Report Viewer In ASP.NET - Subreport Page 2 Goes Back To Main Report Page 2 On Paging
Nov 22, 2007
What we've found is that when you have two reports where one navigates to the other, if you click on the second page of the second report, it takes you to the second page of the original report. If you navigate over to the subreport again and click for the second page, it works appropriately. This is definitely a no-go for production code and this may delay our ship date because I would think this is definitely undesirable.
Conditions:
ASP.NET Report Viewer using Remote Reports
Report that links to another report
Both reports return more than one page
Reporting Services installed
Steps to Reproduce:
Download the source code here.
Follow the directions (near the bottom of the post) to get the project set up.
Run it and click on a link in the first report to go to the second report.
Click the arrow for page 2 of the second report.
Notice how it takes you back to page 2 of the first report (this doesn't happen when you are in preview mode in the Reporting Services project and I don't believe it does this in a smart client application).
Click on a link in the first report to go back to the second report.
Click the arrow for page 2.
Notice how it takes you to page 2 of the second report.
Here is a link with source code and a more detailed explanation: http://geekswithblogs.net/robz/archive/2007/11/21/Reporting-Services-2005-BUG-Report-Linking-and-Paging---ASP.NET.aspx
So what I am looking for is both a workaround for now and if this is determined to be a bug, to be fixed in the next service pack.
I am having a main report having two subreports, say M1,S1 and S2 respectively.
The issue is S2 normally tend to go beyond one page, for all pages except first page of the of the subreport I am getting the page header and footer blank,
Actually this is not loading the ReportItems that are used in main report but it shows text boxes containing strings for eg . "My Name" and date functions eg Today()
I created a subreport1 with tablix.I created second subreport2 that has a tablix and one column chart and both are placed in a rectangle. No page break is applied to this rectangle. When I run the sub report, both tablix and Column chart are displayed on one page .
I created a main report and added Subreport 1 and Subreport 2 in 2 different rectangles. I set page break property of Rectangle(Subreport1) to End and no page break is applied to Rectangle of Subreport2.
When I run the main report, subreport1 is displayed in one page, subreport2 is displayed in 2 different pages.
sorry but this is my first dayes to using sql report services i make 14 report in sql report services server and do't know how can i add this reports to my aspx page and every report have parameters how can i send this parmeter to reports when he open or load in aspx page like companyID and employeeID my report have his datasource and dataset sorry but i just start to using reports services
I have created .RDLC file/report in MVC, but in Report Viewer when i try to display next page, i am unable to see the next page. it is just displaying the first page data and charts only.
Hi All, In my SSRS report. I have a report which has only one page. In preview it is showing as only 1 page but when I am printing the report. I am getting two printouts with the second page as a blank.. Please help me in printing the page that contains report. Intially I used a Page header, at that it used to print the blank page with a header only. Now as I removed the header it is printing the page without header i.e Blank Page.. So please help me in prinitng a single page that has the report. It is urgent,..
I'm hoping that someone can shed some light on this for me... I'm using SSRS SP2 and I have a basic report using a single list object which, at the moment, should print only two pages based on the results of the underlying query. When previewing the report, it shows the two pages. But when the report is printed or exported, there is a blank page before each report page.
What I've done so far: 1) Verified the properties of the list object and made sure that 'Insert a page break before this list' is not checked
2) Ensured that there are no hidden objects that could be causing this behavior 3) Ensured that the report size + margins are within the boudaries of an standard 8.5x11 paper size
Any suggestions on something that would solve this issue?
I was wondering if anyone knew how to take a value from a subreport and compare it to a value iwthin the main report. We are trying to see if the value in the subreport is greater than the value returned in the main report. We want to make the value test red if it is greater than. I know how to compare these values if they were in the same report, but when it comes to subreports I am lost. Any ideas? Thanks in advance.
I have 2 reports where 1 is a subreport and the other one is a main report. Can i change or refer to a control(item) in the main report depending on the value of an item in the subreport, when the subreport is being run?
Is there anyway that i can access subreport field in main report? I just want it to be displayed. Thats it. I can not put subreport field in main report bcz it is based on the parameter passed by main report.
Here's my problem. I have a subreport that shows data and labels if data is returned. However, if no data is returned, the subreport doesn't show at all. I have a message on the subreport I would like to show if no data is returned, but the subreport won't show at all. Any ideas??
SUBREPORT (License info to the right) SHOULD PRINT TO RIGHT OF ADDRESS INFORMATION ON LEFT. LIKE THIS...
Name ABC-12345 Address line 1 DEF-12345 Address line 2 GH1-12345 City, State Zipcode
The data is from one table and looks like this. Both the main report and subreport use a shared data souce.
Name Address line 1 City State Zipcode License ------------- ------------------- ------------- --------- ---------- --------- Joe Schmoe 123 Maple Street Clearwater Florida 33777 ABC-12345 Joe Schmoe 123 Maple Street Clearwater Florida 33777 DEF-12345 Joe Schmoe 123 Maple Street Clearwater Florida 33777 GHI-12345
All lines are header lines. Subreport has been placed in top header line. IT IS PRINTING SIMILAR TO THIS BUT SHOULD PRINT AS FIRST STATED ABOVE...
Name ABC-12345 DEF-12345 GH1-12345 Address line 1 Address line 2 City, State Zipcode
ISSUE: I would like the subreport to PRINT ALONG WITH the address information to its left. In Crystal Report a subreport could "Underlay Following Sections" - a wonderful feature Microsoft maybe should have copied. Is there a way to duplicate "underlay" behavior in SQL Reporting ? Thanks.
UPDATE: Coworker found workaround. Can concatenate Name, Adress line 1, Address line 2, City, State and Zipcode into one field. Would still like to know a more straightforward way.
This is the part that I need help. I need to use an original value from the main report and a "return" value from the subreport. Main Report (Footer) Sum(FinalPayment) + SubReport.Sum(PaymentAdances)
Is it possible to pass a return value back to the main report from a subreport?
I need to convert a Crystal report that contains three subreports. Each of these subreports uses a different stored procedure to obtain data. The main report uses data from these subreports to calculate averages in the footer etc.
How do i get the data contained in these subreports so i can use it in my main report?? Thanks in advance
Hi - I am pretty new to Reporting Services. I need to create a report where a single result row from the Select Statement populates an entire page of data. The regular grid or Matrix reports don't fit this need. Is there a simple way to do this?
I have a main report and a subreport. If the subreport doesn't have any data then I hide it, but the main report still shows the white space of where the subreport would show up if it had data. So how can I get rid of the extra white space in the main report?
I have a main report and 2 sub reports. I would like to pass the total Premium Paid from 2nd Sub report , and Total Bonus received from 3rd Sub report back to main report.
My scenario is actualy much more complicated than what i had attached below, which i cannot join the query for the 3 different reports together. But for demo purpose, i created the following sample scenario.
My main report is to display the sales summary by person by location.
A person may have more than 1 account number, and each account number is entitly for bonuses. As illustrated below.
Hello, If I have a report that includes a page header, the report viewer will render the report at the full width, but if I hide the page header and show only the body it will use the absolute width of the report.
I have a 7" wide report, with .75" borders set on each side.
Interactive & Print size are set to 8.5x11 Changing these sizes has no effect on the behavior of the viewer, which appears to ignore them.
When I view this report in the local viewer the contents fill the window if there is no page header. If I enable the page header then the report is drawn at 8.5" wide, leaving a _big_ white border on the right side. Any comments or workarounds that anyone knows? I know the local viewer is not a standard configuration (at least it seems) but it is what we need to use.Thanks,//Andrew
I have a report which is multiple pages in the report viewer. Now I want to make it shown in the webpage report viewer just in one page. Is there any ways to realize it?
I've been reading a lot of posts on this subject. I understand that the issue is due to the fact that the subreport is only rendered once. So after the main report is sorted on another column, the cell with the subreport produces an error.
What I want to know is whether or not this is considered a defect. And if it is a defect, is it fixed in another version?
I am currently running SSRS SQL2008R2 SP2 (20.50.4000.0)
I have embedded a subreport in the detail section of my report. When I view the subreport in page preview mode it renders with three columns, but when it is rendered w/in the main report in page preview mode the 3 column layout is rendered as a single verticle column.
I've defined the columns in the Body/Columns. I have also set the report inteactivesize and pagesize heights in an attempt to remedy the issue. Margins are set to 0.
I added a new windows user "ReportUser" which is a local user (not in administrator group). When I connect to the report manage's web page, I use reportuser to log in (when the anonymous access is disabled it will ask a log in). Report builder icon is not showing up on the report manager home page.
If I log in as a user in administrator group, the reportr builder icon shows up so I can download it and build report.
I have assigned reportuser "Content manager" and "repoter builder" access to the home folder. Is there anything else I have to do to make the report build icon show up on the home page?
I want to repeat line on each page of report on PDF while using 2 columns on report. The problem is that if i use table border it will also repeat after second table. i want a line between two tables.
How do I display multiple parameter values on report page from a multi-value report parameter. For example, I have a report parameter where users can select multiple attendance codes and I want them displayed at the top of the report after it's run.
Currently, only the first value is showing on the report.