I am embedding the ReportViewer in an aspx page and the report comes up fine, but when I press the "Next Page" or "Last Page" buttons, I get the error: "Page navigation is out of range".
The application has session state turned off.
The problem occurs whether or not the viewstate for ReportViewer is turned on or off.
How can I fix this problem?
I am using a ReportViewer Control inside of a Windows Form and ran into an issue with the page navigation failing to update upon refresh (the report itself does refresh - the page navigation does not). If the initial report has one page and the subsequent refresh produces five pages, the page navigation window only shows one page. If you manually type in page two or three, nothing happens.
Here is a code snippet:
private void adpTaxServicesForm_Load(object sender, EventArgs e)
{
this.reportViewer.RefreshReport();
}
private void button1_Click(object sender, EventArgs e)
{
this.reportViewer.SuspendLayout();
this.reportViewer1.RefreshReport();
this.reportViewer.ResumeLayout();
}
Any help would be greatly appreciated...
Thanks,
-Fernando
Hi,
I've got a problem with paging and the ReportViewer. Here's how it goes:
First, I got the ReportViewer set to "print layout" and my reports having the correct size for each layout (landscape or portrait). Everything is fine with this since the number of page in the report reflects perfectly the number of page you can navigate with.
However, there seem to be a problem with displaying the correct number of page at the loading of the report. In fact, if the report contains 5 pages, the navigation header with often only shows 4 pages total. But once I click "next page", the correct number of page is then computed.
I didn't have any problem with that until I got a 2 pages report. The problem is, the navigation header is showing 1 total page and the "next page" button is disabled. So I cannot click it. I can, however, "scroll" down with the mouse wheel. But, this isn't a viable solution since some of our clients don't have mice with wheels.
Is there an option to tell the ReportViewer to complet the page count before showing any data on screen?
Thanks
EDIT: I'm using WinForm ReportViewer.
I am facing this issue In Fire Fox browser .When I click the Page Navigation Button , The Page Refreshes , but it not Navigating to the next or previous page .How ever It is working fine all other browsers .
<rsweb:ReportViewer ID="ReportViewer1" runat="server" ProcessingMode="Remote" Width="100%" Heigh="100%" SizeToReportContent="true" AsyncRendering="false" >
<ServerReport ReportServerUrl="" />
</rsweb:ReportViewer>
I created a report with a parameter. The parameter was created using a dataset in the report designer. This works fine. I deployed the report (webhost4life) and the report runs fine in the report manager. I am able to select my casenumber click on the default view report button and it works.
Problem: I embedd the report into an aspx page frmReports1.aspx. I call this page from another page (form). the frmReports.aspx page comes up and displays the default drop down list box with the casenumbers (fine). I select the casenumber and click on the view report button and NOTHING. I here the postbacks taking place but all that happens is the default value appears in the drop down list box and the toolbar shows. I checked permissions and everything is fine. I searched the forum and thought i found the solution with the inLine HTML and Async (still nothing) I can only think that something is not going right with the parameter. Here is my html, and code behind code. any help would be greatly apprcieated.
Zachary
<%@ Page Language="VB" AutoEventWireup="false" CodeFile="frmReports1.aspx.vb" Inherits="frmReports1" %>
<%@ Register Assembly="Microsoft.ReportViewer.WebForms, Version=8.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a"
Namespace="Microsoft.Reporting.WebForms" TagPrefix="rsweb" %>
<%@ Register Assembly="Microsoft.ReportViewer.WebForms, Version=8.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a"
Namespace="Microsoft.Reporting.WebForms" TagPrefix="rsweb" %>
<html xmlns="http://www.w3.org/1999/xhtml" >
<head runat="server">
<title>Untitled Page</title>
<style>html,body,form {height:100%}</style>
</head>
<body>
<form id="form1" runat="server">
<div>
<rsweb:ReportViewer ID="rvTest" runat="server" Width="600px" ProcessingMode="Remote" AsyncRendering="false" Height="75%" >
<ServerReport
DisplayName="Billable Hours"
ReportPath="/sddmtech/SnowandIce/rptHoursWorked"
ReportServerUrl="http://sqlreport01.mysite4now.com/Reportserver" />
</rsweb:ReportViewer>
</div>
</form>
</body>
</html>
aspx code behind
Imports System.Net
Imports System.Security.Principal
Imports Microsoft.Reporting.WebForms
Partial Class frmReports1
Inherits System.Web.UI.Page
Protected Sub rvTest_Init(ByVal sender As Object, ByVal e As System.EventArgs) Handles rvTest.Init
End Sub
<Serializable()> _
Public NotInheritable Class MyReportServerCredentials
Implements IReportServerCredentials
Public ReadOnly Property ImpersonationUser() As WindowsIdentity _
Implements IReportServerCredentials.ImpersonationUser
Get
Return Nothing
End Get
End Property
Public ReadOnly Property NetworkCredentials() As ICredentials _
Implements IReportServerCredentials.NetworkCredentials
Get
' Put your login and password here this works fine
Dim userName As String = ""
Dim password As String = ""
Dim domain As String = ""
Return New NetworkCredential(userName, password, domain)
'********************************************************************************
End Get
End Property
Public Function GetFormsCredentials(ByRef authCookie As System.Net.Cookie, ByRef userName As String, ByRef password As String, ByRef authority As String) As Boolean Implements Microsoft.Reporting.WebForms.IReportServerCredentials.GetFormsCredentials
End Function
End Class
Public Function GetFormsCredentials(ByRef authCookie As Cookie, _
ByRef userName As String, _
ByRef password As String, _
ByRef authority As String) _
As Boolean
authCookie = Nothing
userName = Nothing
password = Nothing
authority = Nothing
'Not using form credentials
Return False
End Function
Protected Sub form1_Load(ByVal sender As Object, ByVal e As System.EventArgs) Handles form1.Load
'ReportViewer1.ServerReport.ReportServerCredentials = New MyReportServerCredentials()
'rvTest.ServerReport.Refresh()
End Sub
Protected Sub Page_Load(ByVal sender As Object, ByVal e As System.EventArgs) Handles Me.Load
rvTest.ServerReport.ReportServerCredentials = New MyReportServerCredentials()
End Sub
End Class
I am needing to export some files in landscape when I select the PDF option in the dropdown on the ReportViewer.aspx page. How do I do this?
View 1 Replies View RelatedHi All...
Can anyone please help with embedding a chart into an aspx page ?? I have been busy with that for some time now, and still cant figure it out...
Thanks...
Is it posible to display the reporting services home page in the ReportViewer control?
I can display any of the published reports by setting the path e.g.,
serverReport.ReportPath = "/My Folder/My Report"
Is there a way of using the same command to show the home page?
I have tried a combination of "", "/" and "/Home" but none of them seem to work.
Hi
I had a problem accessing our report manager via the web front...
We deleted the virtual directories in IIS and then recreated them... this required us to make a change in the rsWebApplication.config file to include the URL in the ReportServerUrl tag before we could access the site again.
Now we have access to the site but when we attempt to view a report that we deployed to it - the report fails to render and returns a rsReportNotReady error, even though the report doesnt use a snapshot.
Furthermore, the strange thing is that the filters for the report don't display in their own collapsable bar as they used to before... they just display on the white part of the page. Neither does the reportviewer toolbar display properly. It appears as labels and textboxes going down the page and not in a toolbar as you might expect...
any help is appreciated... we suspect that it is some kind of configuration issue, but we have no clue where to begin...
I have a VS2005 aspx page using the ReportViewer to view a SSRS 2005 Report, all running locally on a Vista Business laptop.
I have an error because the stored procedure that it executes does not have the rights to Drop or Create Tables.
I can Preview it fine in VS2005 and I can go to ReportManager and run it OK.
This all worked fine on my XP laptop, so I am guessing that it is the Account used by IIS(7) to get to the ReportServer.
Does anyone have any clues on this?
Does it use NT AUTHORITYIUSR or NT AUTHORITYNETWORK SERVICE, etc.
Thanks in advance
GC
Here's the message and the Tables do exist
An error has occurred during report processing.
Query execution failed for data set 'BranchHeadCountExistStartFinishTotalDS'.
Cannot drop the table 'ExistingStaff', because it does not exist or you do not have permission. Cannot drop the table 'Starters', because it does not exist or you do not have permission. Cannot drop the table 'Finishers', because it does not exist or you do not have permission. Cannot drop the table 'TotalFinish', because it does not exist or you do not have permission. Cannot drop the table 'StartFinish', because it does not exist or you do not have permission. The specified schema name "dbo" either does not exist or you do not have permission to use it.
I've got a report that works great from vs.net, however when I deploy and attempt to run from reportviewer over asp.net, the date parameters do not take. they reset to default and don't impact that report. Also the calendar icon, produces a javascript error "OBJECT REQUIRED" on the below line.
function GetObjectPosition(obj)
{
var totalTop = 0;
var totalLeft = 0;
while (obj != document.body)
{
// Add up the position
totalTop += obj.offsetTop;
totalLeft += obj.offsetLeft; //ERROR HAPPENING HERE.
// Prepare for next iteration
obj = obj.offsetParent;
My reportviewer is inside a content page. My client is ie 7.0
thanks for any help or information.
When i am connecting Report Manager report through our ASP.NET 2.0 application using Report Viewer control frequently we get message ASP.Net Session expired .
How can we avoid this error.While i directly opens Reports through the Report Manager reports are opening without any problem.
My .Net application Code.
ReportViewer1.ServerReport.ReportServerUrl = new Uri("http://SERVER/reportserver");
ReportViewer1.ServerReport.ReportPath = @"/myreport/reportname";
Hello everyone,
I have a report that has a "Jump to report:" link in it and in the report it jumps to there is another "Jump to report:" link. When I click on this link I get the following error.
The path of the item '(null)' is not valid. The full path must be less than 260 characters long; other restrictions apply. If the report server is in native mode, the path must start with slash. (rsInvalidItemPath)
I have tried moving the link from the header to the body of the report with the same results.
This is only happening in the web reportviewer control as our windows app works flawlessly.
We are running SQL SERVER 2005 SP2.
Does anyone have a fix, workaround or idea how to resolve this issue?
Thanks in advance
-JW
We are using the webviewer control.
We get the following error when we try to export to EXCEL.
InternetExploer cannot download ...n=OnlyHtmlInline&Format=EXCEL from app.webcobra.com.
Internet Explorer was not able to open this Internet site. The requested site is either unavailable or cannot be found. Please try again later.
This error comes up almost immediatly after it starts trying to download the file. It is a large dataset but it isn't "overly large". There are basically 44 records.
The other wierd thing is that it works fine on our BETA servers but not on our Production servers. We figure this is a setting somewhere that we have missed.
And now I found out that if it just leave it sitting there it eventually asks me if I want to open the file and it opened fine.
So what was the above error all about????
Does anyone have any ideas that I can look into?
Thanks!
Hi, can anyone help with this pls - it's getting very fustrating! there seems to be some messages and text on this issue (looks like a common problem that MS haven't published anything about yet!) but nothing I could make heads or tails off... so any help here would be very useful!
I'm using VS2005 (release, NOT beta), the new reportviewer web control and an ASP.NET page - really basic, nothing fancy. I've set the reportviewer properties to:
ReportServerURL= http://mytestserver/reportserver
ReportPath = /AdventureWorks Sample Reports/Company Sales
I'm testing the ASP.NET page is on my local machine - and the reportviewer is connecting to a remote test server (W2k3 SP1). When I view the page, then I get
HTTP ERROR 401 Unauthorized
Directory Security on the report server is Windows Authentication - W2K3 with SP1 and Reporting Services 2005 (release, NOT beta)
Directory Security on my local machine is Windows Authentication - XP SP2 and VS2005 (release, NOT beta)
Any ideas pls?
Hi
I am trying to make a custom task. The custom task has one input, which i map to externalmetadata column in the task and one output.
When i run the task it fails with this error ( I am putting the whole SSIS message)
SSIS package "Package.dtsx" starting.
Information: 0x4004300A at Data Flow Task, DTS.Pipeline: Validation phase is beginning.
Information: 0x4004300A at Data Flow Task, DTS.Pipeline: Validation phase is beginning.
Information: 0x40043006 at Data Flow Task, DTS.Pipeline: Prepare for Execute phase is beginning.
Information: 0x40043007 at Data Flow Task, DTS.Pipeline: Pre-Execute phase is beginning.
Information: 0x402090DC at Data Flow Task, Flat File Destination [1855]: The processing of file "C:ole db eft data.txt" has started.
Information: 0x4004300C at Data Flow Task, DTS.Pipeline: Execute phase is beginning.
Error: 0xC0047062 at Data Flow Task, Lib [2387]: System.ArgumentException: Value does not fall within the expected range.
at Microsoft.SqlServer.Dts.Pipeline.Wrapper.IDTSBuffer90.DirectRow(Int32 hRow, Int32 lOutputID)
at Microsoft.SqlServer.Dts.Pipeline.PipelineBuffer.DirectRow(Int32 outputID)
at Lib1.LibPM.ProcessInput(Int32 inputID, PipelineBuffer buffer)
at Microsoft.SqlServer.Dts.Pipeline.ManagedComponentHost.HostProcessInput(IDTSManagedComponentWrapper90 wrapper, Int32 inputID, IDTSBuffer90 pDTSBuffer, IntPtr bufferWirePacket)
Error: 0xC0047022 at Data Flow Task, DTS.Pipeline: The ProcessInput method on component "Lib" (2387) failed with error code 0x80070057. The identified component returned an error from the ProcessInput method. The error is specific to the component, but the error is fatal and will cause the Data Flow task to stop running.
Error: 0xC0047021 at Data Flow Task, DTS.Pipeline: Thread "WorkThread0" has exited with error code 0x80070057.
Error: 0xC0047039 at Data Flow Task, DTS.Pipeline: Thread "WorkThread1" received a shutdown signal and is terminating. The user requested a shutdown, or an error in another thread is causing the pipeline to shutdown.
Error: 0xC0047021 at Data Flow Task, DTS.Pipeline: Thread "WorkThread1" has exited with error code 0xC0047039.
Information: 0x40043008 at Data Flow Task, DTS.Pipeline: Post Execute phase is beginning.
Information: 0x402090DD at Data Flow Task, Flat File Destination [1855]: The processing of file "C:ole db eft data.txt" has ended.
Information: 0x40043009 at Data Flow Task, DTS.Pipeline: Cleanup phase is beginning.
Information: 0x4004300B at Data Flow Task, DTS.Pipeline: "component "Flat File Destination" (1855)" wrote 0 rows.
Task failed: Data Flow Task
Warning: 0x80019002 at Package: The Execution method succeeded, but the number of errors raised (5) reached the maximum allowed (1); resulting in failure. This occurs when the number of errors reaches the number specified in MaximumErrorCount. Change the MaximumErrorCount or fix the errors.
SSIS package "Package.dtsx" finished: Failure.
----------------------------
This is my piece of code which is trying to put the data in the output buffer (ProcessInput function).
int GoodOutputId = -1;
IDTSInput90 inp = ComponentMetaData.InputCollection.GetObjectByID(inputID);
//GetErrorOutputInfo(ref errorOutputID, ref errorOutputIndex);
GoodOutputId = ComponentMetaData.OutputCollection[0].ID;
System.Console.Write("Here i am");
System.Console.Write(GoodOutputId);
if (!buffer.EndOfRowset)
{
while (buffer.NextRow())
{
if (_inputColumnInfos.Length == 0)
{
buffer.DirectRow(GoodOutputId);
}
else
{
buffer.DirectRow(GoodOutputId);
}
}
}
I have put any code in the else part as i am just trying to run the task as of now and later put the functionality in it.
Please let me know if i have missed something. Thanks in advance.
Vipul
Hi,
I'm getting an error that reads "The conversion of a char data type to a datetime data type resulted in an out of range value data time value"
for the following view sql:
CONVERT (datetime, System . dbo.zStatus.MyDate)
MyDate is a char(8)
Any suggestions?
Thanks,
Denise
I have created one reports but all the records are displaying on one page.find a solution to display the records page by page. I created the same report without group so the records are displaying in page by page.
View 3 Replies View RelatedI am trying to update a database that has decimal(4,1) in a field. It can hold 100, but when I change a value in a gridview to 100 and update it, I get the error below. Any reason wny? Parameter value '100.0' is out of range.
Description: An
unhandled exception occurred during the execution of the current web
request. Please review the stack trace for more information about the
error and where it originated in the code.
Exception Details: System.ArgumentException: Parameter value '100.0' is out of range.
Source Error:
Line 1841: int returnValue;Line 1842: try {Line 1843: returnValue = command.ExecuteNonQuery();Line 1844: }Line 1845: finally {
Source File: c:WINDOWSMicrosoft.NETFrameworkv2.0.50727Temporary ASP.NET Filesmyprofile45e0ea66e9c9d282App_Code._wfrgryw.27.cs Line: 1843
Stack Trace:
[ArgumentException: Parameter value '100.0' is out of range.] System.Data.SqlClient.TdsParser.TdsExecuteRPC(_SqlRPC[] rpcArray, Int32 timeout, Boolean inSchema, SqlNotificationRequest notificationRequest, TdsParserStateObject stateObj) +4085 System.Data.SqlClient.SqlCommand.RunExecuteReaderTds(CommandBehavior cmdBehavior, RunBehavior runBehavior, Boolean returnStream, Boolean async) +1021 System.Data.SqlClient.SqlCommand.RunExecuteReader(CommandBehavior cmdBehavior, RunBehavior runBehavior, Boolean returnStream, String method, DbAsyncResult result) +314 System.Data.SqlClient.SqlCommand.InternalExecuteNonQuery(DbAsyncResult result, String methodName, Boolean sendToPipe) +413 System.Data.SqlClient.SqlCommand.ExecuteNonQuery() +11 5 StatisticsDALTableAdapters.StatisticsTableAdapter.UpdateStatistics(Nullable`1 ID, Nullable`1 PlayerID, Nullable`1 FG, Nullable`1 TTP, Nullable`1 FT, Nullable`1 RPG, Nullable`1 DEFR, Nullable`1 OFFR, Nullable`1 APG, Nullable`1 SPG, Nullable`1 BPG, Nullable`1 Turnovers, Nullable`1 PPG, String SYear, String EYear, String StatisticsType) in c:WINDOWSMicrosoft.NETFrameworkv2.0.50727Temporary ASP.NET Filesmyprofile45e0ea66e9c9d282App_Code._wfrgryw.27.cs:1843 YourHoopSpace.BLL.StatisticsBLL.UpdateStatistic(Int32 ID, Int32 playerID, Nullable`1 fg, Nullable`1 ttp, Nullable`1 ft, Nullable`1 rpg, Nullable`1 defr, Nullable`1 offr, Nullable`1 apg, Nullable`1 spg, Nullable`1 bpg, Nullable`1 turnovers, Nullable`1 ppg, String sYear, String eYear, String statisticsType) in f:MyProfileApp_CodeBLLStatisticsBLL.cs:128
Hi everyone, this is the exception:
System.Data.SqlClient.SqlException: The conversion of a char data type to a datetime data type resulted in an out-of-range datetime value
Here's my code!
... 'datagrid code
cmdSelect.CommandText = "SELECT * FROM [Table] WHERE [Date and Time] > '" & Me.tbFromDate.Text & "' AND [Date and Time] < '" & Me.tbToDate.Text & "'"
...
Me.tbFromDate.Text and Me.tbFromDate.text look like this: 27/11/2003 1:11:43 PM
The SQL Query works fine - just that this code gives a runtime error.
Can someone help?? I'm guessing I have to do somekind of conversion!!
Andrew
$picid = $_GET['picid'];
$commentby= $_REQUEST['commentby'];
$commentby= filter_text($commentby);
$commentby= mysql_real_escape_string($commentby);
$comment= $_REQUEST['comment'];
$comment= filter_text($comment);
$comment= mysql_real_escape_string($comment);
$action = $_REQUEST['action'];
if($action == 'post_comment'){
$insert_comment = "INSERT INTO comments ( picid, comment, commentdate, commentby) VALUES ('".$picid."', '".$comment."', CURRENT_TIMESTAMP, '".$commentby."')";
if (!mysql_query($insert_comment))
{
die('Error: ' . mysql_error());
}
header("Location: ");
}
returns-
Error: Out of range value adjusted for column 'picid' at row 1
picid is of int datatype :/
Hello All,
I am using SQL 2005 SP2. I have a table partitioned on date range. I am trying to SWITCH, MERGE and SPLIT partitions.
My SWITCH and MERGE work great. When the SPLIT query is executed, an error 9002 is thrown....
"The transaction log for database is full. To find out why space in log cannot be resued, see log_reuse_wait_desc column in sys.databases."
Below are more details...
- All SWITCH, MERGE and SPLIT are executed in one TRANSACTION.
- After SWITCH and MERGE, I execute a query set the partition scheme "NEXT USED [PRIMARY]".
- Finally i execute SPLIT statement.
Could you please tell me where am I going wrong?
Any help would be appreciated.
Thanks..................
I am attempting to write a SQL query that retrieves info processed between two times (ie. 2:00 pm to 6:00 pm) during a date range (ie. 8/1/06 to 8/14/06)... I am new to SQL and am perplexed... I have referenced several texts, but have not found a solution. Even being pointed in the right direction would be greatly appreciated!!
View 6 Replies View RelatedWhen we try to run aggregation or purge queries on some tables
we are getting following message:
" error [I/O error (bad page ID) detected during read at offset 0x000001ad65a000 in file 'E:MSSQL2KDataGenesys_DataMartGenesys_Datamart.mdf '. Severity 24, State 2, Procedure 'PWMGENESYSDB1 n u! ll', Line 1]"
After this we executed DBCC CHECKDB. Attaching the output obtained after executing this command, to fix these errors we executed DBCC repair_allow_data_loss. I am attaching output for this also. Pls go thru the logs and pls let me know what could be the problem and how it can be addressed.
Thnx & Rgds
Malla
Hi all i have setup merge replication with one publisher and 3 subscribers
The replication worked fine for about 2 months then i recieved the following error on all my subscriptions
The Publisher failed to allocate a new set of identity ranges for the subscription.
This can occur when a Publisher or a republishing Subscriber has run out of identity
ranges to allocate to its own Subscribers or when an identity column data type does
not support an additional identity range allocation. If a republishing Subscriber has
run out of identity ranges, synchronize the republishing Subscriber to obtain more
identity ranges before restarting the synchronization. If a Publisher runs out of identit
(Source: MSSQL_REPL, Error number: MSSQL_REPL-2147199417)
Get help: http://help/MSSQL_REPL-2147199417
I have updated my sql server to service pack 2
The publisher is sql Standard edition and the subscribers are Express edition
Any help would be great
Thanx
Hi all,I am getting this error when insert values from one table to another inthe first table the values are varchar (10). In the second they aredatetime. The format of the data is mm/dd/yyyy to be easily convertedto dates. The conversion in this case is implicit as indicated in SQLServer documentation. Here is my query:INSERT INTO Campaign (CampaignID, Name, DateStart, DateEnd, ParentID,ListID)SELECT mysqlfactiva.dbo.campaigns.campaign_id AS CampaignID,mysqlfactiva.dbo.campaigns.campaign_name AS Name,MIN(mysqlfactiva.dbo.programs.start_date) AS DateStart,MIN(mysqlfactiva.dbo.programs.end_date) AS DateEnd,NULL AS ParentID,NULL AS ListIDFROM mysqlfactiva.dbo.campaigns, mysqlfactiva.dbo.programsWHERE mysqlfactiva.dbo.campaigns.campaign_id =mysqlfactiva.dbo.programs.campaign_idGROUP BY mysqlfactiva.dbo.campaigns.campaign_id,mysqlfactiva.dbo.campaigns.campaign_name,mysqlfactiva.dbo.campaigns.descriptionUNIONSELECT program_id + 100000, program_name, start_date, end_date,campaign_id AS ParentID, NULL AS ListIDFROM mysqlfactiva.dbo.programsUNIONSELECT execution_id + 200000, execution_name, start_date,end_date, program_id + 100000 AS ParentID, NULL AS ListIDFROM mysqlfactiva.dbo.executionsUNIONSELECT wave_id + 300000, wave_name, start_date, end_date,mysqlfactiva.dbo.waves.execution_id + 200000 AS ParentID, NULL ASListIDFROM mysqlfactiva.dbo.waves, mysqlfactiva.dbo.executionsWHERE mysqlfactiva.dbo.waves.execution_id =mysqlfactiva.dbo.executions.execution_idI am referencing programs table two times. If I just select this all Iget all data I need. When doing insert I get a message:Server: Msg 242, Level 16, State 3, Line 1The conversion of a char data type to a datetime data type resulted inan out-of-range datetime value. The statement has been terminated.If I execute just first part of the query before first union, I insertdata fine:INSERT INTO Campaign (CampaignID, Name, DateStart, DateEnd, ParentID,ListID)SELECT mysqlfactiva.dbo.campaigns.campaign_id AS CampaignID,mysqlfactiva.dbo.campaigns.campaign_name AS Name,MIN(mysqlfactiva.dbo.programs.start_date) AS DateStart,MIN(mysqlfactiva.dbo.programs.end_date) AS DateEnd,NULL AS ParentID,NULL AS ListIDFROM mysqlfactiva.dbo.campaigns, mysqlfactiva.dbo.programsWHERE mysqlfactiva.dbo.campaigns.campaign_id =mysqlfactiva.dbo.programs.campaign_idGROUP BY mysqlfactiva.dbo.campaigns.campaign_id,mysqlfactiva.dbo.campaigns.campaign_name,mysqlfactiva.dbo.campaigns.descriptionAs soon as I use union I get the above error. This is very strangesince even when I execute the query using first union where the datescome from the same table 'programs' I get the error. Why I can insertfrom programs first time and can's second time?Any help will be appreciated.Thanks,Stan
View 1 Replies View RelatedI am unable to migrate any DTS packages, from a SQL Server 2000 package, from a structured storage file, or from a DTS package imported into SQL2005 (Developer Edition, 32 bit). Running the Package Migration Wizard, every time I get to the List Package screen, i get the error below. I haven't found any other mention of this so far. Anyone else seen this error or have suggestions?
View 20 Replies View RelatedAdd parameter to "navigation" url -
Hello,
I'm trying to add a parameter to my JUMP TO URL but it doesn't work.
basiclly i'm useing javascript there:
javascript:window.open('http:www.a.com?num=XXX');
i want to change the XXX with a value from the dataset.
I tried - javascript:window.open('http:www.a.com?num= + Fields!ME.Value ');
or - javascript:window.open('http:www.a.com?num= & Fields!ME.Value ');
it didn't worked :(
any help?
I have created a one-page client summary report. My problem is that I can only get the report to show one client and there are many. How do I add record navigation functionality to my report?
View 4 Replies View RelatedHello
I have a link on the header to jump to another report. It was working fine on test server but when deployed to production, is giving the followin error. Any suggestions
Thanks
Inder
The path of the item "(null)" is not valid. The path must be less than 260 characters long and must start with slash. Other restrictions apply. (rsInvalidItemPath)
I've a report whose columns are returned from a stored procedure. Now I want to display the report based on a date range. The date field is Received. It's in dbo.master. I added 2 parameters start date and end date. When I check the condition if dbo.master.Received>StartDate and dbo.master.Received < EndDate directly I'm getting error. Could someone tell me what mistake I'm doing? Thanks for your help!ALTER Procedure [dbo].[USP_Reports_NewTier1]
@ClientCode VARCHAR(7) = '',@UserID INT = 0
,@OrderID INT =0
,@StartDate datetime,@EndDate datetime
IF @ClientCode <> '' and dbo.master.Received > StartDate and dbo.master.Received<EndDateBEGIN SELECT --Root Select --ClientName @ClientName = (Select Name FROM dbo.customer c WHERE c.Customer = @ClientCode) ,@TotalDollarValue = (SELECT SUM(m.current1-m.paid1) FROM dbo.master m WHERE phase=1 AND m.Customer = @ClientCode AND M.Status <> 'PIE')
,@AverageAge = ISNULL((select avg(age) from (select datediff(day,Received,CASE WHEN clidlp>clidlc then clidlp else clidlc END)* -1 as age from dbo. master M WHERE phase=1 AND customer = @ClientCode AND M.Status <> 'PIE') x),0)END
Hi all,
I'm trying to design a website with my old MS Access Application as a template, because my users know that style. I use textboxes to display data from the MSSQL 2005 database, one record and 20 fields per page ....and i would like to navigate through the records with 4 buttons: first, last, next and prior, placed on the page.I tried a lot of things, and my last attemt was a Stored Procedure with a Cursor to do the trickbut.... it did not work
It's very easy to do this in MS Access.
Can anyone tell me a simple way to do this ?
Hi everyone I stumbled across this problem recently and have tried to figure out a good solution and have come up with nothing.
Environment: ADO.NET, ASP.NET 2.0, MS SQL 2000, C#
Problem: I have a set of data which I order according to two columns of data in the set. One column is a varchar or a date value (depending on what the user has chosen from GUI controls) and the other is an identity column. This dataset contains lots of data so its not feasible to pull the entire dataset to the client, also everything must be performed via ADO.net (no stored procedures). When the user selects one of the records I load another page and drill down into the record details (think of this as the record details page). This is fine and easy but on this record details page I would like to keep a Next and Previous button so users can move to the next record in the set (remember this set is sorted somehow on the previous page). My question is how can I know what next record should be? It would seem I need to attach a sequential number to the rows of data so I can easily grab the next one in the set. Solutions to this seem to make use of a temp table which I dont think is possible via ado.net.
Is there a decent performing way to do this through ado.net?
Thanks for all insight.