Hello all,
I'm new with SP v3 and the Reporting Services of SQL Server 2005.
I did a prototyp report and show it with "SQL Reporting Services
Report"-WebPart, but I can't find the WebParts Report Viewer and
Explorer in the WebPart Gallery.
Please, could somebody give me a clue where the problem could be, or
how I could isolate the problem area.
Cheers
Marc
I am using MOSS 2007 and Reporting Services 2005. Integration part worked. But my existing report (analysis service report) with cascading parameter doesn't work in sharepoint. Every time you select a parameter you have click "Apply" to see the the cascading parameter. Is this a bug with report viewer webpart, because this works on regular sql 2005 rs viewer.
SharePointHelp
Hi,
I just installed a fresh lab machine with WSS 3.0 and SQL 2005. I registered the RS web parts.
In the home page I added the Reports Explorer and the Report viewer web parts. I set up the Reports Explorer and the list of reports are showed.
When I connect the Report Viewer Web part to get report from the Report Explorer web part I get the maintenance WSS page. I have to delete the Report Viewer web part to have the page working again.
If I use only the Reports Viewer with a report (not connected to Reports Explorer) is working just fine.
Any ideas what could be the problem? Any hints on how to investigate this is also much appreciated.
Thanks,
Dan
I just installed a fresh lab machine with WSS 3.0 and SQL 2005 SP1. I registered the RS web parts.
In the home page I added the Reports Explorer and the Report viewer web parts. I set up the Reports Explorer and the list of reports are showed.
When I connect the Report Viewer Web part to get report from the Report Explorer web part I get the maintenance WSS page. I have to delete the Report Viewer web part to have the page working again.
If I use only the Reports Viewer with a report (not connected to Reports Explorer) is working just fine.
Any ideas what could be the problem? Any hints on how to investigate this is also much appreciated.
Thanks,
Joe
Not 100% sure if this is the right forum, but its the one i'm mostly used to ...
We run one one machine Sharepoint Services 3.0, we've added the webpart cab file. When we add the Report explorer that points to the second server running SSRS this works fine. When we add the Report Viewer that point to that same server running SSRS it works fine.
But, when we link to output of the Explorer to the Viewer, or vice versa, the page comes corrupt and we have to hide or delete one of the components.
Any ideas, i've been looking for some articles, found a hotfix but they all were on v 2.0 .....
Kind Regards
Hi All,
I am deploying my reports on to the report viewer on a Sharepoint site. I wanted to know how to handle exception in the reports here. I was looking for exception handling in SSRS, but most of them are given with respect to displaying reports in ASP.NET pages. Is there any way I can configure Report Viewer to display friendly error messages instead of the vague error messages displayed from SSRS.
Thanks,
S Suresh
Is it possible to connect to the Report Viewer web part in SharePoint? This is the SharePoint integrated guy. I am displaying a report. I'd like to have links in the report that cause a sub-report or even a custom web page to open in another web part on the same page.
Is this possible?
Thanks.
J
Has anyone been successful in configuring the Hyperlink Target property in the SSRS Sharepoint Web Part? I've tried every setting, including _blank, yet the behavior does not change.
Am I doing something incorrectly or is this not implemented correctly?
Hi,
I am using Microsoft.ReportViewer.WebForms ver 8.0 to display rdl reports in a web page. I'm using VS 2005 with service pack 1.
I set ReportServerCredentials using a custom class that implements IReportServerCredentials. It exposes NetworkCredentials using a valid admin user account. I am setting report parameters from code as:
ReportViewer1.ServerReport.SetParameters(parameters)
I find that when I run the page with reportserver credentials set, the parameters are not passed to the report and I get an error message, "Parameter, XXX is missing a value". I can see what parameters were sent by setting ShowParameterPrompts to True.
When I remove the credential settings,the parameter values do get set but the report throws the following error on execution:
Execution '2su5vg55juj253455rodai55' cannot be found
I have checked that my web project is using Kerberos authentication and not NTLM. Has anybody faced a problem like this? I would appreciate any help.
Thanks
Supriya
I have a win.forms application part of functionality of which is to show rdlc report. When I try to launch the application it says that ReportViewer assembly is missing, which was expected. When I downloaded and try to install viewer runtime from here: [URL] .....
I receive that Microsoft SQL Server System CLR Types are not installed and must be installed first. I downloaded appropriate installation from [URL] .... and it installed successfully. But when I try to run viewer runtime installation it still says that Microsoft SQL Server System CLR Types are not installed. What do I miss?
Hello,
I am passing the partameters to MS Report Viewer control to view the report. It is working fine with normal parameters like 'abc', 'Jon' etc.
But fails with parameters having special characters like 'abc+', 'Version 1.1 Part 1', 'R1.8 RC' throws error "
The parameter is missing a value"
Could anyone please help on this.
Thanks,
Chandroday
here is my error
System.Web.Services.Protocols.SoapException: System.Web.Services.Protocols.SoapException: Logon failed. ---> Microsoft.ReportingServices.Diagnostics.Utilities.LogonFailedException: Logon failed. at Microsoft.ReportingServices.WebServer.RSCustomAuthentication.LogonUser(String userName, String password, String authority) at Microsoft.ReportingServices.WebServer.ReportingService.LogonUser(String userName, String password, String authority) --- End of inner exception stack trace --- at .................
Please help me
Trying to learn how to use Sql Server CE, Tutorial says to open server explorer, add connection, new connection, select data source as .net sql ce (words to that effect). On my visual studio, it ain't there and I can't figure out how to get it there. I have uninstall all of the Sql Ce stuff and reinstalled it. So I'm missing some key link. What are the magic incantations to get to first base?
Ed Warren
Hi all,
I just realized recently that a database "XYZ" in the Object Explorer of my SQL Server Management Studio Express (SSMSE) is put in the Database Explorer of my VB 2005 Express for processing a Stored Procedure in executing the SELECT statements (not by using Input and/or Output Parameters) during the ADO.NET 2.0-VB 2005 Express programming, then the content of the database "XYZ" is not in the SSMSE. How can I return the database "XYZ" from the DataBase Explorer of VB 2005 Express back to the Object Explorer of SQL Server Management Studio Express (SSMSE) safely? Please help and advise.
Thanks in advance,
Scott Chang
Here is a situation in my company:
We have an Office SharePoint 2007 site, we developed a couple of web parts and added them to our site. We used SQL Server Reporting services 2005 as our reporting solution. The reports are hosted on the report center and when we need a report, we open it by sending a URL requesting the report, passing the report parameters in the URL query string. So the report is filtered based on the parameters passed from the web parts.
But since best practices say that you should host reports directly under SharePoint, by configuring the reporting services to run in the SharePoint integrated mode. We followed the steps and installed SharePointRS and we finally succeeded to publish the reports to a SharePoint folder, but we had a limitation: we are unable to pass the report parameters internally to the report hosted in SharePoint. If we passed them in the query string as the report center case, SharePoint neglects them totally.
So the question is: how can I pass parameters internally between a SharePoint web part and a SQL server 2005 reporting services report hosted in SharePoint?
Hello,
I'm using Report Viewer Control and everything works fine. But my problem is I have the same report shown two ways, handout/grid . Handout has less columns and grid has way more.
Now how can I accomplish this task ? I was thinking maybe have two subreports within the one main and hide/unhide accordingly based on user selection of handout or grid.
The problem is all my attempts are unsuccessful.
I will really appreciate if someone can help me on this.
Thanks a lot.
Harsimrat
Hi,
I want to give filtering criteria in my SSRS report.
I have drop down list control having list of Email's of clients.
So, how can i pass the value of the particular Email id in my SSRS report using Report Viewer control?
How can i pass user input as parameter in my report using visula studio 2005?
Thanx,
Ruja
Hi,
I am having hard time in sending parameters to the report server through reportviewer control from my application. Could anybody help me on this issue?. Is there any way to send the parameters and also what kind of configuration do i need on my report project so that it can accept parameters from my application.
Thanks,
Hi
View 8 Replies View RelatedI am doing drillthrough from ReportA to ReportB via the Date field on ReportA. In Report Manager, all is well. However, when run through a custom app using asp.net and the report viewer control, the behavior was erratic. sometimes it would work. sometimes it would merely bring up the ReportA again and i would have to click Date again and then it would work.
a coworker recommended the Report Viewer fix http://support.microsoft.com/kb/933137. Since the redistributable was not present in Add/Remove programs on my test box, i installed the full version. I then started up the .net app in debug and ran ReportA and drilled through to ReportB several times and could not make it fail. I was happy.
Since the redistributable was not present on the production box, i installed the full install there as well. However, the erratic report viewer behavior continued.
I decided to try runnign ReportB directly instead of via the drill through from ReportA. ReportB had always run perfectly on its own. When i try to use the graphical date selector control, the results are different depending on the machine I use.
1. If i am using my test box, and i run ReportB directly via the app in debug mode, i get a runtime error indicating Microsoft JScript runtime error: Object required. It then points to Reserved.ReportViewerWebControl.axd at the GetObjectPosition(obj) function.
2. If i am using my test box and go out to the live production website, i get the same runtime error.
3. If i am using another machine and go out to the live production website, the data selector control merely seems to refresh the report. This is the same behavior i get when using the production server and going out to the live website.
The redistributable has been uninstalled from both the test box and the production box. This did not change the behavior described above.
All of the Microsoft.ReportViewer items in C:Windowsassembly indicate version 8.0.0.0.
Any help would be grand. Also, please let me know if I should cross post this in the .Net forums.
Thank you.
Hello Everyone:
I'm in the process of verifying that all functionality in a version 6.5 database is still there in SQL 7.0. After the upgrade, one issue seems different.
When I attach to a SQL 6.5 database, the full username used in the connection is displayed in the Windows NT Event Viewer. But when I attach to the same database in SQL 7, the username shows up in the Event Viewer as 'N/A'. I've verified that audit permissions are set the same on both boxes both under SQL and in User Manager. Any ideas??
Hi,
I'm having problems navigating from one report to another one if the second report has a multi-valued report parameter. When I navigate to the second report, I don't pass any parameters, but I get an error "parameter is missing a value" for the multi-valued report parameter. I have it setup as allow "multi-value" and "blank value". Any idea what the issue might be?
Thanks.
Hi,
I am trying to integrate SQL SERVER 2005 ( Version 9.00.3033.00) with sharepoint server using the Add-in. In Add Application Management -- > Reporting Services Trusted Accounts, When i provide the credentials it is giving a message
Some or all identity references could not be translated.
I have installed the latest SQL SERVER 2005 from http://www.microsoft.com/downloads/details.aspx?FamilyID=4E50BE6E-3F92-4552-A78C-B3BE1D94D5DA&displaylang=en
Am i missing something ?
Thanks & Regards
Kiran Kumar
Hi all,
I have been using the reportviewer control to display my ssrs reports. However, i'm facing issues in displaying Server reports in the control. The following error show up whenevr i click on View Report.
Execution 'aaxe3ke5k34l5355qbup0rvo' cannot be found
Please help if anyone has come across something similar
Hi,
I'm have two issues I need to work out.
1) - I need to get the RDL (the RDL format merged with the data, like a rendered report in RDL format) - to pass back to the client Report Viewer. Is there a way to do that? I do not see that as an optional output types.
2) - I need to export to a specific file/path from the client side Reportviewer.. Is this possible? Is there a lower level API for this?
Thank you,
Hello,
I'm trying to set up SharePoint Integration for our report server. The setup we have is: 1. SQL server hosting the SharePoint databases and the Reporting Server, 2. SharePoint web front end hosting all SharePoint services. I've installed the reporting services SP2 on the SQL server and the reporting services add-in on the SharePoint server.
I configured the report server following the directions here: http://download.microsoft.com/download/f/d/c/fdcb3a53-0cb1-4e67-a1b6-45b89b3c59cf/readme_rsaddin.htm and here: http://www.sharepointblogs.com/helloitsliam/archive/2007/02/21/19801.aspx
Everything seems to be set up correctly, but when I open the Reporting Services Configuration Manager, the SharePoint Integration option shows the error, "The report server cannot access setting in the SharePoint configuration database. Most likely, the Windows SharePoint Services object model...."
I do have WSS 3.0 installed on the report server.
When I look in the logs on the report server it says the login failed for the account I have set as the Windows Service Identity however, when I look at the logs on the SharePoint server it shows that it is granting the account read and write access to each of the SPWebApplications I have set up.
Any suggestions?
Thanks,
Cynthia
Under sql 2000 I needed to register my sql server before I could begin working with it under Enterprise Manager. Under sql 2005 I usually setup the server under "Object explorer" and work with it from there. So what does registering a server under sql 20005 do? Why is it needed?
TIA,
barkingdog
Ive seen this asked all over but am yet to find a fix for my case.
I have 1 SharePoint 2007 server
1 SQL 2005 SP2 server with Reporting services running
Reporting services is configured and running all with ticks in SharePoint integration mode, the reporting services section shows up in Central Admin ok.
When I try to access reporting services I get the error :
http://reports.domain/reportserver
Report Server has encountered a SharePoint error. (rsSharePointError) Get Online Help
For more information about this error navigate to the report server on the local server machine, or enable remote errors Looking thru the logs I get the error :
w3wp!library!d!04/04/2008-13:54:20:: Call to GetItemTypeAction(/).
w3wp!library!d!04/04/2008-13:54:20:: Call to ListParentsAction(/).
w3wp!library!d!04/04/2008-13:54:20:: Call to ListChildrenAction(/, False).
w3wp!library!d!04/04/2008-13:54:20:: e ERROR: Throwing Microsoft.ReportingServices.Diagnostics.Utilities.SharePointException: Report Server has encountered a SharePoint error., ;
Info: Microsoft.ReportingServices.Diagnostics.Utilities.SharePointException: Report Server has encountered a SharePoint error. ---> System.NullReferenceException: Object reference not set to an instance of an object.
at Microsoft.ReportingServices.SharePoint.Server.SharePointDBInterface.internalFindObjectsNonRecursive(String wssUrl, CatalogItemList& children)
at Microsoft.ReportingServices.SharePoint.Server.SharePointDBInterface.FindObjectsNonRecursive(String wssUrl, CatalogItemList& childList, Security secMgr, IPathTranslator pathTranslator, Boolean appendMyReports)
--- End of inner exception stack trace ---
I setup a new website called RS Web Site in IIS on the SQL box, I then set this in the Configure Report Server. I have made sure Annonymous access is off.
Does anyone know how on earth I can resolve this ..
Many Thanks
Marcus
Hi -
I have SRS configured in SharePoint Integration mode. I have exposed a site collection under two MOSS-enabled websites - the first site has Forms Authentication enabled and the second site has Windows Integrated security enabled.
I have noticed that when I access the website with Forms Authentication I an unable to select "New (Report Model/Report Builder/Report DataSource)" options on my SRS integrated document library. When I access the site using WIndows Integrated security the menu options appear fine. Is there some sort of security trimming happening here that I am not aware of?
Thanks
-SE
I installed VS 2005 without SQLExpress. Thereafter, I installed SQL 2005 (not express). Now, when trying to connect to a database server in server explorer, VS can't find any SQL servers and the dropdown box is empty in the Add Connection Wizard.
Also, I would like my WebApplication to run its membership services on the installed SQL - not the implicitly present SQLExpress (which is not present on my machine). How do I tell WebSite Administration Tool to use SQL not SQLExpress!!!!
I have a rather complicated report with lots and lots of textbox and line controls. When I preview the report on the Report Server the layout is all kinds of skewed and all kinds of stuff is out of place. But when I export the report to PDF or TIFF, the output reverts to it's proper form. Why is it doing this? Is there anything that I can do to not make it so ugly when previewing?
View 2 Replies View RelatedHi all.I use Visual Studio .NET 2002 and SQL Server 2005 Express Edition as database.I try to connect to database using server explorer.Test connection is OK. When I done with it and click OK, the message prompt that "Unable to connect to database".So, is it impossible to connect SQL Server 2005 Express Edition using the server explorer?But, the connection is ok when I connect through code cause I can retrieve and update database.
View 2 Replies View RelatedHello,i have created some (test) Web Services in a Sql Server 2005 via theCreate Endpoint Statement. Now i look for a node in the "ManagmentStudio" where i can see these Web Services. But i dont found that. Whatis the plainest way to do that? What alternatives are existent?Thank you,Hans
View 2 Replies View Related