Report - Preview Looks Fine, But Exporting To PDF Splits Controls!!!Help!!
Feb 11, 2007
Hi, I've build correctly my report using the most efficient tools. I've made the preview and it worked just fine!However, when I export to PDF, it splits the report heigth into two pages, having the columns of my table and other controls splitted.
I'm already using the font size as 7 or 8 (depends), really small, I've tried hard to reduce their size, however the result remains the same...no resolution!!
Is there anybody who may have or had this situation?Any guests or help?Thanks a lot!
View 6 Replies
ADVERTISEMENT
Nov 29, 2006
I have developed a custom report item that works fine in design and preview mode while in Visual Studio. I cannot get it to show up on my deployed reports. Here's what I have done so far:
1. Deployed the report using Visual Studio
2. updated the rsreportserver.config file with the following entry:
<ReportItems>
<ReportItem Name="PedigreeChart" Type="Uabr.Rap.PedigreeChart.PedigreeChartRenderer, Uabr.Rap.PedigreeChart" />
</ReportItems>
3. Updated the rssrvpolicy.config file with the following entry.
<CodeGroup
class="UnionCodeGroup"
version="1"
PermissionSetName="FullTrust"
Description="This code group grants Uabr.Rap.PedigreeChart.dll FUllTrust permission. ">
<IMembershipCondition
class="UrlMembershipCondition"
version="1"
Url="C:Program FilesMicrosoft SQL ServerMSSQL.3Reporting ServicesReportServerinUabr.Rap.PedigreeChart.dll" />
</CodeGroup>
I've also tried using the StrongNameMembershipCondition with no better results.
4. The dll and its dependencies are copied to the bin directory of the report server.
5. When I load a report with this custom report item on it, the report loads fine with no errors or warnings in the log file (even with verbose tracing). The area where the custom item should be is just white. It's almost like Reporting Services isn't registering the item correctly.
This is particularly frustrating because the report works fine in Visual Studio - apparently I configured that correctly. Any suggestions would be greatly appreciated. I'm stumped.
View 6 Replies
View Related
Aug 12, 2007
After resolving all the installation and configuration related issues, I was able to deploy a couple of projects on my report server. I can see alll folders and reports listed inside the folders from http://<servername>/reports . All works fine except when I run a report, the http://<servername>/Reports/Pages/Report.aspx page does not render report.
This page displays View, Properties, History Subscriptions etc, menu items on the top section of the page. It also displays Home, My Subscriptions, Site Settings, Help etc. links on top right corner of the page. I can also see the bar that has "New subscription" button. But the problem starts from the section below that. It does NOT display the Report navigation bottons (like First page button, Next Page button, previous page button, Last page button, print button etc.) Appears that the icons images for these bottons are missing. And above all, the page does not render report.
IE browser status indicate the following error:
error:'HoevrImagectl161_ctl01_ctl01_ctl06_ctl01' is null or not an object.
The report renders fine via http://<servername>/ReportServer/Pages/ReportViewer.aspx
I may not have explained the problem well here however, if you are interested, I can email you the screenshot of Report.aspx to help you understand the problem.
Any help is appreciated!!!
View 6 Replies
View Related
Feb 1, 2008
Does anyone know, or direct me to an example of, how to print a SERVER report directly to a printer from a windows application? There are plenty of examples on the internet that shows how to do this with a local report but a SERVER report seems to be a whole other animal.
Thanks,
Mark
View 4 Replies
View Related
Feb 29, 2008
Is there a way of previewing a report without executing the dataset? Problem is when I make changes to the layout of the report it is taking a while before the report renders.
While I am developing my reports and working on the layout, changing colours, fonts etc it would be good to have an option which uses local data only.
Is there an option like this?
View 3 Replies
View Related
May 4, 2007
Hi there,
I'm working on an invoice report, that requires borders around the whole report. I've got header, footer and body in the report. In the body section, i've got a table which shows line items for an invoice. So the table grows as per the no. of lines in the invoice. As said before I've got to have border around the report. I tried put info in ractangles with borders for header/footer and table with borders in body section. The borders appears fine for headers and footer ractangles but as the table grows/shrinks, border from body section is not continuous to the footer section. i.e. For an invoice with 2 line items the borders for table will appear for two lines only but i want it to be scratched up to the footer area regardless of no. of line items in the invoice.
I've also tried to use borders for header, footer and body sections itself rather than using ractangles. But then when i export the report to pdf and print from pdf, it looks fine but when i tried to print from report manger its missing right hand side border for page header, footer and body. I've made sure there is enough margin around report. Report body/header/footer are 19 cm wide that's mean the report still have 2 cm of space for margins. The left/right margin are 0.5 cm.
I've been trying to do various things for last 2 weeks but not getting anywhere. Can i anyone please help into this?
Thanks,
Vivek
View 1 Replies
View Related
Jul 16, 2015
In ssrs preview tab and When i export to excel i am getting the rows wrapped up (Please see current output below) but i want LOB and description in each row (Please see Expected output below).
LOBdescription statusJan-15Feb-15Mar-15Apr-15May-15Jun-15Jul-15
CFC RISK DO NOT USE - HIPAA 278 - INPATIENT APPROVED 1
CLOSED 147831007311326048
INPROCESS 16
DO NOT USE - HIPAA 278 - OUTPATIENT CLOSED 1
Behavioral Health APPROVED 262516222015
CLOSED 853422
DENIED 51232
[code]....
View 0 Replies
View Related
Mar 17, 2008
Hi,
I have to try Report Designer Preview and i have to make a demo for a client.
I have 2 problems.
* We need Report Designer Preview to be the end-user Report Maker Tool. But, it doesn't have the Query Designer and the MDX Query Designer. In future version of MSSQL2008, is it integrated ?
* We work with MOSS 2007 and i just want to know if it's possible to deploy directy from Report Designer Preview to a Sharepoint with Reporting Services in Integrated Mode.
If it's not, is it preview to have it ? and when ?
Thanks for your help. (if you know people from Microsoft who can help me for features in future version, thanks to forward me his email).
Cédric Boulton
View 1 Replies
View Related
Jan 22, 2008
Is it possible to initiate debugging a stored procedure in VS2005 by viewing the report (that calls the stored procedure) in preview mode?
Thanks,
-cs
View 1 Replies
View Related
Sep 7, 2007
I am on SQLServer 2005
I have a sp with lot of params. I checked my sp. It works fine for every param.
My dataset is using the sp. It seems to pick the field list and params, but it will not return any result. I passed the same param to the ds as I did to sp. But, the report preview seems to alternate between displaying all data irrespective of the rpt criteria or nothing.
I do not have permission to run trace on the server
Any idea how to resolve this?
View 3 Replies
View Related
Aug 29, 2006
I have a .rdl file which I opened in visual studio 2005. I answered Yes to the prompt Microsoft Report Designer. . . Do you want to convert this file? [Yes] Then I saved the file.
The issue is when I am in Visual Studio and click on the Preview tab, I get the following error:
[rsErrorLoadingCodeModule] Error while loading code module: €˜x.ReportDefinitionsHelper, Version=1.0.0.0, Culture=neutral, PublicKeyToken=null€™. Details: Could not load file or assembly 'AdvancedMD.Report.ReportDefinitionsHelper, Version=1.0.0.0, Culture=neutral, PublicKeyToken=null' or one of its dependencies. The system cannot find the file specified.
There was a <CodeModule> which existed prior to the conversion and the preview worked fine.
I tried to re-add the reference by clicking on the Layout tab then go to the report properties tab. Then, under references I clicked on the collection and browsed to the file which I wanted to reference and clicked ok, but I still get the error above when I click on the Preview tab. I tried to remove the reference save then come back in and add it again, but it still gives the error above.
The file I am trying to add to <CodeModule> (x.ReportDefinitionsHelper) references the following:
System
System.Data
System.Xml
Any help would be greatly appreciated.
Thanks
(I can load the .rdl to reporting services 2005 and go into Reporting Services Manager and view the report without any issues.)
View 4 Replies
View Related
May 2, 2007
My report worked fine for a while, but suddenly I started getting the following errors for Preview:
An error occurred during local report processing.
An error has occurred during report processing.
Index was outside the bounds of the array.
I restarted VS, then rebooted my machine and the problem persists. Everything including the report posted to the server works fine. It is just the Preview of this report does not work any more. Preview of other reports work fine.
Any tip to resolve this problem would be greatly appreciated.
View 4 Replies
View Related
Aug 1, 2005
I wrote a report today containing one grouping. Everything appears all right in the report preview, except that every other page is "blank", i.e., shows only the page header and page footer; all grouping and detail information is missing.Â
The data on the page following the blank page seems to pick up where the previous non-blank page left off, so all information seems to be present within the report.The report width and height properties are typical portrait-style  -- 8.5 x 11 inches. The columns do not "run off the edge" of the report page boundary. I haven't selected any page break for the grouping, as the grouping detail is typically only a few rows long, and would otherwise result in a very large number of pages.Â
View 21 Replies
View Related
Apr 10, 2008
Hi,
I've created an SSRS report in Visual Studio 2005 which runs fine in the preview. I have a list of server names which when clicked on expands to a list of databases on the chosen server. When I click on a database it then queries a table of information and displays information on that database. The query is something like:
SELECT * FROM MyDB.dbo.DB_info
WHERE ServerName = @ServerName and DBname = @DBname
This works fine in preview mode. When I run it in SQL Management Studio via the Custom Reports menu it only works when the chosen server is the one that contains MyDB. I've run a trace and can see the query being issued when I use preview mode. However, when I run it from SSMS I don't see any query being issued to the database. This seems strange as it does return data in the instance described above and if I put MyDB into single-user mode it then complains that it can't access it so it is obviously trying to communicate with the database but not showing up on the trace. I've selected all events and only put a filter on the database name.
Seeing as all of the information is in the same table it seems odd that they query only works when the server name is the one where the database is held and that the query is not shown up in a trace. I'm running the report under the same credentials too.
I'm completely baffled by this so I'd be very grateful if someone could explain what might be happening here.
Thanks.
View 4 Replies
View Related
May 9, 2007
Hi, I am porting a massive VB6 project to ASP.net 2005. Most of the code is fine, however because the original developers used lots of data controls and my own time restrictions I thought to replicate the functionality by using Sqldatasource controls instead.
These data controls are bound to DBtruegrids. The project has has lots of code like...
AdodcOrders.Recordset.RecordCount > 0 or If AdodcOrders.Recordset.EOF or AdodcOrders.Recordset.MoveNext() or
AdodcDetail.Recordset!FieldName
The problem is the sqldatasource control doesn't have a recordset/dataset property which I can access and manipulate, or does it? What should I do to get round these? The project has thousands of lines like this in so its not feasible to rewrite it (although if I could I would!).
Any suggestions please gratefully appreciated.
many thanks
mike
View 1 Replies
View Related
Jan 28, 2008
Hi SSRS Experts
I'm trying to create a report using a SAP BI InfoCube as my datasource.
One of the fields in the InfoCube (GL Account) consist of a 3 level hierarchy, which need to be reported on.
The query that I built using QueryBuilder executes fine and displays the hierarchies correctly, but when I preview the report, i get the following error:
An error occurred during local report processing
An error has occurred during report processing
Query execution failed for data set "SAPBWD"
The "0GL_ACCOUNT 1000IE" Object was not found.
0GL_ACCOUNT is the GL account field to report on
1000IE is the selected GL Account Hierarchy to be displayed
Here's the query that was generated using query builder:
SELECT NON EMPTY { [Measures].[D2A3Y7ANS9YOF2FONXMUS9RAI] } ON COLUMNS, NON EMPTY {[0GL_ACCOUNT 1000IE].[LEVEL03].ALLMEMBERS * [ZF_MC].[LEVEL01].ALLMEMBERS } DIMENSION PROPERTIES MEMBER_CAPTION, MEMBER_UNIQUE_NAME ON ROWS FROM [ZFGL_M03/ZREP_BOR001] CELL PROPERTIES VALUE, BACK_COLOR, FORE_COLOR, FORMATTED_VALUE, FORMAT_STRING SAP VARIABLES [ZFV_FY] INCLUDING [0FISCYEAR].[Z12007] [ZFV_PC] INCLUDING [0PROFIT_CTR 1000FS].[10000001000033] [ZFV_RM] INCLUDING [0FISCPER3].[005] [ZFV_PV] INCLUDING [0VERSION].[003]
I hope you would be able to assist.
Kind Regards
Utian Goliath
View 1 Replies
View Related
Apr 11, 2008
I created a dataset based on a stored procedure. There are nine input parameters. When I click on the preview tab, it is asking me for ten input parameters.
I double checked my dataset on the data tab, and it only shows the expected nine parameters when I look at the parameters tab. I can also run the query without issue from the data tab.
I have no idea why it is asking for an extra parameter on the preview tab. It is a column name that does exist in my database, but is in no way used in the stored procedure in question.
Has anyone else run into a similar situation?
View 1 Replies
View Related
Sep 12, 2007
Hi,
I'm using the SSRS report designer within VS2005 and I have a .rdl report that I have placed a background form as an image background. I then have text placed on top of the form, the problem is that everything is aligned within the report designer layout view but when I go to view the report in report preview the text no longer remains vertically aligned within the background form.
This is very frustrating, and almost makes it impossible to marry up a form with report data. Any help would be appreciated.
View 5 Replies
View Related
Apr 17, 2008
I created some controls for filtering the report that will be displayed on the same page, but below these controls. The controls take about 200px of the top of the form, while the report will be displayed in the rest of the page.
I'm using the ReportViewer control in Async mode, so it's being rendered as an Iframe, and this is necessary because some reports will take up to a couple minutes, so I want the loading animation.
As many of you know, this type of scenario will cause two scrollbars to be shown on this Web form: one for the main form, and the other for the Iframe containing the report. To prevent this, I have html,body set to overflow:hidden. This works great at preventing the outer scrollbar from showing, and only the report has a scrollbar.
The problem is that the bottom 200px (see first paragraph above) of the report doesnt show and cant be scrolled to. Has anyone come across a solution for this situation?
I'm basically stuck either having a report with two side by side scrollbars, or a report with 1 scrollbar that cuts off the last portion of each page of a report.
View 1 Replies
View Related
Jun 4, 2007
I have a report which I have tested and works fine. now I'm trying to use it as a subreport. the "outer" or main report is very simple: it just has a company standard banner and some header/footer information, and then a single subreport. there is no passing of parameters between main report and sub report. the subreport does have its own parameter to govern its dataset, and provides its own default for that.
The error that I'm getting is this:
[rsErrorExecutingSubreport] An error occurred while executing the subreport €˜subreport1€™: An error has occurred during report processing.
[rsMissingFieldInDataSet] The data set €˜WarrantMasterCube€™ contains a definition for the Field €˜Year€™. This field is missing from the returned result set from the data source.
[rsErrorReadingDataSetField] The data set €˜WarrantMasterCube€™ contains a definition for the Field €˜Year€™. The data extension returned an error during reading the field.
[rsMissingFieldInDataSet] The data set €˜WarrantMasterCube€™ contains a definition for the Field €˜Month€™. This field is missing from the returned result set from the data source.
[rsErrorReadingDataSetField] The data set €˜WarrantMasterCube€™ contains a definition for the Field €˜Month€™. The data extension returned an error during reading the field.
[rsMissingFieldInDataSet] The data set €˜WarrantMasterCube€™ contains a definition for the Field €˜Date€™. This field is missing from the returned result set from the data source.
[rsErrorReadingDataSetField] The data set €˜WarrantMasterCube€™ contains a definition for the Field €˜Date€™. The data extension returned an error during reading the field.
[rsMissingFieldInDataSet] The data set €˜WarrantMasterCube€™ contains a definition for the Field €˜Wt_TO_MTD€™. This field is missing from the returned result set from the data source.
[rsErrorReadingDataSetField] The data set €˜WarrantMasterCube€™ contains a definition for the Field €˜Wt_TO_MTD€™. The data extension returned an error during reading the field.
[rsNone] An error has occurred during report processing.
Of course, this doesn't happen when I execute the subreport by itself. What kinds of things should I be looking at to get to the bottom of this. Thanks!
View 3 Replies
View Related
Oct 23, 2006
works fine in designer but when i load the report services
I get the following error
anybody know what to do
there is one subreport with this report
maybe the passing value but what could be wrong ????
Item has already been added. Key in dictionary: '9' Key being added: '9'
View 2 Replies
View Related
Nov 7, 2007
While exporting a SSRS 2005 report in CSV format ,can we include the report headers and footers also to be exported .
Thanks .
View 1 Replies
View Related
Jul 2, 2007
Hi Anyone,
I have a drilldown report includes three groups. I add the last group for pagination. But the details in each page doesn't accord to I specified and the detail record number is different in different page.
Another issue is the interactive sort always sort in the first page scope. I set the data region or grouping to the table, and evaluate expression scrope to Detail scope.
Anyone has experience on that?
Thanks a lot
View 3 Replies
View Related
Jul 7, 2015
There is a multi value parameter called  "include" in the report where "Allow Multiple Values" is checked and it has 4 Available values as shown in the attached screen shots and preview of the report is also shown .There is no data set for this parameter and the values  will get displayed on the report based on the visibility condition set in the report.Example : If first value  is selected  then 1 is passed and based on the visibility condition set in the report - the report output is displayed.None is default value and has value 4  and when the report is run with this option i.e. "None" then rest three parameter values are not applicable .
Requirement :
-When the end user selects (Select All) Check box then (None)
-check box must be disabled or must not appear for selection for the end user
-When the end user selects check boxes either of the first three except None then also None check box must be disabled or must not appear for -selection for the end user
-when the end user selects a combination of first three then also None check box must be disabled or must not appear for selection for the end user
-The None is set as default with a value as 4 and is applicable only when the user does not select either of the first three values and the report will run.
View 3 Replies
View Related
May 6, 2015
I am exporting SSRS report to Excel I am aware that excel doesn't show footer , It shows in print preview but my footer has text box which have text disclaimer more than 255 characters, the data getting truncated.
View 3 Replies
View Related
May 26, 2006
A simple tabular Report Builder report was written to feed another system that requires quoted CSV. I have two issues when exported:
1) I can't get control over the exported column names. Currently, they are exported as "FIELDNAME_Value".
When I try to change the column headings in the designer, it has no effect on the exported column names
When I create a New Field and specify my desired column name (e.g., COMPANY), the export appears as COMPANY_Value.
How do I control these names for the CSV export?
2) The spec calls for quoted text. In my export, only values with special characters are quoted.
Thanks in advance.
-DRB
View 9 Replies
View Related
Jul 13, 2004
Hi,
I want to check if I have excessive page splitting a for a certain table/index does anyone know if it is possible to monitor page splits for a certain table/index?
Cheers
Jamie
View 2 Replies
View Related
Jul 31, 2002
I have read in a couple of books about overheads when a page split occurs on a heap (a table with no clustered index)
My question is - how (or why) would a page split occur on a heap (as the table is in no particular order)?
View 1 Replies
View Related
Apr 9, 2008
Hi All
I am trying to copy data from one table to another with a conditional split to validate the date.
In my source table, the date field open_date is stored as string YYYYMMDD (19941231) while in my
destination table it is stored as a datetime field.
My source date has bad data in the field, ie invalid dates e.g ( 20012017, 19701043).
I wanted to use a conditional Split to filter records with bad dates into a file
I was looking for a function like ISDATE (open_date) = True then go to table
else put in file. But have not been able to find one.
Or if they is another way to achieve this, I would be interested.
Thanks much in advance
View 5 Replies
View Related
Nov 21, 2007
I have a report that was designed using SQL Reporting Services that sits on a SQL reporting server. It's nothing too exciting, it is essentially a three page application with legal jumbo on pages 2 and 3 and applicant data in fields on page 1.
We use rectangles to force page breaks to page 2 and to page 3.
When running the report on the report server, it shows and prints fine.
When running the report from the QA website internally, it shows and prints just fine.
When running the report from the production website from a machine internally, it shows and prints just fine.
When running the report from outside of the company network, the report is jacked. It obliterates large chunks of text, crams text together, and creates blank pages.
I need help in determining where I even begin with trouble shooting this!
View 1 Replies
View Related
Mar 1, 2006
I have a report with embedded subreports for different departments. When I render a department with short subreports the report exports to PDF fine, but when I have a department with longer subreports then I get an error when exporting. Here is the tail end of the error message in the log file:
inetinfo!library!334!03/01/2006-16:08:30:: i INFO: Call to RenderNext( '/Budgeting/Department_Spending_Report' )
inetinfo!chunks!334!03/01/2006-16:08:30:: i INFO: ### GetReportChunk('RenderingInfo_PDF', 2), chunk was not found! this=a34ae82e-c4b2-4343-be6b-3989db988405
inetinfo!reportrendering!334!03/01/2006-16:08:32:: e ERROR: Throwing Microsoft.ReportingServices.ReportProcessing.WrapperReportRenderingException: Exception of type Microsoft.ReportingServices.ReportRendering.ReportRenderingException was thrown., ;
Info: Microsoft.ReportingServices.ReportProcessing.WrapperReportRenderingException: Exception of type Microsoft.ReportingServices.ReportRendering.ReportRenderingException was thrown. ---> Microsoft.ReportingServices.ReportRendering.ReportRenderingException: Exception of type Microsoft.ReportingServices.ReportRendering.ReportRenderingException was thrown. ---> System.ArgumentOutOfRangeException: Index was out of range. Must be non-negative and less than the size of the collection.
Parameter name: index
at System.Collections.ArrayList.get_Item(Int32 index)
at Microsoft.ReportingServices.Rendering.ImageRenderer.RenderingItemCollection.get_Item(Int32 index)
at Microsoft.ReportingServices.Rendering.ImageRenderer.Table.CalculateItemMeasurement(Orientation orientation, Double childrenMaximumDistance, ReAdjustments itemReAdjustment, ItemContext savedContext)
at Microsoft.ReportingServices.Rendering.ImageRenderer.RenderingItemContainer.CalculatePage(Orientation orientation, Boolean repeatableParent, Boolean canDelete, Double& minimumCoordinate, Double& distance)
at Microsoft.ReportingServices.Rendering.ImageRenderer.RenderingItemContainer.CalculatePage(Orientation orientation, Boolean repeatableParent, Boolean canDelete, Double& minimumCoordinate, Double& distance)
at Microsoft.ReportingServices.Rendering.ImageRenderer.RenderingItemContainer.CalculatePage(Orientation orientation, Boolean repeatableParent, Boolean canDelete, Double& minimumCoordinate, Double& distance)
at Microsoft.ReportingServices.Rendering.ImageRenderer.RenderingItemContainer.CalculatePage(Orientation orientation, Boolean repeatableParent, Boolean canDelete, Double& minimumCoordinate, Double& distance)
at Microsoft.ReportingServices.Rendering.ImageRenderer.RenderingItemContainer.CalculatePage(Orientation orientation, Boolean repeatableParent, Boolean canDelete, Double& minimumCoordinate, Double& distance)
at Microsoft.ReportingServices.Rendering.ImageRenderer.RenderingItemContainer.CalculatePage(Orientation orientation, Boolean repeatableParent, Boolean canDelete, Double& minimumCoordinate, Double& distance)
at Microsoft.ReportingServices.Rendering.ImageRenderer.RenderingItemContainer.CalculatePage(Orientation orientation, Boolean repeatableParent, Boolean canDelete, Double& minimumCoordinate, Double& distance)
at Microsoft.ReportingServices.Rendering.ImageRenderer.RenderingItemContainer.CalculatePage(Orientation orientation, Boolean repeatableParent, Boolean canDelete, Double& minimumCoordinate, Double& distance)
at Microsoft.ReportingServices.Rendering.ImageRenderer.ImageRendererBase.ProcessPages(CompositionBase theComposition, Report theReport, Boolean needTotalPages, Int32 startPage, Int32 endPage, Boolean render)
at Microsoft.ReportingServices.Rendering.ImageRenderer.PdfReport.RenderReport(Report report, NameValueCollection deviceInfo, EvaluateHeaderFooterExpressions evaluateHeaderFooterExpressions, CreateAndRegisterStream createAndRegisterStreamCallback)
at Microsoft.ReportingServices.Rendering.ImageRenderer.ImageRendererBase.Render(Report report, NameValueCollection reportServerParameters, NameValueCollection deviceInfo, NameValueCollection clientCapabilities, EvaluateHeaderFooterExpressions evaluateHeaderFooterExpressions, CreateAndRegisterStream createAndRegisterStream)
--- End of inner exception stack trace ---
at Microsoft.ReportingServices.Rendering.ImageRenderer.ImageRendererBase.Render(Report report, NameValueCollection reportServerParameters, NameValueCollection deviceInfo, NameValueCollection clientCapabilities, EvaluateHeaderFooterExpressions evaluateHeaderFooterExpressions, CreateAndRegisterStream createAndRegisterStream)
at Microsoft.ReportingServices.ReportProcessing.ReportProcessing.RenderSnapshot(CreateReportChunk createChunkCallback, RenderingContext rc, GetResource getResourceCallback)
--- End of inner exception stack trace ---
inetinfo!webserver!334!03/01/2006-16:08:32:: e ERROR: Reporting Services error Microsoft.ReportingServices.ReportProcessing.WrapperReportRenderingException: Exception of type Microsoft.ReportingServices.ReportRendering.ReportRenderingException was thrown. ---> Microsoft.ReportingServices.ReportRendering.ReportRenderingException: Exception of type Microsoft.ReportingServices.ReportRendering.ReportRenderingException was thrown. ---> System.ArgumentOutOfRangeException: Index was out of range. Must be non-negative and less than the size of the collection.
Parameter name: index
I'm running Reporting Services SP2. I've searched other postings and I can't seem to find anyone else with the same issue. I'm able to export to excel with no problem.
Any help would be appreciated.
Thank You.
View 2 Replies
View Related
Dec 12, 2007
Hi Recently we upgraded to SQL 2005 SP2 from SQL 2005. However a problem I am noticing is on Windows 2000 machines, the report name doesn't automatically pass the save as dialog box. Anybody else get this problem or know how to fix it?
The default value in the save as dialog box is Reserved.ReportViewerWebControl. Also when I click export and I'm given the option to open/save the file, the file name is Reserved.ReportViewerWebControl.axd
View 2 Replies
View Related
Mar 28, 2007
Is it possile for a report to be exported to multiple PDF files, each pdf file would be for a group in the report and would ideally use field information for the group to construct the pdf filename?
The purpose of this is to provide a separate PDF for access over the web, so for example we have a scheduled report that generates a report grouped by sales region we would end up with SalesRegionA.PDF, SalesRegionB.PDF etc.
View 2 Replies
View Related
