hello,
I have a drilldown matrix report similar to the one below...state - drilldowns to sales person which lists the sales for a particular product...in each state there are usually more than 10 names, however i would only like to see the TOP 10 name appear for the sale off that product
My SQL is as follows
SELECT Sales,Consultant, ProductNo, State, Sum(Value) As SumOfValue,
From tblSales
where productNo = 2000
ORDER BY SumOfValue Desc;
If I put in the select TOP 10 it returns only the top 10 for all the states however i need the top 10 off EACH state, is there a way to filter this..or better yet a sort button which will show the top 10 only.
Sales for product
NSW charlie brown 25
bob snow 20
william tell 10
....50 sales reps..etc
WA Charles manson 34
fiona apple 20
peter 1 ....more sales reps etc
View 2 Replies
View Related
Oct 22, 2007
Im having a silly question, but im not able to find a solution for this. Im having a simple tabular report in which i have 3 groups defined and a detailed row. It is a drill down report wherein we need click on each group to get the next group and so on. When i went thro the wizard i was able to get that, so i tried myself without the wizard by adding the table and groups manually. However i found for the details grouping i was not able to set the "Visibility can be toggled by another report Item" because it was disabled, but in the report which i generated thro. the wizard it was selected and the last group item was given in that. Im not able to find why the checkbox is disabled when i create the groups manually. Please Help.
View 6 Replies
View Related
Jun 2, 2015
I Want to Create Drill Down Report in SSRS . Here we Should Display Year Wise ,Month Wise, Day Wise For Particular party Salry . How To Do it?
View 2 Replies
View Related
Jul 2, 2007
Hi Anyone,
I have a drilldown report includes three groups. I add the last group for pagination. But the details in each page doesn't accord to I specified and the detail record number is different in different page.
Another issue is the interactive sort always sort in the first page scope. I set the data region or grouping to the table, and evaluate expression scrope to Detail scope.
Anyone has experience on that?
Thanks a lot
View 3 Replies
View Related
Jan 26, 2007
Can a person change the page title from "Report Viewer/Manager" to the actual report name?
View 3 Replies
View Related
Dec 26, 2007
Hello,
Very strange phenomenon with the "Jump to report:" Hyerlink Actions when I deployed my reports to the production servers:
The Actions no longer funcioned properly when attempting to go to one report to another. Sometimes, the same report would come up and sometimes a different report. It appeared that whatever mechanism Report Server uses to construct the proper URL when using "Jump to report:" is unreliable(or the URL is not being honored by the web-server).
All this is happening under the Report Viewer control. I have had to do a painful fix of manually constructing the entire absolute URL and including the reportviewer control in the url.
Any way to get back relative Jump to report: URL's?
Thanks JS
View 1 Replies
View Related
Apr 28, 2015
We are generating excel report using report viewer at run time but if excel report having more then 65000 record generating error Microsoft. Reporting Services.OnDemandReportRendering.ReportRenderingException: Excel Rendering Extension: Number of rows exceed.
View 2 Replies
View Related
Dec 6, 2007
Hi ,
I have a problem using Report Viewer With SQL Reporting Services 2005.
I had a really weird issue with a ReportViewer. It would show the little green Loading progress bar image €¦ but it wouldn€™t show any data, just a white background where the output should be. I knew the data was there because exporting to Excel or PDF showed the data just fine.
The problem is report toolbar is display but NO DATA is displayed and the report comes out as EMPTY .
Thanks in advance..
Can you please help me out in resolving this problem.
View 18 Replies
View Related
Dec 29, 2006
Hi,
I want to give filtering criteria in my SSRS report.
I have drop down list control having list of Email's of clients.
So, how can i pass the value of the particular Email id in my SSRS report using Report Viewer control?
How can i pass user input as parameter in my report using visula studio 2005?
Thanx,
Ruja
View 1 Replies
View Related
Apr 17, 2008
Hello,
I'm using Reporting Services to render a text (stored in sql as varchar(max)). The text is all plain text, with some lines having trailing spaces.
Source text file i've imported to SQL via SSIS:
CLIENT: 10055
STATEMENT 2007
DATE:1002993
THIS IS THE OTHER STATEMENT
COLUMN1 COLUMN2 COLUMN 3
TRY THIS
*Note the trailing spaces on the line before 'STATEMENT 2007'.
I've designed a report using the Report Project in VS2005 to retrieve this text via a stored procedure. When I test the report using the 'Preview' tab in the IDE, it looks good
CLIENT: 10055
STATEMENT 2007
DATE:1002993
THIS IS THE OTHER STATEMENT
COLUMN1 COLUMN2 COLUMN 3
TRY THIS
But when I deploy the report and run it using URL Access:
CLIENT: 10055
STATEMENT 2007
DATE:1002993
THIS IS THE OTHER STATEMENT
COLUMN1 COLUMN2 COLUMN 3
TRY THIS
On all lines with trailing spaces, they (the trailing spaces) have been removed. This is affecting my formatting of some reports and statements. We really want to use the report viewer as it has built in paging, print and export capabilities.
Why does it look okay in VS2005 but different in Report Viewer via URL Access and Report Manager?
Note: When I export as PDF, it looks okay.
The stored procedure I use to return the data is a CLR Hosted assembly as below:
Code Snippet
Partial Public Class StoredProcedures
<Microsoft.SqlServer.Server.SqlProcedure()> _
Public Shared Sub GetPagedDocument(ByVal inText As SqlString)
Dim dr As SqlDataReader
Dim row As New SqlDataRecord(New SqlMetaData("RowText", SqlDbType.Text))
Dim cmd As New SqlCommand("select cast(doc as varchar(max)) as 'DOCTEXT' from testdoc WHERE id='" + inText + "'")
Dim cn As New SqlConnection("context connection=true")
cn.Open()
cmd.Connection = cn
SqlContext.Pipe.SendResultsStart(row) 'initialise the resultset to be returned
dr = cmd.ExecuteReader
'If no records in result set, return.
If Not dr.HasRows Then
row.SetString(0, "There is no document to display or you do not have permission to view the document.")
SqlContext.Pipe.SendResultsRow(row)
SqlContext.Pipe.SendResultsEnd()
' SqlContext.Pipe.Send("There is no document to display.")
Return
End If
'Read rows in the result set
dr.Read()
'Get the entire text
Dim docText As String = dr.Item("DOCTEXT")
'debug
row.SetString(0, docText)
SqlContext.Pipe.SendResultsRow(row)
SqlContext.Pipe.SendResultsEnd()
Return
'end debug
End Sub
End Class
Any help will be appreciated.
View 3 Replies
View Related
Dec 14, 2012
i just clicked on Advanced mode in Column Group, and then in Row Group Side i set Fixed Data=true for first top static. I'm using local report not server report and i'm displaying that local report in Reportviewer. Now also its not working....
View 6 Replies
View Related
Mar 28, 2008
Hi,
I am having hard time in sending parameters to the report server through reportviewer control from my application. Could anybody help me on this issue?. Is there any way to send the parameters and also what kind of configuration do i need on my report project so that it can accept parameters from my application.
Thanks,
View 9 Replies
View Related
Jun 29, 2007
Do I need the report server running in order view a SSRS report in a report viewer control? I've created my report in .net and it works great when I'm viewing it in visual studio, but can I run it my web app without the report server.
View 1 Replies
View Related
Jan 22, 2007
I just installed a fresh lab machine with WSS 3.0 and SQL 2005 SP1. I registered the RS web parts.
In the home page I added the Reports Explorer and the Report viewer web parts. I set up the Reports Explorer and the list of reports are showed.
When I connect the Report Viewer Web part to get report from the Report Explorer web part I get the maintenance WSS page. I have to delete the Report Viewer web part to have the page working again.
If I use only the Reports Viewer with a report (not connected to Reports Explorer) is working just fine.
Any ideas what could be the problem? Any hints on how to investigate this is also much appreciated.
Thanks,
Joe
View 1 Replies
View Related
Mar 9, 2004
alright here is an sql statement i am using
SELECT t_Provider.ProviderID
FROM t_Location INNER JOIN
t_Provider ON t_Location.LocationID = t_Provider.LocationID INNER JOIN
t_Source ON t_Provider.ProviderID = t_Source.ProviderID
WHERE (t_Location.StateID = 25)
and currently i have 2 rows in my location table with the stateID of 25 and 2 of the providers have the same location id so it should bring up 3
should bring up this
|
V
providerid location id
112 147
151 147 -- I had the same results without this value entered
114 149
but it brings up three and did before i added the center record too
and their values are
112
114
112
why is it bringing up 2 of the same and why does it ignore when i add another record
View 2 Replies
View Related
Mar 19, 2008
Hi,
I added a page to exsisting web site. Then I used report viewer to show a report. But when I try to view it in the browser, I get the following error message.
Server Error in '/Website' Application.
The type CustomReportServerConnection, APP_CODE does not implement IReportServerConnection or could not be found Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code.
Exception Details: Microsoft.Reporting.WebForms.InvalidConfigFileTypeException: The type CustomReportServerConnection, APP_CODE does not implement IReportServerConnection or could not be found
Source Error:
Line 272: <asp:View ID="vwWARRatingChangeReport" runat="server">
Line 273: <aspanel ID="pnlWARRatingChangeReport" runat="server" Width="683px">
Line 274: <rsweb:ReportViewer ID="rvWARRatingChageReport" runat="server" Font-Names="Verdana" Font-Size="8pt"
Line 275: Height="100%" ProcessingMode="Remote" Width="100%">
Line 276: <ServerReport ReportPath="/CRMReportsQA/ORA/WARRatingsChange" ReportServerUrl="http://wiismab00035038:8095/Reportserver" />
Source File: c:Dev EnvironmentWebsiteApplicationsORAPDCRD.aspx Line: 274
Stack Trace:
But I created another website using visaul studio in my local machine and then used report viewer to disaply the same report. Its in server mode same as earlier. This one can be viewed without any trouble.
I'm not familiar with ASP.NET thing. Can anyone help me to resolve this one?
Thanks
View 10 Replies
View Related
Mar 6, 2007
Hi All
I have a reporting viewer in a windows form that behaves very strange. When I open the form and run the report it shows up nicely in the report viewer. If I print the report it only prints one page. When i print the report a second time the whole report is printed. Next I'll change the report parameters and run the report, then it shows up nicely in the viewer, but when I print the report the first report is printed.
Does anyone know what to do with this problem?
Thanks in advance
View 9 Replies
View Related
Apr 13, 2007
Hi All,
I have a Report Viewer and a Exit button in Web Form. Untill the report is processed i don't want to enable the button.
so Is it possible to know whether report is still executing in report viewer ?
I am using Remote Mode.
Any help will be appreciated.
Thanks
Akash
View 2 Replies
View Related
Feb 18, 2008
sorry but this is my first dayes to using sql report services i make 14 report in sql report services server and do't know how can i add this reports to my aspx page
and every report have parameters how can i send this parmeter to reports when he open or load in aspx page
like companyID and employeeID
my report have his datasource and dataset
sorry but i just start to using reports services
View 4 Replies
View Related
Aug 24, 2007
I am looking for capturing Report viewer events on the web form. Can anyone tell me how to fo this?
Thanks,
S Suresh
View 3 Replies
View Related
Apr 22, 2008
Hi all,
is it possible to use ReportViewer control in project Windows Application (WPF) in msvs2008,which uses .DOT NET 3.5? I need to run ReportViewer component under xaml but I don't know how / or is it possible?
thanks for every helpful reply
sample:
<Window x:Class="WindowsApplication2.Window1"
xmlns="http://schemas.microsoft.com/winfx/2006/xaml/presentation"
xmlns:x="http://schemas.microsoft.com/winfx/2006/xaml"
Title="WindowsApplication2" Height="329" Width="533"
>
<Grid>
</Grid>
</Window>
Thanks ,
ashok
View 3 Replies
View Related
May 4, 2007
Hello all,
I'm going to implement an inverted index data structure that relies, for performance consideration, on partinioned views.
I've created a set of tables with a column named "PartitionKey" that deserve to partition the view. Then I've created a view using the UNION ALL as prescribed. The partinion works.
Now I'm devising the right SELECT query to benefit from the partition but I'm getting strange query plan.
"word" is the partinioned view and "vocabulary" is a referenced table.
If I write something like this:
select * from
vocabulary v
inner join word w on v.wordid = w.wordid and v.partitionkey = w.partitionkey
where
word = 'foobar'
and w.partitionkey = 1 -- It works correctly even with the condition v.partitionkey = 1
The query plan, correctly, shows that the only table actual accessed is "word1", the one related to the partinionkey value 1. ==> OK
If I write something like this, that appears more intuitively:
select * from
vocabulary v
inner join word w on v.wordid = w.wordid and v.partitionkey = w.partitionkey
where
word = 'foobar'
I get a concatenation operation that involved all the "wordXX" tables. I deduce that the engine is not so "clever" to benefit from the join hint.
So, I rewrite the previous as the following, thinking to feed a better infotmation to the engine:
select * from
vocabulary v
inner join word w on v.wordid = w.wordid and v.partitionkey = w.partitionkey
where
word = 'foobar'
and w.partitionkey = (select partitionkey from vocabulary where word = 'foobar')
That resembles the first example but... it doesn't work: I still get a concatenation operation.
I'm very frustrated and than rewrite again the query in a T-SQL script such this:
declare @partitionkey as int
set @partitionkey = (select partitionkey from vocabulary where word = 'foobar')
select * from
vocabulary v
inner join word w on v.wordid = w.wordid and v.partitionkey = w.partitionkey
where
word = 'foobar'
and w.partitionkey = @partitionkey
And I still get a concatenation operation.
I can understand the behaviour of the second and third example (the query optimizer doesn't have an actual value for the partition key) but the fourth is unbeliavable. Even if I'm feeding a query with a fixed value it cannot benefit of it at all.
Where am I wrong? Is so "silly" the qwery optimizer? How can I force the expected behaviour?
I would say more that the "partitionkey" is generated randomly when a new word is initially inserted into the parent table "vocabulary" so I cannot compute it before to access the "word" table.
I've tested on SQL2005. If anyone is interested I can provide the queryplans generated for all the above examples.
View 7 Replies
View Related
Feb 15, 2008
Hi, I am getting the following error when I try to open up my web application now, after installing the report viewer add on and placing it onto one of my pages.
Parser Error Message: Could not load file or assembly 'Microsoft.ReportViewer.WebForms, Version=8.0.0.0, Culture=nutral, PublicKeyToken=b03f5f7f11d50a3a' or one of its dependencies. The system could not find the file specified.
Source Error:
Line 47: <add assembly="Microsoft.ReportViewer.WebForms, Version=8.0.0.0, Culture=neutral, PublicKeyToken=B03F5F7F11D50A3A" />
Source File: web.config
So far I have tried to fix this error by installing the reportviewer.exe on the server. I have also verified that the ReportViewer files are in the assembly folder on the server. I also found a site saying to run the reportviewer.exe from a specific location, here is the link
http://dotnetslackers.com/_NET/re-49414_Could_not_load_file_or_assembly_Microsoft_ReportViewer_WebForms.aspx
but when I try to browse to the folder it is talking about I found out that I don't even have a BootStrapper folder under Microsoft Visual Studio 8/SDK/v2.0
Does anyone have any ideas on how to fix this error?
View 1 Replies
View Related
Apr 26, 2007
I understand this may be Off Topic for this board, but has anyone figured out how to add a Favicon to the Report Viewer?
View 1 Replies
View Related
Oct 16, 2007
How can i show scroll bar in winform report viewer.?
I have set Auscroll = true..
But that didnt effect
View 1 Replies
View Related
Jan 13, 2008
Can anyone tell me what new functionality is introduced with the 2008 version of Report Viewer (download here). As usual, Microsoft have published the new version, but without any release notes - this is very frustrating.
Is it just for compatibility with SQL Server 2008, or does it actually fix bugs (of which there are many) or introduce new features?
I wish Microsoft would improve their introduction of updates, such that providing detailed release notes was standard practice.
Thanks,
Nick
View 3 Replies
View Related
Mar 10, 2008
Can anyone tell me whats the latest version of the Microsoft.ReportViewer.WebForms.dll for the ReportViewer redistributable sp?
How do we find the version of dll file which is already installed in my machine?
Thanks
View 1 Replies
View Related
Apr 14, 2006
I'm trying to use report viewer controls, but the controls do not appear in the toolbox. The file reportviewer.exe was not in the location specified in the help files, but I have downloaded it, and when I try to add it to the toolbox, I get the message 'ReportViewer.exe' is not a .Net module. Should there be a .dll somewhere? Is it not possible to use this control w/ VB Express / SQLExpress?
View 1 Replies
View Related
May 14, 2007
I am creating a .NET WinForm app and would like to include the files required for the ReportViewer component (SP1). Can someone tell me where I can find these files? Also, can I simply drop these files in the folder where the rest of my app is going to reside, or does an installation have to take place?
Thanks - Amos.
View 7 Replies
View Related
Jan 15, 2008
Hi,
I have a order form and i want to take it to the next level.. So i have a report in my reportserver is exceuted using a sproc. I am using an Report viewer to view the report in my web application.
So is it possible to have 2 - 3 check boxes that will populate thru the webapplication, in my report viewer and still use the report from the report server.. For eg.
The data in my report will looks like this
OrderNo PlanId PlanName ... ETc
chkbox 45 15 ABD
chkbox 46 75 BDA
any help will be appreciated.
Regards
Karen
View 4 Replies
View Related
