Report And Page Headers
Nov 20, 2007All I can find is Page Headers. Is there a report header like there is in Access?
View 7 RepliesAll I can find is Page Headers. Is there a report header like there is in Access?
View 7 RepliesHi, this is probably a simple question but I just can't figure it out. I'm using SQL Server Reporting Services 2005 sp1.
I'm trying to design a report that displays a particular embedded image on the first page, and then a different one on every subsequent page. I.e full, fancy company logo on the first page, and a trimmed down version on every other. In Crystal, I would have simply used the Report Header and Page Header sections to achieve this - easy.
However, in SQL Reporting Services, there is only a Page Header section - therefore whatever I place in the Page Header shows on every page. Now, I know how to stop it displaying on the first page, but I don't know how to display the other image instead.
I read in a support forum that it is possible to do this by "placing report items above or below your data regions" but I can't get it to work.
Grateful for any assistance.
Matt
I have a report looking something like this:
Field 1 Field 3 Field 5
RandomInfo1 RandomInfo1 RandomInfo1
RandomInfo2 RandomInfo2 RandomInfo2
Field 2 Field 4 Field 6
RandomInfo1 RandomInfo1 RandomInfo1
RandomInfo2 RandomInfo2 RandomInfo2
It extends along a fair number of pages, and I'm currently using the "# of columns = 3" in the Report properties --> Layout section in order to make it span over 3 columns instead of the usual 1. I'm using a table in which the random info fields are the repeating values, and the Field 1,2,3,4,etc are included in the list control, but not part of the physical table itself.
My question stems from a couple of chunks of data which basically extend over the course of 1.5 pages (yep. There's enough to fill about 4.5 columns worth.)
I currently have
Field 1 RandomInfo50 RandomInfo100
RandomInfo1 RandomInfo51 RandomInfo101
Randominfo2 RandomInfo52 RandomInfo102
etc.... etc.... etc....
-----NewPage----
RandomInfo150 Field 2
Randominfo151 NewRandomInfo1
RandomInfo152 NewRandomInfo2
etc...
What I'm looking to do is have "Field 1" appear at the top of each column whenever a larger chunk of data forces itself into multiple columns, or even multiple columns on multiple pages. I have this nasty feeling it's something silly and blatantly obvious I'm missing...
Any thoughts?
Since you cannot use dataset fields in page headers is there any other way to dynamically load and image?
View 1 Replies View RelatedI achieved to get Fixed number of records per page ....but headers are not repeating in every page.... Is it possible to repeat headers on each page and fixed number of records per page please give me navigation.
View 3 Replies View RelatedHello all,
I am creating a report in SSRS and the data is obtained through a stored procedure. One of the parameters is Begin_Date. This is simply a date field. I need to have it on the Page Header section. However, when I placed it there and ran the report, I received the following error -
Error2[rsFieldInPageSectionExpression] The Value expression for the textbox ‘begindate’ refers to a field. Fields cannot be used in page headers or footers.
Is there a way around? I have never faced such a problem when I created reports in Crystal or ActiveReports. Please let me know whether I am missing anything.
Thanks in advance,
Saurav
Hi All,
I am having a main report having two subreports, say M1,S1 and S2 respectively.
The issue is S2 normally tend to go beyond one page, for all pages except first page of the of the subreport I am getting the page header and footer blank,
Actually this is not loading the ReportItems that are used in main report but it shows text boxes containing strings for eg . "My Name" and date functions eg Today()
Any Solution?
Thanks and Regards
Pragash
If a single row of data spans a page then the column header is not repeated until the next row on the next page.
Is there a way to overcome this?
While exporting a SSRS 2005 report in CSV format ,can we include the report headers and footers also to be exported .
Thanks .
What we've found is that when you have two reports where one navigates to the other, if you click on the second page of the second report, it takes you to the second page of the original report. If you navigate over to the subreport again and click for the second page, it works appropriately. This is definitely a no-go for production code and this may delay our ship date because I would think this is definitely undesirable.
Conditions:
ASP.NET Report Viewer using Remote Reports
Report that links to another report
Both reports return more than one page
Reporting Services installed
Steps to Reproduce:
Download the source code here.
Follow the directions (near the bottom of the post) to get the project set up.
Run it and click on a link in the first report to go to the second report.
Click the arrow for page 2 of the second report.
Notice how it takes you back to page 2 of the first report (this doesn't happen when you are in preview mode in the Reporting Services project and I don't believe it does this in a smart client application).
Click on a link in the first report to go back to the second report.
Click the arrow for page 2.
Notice how it takes you to page 2 of the second report.
Here is a link with source code and a more detailed explanation: http://geekswithblogs.net/robz/archive/2007/11/21/Reporting-Services-2005-BUG-Report-Linking-and-Paging---ASP.NET.aspx
So what I am looking for is both a workaround for now and if this is determined to be a bug, to be fixed in the next service pack.
I wanted to show header titles for each group of accounts. Ho would I be able to do that. The query that I have right now is:
select * from apcopah
where substring(ap_control_acct, 1, 4) = '1624'
and date_vendor_inv >= '2001-08-01'
or substring(ap_control_acct, 1, 4) = '1631'
and date_vendor_inv >= '2001-08-01'
or substring(ap_control_acct, 1, 4) = '1632'
and date_vendor_inv >= '2001-08-01'
I would like it to look like this:
Utilities
Ap_control_acct date_vendor_inv
1624 2001-10-01
1624 2001-12-01
Audit Fees
Ap_control_acct date_vendor_inv
1631 2002-09-01
1631 2002-10-01
Is this possible?
I'm new to Reporting Services, but am familiar with other reporting tools. My question is, is there really no way to reference a field in a page header? If so, I suppose you could repeat some header information on subsequent pages from the detail section of the report using a text box, but how is that done because when I check the property box "Repeat report item with data region on every page" nothing happens. What is the best way to repeat header information on every page that needs to contain field values/information?
Thanks for any help you can offer.
I see the Page Header and Page footer, but what about Report Header and Report Footers??? Doesn't look like ssrs has this ability, am I wrong??
View 6 Replies View RelatedI have set the option 'Headers should remain Visible while scrolling', in order to freeze the headers. However, on some reports, when I scroll down the report , the headers overlap each other .
Any ideas why this would happen?
I have an image stored in a dataset that I would like to place in the page header and footer. Unfortunately dataset fields can not be placed in headers/footers.
Embedded pics in the project and/or report are NOT an option as the report must pull the image from the database. UNLESS there is a way to embed it FROM the dataset.
Normally I use =ReportItems!FieldName, but this doesn't seem to work when dealing with images.
I put the image in the header row the table holding the report information, but there are some pitfalls. Consider the following: put the Image in the top left cell of the header rows (A1) , put my Report Title in Cell (A2) and finally put =Now() in cell (B2).
When the report renders Cell (A1) has grown to accomodate the size of the image, Cell (A2) is fine, but cell (A3 - the date-) is pushed down...as expected (boooo!)
I used the following function =Fields!ReportTitle.Value & chr(10) & chr(13) & Fields!ReportDate.Value in (A2) a slick solution, but the padding is different and I need different font sizes and weights. (...almost)
I moved the image in (a1) and the rest of the fields following respecfully (B1, C1, D1...) but with parameters the header is now practically half the page (...ok so that was a bit of an stretch)
I tried the RepeatsWith property and couldn't get it to work???? Am I using it correctly? I have a table in the body of a report (table1). Above it, I place the image. In the image properties, I choose RepeatWith and select table1, I expect to see the image repeat on each page, but that is not the case. I'm probably missing a simple explanation.
I even tried to pass the image as a parameter. URRRNT! At least with my experience.
Have I exhausted all possibilities without extensive code?
All I'm trying to do is line up the Image with the report Title/date/parameter values in the HEADER making the report look pretty.
Thanks for the help...
SSRS 2005 User
Hello All,
I have designed some reports and kept these reports in the report server.
My question is: I want to change report header and footer values dynamically and save the new values in the report template, when the user enters new velues in ASP.NET GUI.
Next time if the user opens the same file the report should display the recent values.
Please help me in passing the parameters from ASP.NET app to SQL Reports and saving the parameters in the report template.
Thanks,
Rao.
I have a report which runs for last 12 months data. Since this is going to be last 12 months the column headers change every month. How can we implement this with dynamic column headers in the dataset?
View 9 Replies View RelatedI have a report requirement, i am new to reports.
I want to have two lines of column headers.( with 7 columns in parent columns header)
and 7 columns in child column header.
The first column header will show a parent record.
And after the parent record i want to show the next child related horizontal column headers and will show all child record related to the above parent record.
its a one to many: 1 parent record and below all child records for that parent record.
can i use subreports controls to show all child records of the parent.
Thank you very much for the information.
Hi All,
In my SSRS report. I have a report which has only one page. In preview it is showing as only 1 page but when I am printing the report. I am getting two printouts with the second page as a blank.. Please help me in printing the page that contains report. Intially I used a Page header, at that it used to print the blank page with a header only. Now as I removed the header it is printing the page without header i.e Blank Page.. So please help me in prinitng a single page that has the report. It is urgent,..
Thanks
dotnetdev1
How do I add a hard page break in the middle of a two page report? I use Microsoft reports for windows.
View 5 Replies View RelatedI'm hoping that someone can shed some light on this for me... I'm using SSRS SP2 and I have a basic report using a single list object which, at the moment, should print only two pages based on the results of the underlying query. When previewing the report, it shows the two pages. But when the report is printed or exported, there is a blank page before each report page.
What I've done so far:
1) Verified the properties of the list object and made sure that 'Insert a page break before this list' is not checked
2) Ensured that there are no hidden objects that could be causing this behavior
3) Ensured that the report size + margins are within the boudaries of an standard 8.5x11 paper size
Any suggestions on something that would solve this issue?
Sam
How can i freeze the headers while exporting the report to excel? will this works in ssrs 2008 / 2008 r2?
View 2 Replies View RelatedMy problem is specific to the ReportViewer control. The report displays correctly in every other way (ssrs server viewer, visual studio preview, visual studio 'Run', etc)The aspx page hosting the control has two controls, the reportviewer control (assembly 10.0.0.0), and a scriptmanager control asyncrendering = 'true' and processingmode = 'remote'.So the columns are not 'always visible' with the reportviewer but they are with every other renderer that i've tried.
The report i'm testing is just a simple table with a couple groupings (built using the wizard). To enable the fixed headers I went to the groupings view and changed the "FixedData" property of the first Static member to true per instructions.
Hi:
I made a report that is 10 pages long. I like to show all the data in one page (after deployment). Any idea if this is possible?
Hi - I am pretty new to Reporting Services. I need to create a report where a single result row from the Select Statement populates an entire page of data. The regular grid or Matrix reports don't fit this need. Is there a simple way to do this?
Thanks - Dave
I have a table which has few columns as Numeric value. I need to export the output into a csv file as a report with column headers. I have used bcp command. Here column name and Column Header name is the same. The BCP query which i have used is Below
bcp "SelectCompanyCode,MonthId,ActualityCode,CompanyCounterpartCode,LocalProductCode,LocalCustomerBillTo,
DestinationCountryCode,LocalCostCenterCode,LocalGLAccountCode,LocalProjectCode,TXCurrencyCode,
TXAmountYTD,LocalCurrencyCode,LocalAmountYTD,SourceSystemFromTable(nolock)" queryout D: est.csv -c -t ";" -r -S -T
Is there any way to export bcp with header or any other command to generate the csv file.
How to display the subreport Headers/footers in Main report (in SSRS SQL server 2008 r2)?
View 4 Replies View RelatedI have a report which is multiple pages in the report viewer. Now I want to make it shown in the webpage report viewer just in one page. Is there any ways to realize it?
Thanks
How can I get only one page of data each time when I call the render menthod from the SSRS webservice
View 3 Replies View RelatedCan a person change the page title from "Report Viewer/Manager" to the actual report name?
View 3 Replies View RelatedHI, there,
I added a new windows user "ReportUser" which is a local user (not in administrator group). When I connect to the report manage's web page, I use reportuser to log in (when the anonymous access is disabled it will ask a log in). Report builder icon is not showing up on the report manager home page.
If I log in as a user in administrator group, the reportr builder icon shows up so I can download it and build report.
I have assigned reportuser "Content manager" and "repoter builder" access to the home folder. Is there anything else I have to do to make the report build icon show up on the home page?
Thanks
Jack
I want to repeat line on each page of report on PDF while using 2 columns on report. The problem is that if i use table border it will also repeat after second table. i want a line between two tables.
View 14 Replies View RelatedHow do I display multiple parameter values on report page from a multi-value report parameter. For example, I have a report parameter where users can select multiple attendance codes and I want them displayed at the top of the report after it's run.
Currently, only the first value is showing on the report.
Thanks.