ReportViewer (WinFprms) View Reoprt Button
Feb 8, 2007
I'm using the ReportViewer winforms control. It works great except for one annoying issue. The "View report" button shown to the right of the parameters for the report is rendered too far to the right. So when my application is running in 1024*768, the button is rendered outside the visible area.
It doesn't seem to make any difference if I have one or several parameters, the problem remains.
Is there any way of controlling the renderingposition of that button?
Regards Andreas
View 4 Replies
ADVERTISEMENT
Jan 31, 2011
We recently upgraded from ReportViewer 9.0 to 10.0 Control in our ASP.NET application, and face some strange issues after the upgrade. When we press the Back button to go to a page that was rendering a report with one or more single-select drop down lists, the selected index in the drop down is reduced by 1, and the report doesn't render until I press "View Report". I verified that exact same setup works well with ReportViewer 9.0.
View 2 Replies
View Related
Sep 27, 2007
Dear Friends,
I am facing the following issue in SSRS:
Problem:
When SSRS report is viewed in Reportviewer control in FIREFOX browser, then Print,Zoom and Search tool bar icons are not displayed.
The same problem is also seen, when SSRS report is viewed using URL in Firefox browser.
Description:
When SSRS report is viewed using reportviewer control in IE browser, then All tool bar icons are displayed.
Following are the Toolbar icons displayed:
1. Search.
2. Next Prev Button
3. Print
4. Zoom
5. Export
But, when the same SSRS report is viewed using Reportviewer control in Firefox browser, then following toolbar icons are not displayed:
1. Print
2. Zoom
3. Search
I would appreciate any pointers to resolve this issue.
Thanks,
S Suresh
View 1 Replies
View Related
Sep 27, 2007
Dear Friends,
I am facing the following issue in SSRS:
Problem:
When SSRS report is viewed in Reportviewer control in FIREFOX browser, then Print,Zoom and Search tool bar icons are not displayed.
The same problem is also seen, when SSRS report is viewed using URL in Firefox browser.
Description:
When SSRS report is viewed using reportviewer control in IE browser, then All tool bar icons are displayed.
Following are the Toolbar icons displayed:
1. Search.
2. Next Prev Button
3. Print
4. Zoom
5. Export
But, when the same SSRS report is viewed using Reportviewer control in Firefox browser, then following toolbar icons are not displayed:
1. Print
2. Zoom
3. Search
I would appreciate any pointers to resolve this issue.
Thanks,
kk
View 5 Replies
View Related
Feb 27, 2008
The "View Report" button is relatively positioned so when the report content is wider than the screen size, it pushes it to the right such that the users have to scrool right to click on it again. Is there a way of setting the "View Report" button to a fixed position to eliminate this?
View 1 Replies
View Related
Apr 3, 2007
I want to validate my input report parameters while user clicks the View Report Button. How can I accompalish this in SSRS.
ex: Report parameters should accept only numberic values.
View 4 Replies
View Related
Jun 12, 2008
Hi.
My company has upgraded some of the database systems to SQL 2005 while other have a fresh install.
The problem we're seeing is that the view button located in the Advanced section of the steps in the Job properties windows is greyed out. The path is valid as we can copy the path and paste it at the run command and view the log.
Does anyone know how this problem can be resolved? If we select to log the results to a table; we have access to the corresponding view button but not the one for the file system logging.
We rely heavily on this feature since we used it often under SQL 2K. Can anyone provide any helpful details to resolve this or has anyone seen this problem before???
Any helpful replies would be highly appreciated.
Thanks!
View 6 Replies
View Related
Sep 14, 2015
Is there a way to make the View Report disabled or enabled if certain condition exists?
View 3 Replies
View Related
Oct 19, 2015
I am working with vs2013 and have developed ssrs report in ssdt that creates RDL files, I want to view this report in asp.net web page using vs 2013 Reportviewer control. How do I do that? What are the proper steps to configure reportviewer control.so I can view ssrs report through vs2013 ultimate edition.
View 2 Replies
View Related
Jan 3, 2008
Has anyone encounted a problem with Reporting Services (2005) with the following scenario:
A report with a dropdown parameter allowing a Select All choice -
If the selection list is fairly long and Select All is selected - if the user clicks the View Report button the selection list is completely reset (i.e. all items are unselected). This seems to happen if the user quickly clicks the View Report button immediately after clicking the Select All box on the parameter dropdown.
This happens inconsistently - some users experience it frequently while others do not see it at all (using the same parameter values, etc.)
View 1 Replies
View Related
Nov 3, 2015
I have several reports in a Power View Gallery. In Gallery view, most of the reports show the "Open New Excel Workbook", the "Create Power View Report", and the "Manage Data Refresh" buttons on the right side of the report list. Why would some reports not have these buttons available? In the attached image you can see one report with the buttons and one without the buttons.
View 5 Replies
View Related
Oct 25, 2007
I have some date criterias on my report that default and so I would like for the report not to display until the user clicks on the "view report" button.
Also, I would like to trap that button to send my own internal parameters to the report. How and where would I do that.
I'm running the report through report viewer and I have a subroutine that would refresh the report with my desired internal parameters. I just need to hook it up.
Thanks for any help or information.
View 2 Replies
View Related
Jul 26, 2007
I've got a SQL Reporting Server 2000 SP2 report that takes 3 parameters. FromDT, ToDT, and LocationCD. The first two parameters are free form text fields that expect a date. The last one is a drop down box. For some reason, when I'm viewing the report through the standard reports folder on the report server I have to click the "View Report" button two times to get the report to render. Clicking it just once, doesn't seem to do anything. The report is a line graph.
There are default values in the FromDT and ToDT parameter fields.
Anyone have any ideas what would be causing the need for the second click?
View 2 Replies
View Related
Mar 7, 2008
Hey Guys,
I'm not sure if anyone can help me with this but I am trying to achieve the following:
I have a row (In this case it is information on a fix) and on a button click I am trying to get it to "archive" it. At the moment I have it so that it it takes the current information and adds it to the archive table adding an archive date. The thing that I am struggling with is incrementing the version number. So, I need it to (in these steps I think) - Look for existance of the other entires of that ID, look for the version number that is related to the newest date of those knowledgeIDs and then add 1 to it. If that knowledgeID doesnt exist then add it as one.
My current code is below:
Thanks in Advance =)
C# Codeprotected void Page_Load(object sender, EventArgs e)
{UserName = (string)Session["UserName"];
Label4.Text = UserName + " Is Current Logged In";UserType = (string)Session["UserType"];if ((Session["UserName"] != null) & (UserType == "Helpdesk"))
{Response.Redirect("Accessrights.aspx");
}else if (Session["UserName"] == null)
{Response.Redirect("Login.aspx");
}
FixName = "default";Description = "default";File = "default";
ADate = myCalendar.TodaysDate.ToShortDateString();
AddDate = Convert.ToDateTime(ADate);myConnectionString = "Data Source=.\SQLEXPRESS;AttachDbFilename=C:\inetpub\wwwroot\HOF\App_Data\HOF.mdf;Integrated Security=True;Connect Timeout=30;User Instance=True;";
}protected void Button1_Click(object sender, EventArgs e)
{SqlConnection myConnection = new SqlConnection(myConnectionString);
try
{
FixName = TextBox1.Text;
SqlCommand myCommand = new SqlCommand("select * from Knowledge WHERE FixName like '%" + FixName + "%'", myConnection);
myConnection.Open();SqlDataReader myReader = myCommand.ExecuteReader();if (myReader.HasRows)
{while (myReader.Read())
{
TextBox1.Text = myReader["FixName"].ToString();TextBox2.Text = myReader["Description"].ToString();
File = myReader["Location"].ToString();if (File != null)
{
TextBox3.Text = File;
}
else
{TextBox3.Text = "There is no script avaliable";
}KnowledgeID = myReader["KnowledgeID"].ToString();Add = myReader["DateAdded"].ToString();
}
myConnection.Close();
}
else
{TextBox1.Text = FixName + "Does not Exist. Please try again.";
}
}catch (Exception ex)
{
myConnection.Close();
}
try
Description = TextBox2.Text;File = Convert.ToString(FileUpload1.FileName);if (CheckBox1.Checked == true)
{SAPPS = "True";
}
else
{SAPPS = "False";
}
{SqlCommand mycommand2 = new SqlCommand("INSERT INTO Knowledge (FixName, Description, Location, DateAdded, DateArchived, Version, KnowledgeID) SET ('" + FixName + "','" + Description + "','" + File + "','" + Add + "','"+AddDate+"','" + SAPPS + "','"+I NEED A VALUE HERE+"','"+KnowledgeID+"')", myConnection);SqlDataAdapter myDataAdapter = new SqlDataAdapter(mycommand2);
sa = mycommand.ExecuteNonQuery();
myConnection.Close();
}catch (Exception ex)
{
myConnection.Close();
}
}
View 2 Replies
View Related
Sep 24, 2004
I need to make a query to a SQLserver db passing values from a dropdownlist and two text boxes as my criteria. Now if nothing is selected and the button is pressed, I would like to return everything that is part of my Select statement. I am having trouble making my sql statement work.
Im sending you my code as an attachment. I've put * around the area i really need help with.
Even if you could just point me in the right direction as to where to look for a good web forms book using VB.NET and ASP.NET I would really appreciate it.
Thanks,
Jose
AIM- RangerBud249
Yahoo- RangerBud249
Imports System.Data.OLEDB
Imports System.Data
Imports System.Data.SqlClient
Public Class Test
Inherits System.Web.UI.Page
Public dbConn As SqlConnection
Public da As SqlDataAdapter
Protected WithEvents txtStart As System.Web.UI.WebControls.TextBox
Protected WithEvents txtEnd As System.Web.UI.WebControls.TextBox
Protected WithEvents Calendar1 As System.Web.UI.WebControls.Calendar
Protected WithEvents Label1 As System.Web.UI.WebControls.Label
Protected WithEvents img_cal1 As System.Web.UI.WebControls.ImageButton
Protected WithEvents img_cal2 As System.Web.UI.WebControls.ImageButton
Public ds As DataSet
Private Sub Page_Load(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles MyBase.Load
'the TailNumber is the first thing that will load
If Not Page.IsPostBack Then
lstAircraft.DataSource = GetAircraft() 'this function will load the Tail Numbers
lstAircraft.DataValueField = "TailNumber"
lstAircraft.DataTextField = "TailNumber"
lstAircraft.DataBind()
End If
End Sub
Function GetAircraft() As System.Data.DataSet
'this function will load the Tail Numbers
Dim connectionString As String = "connection info"
Dim dbConnection As System.Data.IDbConnection = New System.Data.SqlClient.SqlConnection(connectionString)
Dim queryString As String = "SELECT [Aircraft].[TailNumber] FROM [Aircraft]"
Dim dbCommand As System.Data.IDbCommand = New System.Data.SqlClient.SqlCommand
dbCommand.CommandText = queryString
dbCommand.Connection = dbConnection
Dim dataAdapter As System.Data.IDbDataAdapter = New System.Data.SqlClient.SqlDataAdapter
dataAdapter.SelectCommand = dbCommand
Dim dataSet As System.Data.DataSet = New System.Data.DataSet
dataAdapter.Fill(dataSet)
Return dataSet
End Function
******************************************************************************************************************
this is the area I really need help with
Sub btm_Submit_Click(ByVal sender As Object, ByVal e As EventArgs)
Dim connectionString As String = "connection info"
Dim dbConnection As System.Data.IDbConnection = New System.Data.SqlClient.SqlConnection(connectionString)
dbConnection.Open()
dbConnection.Close()
Dim selection As String
Dim startTime As String
Dim landingTime As String
Dim flights As String
Dim selString As String = "SSELECT AircraftID, fromLocation, startTime, toLocation, landingTime, ID, Filename, VSU, local_1 FROM Flights, tbl_FileNames, tbl_VSU"
Dim commandString As String = "SELECT [Flights].AircraftID, [Flights].fromLocation, [Flights].startTime, [Flights].toLocation, [Flights].landingTime, [tbl_FileNames].ID, [tbl_FileNames].Filename, [tbl_FileNames].VSU, [tbl_FileNames].local_1 FROM Flights, tbl_FileNames, tbl_VSU"
selection = "where " & Me.lstAircraft.SelectedValue.ToString & " " & startTime = Me.txtStart.Text & " " & Me.txtEnd.Text = landingTime & " " & [Flights].[ID] = [tbl_VSU].[flight_id]) AND [tbl_VSU].[filename_id] = [tbl_FileNames].[ID]"
If Me.txtStart.Text <> "" Then
selString = selString & selection
End If
Session("SelStr") = selString
Dim dbCommand As New OleDbCommand(commandString, dbConnection)
DataGrid1.DataSource = GetFlights(lstAircraft.SelectedValue)
DataGrid1.DataBind()
End Sub
*********************************************************************************************************************
Function GetFlights(ByVal ID As Integer) As System.Data.DataSet
Dim connectionString As String = "connection info"
Dim dbConnection As System.Data.IDbConnection = New System.Data.SqlClient.SqlConnection(connectionString)
Dim queryString As String = "SELECT [Flights].[toLocation], [Flights].[startTime], [tbl_FileNames].[ID], [Flig" & _
"hts].[fromLocation], [tbl_FileNames].[filename], [tbl_FileNames].[Local_1], [Fli" & _
"ghts].[AircraftID], [Flights].[landingTime], [tbl_FileNames].[VSU] FROM [Flights" & _
"], [tbl_FileNames], [tbl_VSU] WHERE (([Flights].[ID] = [tbl_VSU].[flight_id]) AN" & _
"D ([tbl_VSU].[filename_id] = [tbl_FileNames].[ID]))"
Dim dbCommand As System.Data.IDbCommand = New System.Data.SqlClient.SqlCommand
dbCommand.CommandText = queryString
dbCommand.Connection = dbConnection
Dim dataAdapter As System.Data.IDbDataAdapter = New System.Data.SqlClient.SqlDataAdapter
dataAdapter.SelectCommand = dbCommand
Dim dataSet As System.Data.DataSet = New System.Data.DataSet
dataAdapter.Fill(dataSet)
Return dataSet
End Function
Private Sub img_cal1_Click(ByVal sender As System.Object, ByVal e As System.Web.UI.ImageClickEventArgs) Handles img_cal1.Click
'this will make the calendar for start visible when clicked and not visible if clicked again
Session("Cal1") = True
Session("Cal2") = False
Me.Calendar1.Visible = True
End Sub
Private Sub img_cal2_Click(ByVal sender As System.Object, ByVal e As System.Web.UI.ImageClickEventArgs) Handles img_cal2.Click
'this will make the calendar for end visible when clicked and not visible if clicked again
Session("Cal2") = True
Session("Cal1") = False
Me.Calendar1.Visible = True
End Sub
Private Sub Calendar1_SelectionChanged(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles Calendar1.SelectionChanged
'this will put the date selected in my text box as a short date
If Session("Cal1") = True Then
txtStart.Text = Calendar1.SelectedDate.ToShortDateString
Session("Cal1") = False
ElseIf Session("Cal2") = True Then
txtEnd.Text = Calendar1.SelectedDate.ToShortDateString
Session("Cal2") = False
End If
Me.Calendar1.Visible = False
End Sub
End Class
View 1 Replies
View Related
Jun 2, 2008
Hello.
When I'm useing a report in reportViewer I have a "back button" in the the viewer which let me go back to my parent report after jumping to another report.
I wanted to make a bigger button like that on the report so I tried to simulate it by creating my own textback and use a javascript to go back one page.
This doesn't work since the javascript doesn't work as well as the built in bottun.
Is there a way to simulate this button any way?
Thanks.
View 2 Replies
View Related
Jan 30, 2008
I just installed and registered SQL Server Express but I don't see any shortcuts or Start -> Programs links. I found the new folder it created C:Program FilesMicrosoft SQL ServerMSSQL.2 and I tried to run this file:
C:Program FilesMicrosoft SQL ServerMSSQL.2MSSQLBinnsqlservr.exe
Nothing happens. Nada. Do I have to restart my computer?
PS: Is there a QuickStart tutorial on using its Reporting Services?
View 5 Replies
View Related
Oct 15, 2007
Hi everyone, Im using SSRS 2000 and I was wondering is there a way to create a click button??? I have 2 reports linked with hyperlinks but I wanted to make it look more presentable. So, instead of just clicking on the words, I want them to click the button.
Thanks in advance,
Abner
View 3 Replies
View Related
Feb 1, 2006
Print button is disabled for some users. Don't know why it is doing so? Works fine for most of the users in the same group.
Any help is much appreciated.
SQL SERVER Reporting Services 2000
Win XP
View 10 Replies
View Related
Dec 27, 2006
Hi,
I have one report,in my report i need to display parameters like this:
one radio button :Age and another radio button is Age Ranges
For the Age,I have to dispaly like two text boxes named 'From' and 'To'
For the Age Ranges,I have to display one drop down list contains values :20s,30s ..
In Reporting Services,Putting the Radio button is not possible,i think,If possible how to achive this.
Other workaround is i think Multivalued parameter which displays the Age and Age ranges
When we click on Age we need to display 2 textboxes
When we select Age Ranges we have to display Drop down list
If we select both :both 2 text boxes and drop down list.
Putting multi valued parameters for this requirement is not good and this is not the multi valued parameter concept.Please clarify me whether iam correct or not.
Thanks in advance
View 5 Replies
View Related
Aug 8, 2006
I have a web application with a stand alone report. When I put the ReportViewer in the webform I can see every reports in the project. The problem is that I can't see the print report button...
If I indicate that the report is a "Server Report" instead a local report the Print Report appear, but a need a "Local Report" not a "Server Report" How can i solve that.
Thank you.
View 3 Replies
View Related
Apr 14, 2008
Hi There,
I wanted to add a search button to my report where by it would only be visible after the report was run by the user and then the user could search on a particular field(Called Synopsis) for a value, ex QREF12345. I don't want the user to enter QREF, just the number. How could this be coded?? Also, are there any good sites available with code snippetts available?
Thanks,
Rhonda
View 1 Replies
View Related
Nov 15, 2006
I want a reset-button which clear my formular....
I have the following code in mypage.aspx.vb:
Sub Reset(ByVal sender As Object, ByVal e As System.EventArgs)
Me.Server.Transfer("Mypage.aspx") 'reloads the page without postback?
End Sub
And a button on mypage.aspx:
<asp:Button ID="Button2" OnClick="Reset" runat="server" Text="Rensa" />
But when I click the button....the validation-controls executes before...so instead for "clearing" the page (reload it without postback) the validation-messages shows that I have forgott to write in som textboxes....
What should I do?
View 1 Replies
View Related
Sep 29, 2005
I am trying to get MSSQL Reporting Services working. I have used it before, but now I have the opportunity to get the software entrenched in my organization. I installed the app and it opens up, but when I try to create a new folder the software will not allow the OK choice. I can cancel, but I need to choose OK.
View 16 Replies
View Related
Sep 21, 2007
Is that possible to use report viewer without any other application as like we design normal rdl reports in Report designer.
View 2 Replies
View Related
Feb 17, 2006
Hi all,
I'm creating a custom interface for reporting services but I am having a few problems. This is my environment:
Using the ReportViewer component in remote mode to show my reports of the report server. There are 2 user levels of which any user can be apart of, Admin & user. In every report, there is a parameter called MERCHANTID, when the user who logs in (via custom login interface) is of group admin, then the merchantid parameter gets prompted before the report is run, if the group of the user is "user" then the merchantid parameter is hidden, and is passed programatically to the report. The report path also
My Questions:
1. When my reportviewer component loads up the report and prompts for a parameter, when you select a parameter value or type it in, it just posts back with no results, just the parameter prompt again with no data... How can this be corrected?
2. How do I pass report parameters programatically... so that when my user id of group "user" then "merchantid" gets passed automatically, but if there is any more parameters, then that gets prompted...
Thanks for your help.
View 11 Replies
View Related
Aug 27, 2007
hi to one and all ,
i've installed the SSRS 2000 ENT Edition i trying to add reportviewer dll in my webapplication but i haven't find that dll so could any help in this issue ?
Thanks in Advance
by,
Veera Vinod.
View 6 Replies
View Related
Feb 21, 2006
Hello,
I try to embed my Reports of Reporting Services to ASP .NET Application. I use ReportViewer component of Visual Studio 2005.
When I try to set Height property to 100% there is no report content shown. I tried to set SizeToReportContent property but there wasn't success.
At the same time when I set Height to any particular value e.g. 400px, everything is OK. But of cousre I can't know particular height for every reports.
Did you have any such problems? Can you help me?
Thank you,
View 20 Replies
View Related
Jan 8, 2007
Does anybody know how to get Reportviewer 2005 working on .Net 2003 web application?
View 3 Replies
View Related
Dec 21, 2006
I have a Local report bound to a ReportViewer control and when I am typing in text in the find text box and I click find I get this message on the report viewer "Object reference not set to an instance of an object" anybody have any idea
View 1 Replies
View Related
Aug 12, 2007
I am using the reportview in vb2005 to run a report that is on our report server. It just keeps says its processing and does not come up with any results. Any thoughts why this is happening and how I can fix?
View 3 Replies
View Related
Mar 2, 2007
I have read a million documents on this question and I still don't get it. I would greatly appreciate any insights.
I start a new WebSite. I put these specs in web.config:
<authentication mode="Windows"/>
<identity impersonate="true" userName="AIBablh" password="blah" />
<authorization> <deny users="?"/> </authorization>
I put a ReportViewer control on my only page.
I set the URL and the ReportName and run the application which returns HTTP 401, authorization error. What else do I have to do to make this little demonstration work?
I have read entries about credentials, about delegation, about application pools, about just about everything.
Isn't this just supposed to work? This works without difficulty on a Windows form.
Much thanks.
View 2 Replies
View Related
Sep 25, 2007
Hi,
I am trying to develop a custom web page to display and generate our company reports.
It shoud have a login page, and then a general window with 2 or 3 frames (top frame with general info, left frame with a
dynamic list of all existing reports (eventually categorized by a certain word in the report title), and a center frame
that has initialy the company logo and after selecting a specific report displays the parameters and afterwards the
generated report).
Does anybody has some pointers or links on the web where some of this is a little bit documented.
I have dev skills in vb.net and know how to work with ssrs.
My web dev skills are intermediate.
All info, tips, hints are very welcome ...
Greetings
Vinnie
View 2 Replies
View Related
