Report Calling A Stored Procedure Taking Too Much Time While
Aug 23, 2007
I have a CLR stored proceudure than runs under 2 or 3 mins when run in management studio. But when the report calls the same SP, it runs in around 30 mins and the CPU usage goes to 90 or 100% and the sqlserver service uses massive amount of memory. Previously the report worked fine, only after made a few data driven subscriptions and redeployed the reports with minor changes that it began to happen.
Please help--Iam stumped.
There are no infinite loops in the report. I checked.
View 9 Replies
ADVERTISEMENT
Oct 6, 2005
Hi
I have one stored procedure and its taking 10 mins to execute. My stored procedure has 7 input parameters and one temp table( I am getting the data into temp table by using the input parameters) and also I used SET NOCOUNT ON. But if copy the whole code of the SP and execute that as regular sql statement in my query analyzer I am getting the result in 4 seconds. I am really puzzled with this.
What could be the reason why the SP is taking more than query,Unfortunately I can't post the code here.
Thanks.
View 1 Replies
View Related
Jan 30, 2007
I am trying to call a stored procedure from an asp.net application. If I execute the stored procedure in Query Analyzer it takes 1 second to execute, but when I am trying to call it from c# code it times out.
Ideas?
Thanks in advance.
View 4 Replies
View Related
Aug 7, 2007
I've tried to find this documented on the Internet and found Crystal Reports User's Guid online documentation (582 pages of it!) It looks like it will be helpful for my other questions, but what I'm trying to do right now is call a stored procedure from my crystal report. So in Field Explorer under Database Fields my stored procedure is there with the three columns it selects. How do I put these three columns on my report? I try dragging them to Section 3 details and they're there but when I preview the report all I get are the headers, not the records. Is there something else I need to do? It requires an input parameter which I am not getting prompted for - maybe that is my problem, without an input parameter it can't successfully run the stored procedure, so how do I make it prompt me?
Thanks for helping me with my first Crystal Report!
View 2 Replies
View Related
Oct 23, 2015
I am trying to call a stored procedure into report builder. The stored procedure has 2 parameters. When I run the report with allowing nulls and blank value in the parameters it works fine, but when I enter a value in a parameter it ignores the where clause I had in the original query(stored procedure) and displays everything.
View 3 Replies
View Related
Mar 23, 2008
Details :
Reporting Services 2000, SQL 2000 database, Visual Studio . Net 2003
In Report Design view
In "Data" tab, I can see records for column 'sRCName' returned from the stored procedure(usp_GetRouteCodeData) after clicking '!' icon. When I moved to "Preview" tab, I am getting below error message.
"The value expression for the textbox €˜sRCName€™ refers to the field €˜sRCName€™. Report item expressions can only refer to fields within the current data set scope or, if inside an aggregate, the specified data set scope."
Observation : there is no value returned from the dataset on 'Fields' panel. The SP is accessing a table called tblRCM.
If I go to the Data--> Dataset --> Query, change the "Command Type" from 'Stored Procedure' to 'Text' and entered
select * from tblRCM at Query string area, the report is running fine.
Issue: This issue only happens at my laptop, my team member can create the same report using the same stored procedure without any error. The database is sitting on a server.
In the troubleshooting process, I tried to create a simple report by calling a stored procedure(CustOrderHist) from NorthWind DB in my local SQL server, I am able to see the data/value in 'Fields' panel and sucessfully view the data in 'Preview' tab.
Looks like the issue only happen on my machine, for a report that using stored procedure to access a DB sitting on a server.
I hope to hear from anyone who have encountered the similiar issue before, or, have any clue to resolve the issue.
Thanks.
View 3 Replies
View Related
Aug 2, 1999
I have a stored procedure that normally takes about 5 hours to complete:
DELETE tblX WHERE PROC_DT < dateadd(day, -93 , getdate())
tblX has about 55 million records and has an index on PROC_DT.
I have this running as a scheduled task. Over the weekend, the task executed and it is still running 56+ hours later. Does anybody have any ideas as to where I should look for the problem? I am afraid to kill the process because of the rollback time.
View 4 Replies
View Related
Mar 3, 2008
Hi all,
I have 2 sets of sql code in my SQL Server Management Stidio Express (SSMSE):
(1) /////--spTopSixAnalytes.sql--///
USE ssmsExpressDB
GO
CREATE Procedure [dbo].[spTopSixAnalytes]
AS
SET ROWCOUNT 6
SELECT Labtests.Result AS TopSixAnalytes, LabTests.Unit, LabTests.AnalyteName
FROM LabTests
ORDER BY LabTests.Result DESC
GO
(2) /////--spTopSixAnalytesEXEC.sql--//////////////
USE ssmsExpressDB
GO
EXEC spTopSixAnalytes
GO
I executed them and got the following results in SSMSE:
TopSixAnalytes Unit AnalyteName
1 222.10 ug/Kg Acetone
2 220.30 ug/Kg Acetone
3 211.90 ug/Kg Acetone
4 140.30 ug/L Acetone
5 120.70 ug/L Acetone
6 90.70 ug/L Acetone
/////////////////////////////////////////////////////////////////////////////////////////////
Now, I try to use this Stored Procedure in my ADO.NET-VB 2005 Express programming:
//////////////////--spTopSixAnalytes.vb--///////////
Public Class Form1
Private Sub Button1_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles Button1.Click
Dim sqlConnection As SqlConnection = New SqlConnection("Data Source = .SQLEXPRESS; Integrated Security = SSPI; Initial Catalog = ssmsExpressDB;")
Dim sqlDataAdapter As SqlDataAdapter = New SqlDataAdaptor("[spTopSixAnalytes]", sqlConnection)
sqlDataAdapter.SelectCommand.Command.Type = CommandType.StoredProcedure
'Pass the name of the DataSet through the overloaded contructor
'of the DataSet class.
Dim dataSet As DataSet ("ssmsExpressDB")
sqlConnection.Open()
sqlDataAdapter.Fill(DataSet)
sqlConnection.Close()
End Sub
End Class
///////////////////////////////////////////////////////////////////////////////////////////
I executed the above code and I got the following 4 errors:
Error #1: Type 'SqlConnection' is not defined (in Form1.vb)
Error #2: Type 'SqlDataAdapter' is not defined (in Form1.vb)
Error #3: Array bounds cannot appear in type specifiers (in Form1.vb)
Error #4: 'DataSet' is not a type and cannot be used as an expression (in Form1)
Please help and advise.
Thanks in advance,
Scott Chang
More Information for you to know:
I have the "ssmsExpressDB" database in the Database Expolorer of VB 2005 Express. But I do not know how to get the SqlConnection and the SqlDataAdapter into the Form1. I do not know how to get the Fill Method implemented properly.
I try to learn "Working with SELECT Statement in a Stored Procedure" for printing the 6 rows that are selected - they are not parameterized.
View 11 Replies
View Related
Nov 1, 2007
Hi all - I'm trying to optimized my stored procedures to be a bit easier to maintain, and am sure this is possible, not am very unclear on the syntax to doing this correctly. For example, I have a simple stored procedure that takes a string as a parameter, and returns its resolved index that corresponds to a record in my database. ie
exec dbo.DeriveStatusID 'Created'
returns an int value as 1
(performed by "SELECT statusID FROM statusList WHERE statusName= 'Created')
but I also have a second stored procedure that needs to make reference to this procedure first, in order to resolve an id - ie:
exec dbo.AddProduct_Insert 'widget1'
which currently performs:SET @statusID = (SELECT statusID FROM statusList WHERE statusName='Created')INSERT INTO Products (productname, statusID) VALUES (''widget1', @statusID)
I want to simply the insert to perform (in one sproc):
SET @statusID = EXEC deriveStatusID ('Created')INSERT INTO Products (productname, statusID) VALUES (''widget1', @statusID)
This works fine if I call this stored procedure in code first, then pass it to the second stored procedure, but NOT if it is reference in the second stored procedure directly (I end up with an empty value for @statusID in this example).
My actual "Insert" stored procedures are far more complicated, but I am working towards lightening the business logic in my application ( it shouldn't have to pre-vet the data prior to executing a valid insert).
Hopefully this makes some sense - it doesn't seem right to me that this is impossible, and am fairly sure I'm just missing some simple syntax - can anyone assist?
View 1 Replies
View Related
Apr 9, 2008
Hi there i have a sql server 7 database that i copied across to another server this time running windows 2003 and sql server 8. I have a routine that runs every night on each machine. on the old machine it take about 2 hours to do. on this new machine it is taking up to 5.5 hours to do the exact same job. the results are the same but the time delay could become an issue later on so i would like to nip it in the bud now.
Does anyone ahe any suggestions as to why the code would run so much slower on a newer and better spec machine.
I have copied everything across so there is no difference in tables or stored procedures. is there an optimisation tool i can run ??
has anyone got any ideas ?
View 6 Replies
View Related
May 2, 2006
I have a stored procedure that is taking too long to complete. I'ved narrowed the problem down to the following code. Is there any reason why this should take long to complete for about 40,000 records?
UPDATE Entries
SET EntryStatus = 1, reason = 'code entered more than once'
WHERE TimeSubmitted > @StartOfPeriod AND TimeSubmitted < @EndOfPeriod
AND TimeSubmitted <> @t and ShortCode = @ShortCode
AND verbatim = @v
View 4 Replies
View Related
Apr 18, 2006
I had try calling a function, that call a store procedure, repeatly using a for loop, but I notice it will only get the expected part_id in the first time, and return an empty string sub-sequentially without throwing an exception. So I had try using a sql query instead, but the same thing happen. Below is my function, can you point out to me what's wrong?
My original version that calls a store procedure
Public Shared Function getPartId(ByVal part_supplierserialnumber As String) As String
Dim mySqlCommand As New SqlCommand
Dim mySqlConnection As SqlConnection = New SqlConnection(GetERATSConnectionString())
Dim myPart_id As String
mySqlCommand.CommandType = CommandType.StoredProcedure
mySqlCommand.CommandText = "getPartId"
mySqlCommand.Connection = mySqlConnection
mySqlCommand.Parameters.Add(New SqlParameter("@part_supplierserialnumber", part_supplierserialnumber))
Try
mySqlConnection.Open()
myPart_id = mySqlCommand.ExecuteScalar()
Catch ex As Exception
myPart_id = ""
Finally
mySqlConnection.Close()
mySqlConnection.Dispose()
End Try
Return myPart_id
End Function
My Store procedure
create procedure getPartId@part_supplierserialnumber as nvarchar(50)as
select top 1 part_id from tblPtSingapore where part_supplierserialnumber = @part_supplierserialnumber order by part_datecreated desc
GO
The new version I tried which happen the same thing
Public Shared Function getPartId(ByVal part_supplierserialnumber As String) As String
Dim myPart_id As String
Dim strSql As String = "select top 1 part_id from tblPtSingapore where part_supplierserialnumber = '" & part_supplierserialnumber & "' order by part_datecreated desc"
Dim mySqlConnection As SqlConnection = New SqlConnection(GetERATSConnectionString())
Dim mySqlCommand As New SqlCommand(strSql, mySqlConnection)
Try
mySqlConnection.Open()
myPart_id = mySqlCommand.ExecuteScalar()
Catch ex As Exception
myPart_id = ""
Finally
mySqlConnection.Close()
mySqlConnection.Dispose()
End Try
Return myPart_id
End Function
View 2 Replies
View Related
Feb 4, 2008
Hi,I'm tring to call a stored procedure i'v made from a DNN module, via .net control.When I try to execute this sql statement: EXEC my_proc_name 'prm_1', 'prm_2', ... the system displays this error: Could not find stored procedure ''. (including the trailings [".] chars :)I've tried to run the EXEC statement from SqlServerManagement Studio, and seems to works fine, but sometimes it displays the same error. So i've added the dbname and dbowner as prefix to my procedure name in the exec statement and then in SqlSrv ManStudio ALWAYS works, but in dnn it NEVER worked... Why? I think it could be a db permission problem but i'm not able to fix this trouble, since i'm not a db specialist and i don't know which contraint could give this problem. Also i've set to the ASPNET user the execute permissions for my procedure... nothing changes :( Shoud someone could help me? Note that I'm using a SqlDataSource object running the statement with the select() method (and by setting the appropriate SelectCommandType = SqlDataSourceCommandType.StoredProcedure ) and I'm using the 2005 sql server express Thank in advance,(/d
View 3 Replies
View Related
Oct 10, 2006
Hi,I am getting error when I try to call a stored procedure from another. I would appreciate if someone could give some example.My first Stored Procedure has the following input output parameters:ALTER PROCEDURE dbo.FixedCharges @InvoiceNo int,@InvoiceDate smalldatetime,@TotalOut decimal(8,2) outputAS .... I have tried using the following statement to call it from another stored procedure within the same SQLExpress database. It is giving me error near CALL.CALL FixedCharges (@InvoiceNo,@InvoiceDate,@TotalOut )Many thanks in advanceJames
View 16 Replies
View Related
Mar 2, 2007
Hello people,
When I am trying to call a function I made from a stored procedure of my creation as well I am getting:
Running [dbo].[DeleteSetByTime].
Cannot find either column "dbo" or the user-defined function or aggregate "dbo.TTLValue", or the name is ambiguous.
No rows affected.
(0 row(s) returned)
@RETURN_VALUE =
Finished running [dbo].[DeleteSetByTime].
This is my function:
ALTER FUNCTION dbo.TTLValue
(
)
RETURNS TABLE
AS
RETURN SELECT Settings.TTL FROM Settings WHERE Enabled='true'
This is my stored procedure:
ALTER PROCEDURE dbo.DeleteSetByTime
AS
BEGIN
SET NOCOUNT ON
DECLARE @TTL int
SET @TTL = dbo.TTLValue()
DELETE FROM SetValues WHERE CreatedTime > dateadd(minute, @TTL, CreatedTime)
END
CreatedTime is a datetime column and TTL is an integer column.
I tried calling it by dbo.TTLValue(), dbo.MyDatabase.TTLValue(), [dbo].[MyDatabase].[TTLValue]() and TTLValue(). The last returned an error when saving it "'TTLValue' is not a recognized built-in function name". Can anybody tell me how to call this function from my stored procedure? Also, if anybody knows of a good book or site with tutorials on how to become a pro in T-SQL I will appreciate it.
Your help is much appreciated.
View 6 Replies
View Related
Mar 23, 2007
Hi, i've had this query method:
34 public void AddDagVerslagCategorie(int logID, HistoriekDetail historiekDetail)35 {36 SqlConnection oConn = new SqlConnection(_connectionString);37 string strSql = "Insert into LogDetail (LogID, CategorieID, Inhoud)";38 strSql += "values(@logID, @categorieID, @inhoud)";39 SqlCommand oCmd = new SqlCommand(strSql, oConn);40 oCmd.Parameters.Add(new SqlParameter("@logID", SqlDbType.Int)).Value = logID;41 oCmd.Parameters.Add(new SqlParameter("@categorieID", SqlDbType.Int)).Value = historiekDetail.CategorieID;42 oCmd.Parameters.Add(new SqlParameter("@inhoud", SqlDbType.VarChar, 100)).Value = historiekDetail.Inhoud;43 44 try45 {46 oConn.Open();47 int rowsAffected = oCmd.ExecuteNonQuery();48 if (rowsAffected == 0) throw new ApplicationException("Fout toevoegen historiek detail");49 oCmd.CommandText = "select @@IDENTITY";50 oCmd.Parameters.Clear();51 historiekDetail.HistoriekDetailID = (int)(decimal)oCmd.ExecuteScalar();52 }53 catch (Exception ex)54 {55 throw new ApplicationException("Fout toevoegen historiek detail: " + ex.Message);56 }57 finally58 {59 if (oConn.State == ConnectionState.Open) oConn.Close();60 }61 }
which i've converted to a stored procedure: 1 ALTER PROCEDURE [dbo].[insert_DagVerslagDetail]
2 -- Add the parameters for the stored procedure here
3 @dagverslagdetailID int,
4 @logID int,
5 @categorieID int,
6 @inhoud varchar(100)
7 AS
8 BEGIN
9 -- SET NOCOUNT ON added to prevent extra result sets from
10 -- interfering with SELECT statements.
11 SET NOCOUNT ON;
12 SET @dagverslagdetailID = SCOPE_IDENTITY()
13
14 -- Insert statements for procedure here
15 BEGIN TRANSACTION
16 INSERT LogDetail (LogID, CategorieID, Inhoud)
17 VALUES(@logID, @categorieID, @inhoud)
18 COMMIT TRANSACTION
19 END
Now i would like to call that stored procedure in my previous method, so i've changed it to this:
1 public void AddDagVerslagCategorie(int logID, HistoriekDetail historiekDetail)
2 {
3 SqlConnection oConn = new SqlConnection(_connectionString);
4 string strSql = "insert_DagVerslagDetail";
5 strSql += "values(@logID, @categorieID, @inhoud)";
6 SqlCommand oCmd = new SqlCommand(strSql, oConn);
7 oCmd.CommandType = CommandType.StoredProcedure;
8 oCmd.Parameters.Add(new SqlParameter("@logID", SqlDbType.Int)).Value = logID;
9 oCmd.Parameters.Add(new SqlParameter("@categorieID", SqlDbType.Int)).Value = historiekDetail.CategorieID;
10 oCmd.Parameters.Add(new SqlParameter("@inhoud", SqlDbType.VarChar, 100)).Value = historiekDetail.Inhoud;
11
12 try
13 {
14 oConn.Open();
15 int rowsAffected = oCmd.ExecuteNonQuery();
16 if (rowsAffected == 0) throw new ApplicationException("Fout toevoegen historiek detail");
17 oCmd.CommandText = "select @@IDENTITY";
18 oCmd.Parameters.Clear();
19 historiekDetail.HistoriekDetailID = (int)(decimal)oCmd.ExecuteScalar();
20 }
21 catch (Exception ex)
22 {
23 throw new ApplicationException("Fout toevoegen historiek detail: " + ex.Message);
24 }
25 finally
26 {
27 if (oConn.State == ConnectionState.Open) oConn.Close();
28 }
29 }
Do i still need the lines 17 oCmd.CommandText = "select @@IDENTITY";
19 historiekDetail.HistoriekDetailID = (int)(decimal)oCmd.ExecuteScalar();
Because i've declared the identity in my stored procedure
View 1 Replies
View Related
Apr 8, 2008
Hi, I have a stored procedure, and it is expecting an output. If I declared the passing varaible as ref, it compiles fine, but it is not returning any value. If I pass the varaible as out, and add the paramater
MyComm.Parameters.Add(new SqlParameter("@ReturnValue", returnValue)); it gives the following error.
Compiler Error Message: CS0269: Use of unassigned out parameter 'quoteID'.
And if I don't supply the previous statement, the following error occurs.
System.Data.SqlClient.SqlException: Procedure 'CreateData' expects parameter '@ReturnValue', which was not supplied.
How Can I fix this? thanks.
View 2 Replies
View Related
Dec 15, 2003
I have a stored procedure that calls a DTS package to grab a text file that has been uploaded to the server and merge it with a table on the database. The DTS package works woderfully in SQL, as does the the file upload. The problem arrises when I create a stored procedure to run the DTS package. I know that you have to shell out and do a command line on the SQL server (and I think that I got the syntax correct) but its calling the Stored Procedure in the ASP.NET app that is causing me hardship. Here is the code that I have so far:
Stored Procedure:
CREATE PROCEDURE spSampleData AS exec master..xp_cmdshell 'dtsrun /SZEUSsqlServer113 /NdtsPackage /UuserID /Ppassword'
GO
VB to run DTS:
Dim myCommand As SqlCommand
myCommand.CommandType = CommandType.StoredProcedure
myCommand.CommandText = "spSampleData"
myCommand.ExecuteNonQuery()
I'm not sure what I am doing wrong but any help would be great.
Thanks!
View 3 Replies
View Related
Feb 6, 2004
I am trying to set up a call to a Stored Procedure to do an Insert. Here is my code snippet:
<%@ Page Language="VB" %>
<%@ import Namespace="System" %>
<%@ import Namespace="System.Data.SqlClient" %>
.
.
.
Dim loConn as New SqlConnection(ConfigurationSettings.AppSettings("ConnectionString"))
Dim cmdInsert as New SQLCommand("AdminUser_Insert", loConn)
cmdInsert.CommandType = CommandType.StoredProcedure
Dim InsertForm As New SqlDataAdapter()
InsertForm.InsertCommand = cmdInsert
cmdInsert.Parameters.Add(New SqlParameter("@RETURN_VALUE", SqlDbType.bigint, 8, "Account_Number"))
cmdInsert.Parameters("@RETURN_VALUE").Direction = ParameterDirection.ReturnValue
cmdInsert.Parameters.Add(New SqlParameter("@UserID", SqlDbType.varchar, 50, "UserID"))
cmdInsert.Parameters("@UserID").Value = Request("UserID")
cmdInsert.Parameters.Add(New SqlParameter("@Password", SqlDbType.varchar, 32, "Password"))
cmdInsert.Parameters("@Password").Value = Request("Password")
cmdInsert.Parameters.Add(New SqlParameter("@First_Name", SqlDbType.varchar, 32, "First_Name"))
cmdInsert.Parameters("@First_Name").Value = Request("FirstName")
cmdInsert.Parameters.Add(New SqlParameter("@Middle_Name", SqlDbType.varchar, 32, "Middle_Name"))
cmdInsert.Parameters("@Middle_Name").Value = Request("MiddleName")
cmdInsert.Parameters.Add(New SqlParameter("@Last_Name", SqlDbType.varchar, 32, "Last_Name"))
cmdInsert.Parameters("@Last_Name").Value = Request("LastName")
loConn.Open()
command.ExecuteNonQuery()
loConn.Close()
I get the following error:
Compilation Error
Description: An error occurred during the compilation of a resource required to service this request. Please review the following specific error details and modify your source code appropriately.
Compiler Error Message: BC30451: Name 'CommandType' is not declared.
This error happens on the line: cmdInsert.CommandType = CommandType.StoredProcedure
Any help would be appreciated,
Greg
View 2 Replies
View Related
May 22, 2000
Hello everybody,
How can I call DTS from stored procedure, any help pls.
PS: I appreciate if you please give me an example.
Thank you....
View 2 Replies
View Related
Jan 19, 2001
I'm trying to call a job from a stored procedure.
To do so, I've found that sp_start_job is doing just that.
My problem is that the sp_start_job is not in my master
database stored procedures and I don't know how to add it.
I'm working with SQL Server 7 Enterprise without the SP.
Am I looking for the right thing ? (sp_start_job)
Where can I find it ?
View 1 Replies
View Related
Nov 3, 2005
Hey, I have a parent SP, and within that parent I want to call a a child what is the code to call that child procedure? or teh easiest way to make that happen?
View 1 Replies
View Related
Jan 30, 2004
Can someone tell me a straightforward way to call a VB app (that accepts command line arguments) from a stored procedure.
I have got it to work by using xp_cmdshell, but in practice, the security constraints here prevent using this. Our DBAs don't want to set the proxy account required for a non-sysadmin user to eexecute xp_cmdshell.
I know that writing an extended SP invoking a C++ dll would be the cleanest solution. However I don't have the knowledge to do that.
Any ideas?
Thanks
View 1 Replies
View Related
Apr 7, 2004
When I call a stored procedure from a dll written in Builder C++, it gets blocked. But if I call the same SP from the main program, it works fine. but I need to call SP from the dll. What's the problem?
Thanks...
View 1 Replies
View Related
Apr 29, 2008
Hi,
I am new to SQL and new to stored procedures!
What I am trying to do is call one stored procedure from another stored procedure. Very simple piece of code but can not get it to work correctly.....
This is the calling stored procedure: sp_TechRiskMandatory. It is calling a stored procedure called sp_Test.
What is happening is that it is executing the line before the "EXECUTE" command and never getting to this line.
If I put the "EXECUTE" command first it will execute this line and not get to the next.
My code is returning out of the stored procedure before finishing executing the remainder of the code....
CREATE PROCEDURE [sp_TechRisk_Mandatory]
@Conclusion varchar(100),
@TechRisk varchar(100)
AS
If (@Conclusion = 'Application/Changed') and ((@TechRisk = " ") or (@TechRisk = "N/A"))
Begin
Select "AsxErrorMessage" = "Technical Risk must be specified"
EXECUTE sp_Test
End
Else
Begin
Select "Looks Good" = " "
EXECUTE sp_Test
End
GO
This is the code for the sp_Test:
CREATE PROCEDURE sp_Test
AS
BEGIN
Select "AsxErrorMessage" = "Test"
END
GO
View 2 Replies
View Related
May 30, 2008
I know this thread is sql, and i'm asking a vb.net question but I cannot find a straight forward answer anywhere else. I am using visual studio 2008 designing a vb.net application where I created a stored procedure using sql management studio 2005. Here is the stored procedure:
CREATE PROCEDURE dbo.StoredProcedure2
@intPID char(10)
AS
SELECT SUM(Financial.Fee) from dbo.Financial
WHERE
CONVERT(DATETIME, FLOOR(CONVERT(FLOAT, getdate())))=CONVERT(DATETIME, FLOOR(CONVERT(FLOAT, Financial.Date)))
AND [SPatient Number]=@intPID
/* SET NOCOUNT ON */
RETURN
It takes the sum of my Fee column in my financial table where the current date is equal to the column named Date in my Financial table and SPatient Number equals my variable intPID, which the value is defined for in my application (yes, i know that is a horrible name for a column but I cannot change it for it is not my project).
Now, to my knowledge this procedure works fine and should output a single value. However, like i said, i am using visual studio 2008 and therefore am using vs's more automated way of connecting to sql servers(and by that I mean configuring the server through visual studio rather than manually defining datasets, dataadapters, and connection strings through code) All of the tutorials I find use data adapters and are done by manually declaring sql connections and so forth. I like visual studios more automated method of doing sql tasks, and would like to know if there is a simple way to call a stored procedure using visual studio in such a fashion where I would write something like "exec dbo.StoredProcedure2 'intPID' "
Any help is much appreciated, thank you
edit: If i did not provide enough information please let me know, i'm using a strongly typed dataset
View 1 Replies
View Related
Jun 10, 2008
I understand how to call a stored procedure using ordinal arguments, such as:
exec storedprocedure argument1 argument2
How do you do it while naming the arguments, and passing non-ordinal?
Thanks!
View 2 Replies
View Related
Nov 19, 2014
I have three stored procedure already created ABC. Now I need to create another one and call other three in each situation. Like If Apple then use Sp_A, if Orange then use Sp_B, and if Mango then use sp_C.
View 16 Replies
View Related
Mar 28, 2006
Hi all, I'm new to SQL Server and I'm trying to call BCP from a stored procedure with a parameter passed in as the path to which to export the datafile. This parameter is also the name of a network PC. However, I keep getting this error:
SQLState = S1000, NativeError = 0
Error = [Microsoft][ODBC SQL Server Driver]Unable to open BCP host data-file
NULL
This is the stored procedure:
PROCEDURE DownloadLinkEvents
@localPath varchar(80)
AS
declare @bcpCommand varchar(200)
begin
set @bcpCommand = 'bcp <dbName> out ' + @localPath + '-c -t"|" -S<dbServer> -Usa -P<passowrd>'
exec master..xp_cmdshell @bcpCommand
end
Thanx.
View 3 Replies
View Related
Feb 29, 2008
Hi,
This is probably the most basic of solutions, but I have spent the last 3 hours trying to work it out, and searching google!
I am trying to call information from a stored procedure (B), from within another stored procedure (A). The select statement from Procedure A contains information to be passed to Procedure B, to get some information.
This is the Procedure I have come up with so far, and I have included dbo.USERS_MEMBERSHIPSTATUS.STATUS(2, dbo.Members.EntryID) as part of the SELECT clause, in a vain attempt that this would work....but it dosn't!
Anyone got any ideas of how to do this? Or even what it would be called so I can start making inteligent searches on google?
USE [QP]
GO
/****** Object: StoredProcedure [dbo].[USERS_LIST] Script Date: 02/29/2008 18:24:16 ******/
SET ANSI_NULLS ON
GO
SET QUOTED_IDENTIFIER ON
GO
ALTER Procedure [dbo].[USERS_LIST]
@STYPE Int, @UserID Int, @Username varchar(100), @Surname varchar(100), @DOB VarChar(40), @Location varchar(100), @Email Varchar(100), @Mobile varchar(100)
As
SELECT TOP 100 PERCENT dbo.Members.EntryID, dbo.Members.EntryDate, dbo.Members.Username, dbo.Members.Forename, dbo.Members.Surname, dbo.Members.Gender,
dbo.Members.DateofBirth, dbo.Members.LastAction, dbo.Members.AdminUser, dbo.ActiveMember_Mobile.Value AS Mobile,
dbo.ActiveMember_Email.Value AS Email, dbo.ActiveMember_Location.Location1, dbo.ActiveMember_Location.Location2, dbo.ActiveMember_Location.Location3,
dbo.ActiveMember_Location.Location4, dbo.F_AGE_IN_YEARS(dbo.members.dateofbirth, GetDate()) As Age, dbo.USERS_MEMBERSHIPSTATUS.STATUS(2, dbo.Members.EntryID)
FROM dbo.Members INNER JOIN
dbo.ActiveMember_Location ON dbo.Members.EntryID = dbo.ActiveMember_Location.UserID LEFT OUTER JOIN
dbo.ActiveMember_Email ON dbo.Members.EntryID = dbo.ActiveMember_Email.UserID LEFT OUTER JOIN
dbo.ActiveMember_Mobile ON dbo.Members.EntryID = dbo.ActiveMember_Mobile.UserID
WHERE @STYPE = '1' AND ((dbo.Members.EntryID = @UserID) or
(dbo.Members.Username = @Username) or
(dbo.Members.Surname = @surname) or
(dbo.Members.DateofBirth = Convert(datetime, @DOB)) or
(dbo.ActiveMember_Location.Location2 = @Location) or
(dbo.ActiveMember_Location.Location3 = @Location) or
(dbo.ActiveMember_Location.Location4 = @Location) or
(dbo.ActiveMember_Email.value = @Email) or
(dbo.ActiveMember_Mobile.value = @Mobile))
ORDER BY dbo.Members.Username
View 1 Replies
View Related
Aug 11, 2005
wanted to use sp_OACreate, sp_OAMethod and sp_OADestroy to execute aDTS package from a stored procedure. I had the dba (using the saaccount) create a wrapper stored procedure as recommended inhttp://msdn.microsoft.com/library/d...rary/en-us/dnsq....However, when I executed the wrapper stored procedure, I stillreceived privilege errors from the underlying sp_oa extended storedprocedures.Server: Msg 229, Level 14, State 5, Procedure sp_OACreate, Line 6EXECUTE permission denied on object 'sp_OACreate', database 'master',owner 'dbo'.Any ideas on what we could be doing wrong, or any suggested resolutionswould be appreciated.Thank you.
View 1 Replies
View Related
Aug 25, 2005
I have a created a report that needs to call a sybase Stored Procedure, my connection string is fine. I am able to call the sp from sql advantage passing in several parameters and it runs just fine. However when I created a dataset and tried to call it through the reporting service I get the following error message.
View 5 Replies
View Related
Oct 2, 2007
I wrote a stored a stored procedure in SQL 2005 which finds a specific number. If I execute the procedure in SQL it finds the correct number. I want to call this stored procedure from within Visual Basic 2005 so I can use it in my program.
Any thoughts???
View 1 Replies
View Related
