Reporting Service 2005, Custom Security Extension Failed.
Mar 10, 2006
Hi,
I am trying the get the custom security extension samples to work on my machine. I have installed everything according the sameple help file. However, i am getting a "Authentication Ticket is not issued by LogonUser." error after I attempted to log on to the report manager thru UILogon.aspx page. I already created an admin user. Upon a closer inspection, I realized that the authentication went thru okay, however, the authentication Ticket Name contained in the "RSAuthenticationHeader" has a duplicate value of "sqlauthticket, sqlauthticket". So apparently, the report server added this value twice to the response header. Has anyone seen this error before? How would you fix it? Also to bypass this error, I parsed out the header and take the correct auth ticket name, now report manager just redisplays the logon page and not letting me thru. Has anyone have seen that before? I am running in Win 2003 server, IIS 6, .NET 2.0 and SQL server 2005 enterprise version.
Thanks for the help,
Eric
View 1 Replies
ADVERTISEMENT
Aug 22, 2006
Hi,
The custom security extension generates the following error, when try to access Report Manager. The specifications are as follows.
1. Its 64-bit SQL Server (Reporting Services) and installed as default instance.
2. The Report Server is accessible programmatically. I can publish, view reports without problems, but Report Manager gives an error.
3. Another instance (named instance) of Reporting Services with the same custom security extension on same server is working fine. Report Manager opens up without problems.
4. Both the instances working fine since 3 installation and configuration (3 months back). Now, only the Report Manager of the default instance is not openeing up.
ReportServerWebApp__08_22_2006_08_52_20.log
-------------------------------------------------------------------------
w3wp!ui!1!8/22/2006-08:52:56:: i INFO: Overwriting existing cookie
w3wp!ui!1!8/22/2006-08:52:57:: e ERROR: The report server is not responding. Verify that the report server is running and can be accessed from this computer.
w3wp!ui!1!8/22/2006-08:52:57:: e ERROR: HTTP status code --> 500
-------Details--------
Microsoft.ReportingServices.UI.Global+RSWebServiceWrapper+CantCommunicateWithReportServerException: The report server is not responding. Verify that the report server is running and can be accessed from this computer.
at Microsoft.ReportingServices.UI.Global.RSWebServiceWrapper.GetSecureMethods()
at Microsoft.SqlServer.ReportingServices2005.RSConnection.IsSecureMethod(String methodname)
at Microsoft.SqlServer.ReportingServices2005.RSConnection.ValidateConnection()
at Microsoft.ReportingServices.UI.Global.SecureAllAPI()
at Microsoft.ReportingServices.UI.ReportingPage.EnsureHttpsLevel(HttpsLevel level)
at Microsoft.ReportingServices.UI.ReportingPage.ReportingPage_Init(Object sender, EventArgs args)
at System.EventHandler.Invoke(Object sender, EventArgs e)
at System.Web.UI.Control.OnInit(EventArgs e)
at System.Web.UI.Page.OnInit(EventArgs e)
at System.Web.UI.Control.InitRecursive(Control namingContainer)
at System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint)
w3wp!ui!1!8/22/2006-08:52:57:: i INFO: Overwriting existing cookie
w3wp!ui!1!8/22/2006-08:52:58:: e ERROR: Exception in ShowErrorPage: System.Threading.ThreadAbortException: Thread was being aborted.
at System.Threading.Thread.AbortInternal()
at System.Threading.Thread.Abort(Object stateInfo)
at System.Web.HttpResponse.End()
at Microsoft.ReportingServices.UI.ReportingPage.ShowErrorPage(String errMsg) at at System.Threading.Thread.AbortInternal()
at System.Threading.Thread.Abort(Object stateInfo)
at System.Web.HttpResponse.End()
at Microsoft.ReportingServices.UI.ReportingPage.ShowErrorPage(String errMsg)
The service is running fine. Any suggestions/pointers would be greatly appreciated.
THanks in advance
View 4 Replies
View Related
Dec 28, 2007
I follow the instructions here to deploy the sample security extension: http://www.codeplex.com/MSFTRSProdSamples/Wiki/View.aspx?title=SS2005!Security%20Extension%20Sample&referringTitle=Home
After I have configure the config files and created the "UserAccounts" database I restart the IIS and tried to connect to Report Manager at http://localhost/Reports
This is the error i got: The report server is not responding. Verify that the report server is running and can be accessed from this computer.
I went to Services and saw my Reporting Services is stopped. Tried to start Reporting Services and it timed out.
View 3 Replies
View Related
May 29, 2007
Hi All,
My application is currently integration with reporting services using custom security extension. I have my own USER and ROLE database to determine who/which role can access certain reports.
My question is how to give access a report to be viewable by everyone? I dont want to assign all users or all roles to achieve this.
The other thing that I found out is, let say I change the name one of the user/role. Because of this, the authorization will fail because the old name/role is not in the DB anymore. Is this expected? or is there a workaround it?
Your help is appreciated.
Thanks!
View 2 Replies
View Related
Jan 21, 2008
Roles Table:
RoleID, RoleName
<RoleID1>, Allow_ClientFolder
<RoleID2>, Allow_ClientReportA
<RoleID3>, Allow_ClientReportB
<RoleID4>, Allow_CompanyFolder
<RoleID5>, Allow_CompanyReportA
<RoleID6>, Allow_CompanyReportB
UsersInRoles Table:
UserID, RoleID
<UserID1>, <RoleID1>
<UserID1>, <RoleID2>
<UserID2>, <RoleID4>
<UserID2>, <RoleID5>
<UserID2>, <RoleID6>
<UserID2>, <RoleID1>
<UserID2>, <RoleID3>
e.g.
when the <UserID1> clicks on the "home" link show only "Client" folder and when <UserID1> clicks on the "Client" folder only "ClientReportA" will show.
Here is the accessable map for each user:
<UserID1>
Client
ClientReportA
<UserID2>
Client
ClientReportB
Company
CompanyReportA
CompanyReportB
Question:
What is the best way to implement CheckAccess? At first I thought I can access the item names and I can test authorization through that, but AceCollection contains operation permission of the accessing object.
View 4 Replies
View Related
Nov 9, 2007
Greetings. I have developed our own custom security extension, implemented forms based authentication, and can authenticate from report manager, report server and sql studio. So far so good.
However, when it comes to Authorization, i'm unclear in a few areas and would appreciate if someone could help me out with the following questions. It should be noted that in the code I have granted an administrator user full access to all operations and permissions, and then tested against both an administrator user and a normal user.
IAuthorizationExtension.GetPermissions summary says
"Returns the set of permissions granted a specific user for an item in the report server database."
Inparticular, the secDesc parameter is supposed to contain the security descriptor associated with the item.
However, with our extension this parameter is always null, even if I have already granted access for a user, which is confirmed through logging in CreateSecurityDescriptor.
Through the report manager or sql studio I can see that the permissions have been created, so I can't understand why I never see them in the GetPermissions method? This then (seems to) flow through to the various CheckAccess methods, where the users are authenticated, but are not authorized to perform any operations. i.e. in report manager a user has no folders or reports available.
Is RS authorization designed around the concept that the details will always be stored in it's own database?
Ideally, we'd like to have the various roles, users and function authorizations defined in our own security framework. This is working great for the authentication aspect of the extension, but unless there is a mechanism which exposes the details of the particular authorization process (e.g. the name of the folder being viewed or report being run), then I can't see a way we can implement it. Unless i'm missing something fundamental of course!
Using Report Builder as the Administrator user (or any other user), I can see no data models available, even though I have created them via Report Manager, and I get the following exception trying to open up the list of reports:
System.Web.Services.Protocols.SoapException: The permissions granted to user '' are insufficient for performing this operation. ---> Microsoft.ReportingServices.Diagnostics.Utilities.AccessDeniedException: The permissions granted to user '' are insufficient for performing this operation. at Microsoft.ReportingServices.Library.ListChildrenAction.PerformActionNow() at Microsoft.ReportingServices.Library.RSSoapAction.Execute() at Microsoft.ReportingServices.WebServer.ReportingService2005.ListChildren(String Item, Boolean Recursive, CatalogItem[]& CatalogItems)
I have implemented a report server proxy (inherited from ReportService2005) as per the example, to pass through the authorization cookie. Any clues as to what could be wrong?
Finally, I suspect part of my problem may be in assignment of users to System Roles ("System Administrator" and "System User"), I'm not sure if these are meant only for Windows Authentication? I can see no way of assigning these roles to any of my users using Forms Authentication.
Thanks for any help or advice you can give!
View 25 Replies
View Related
Mar 21, 2007
I have written CDE to retrieve and process data before generating the report. It works very well inside VS.Net. However, when deployed to the report server I get the following error
An error has occurred during report processing. Cannot create a connection to data source 'CallsTaken'. Request for the permission of type 'System.Security.Permissions.SecurityPermission, mscorlib, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089' failed.
I have added appropriate CAS entry in rssrvpolicy.config file as following
<CodeGroup
class="UnionCodeGroup"
version="1"
Name="CustomDataExtensionCodeGroup"
Description="Code group for the Custom Data Extension"
PermissionSetName="FullTrust">
<IMembershipCondition
class="UrlMembershipCondition"
version="1"
Url="C:Program FilesMicrosoft SQL ServerMSSQL.2Reporting ServicesReportServerinCSS.CustomDataExtension.dll"/>
</CodeGroup>
I have added appropriate entry into rsreportserver.config for data extension as
<Extension Name="Dataset Extension" Type="CSS.RS.Extensibility.CustomDataExtension.DsConnectionWrapper, CSS.CustomDataExtension"/>
Even then I continue to get this error. Any help? Is there anything else I am missing? I am using VS .Net 2005, SRSS 2005 on W23 machine.
I have been stuck here for a while now. Help is appreciated.
Thanks
View 2 Replies
View Related
Feb 28, 2008
What is Reporting Service Extension and how can I check that whether it is installed in my PC or not.
And if not then what is requirement for get it installed...?
View 6 Replies
View Related
May 5, 2015
I am using Custom Data Processing Extension to call a stored procedure. Iam getting following error when creating a dataset in report designer using the extension. I wrote the code in c#.
could not update a list of fields for the query. verify that you can connect to the data source and that your query syntax is correct.(Details-Object reference not set to an instance of an object.)
Here is my code
using System;
using System.Collections.Generic;
using System.Text;
using System.IO;
using System.Data;
[Code] .....
View 2 Replies
View Related
Sep 19, 2007
Hi,
I'm trying to deploy Reporting Services on an Internet-facing web server using a custom security extension (forms authentication). We will be putting Report Manager on the Web Server outside of the firewall, and Report Server on another machine inside the firewall. When testing the solution in a development environment with Report Manager and Report Server on the same box, the solution works fine.
When testing it using the Internet-facing environment described above, it almost works but there seems to be an issue with the authentication cookie that is generated. Here's what happens:
1. User enters credentials on UILogon.aspx and submits form.
2. In the code-behind, LogonUser() is called through a web service proxy and the authentication cookie is returned successfully. The code used here to set the cookie is the same code used in the Forms Authentication sample that ships with RS2005.
3. The user is redirected to Folder.aspx, and the request hangs for a while, and eventually kicks you back out to UILogon.aspx, as if it lost the authentication cookie. When doing a trace on the HTTP header, the cookie is still there.
Is there anything special I need to do to make the Report Server "see" the cookie when I have Report Manager and Report Server on different machines?
Any help would be much appreciated!
Mike
View 2 Replies
View Related
Feb 22, 2011
I am trying to fetch the sharepoint list data into the SSRS report.
I have given credentials in shared datasource to access remote datasource.
In preview i m getting the following error:
Data extension supports windows integrated security and no credentials only.
View 3 Replies
View Related
May 15, 2008
Hello,
I have followed all the steps indicated in the Security Extensions Sample for RS 2005, and I have not changed any webpage code. However, I get the following errors:
- when accessing http://<computername>/ReportServer Access to the path 'C:Program FilesMicrosoft SQL ServerMSSQL.3Reporting ServicesReportServerlogon.aspx' is denied
- when accessing http://<computername>/Reports Error message 401.3: You do not have permission to view this directory or page using the credentials you supplied
Can someone help please?
Thank you!
View 1 Replies
View Related
Feb 21, 2007
I am attempting to deploy the sample Security Extensions. When I navigate to <machinename>/reports in IE, it works fine and I am able to register the administrator. The user exists in the table correctly, but I am unable to login as the user. It keeps going back to the same uilogon.aspx redirect page.
It appears to be a similar error as http://forums.microsoft.com/TechNet/ShowPost.aspx?PostID=289636&SiteID=17
However, I am using the machine name the entire name, never referring to it as localhost. Any ideas? Thanks!
View 1 Replies
View Related
Sep 3, 2015
Currently we are using Custom Delivery Extension for SSRS 2008R2 We are planning to move it SSRS2012
My Question is: Whether we can use the same Code used for SSRS2008R2 to SSRS2012?
if not what code changes we should do?
View 3 Replies
View Related
Oct 14, 2005
Hello there I have trying to figure out for days how to enable FullTrust for my Reporting Services security extension.
View 9 Replies
View Related
Apr 30, 2008
I have written a custom rendering extension for my reporting services. In one of my function inside custom rendering assembly, I want to access the underlying dataset and manipulate with it. I gain some knowledge on dataextension but not able to use it successfully. Can someone please help me get to underlying dataset?
Thanks.
View 2 Replies
View Related
Jul 7, 2007
I need to use HTML OWC rendering extension as an export option. I typed the following entry in the RSReportServer.config and RSReportDesigner.config files, and nothing occurs. Some suggestion?<Extension Name="HTMLOWC" Type="Microsoft.ReportingServices.Rendering.HtmlRenderer.HtmlOWCRenderingExtension,Microsoft.ReportingServices.HtmlRendering" Visible="false"/>
View 3 Replies
View Related
Jun 17, 2006
I got a website using .Net v2.0.xxx and SQL Server Express 2005 in a Win2003 Domain Controller machine. Both website and SQLServer is running on the same machine. Website and SQLServer are configured to accept only Integrated Windows Authentication. Domain Users group is added in SQLServer logins list and given Read and Write access to the database used by the website. Also Domain Admins groups is added and given full permission to the same database.
I thought since website will run only with login details from Active Directory, SQL Server connection is also going to be validated against the same login details. But I felt I got the whole concept wrong when I received the error mentioned in subject line.
Can anyone please explain the best way to connect to database in above-mentioned context. Please remember that I need to implement different rights on the database for 'Domain Users' and 'Domain Admins' group. If there is a better approach than using these groups, lemme know please.
Thanks,
AbdulGafoor GK
View 3 Replies
View Related
Apr 12, 2007
Hi,
I'm having a lot of trouble trying to set up a custom security extension with Reporting Services 2005. Following the VB example from McGraw Hill Osborne (http://www.mhprofessional.com/product.php?cat=112&isbn=0072262397&cat=112), I've compiled the .dll for the extension and made the changes to the ReportManager and ReportServer .config files. After I reset IIS and return to the RS website, it displays "The report server has encountered a configuration error..." and I get a message in my System Event log:
The application-specific permission settings do not grant Local Activation permission for the COM Server application with CLSID
{BA126AD1-2166-11D1-B1D0-00805FC1270E}
to the user MYMACHINEASPNET SID (S-1-5-21-1708537768-839522115-1343024091-1005). This security permission can be modified using the Component Services administrative tool.
Wondering if anyone else has had similar trouble and how did they get around it?
View 2 Replies
View Related
Mar 28, 2007
Hi,
I am using SQL Server 2005 Reporting Services. I want to make it secure. I am also using WCF services and made them secure using Claim based System.Identity Model.
I want to apply same claim based model to Reporting Services.
How can I do that?
Amit
View 2 Replies
View Related
Oct 25, 2007
Hi all,
My query should be pretty simple to answer by the gurus. I have SQL Server Express Advance series installed at my system along with VS 2005. I tried the reporting services (remote mode) to display a report in the report viewer on my aspx page. The report simply uses an SQL query to get the result. Everything works fine and dandy!
However if i want to get data from my own data set, i used a webservice and ussed the XML data source option in the report to traverse through the XML. In the preview mode of the RDL everything works fine however when i deploy or rather run it using report viewer on my webpage, it gives an error that 'XML' has not been registered as an extension etc.
I looked in the rsserver config file, it IS configured. The only answer i have is that the EXPRESS version of SQL only supports the regular SQL data sources. I do not understand if that was the case, why does the preview mode work fine??
If i am correct then for the next release the ms developers should disable that or rather give a more meaning full error. I spent an entire day fideling around just to find out that it isnt supported with debates all over the place as to why in the world does it work in the preview mode?
Anyhoo, to get around that issue, i am wondering if the Custom Data Extension would work on the SQL Express or not? I am assuming it wouldnt. Please clearify this. Ideally all i want is to access my own data set in the report, no SQL queries or whatever, CDE seems the way forward but does SQL Express allow it?
Many thanks guyz.
Regards
Zeeshan
(btw, its only been two days since i started working with reporting services, so be gentle :-D )
View 1 Replies
View Related
Feb 8, 2007
I have been getting to grips with writing a custom data processing extension for using a supplied dataset. I have got it working OK so far, but I don't see how to make use of relational data. There's plenty of code for walking through the fields, but nothing to walk through the tables. Since this clearly has to be possible can someone tell me where I'm going wrong?
Thanks
John Williams.
View 3 Replies
View Related
Sep 26, 2007
I programmed a Source extension, that accesss a text file. In my code I have the following code to open a file:
protected override void reader(PipelineBuffer buffer)
{
TextReader reader = File.OpenText(_filename);
The komponnet works well. How do I grant permissions to access this text file? Because I got problems when I try to run my package using a task created in the SQL Server Agent.
View 3 Replies
View Related
Mar 30, 2007
Target: RS2000, Oracle-DB
I build a CDE on the base of the FSi-Example.
Deploying worked fine
here is the problem:
I build a new shared data source, but can't edit the connection string. the button disables itself. why?
Therefore I copied the string from an existing datasource.
I supplied the auth-data and all seemed to be fine.
when i want to build a dataset with this datasource, I get something like this:
"no connection to database possible
check connection string and test connection. "
But this is not possible because of the disabled edit button.
Can anyone help please? What's wrong?
dev-pc and server are not the same machine.
I made the following changes to the config-files:
rspreviewpolicy.config
Code Snippet
<CodeGroup class="UnionCodeGroup"
version="1"
PermissionSetName="FullTrust"
Name="CDECodeGroup"
Description="Code group for my Custom data processing extension">
<IMembershipCondition class="UrlMembershipCondition"
version="1"
Url="C:ProgrammeMicrosoft SQL Server80ToolsBinMicrosoft.Samples.ReportingServices.CustomDataExtension.dll"
/>
</CodeGroup>
RSReportDesigner.config
Code Snippet
<Extension Name="CDE Test Ext" Type="Microsoft.Samples.ReportingServices.CustomDataExtension.CustomConnection,Microsoft.Samples.ReportingServices.CustomDataExtension"/>
<Extension Name="CDE Test Ext" Type="Microsoft.ReportDesigner.Design.GenericQueryDesigner,Microsoft.ReportingServices.Designer"/>
rssrvpolicy.config
Code Snippet
<CodeGroup class="UnionCodeGroup"
version="1"
PermissionSetName="FullTrust"
Name="CDECodeGroup"
Description="Code group for my Custom data processing extension">
<IMembershipCondition class="UrlMembershipCondition"
version="1"
Url="C:Program FilesMicrosoft SQL ServerMSSQLReporting ServicesReportServerinMicrosoft.Samples.ReportingServices.CustomDataExtension.dll"
/>
</CodeGroup>
RSReportServer.config
Code Snippet
<Extension Name="CDE Test Ext" Type="Microsoft.Samples.ReportingServices.CustomDataExtension.CustomConnection,Microsoft.Samples.ReportingServices.CustomDataExtension"/>
View 14 Replies
View Related
Nov 8, 2007
I am working through this example:
http://www.devx.com/dbzone/Article/31336/0/page/5
I have following all the steps but I am getting this error:
---------------------------
Microsoft Visual Studio
---------------------------
The designer extension DATASET could not be loaded. Check the configuration file RSReportDesigner.config.
---------------------------
OK
---------------------------
I have doubled checked the edits I made to that config file. Rebooted, relaunched, etc. No matter what, I cannot get past that error message.
I am using a Win XP machine with SQL Server 2005 Express Edition with Advanced Services SP2. Just curious, but does express version support CDEs?
Thanks,
Dan
View 2 Replies
View Related
Mar 9, 2006
Hi,
I have installed the SSRS 2005 Forms based login security extension as per the sample and instructions that come with the product install. I have double checked my work and debugged up to the point explained here.
My user is in the database and I can get to the login page. I have traced the code and can see the user being authenticated properly by server.LogonUser, the authentication cookie being created and placed in the response object, and then the redirect url being set to the reports/pages/folder.aspx. I have employed tcptrace and can see the sqlAuthCookie set in subsequent posts.
Unfortunately the redirect to folder.aspx never happens. I keep returning to UILogon.aspx. I think their is something either wrong with the auth cookie or the web.config in the ReportServer IIS virtual directory. The relevant xml from the web.config is attached below.
I would appreciate any thoughts. I am running on W2K3 SP1. Thanks.
Mitch
<identity impersonate="false" />
<!--<authentication mode="Windows" />-->
<authentication mode="Forms">
<forms loginUrl="logon.aspx" name="sqlAuthCookie" timeout="60" path="/"></forms>
</authentication>
<authorization>
<deny users="?" />
</authorization>
View 3 Replies
View Related
Mar 13, 2007
On my current project we have a requirement to re-authenticate the user when accessing sensitive information.
We want re-authenticate using standard NT logins against Active Directory (not a custom database or SSO.
This is trivial to configure using Basic Authentication, however I would like to use an ASP.NET login form. I would like to avoid writing a security extension as I do not want to perform custom authentication. I would like the web service to use it's built in authentication and authorisation mechanisms.
Is the above possible???
The following gives some more details about wht I've tried.
I have tried configuring the report server/manager with Forms authentication as in the sample but cannot get it to work with out implementing the security extensions.
I changed the web.config files and the policy files for permissioning my dll with FullTrust. I did not configure an extension as I want reporting services to use it's built in windows security mechanisms.
In the login page code behind I call the ReportingService2005.LogonUser() method which always throws the following exception:
Client found response content type of 'text/html; charset=utf-8', but expected 'text/xml'. The request failed with the error message: --
Reporting Services Error
The report server has encountered a configuration error. See the report server log files for more information. (rsServerConfigurationError) Get Online Help
SQL Server Reporting Services --.
I check the log file and it has the following:
at System.Web.UI.Page.HandleError(Exception e)
at System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint)
at System.Web.UI.Page.ProcessRequest(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint)
at System.Web.UI.Page.ProcessRequest()
at System.Web.UI.Page.ProcessRequestWithNoAssert(HttpContext context)
at System.Web.UI.Page.ProcessRequest(HttpContext context)
at ASP.logon_aspx.ProcessRequest(HttpContext context)
at System.Web.HttpApplication.CallHandlerExecutionStep.System.Web.HttpApplication.IExecutionStep.Execute()
at System.Web.HttpApplication.ExecuteStep(IExecutionStep step, Boolean& completedSynchronously)
aspnet_wp!library!18!03/13/2007-11:38:23:: e ERROR: Throwing Microsoft.ReportingServices.Diagnostics.Utilities.InternalCatalogException: An internal error occurred on the report server. See the error log for more details., ;
Info: Microsoft.ReportingServices.Diagnostics.Utilities.InternalCatalogException: An internal error occurred on the report server. See the error log for more details. ---> System.Web.HttpUnhandledException: Exception of type 'System.Web.HttpUnhandledException' was thrown. ---> System.FormatException: Input string was not in a correct format.
at System.Text.StringBuilder.FormatError()
at System.Text.StringBuilder.AppendFormat(IFormatProvider provider, String format, Object[] args)
at System.String.Format(IFormatProvider provider, String format, Object[] args)
at Microsoft.Samples.ReportingServices.CustomSecurity.Logon.ServerBtnLogon_Click(Object sender, EventArgs e) in C:Program FilesMicrosoft SQL Server90SamplesReporting ServicesExtension SamplesFormsAuthentication SamplecsFormsAuthenticationLogon.aspx.cs:line 130
at System.Web.UI.WebControls.Button.OnClick(EventArgs e)
at System.Web.UI.WebControls.Button.RaisePostBackEvent(String eventArgument)
at System.Web.UI.WebControls.Button.System.Web.UI.IPostBackEventHandler.RaisePostBackEvent(String eventArgument)
at System.Web.UI.Page.RaisePostBackEvent(IPostBackEventHandler sourceControl, String eventArgument)
at System.Web.UI.Page.RaisePostBackEvent(NameValueCollection postData)
at System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint)
--- End of inner exception stack trace ---
at System.Web.UI.Page.HandleError(Exception e)
at System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint)
at System.Web.UI.Page.ProcessRequest(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint)
at System.Web.UI.Page.ProcessRequest()
at System.Web.UI.Page.ProcessRequestWithNoAssert(HttpContext context)
at System.Web.UI.Page.ProcessRequest(HttpContext context)
at ASP.logon_aspx.ProcessRequest(HttpContext context)
at System.Web.HttpApplication.CallHandlerExecutionStep.System.Web.HttpApplication.IExecutionStep.Execute()
at System.Web.HttpApplication.ExecuteStep(IExecutionStep step, Boolean& completedSynchronously)
--- End of inner exception stack trace ---
aspnet_wp!library!18!03/13/2007-11:38:24:: i INFO: Exception dumped to: c:Program FilesMicrosoft SQL ServerMSSQL.3Reporting ServicesLogFiles flags= ReferencedMemory, AllThreads, SendToWatson
aspnet_wp!library!1!03/13/2007-11:39:11:: e ERROR: Throwing Microsoft.ReportingServices.Diagnostics.Utilities.ServerConfigurationErrorException: The report server has encountered a configuration error. See the report server log files for more information., Could not load Authentication extension;
Info: Microsoft.ReportingServices.Diagnostics.Utilities.ServerConfigurationErrorException: The report server has encountered a configuration error. See the report server log files for more information.
Am I missing something? Is this even possible? If not, then why isn't it possible?
It feels like I've been going round in circles on something that shouold be pretty trivial to configure.
Thanks in advance.
Adam.
View 9 Replies
View Related
Jun 23, 2006
I've created a custom Data Processing Extension and I've implemented the IDBCommandAnalysis interface so that my reports can enter parameters and pass them to my Data Processing Extension.
My question is, how do I extract the value from the Parameters coming from the report? Where do the parameters get passed off from the report? I can query the Parameters collection and my report gets prompted in Preview mode to enter something for the parameter but I can't find the spot where it gets passed for processing.
View 5 Replies
View Related
Aug 15, 2006
Good Morning..
We're having a heck of a good time trying to implement our first CDE project in SSRS 2005.
In our SDE class library we have included an App.Config file where we want to store configuration settings..
Trouble is that when we view the configuration settings or connection string settings in debug mode, they're not being read for some reason..
Here's our app.config file:
-------------------------------------------------------------
<?xml version="1.0" encoding="utf-8" ?>
<configuration>
<configSections>
</configSections>
<appSettings>
<add key="eventLogName" value="FocusDPEEventLog" />
</appSettings>
<connectionStrings>
<add name="PassConnString" connectionString="Data Source=SOMEDATASOURSE;Persist Security Info=True;User ID=SOMEUSERNAME;Password=SOMEPASSWORD;Unicode=True"
providerName="System.Data.OracleClient" />
</connectionStrings>
</configuration>
-------------------------------------------------------------
Here's what our Immediate window Debugger is tellin' us about our configuration settings:
-------------------------------------------------------------
ConfigurationManager.AppSettings
{System.Configuration.KeyValueInternalCollection}
[System.Configuration.KeyValueInternalCollection]: {System.Configuration.KeyValueInternalCollection}
base {System.Collections.Specialized.NameObjectCollectionBase}: {System.Configuration.KeyValueInternalCollection}
AllKeys: {Dimensions:[0]}<----incorrect should be 1
ConfigurationManager.ConnectionStrings
Count = 1 <----ok, is one, but the wrong 1, see 3 lines down...
base {System.Configuration.ConfigurationElementCollection}: Count = 1
ConfigurationManager.ConnectionStrings[0]
{data source=.SQLEXPRESS;Integrated Security=SSPI;AttachDBFilename=|DataDirectory|aspnetdb.mdf;User Instance=true}<--Should be PassConnString
base {System.Configuration.ConfigurationElement}: {data source=.SQLEXPRESS;Integrated Security=SSPI;AttachDBFilename=|DataDirectory|aspnetdb.mdf;User Instance=true}
ConnectionString: "data source=.\SQLEXPRESS;Integrated Security=SSPI;AttachDBFilename=|DataDirectory|aspnetdb.mdf;User Instance=true"
Name: "LocalSqlServer"
ProviderName: "System.Data.SqlClient"
Now notice the stuff in bold...I have NO IDEA where this gosh-danged thing is reading, but it doesn't seem like it's the app.config file in our class library...
thanks..
Doug
View 1 Replies
View Related
Oct 9, 2007
Hey, I was just wondering if someone could point me in the right direction on an issue. I've got the authentication portion of a custom security extension working properly (while authorization is just sort of giving everyone a pass) and all of my Googling efforts seem to be bearing little fruit. Now that authentication is in place, whenever I try to deploy a report from Visual Studio, it comes up with an error.
The error is that it is getting the authentication html login page set in web.config (as I expected), while it was looking for an xml page. I'm a bit new to this side of things so I'm not really even sure where I should be looking to see what kind of xml page it wants and such.
I don't need anyone to bother explaining the entire thing to me as I should be able to figure it out once I can get a start, but as I said I just need a kick in the right direction because my Google-fu has failed
View 2 Replies
View Related
Jan 4, 2006
Hi, Happy New Year!
I have been struggling with this problem for a while with SQL 2005. I have never had such login problem with SQL 2000. Here is the scenario:
I have installed SQL2005 standard version on a XP Pro box and I am trying to access it from another XP Pro machine. I can access it using a SQL user name and password that I set up on the server, but I have not had luck with using Windows NT Integrated security. When I try to connect to it (e.g. by a UDL file), I get an error saying Login failed for user €˜HP-AMD64Guest€™ where €˜HP-AMD64€™ is the name of the PC running the SQL 2005. I can access the files on the machine without any problem. I do not understand why it uses €˜Guest€™ that is not what I use to log on my machine. Does anyone have any clue to offer me?
Thank you in advance!
h
View 14 Replies
View Related
Aug 30, 2007
Does anyone know if this box will accept VB.Net code or just VB code (old style) .... nothing indicated within the applicaiton IDE ....
Thanks ...
View 1 Replies
View Related
