this.reportViewer1.ServerReport.ReportServerUrl = new Uri("http://localhost/ReportServer");
this.reportViewer1.ServerReport.ReportPath = "/Import Run Reports/ImportRunReport";
Microsoft.Reporting.WinForms.ReportParameter[] param = new Microsoft.Reporting.WinForms.ReportParameter[2];param[0] = new Microsoft.Reporting.WinForms.ReportParameter("RunId", "195900,195904,195711,195707");param[1] = new Microsoft.Reporting.WinForms.ReportParameter("ReportType", "Summary");
reportViewer1.ServerReport.SetParameters(param);
reportViewer1.RefreshReport();
}
Very first time the Report is opening successfully. Once I close the window and again i am trying to open the report i am getting the following error "The underlying connection was closed: A connection that was expected to be kept alive was closed by the server."
Could you Please help me in this regard.
This used to work just fine until about a week ago. We're not sure if there was a MS update that caused this behavior. If the user saves the report to a local disk instead of opening it, they can save it successfully and open it later.
Is there a way to render the PDF report in the same broswer window you just called it from without the Open/Save dialog box coming up. The report is being call directly by URL parameters for PDF format
How to correctly open Multidimensional Model in SSAS to Excel Power View Report? I am continuously getting this error message when open with Power View Report.
"Sorry, something went wrong while loading the model for the item or data source 'PC01-4300095 Sales Cube'. Verify that the connection information is correct and that you have permissions to access the data source."
I am generating a Report by using SSRS. I am making using use of SSRS Report Viewer control for displaying the report. Which has an option to export the generated report in PDF format. Instead of displaying the report in by using report viewer I want to generate it directly in PDF format whenever that report is selected from the list of reports. So is there is any way to generate the report directly in PDF format which prompt a pop up for opening or saving the PDF?
I have a requirement to display a disclaimer message before going to the content of a particular report. The workflow would be:
go to report folder e.g. Reports/Pages/Folder.aspx?ItemPath=%2fMyFolder%2fReports&ViewMode=ListClick on Report xDisplay DisclaimerPress 'ok' on disclaimerContinue to report
This is SSRS 2012 native.
I had contemplated injecting JavaScript into the report, but this appears virtually impossible to do i a simple manner.
I am trying to create a calendar style report that will have 12 months (as columns) and store opening listing in rows. I have created a matrix, but the problem that I have is that the store opening listing displays in the right period, but they are not in any order. I would like to have the openings always on top, right under the header in the matrix. Now I have them scattered randomly all over the matrix. I tried numerous way of sorting and that does not work.
I am attaching a sample of what I would like to accomplish (months are columns).
I’m trying to follow the article http://aspnet.4guysfromrolla.com/articles/031506-1.aspx. It gives a sample to download at the bottom which I did. I’m trying to take a look at the Stored Proc that were created in the PagingData.mdf. The only thing included in the App_Data folder is PagingData.mdf file. How can I open the DB or attach it to my SQL2005 server? There is no .ldf file included in the sample so the attaching is failing.
I used to use rdo in VB6 and now I'm trying to figure out how to use the SqlDataReader class in VB.NET. I want to use an ODBC data source to specify the connection info. I used to give the rdoConnection object a connect string that looked something like this:"DSN=[data source name];UID=[sql server user];PWD=[pwd]"I don't understand the connect string given in all the examples I've found (nor does it seem to work on my system...) mySqlConnection = New SqlConnection("server=(local)VSdotNET;Trusted_Connection=yes;database=northwind")Does anyone have any ideas? I'm open to explanations as well as solutions :)Thanks,jdm
I got a .dts package via email. But I am not able to open it in my sql server. Could some one pls help me know, how to open .dts packeges in the designer.
All I want to do is open an .mdf file. So I have downloaded and installed SQL Server 2005 Express Edition. I have searched HELP but I see nothing simple. How do I add a file to this server so that I can read the file in Access? Thank you very much for any help you can give. David Thomas
Hi, I have a client who has a current website based on an MS SQL database. I am building a new website that will be in MySQL.
I have never used MSSQL before and the only information that i have been sent by the old web designer is a .bak file (which is the latest back-up of the MS SQL info) and the user name and password for the current on-line databases.
I dont know how to open this .bak file, ideally i would like to get it into MS excel or MS access. I have downloaded SQL Server Management Studio Express and SQL Server Configuration Manager but i dont know what to do next (and am really confused!)
Can anyone advise me of the steps that i need to take to get the data out of the .bak file?
Hello Guys, One of the fields in my report is a web address (i.e. http://www.yahoo.com). Navigation property for this field is "Jump to URL". Users will access the report with a browser, using a "sharepoint-like" application. Default behavior of "Jump to URL" seems to be to open the link in the same window (or tab in IE7). Is there a way to force the link to be open in the new window?? Please let me know if you have any suggestions. Thanks!!
Im using Sql server 2000. I wanted to know if its possible to open a cursor using an sp instead of an sqlstatement?
Also I know that cursors cant be opened for more than one result sets. This question is based on the assumption that the SP will return only one result set.
If possible please let me know the syntax/reference link.
Now I have the execute selectquerry function..... public static SqlDataReader ExecuteSelectQuerry(string querry) { try { SqlConnection conn = OpenConnection(); SqlCommand scomm = new SqlCommand(querry, conn); SqlDataReader sdr = scomm.ExecuteReader(); return sdr;
} catch (Exception e) { return null; } }}
now my question is....the instance of conn is limited only to that function only, and not returned outside. Whereas only the SqlDataReader is returned outside. Does that have any abnormal affect on the application. Since my ASP Application is getting locked (not doing anything, nt even post back!) sometimes after a few DB operation.
Arent these connections and instances Managed (auto garabage collection)?? Can memory leaks under such a situation occur. Please help
I have created my query to do what it needs to do but i'm getting error when i click the button, it says there is an error opening my connectiong.... I.E. Login failed for user '(null)'. Reason: Not associated with a trusted SQL Server connection. Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code. Exception Details: System.Data.SqlClient.SqlException: Login failed for user '(null)'. Reason: Not associated with a trusted SQL Server connection.Source Error:
Line 28: Line 29: //open the connection Line 30: myConnection.Open(); Line 31: Line 32: //create a commandSource File: c:Documents and SettingsplanPlanDatabaseBZAvuAdd.aspx.cs Line: 30 Stack Trace:
Hello, I put my stored procedure in my class and try to execute it but get this error 1st here is my class 1 public signup_data_entry() 2 { 3 SqlConnection con = new SqlConnection("cellulant_ConnectionString"); 4 5 6 SqlCommand command = new SqlCommand("Cellulant_Users_registration", con); 7 command.CommandType = CommandType.StoredProcedure; 8 9 con.open(); 10 11 command.Parameters.Add(new SqlParameter("@RegionID", SqlDbType.Int, 0, "RegionID")); 12 command.Parameters.Add(new SqlParameter("@RegionDescription", SqlDbType.NChar, 50, "RegionDescription")); 13 14 command.Parameters[0].Value = 4; 15 command.Parameters[1].Value = "SouthEast"; 16 17 int i = command.ExecuteNonQuery(); 18 19 20 }
and here is the error message on the testing server. Error line is line 27 below
Source Error:
Line 25: command.CommandType = CommandType.StoredProcedure; Line 26: Error >>> Line 27: con.open(); Line 28: Line 29: command.Parameters.Add(new SqlParameter("@RegionID", SqlDbType.Int, 0, "RegionID"));
Hi most of my code follows the following format in a lot of my pages, my question is; Am i approaching it the right way in terms of performance, sql injection attacks and anything someone more knowledgeable than myself can think off, please feel free to criticise the code. Thank youprotected void Page_Load(object sender, EventArgs e) {string strID = Request.QueryString["id"]; SqlConnection conn = new SqlConnection(ConfigurationManager.ConnectionStrings["streamConnectionString"].ConnectionString);SqlCommand command = new SqlCommand("stream_EventsByID", conn); command.CommandType = CommandType.StoredProcedure;command.Parameters.Add("@eventID", SqlDbType.Int).Value = Request.QueryString["id"]; conn.Open(); SqlDataReader reader = command.ExecuteReader(CommandBehavior.CloseConnection); eventList.DataSource = reader; eventList.DataBind(); conn.Close(); } }
I Have A Problem With Opening A Database With "SQLOLEDB" Provider In Web Application Projects! The Same Database Opens In Windows Application Projects But When I Try TO Open It (Manually Or During A DataAdapter.Fill Method) In Web APPS I Get An Error Message : "Login failed for user 'NT AUTHORITYNETWORK SERVICE'." I Use Windows NT Authentication In Connections, I Have SQL Server 2000 Enterprise Edition (With Default Installation) , Windows .Net Server 2003 Enterprise Edition (IIS 6) , And VS.NET 2003 Enterprise Edition (.Net Framework 1.1) Can Anyone Tell Me What's Wrong?
Hi,I am getting this error when i am connecting sql database.Error = "SQL Server does not exist or access denied."Can you please suggest me where i am going wrong.RegardsNaveen
If Someone could please show me some example VB code where i can open the my Sqlconnection in the Page_Load subroutien... and then close that SqlConnection in the Page_Unload routine. I want to be able to execute Sql command without having to re-open and re-close the connection.
When using Enterprise Manager, Right Clicking on any table in the db, selecting OPEN TABLE, and choosing either Return all rows or Return Top... I recieve this error "The query cannot be executed because some files are missing or not registered. Run setup again to make sure the required files are registered."
I am running: SQL Server 7.0 Client with Windows 2000.
I have run setup again and the same thing still happenes. I even uninstalled and reinstalled SQL Server, still the same thing occures.
I first installed SQL Server7.0 on my machine about a month and a half ago and all was fine until two weeks ago, then this started happening. SQL Server was the last thing I have installed on this machine so it cannot be a new install conflict. I can't think of any reason for this to be happening out of the blue like it did.
My client has given me a DB file (.MDF) and I need to open it in order to export it to the remote DB. In Enterprise Manager I go to 'New Database' - create a new DB and click on the 'Data' tab to browse to my clients file. Enterprise Manager recognises the file and everything seems hunky dory. but the resulting DB seems to have no tables. The DB file is 1600K and has some stored procedures but if I try to export the tables there is nothing. His ASP files refer to tables in the SQL as you would expect. Am I missing something? it's the weekend so he is not available and I don't want to look tooo stupid!
I am having one problem about the processing cube in SQL 2005 AS. when cube runs i get this error in log file:
File system error: Error opening file; Program Files (x86)Microsoft SQL Server90SharedASConfigmsmdredir.ini is not a disk file or file is not accessible.
I have a single .asp page that opens a connection and then sequentiallyopens and closes 14 recordsets from stored procedures to obtain variousproduct information before closing the connection.Is it common practice to do something like this? Or is opening 14recordsets going to become a real problem when the page goes live and startsgetting high web traffic?Thank you in advance for any information you might provide.Dave
I have areport with a text box. The text box is hyperlinked to another report url. The report opens in a new page when previewed with RS 2005 but when deployed the report opens in teh same page from where it is referenced.
How can I set a property with the texbox to always open in a new page the hyperlinked report.
Could not allocate ancillary table for view or function resolution
When I try to open a view that has never had a problem before today. I called Microsoft support and got a hot fix sent to me but unfortunatly it didnt install at all. I get an error:
You do not have any instance of SQL installed on this computer that qualifies for this hotfix. Please check version and service pack requirements for this hotfix
And according to KB articles this problem should have been fixed by SP4 (which I have). So I dont know what to do. Could someone please help me??
Hello, I have a question and hope that someone can help me. I use of AccountView application this application use of the Microsoft Visual FoxPro database. We have on another server Sql-server. Me question is how I am possible foxpro and Sql-server to each other cross-belt Len (linken) Or can I import the database from foxpro in sql-server?
I have created an SQL Server Report with a table of data on Invoices. Each invoice should be clickable so that it will open in CRM. From the documentation I have read online, it seems like I need to create a report parameter called CRM_URL and add this in the Action property of the appropriate table cell:
When I do that, I get an error message saying:An attempt was made to set a report parameter 'ID' that is not defined in this report. (rsUnknownReportParameter)
This happens both if I select a particular Invoice ID or simply hard code a known entry from the database. The OTC code is correct.
Any suggestions as to where I might be going wrong?
Document contains one or more extremely long lines of text. These lines will cause the editor to respond slowly when you open the file. Do you still want to open the file? on every file containing a Script Component? I've got a project with about 21 packages, ~ 3/4 of them having multiple Script Components and every single one of them makes me click through the warning dialouge to open the file. That means simply opening the project takes about three minutes and almost complete attention through the entire process. Builds offer the same headache since the creation of a Deployment utility inexplicably requires every file in the project be open. As far as I can tell, the warning is a result of Script Components being included in the .dtsx file as a pre-compiled binary. I didn't specifically ask for the binary to be included in the file, so why would the standard behaviour raise a warning dialouge by default? Please tell me I'm doing something wrong.
