Reporting Services 2005 And Analysis Services 2000
Jul 30, 2007
Hello,
i have a small problem with the data sources in the reporting services, maybe you can clarify the situation... I have a MS CRM 3 solution with the reporting services 2005 installed. From an other vendor we have a arcplan solution on the 2000 analysis services. I would like to get access from the 2005 reporting services to the 2000 cube. Is this possible? Ive read that the SSMS cant connect to the 2000 cubes. Can i connect from the reporting services??
I'm trying to create reports in RS2005 using AS2000 as my data source. I understand that if I use RS2005 on AS2000, I wont be able to enjoy the OLAP based parameters as in using AS2005. Does anyone know an easy way to easily use Parameters in RS2005 while still using AS2000?
I have some questions about SQL Servers 2000 and 2005 compatibility. In my configuration I have to use both servers. The cubes are stocked in 2005 server. May I transfer from 2005 to 2000 Analysis Services the cubes?
If yes, what is the procedure? The result of migration is the same in the two different versions?
I am trying to migrate my reports from SQL server 2000 reporting services 32bit to 2005 64bit. I am following the migration steps that MS specified. Restored my Reportserver and ReportserverTempDB databases Then I was using the configure Report services to upgrade these databases but I always end up getting the follwoing exception when I run the upgrade on the "Database Setup" configuration for 'ReportServerTempDB' database System.Data.SqlClient.SqlException: Could not locate entry in sysdatabases for database 'ReportServerTempDBTempDB'. No entry found with that name. Make sure that the name is entered correctly. at System.Data.SqlClient.SqlConnection.OnError(SqlException exception, Boolean breakConnection) at System.Data.SqlClient.SqlInternalConnection.OnError(SqlException exception, Boolean breakConnection) at System.Data.SqlClient.TdsParser.ThrowExceptionAndWarning(TdsParserStateObject stateObj) at System.Data.SqlClient.TdsParser.Run(RunBehavior runBehavior, SqlCommand cmdHandler, SqlDataReader dataStream, BulkCopySimpleResultSet bulkCopyHandler, TdsParserStateObject stateObj) at System.Data.SqlClient.SqlCommand.RunExecuteNonQueryTds(String methodName, Boolean async) at System.Data.SqlClient.SqlCommand.InternalExecuteNonQuery(DbAsyncResult result, String methodName, Boolean sendToPipe) at System.Data.SqlClient.SqlCommand.ExecuteNonQuery() at Microsoft.ReportingServices.Common.DBUtils.ApplyScript(String connectionString, String script) at ReportServicesConfigUI.SqlClientTools.SqlTools.ApplyScript(String connectionString, String script)
It's driving me crazy, why is it looking for 'ReportServerTempDBTempDB' in the catalog instead of 'ReportServerTempDB'? Is it possible to migrate from 32bit to 64bit?
I've got a software development PC that was running SQL 2000 + Analysis Services + Reporting Service (sp4 from memory). I then installed SQL Express 2005 and later then SQL 2005 Standard (dev) + Analysis + Reporting and upgraded to Sp2 last month.
To help improve the performance of this poor little PC, I've gone to Control Panel and uninstalled SQL 2000 service. I've also used the SQL 2005 Surface area configuration tool to switch off the SQL Express instance from running. Practically, I probably should remove the $SQLExpress instance.
The problem I'm faced with is the SQL 2000 Analysis and SQL 2000 Reporting service is still registered as Windows Services and showing the the SQL Server Configuration Manager (2005), but there is no uninstall option in the control pannel. So I can't work out how to uninstall these software and services.
It is also apparent that there are a series of "files" in the C:Program FilesMicrosoft SQL Server80* directory like ..ToolsDevToolssamples*.* directory and others that shouldn't really be there if I've uninstalled SQL 2000 via the control panel.
Is there a SQL 2000 cleanup or removal tool that will help remove these old services and files?
Does anyone have some suggestions on how to cleanup my development PC without the full operating system installation?
I think I've seen a similar post on a blog or on the forums - but it seems like this should be possible -
I have an MDX query - that works fine in SQL Enterprise Manager, and has my dimension members on columns, and my measures on the rows. When I try the same query in Reporting Services, I get the error:
"The query cannot be prepared: The query must have at least one axis. The first axis of the query should not have multiple hierarchies, nor should it reference any dimension other than the Measures dimension.. Parameter name: mdx (MDXQueryGenerator)"
Although it works when you pivot the view, I really need my data presented with the members on the columns and the measures on the rows. Another forum post mentioned using the SQL 9.0 driver, but I can't see this listed anywhere (the only one I see is the .NET framework Data Provider for Microsoft Analysis Services).
Here's what my query looks like -
SELECT { [Time].[Month].&[2006-09-01T00:00:00] , [Time].[Month].&[2006-10-01T00:00:00], [Time].[Month].&[2006-11-01T00:00:00], [Time].[Month].&[2006-12-01T00:00:00] } on COLUMNS, { [Measures].[Unique Users], [Measures].[UU Pct 1], [Measures].[UU Pct 2], } ON ROWS FROM [Cube]
Setup: Reporting Services and Analysis Services are on the same server. Active Directory User. Default configuration of Reporting Services.
Problem: Reporting Server does not apply Analysis Services Role after login.
Details:
I have created a report that retreives data from the Analysis Service. I created a role and added my user company/myUserName to the role.
On the Reporting Server I set the data source to :
* Credentials supplied by the user running the report and Use as Windows credentials when connecting to the data source
Internally when I connect devsql2005/Reports/ReportName I get the user and password fields. When I fill them in I get the report but I can see all the data while my role was restricted to see only few results.
Can anyone suggest what may be wrong? Any articles or tutorials on how to setup and deploy solutions where Report Server is talking to Analysis Services and NOT Sql Server.
Hello, I have a problem when trying to fully process an SSAS database using Integration Services "Analysis Services Processing Task" task. I have 2 of these tasks which are responsible for processing the Dimensions then the Cubes. When I run the package either via the BIDS environment or on the local server from the Integration Services engine, I will get an error after about 20 minutes stating:
"Error: Memory Error: Allocation failure. Not enough storage is available to process this command""Error: Errors in the metadata manager. An error occurred when loading the <cube name> cube from the file \?D:Program FilesMicrosoft SQL ServerMSSQL.2OLAPDataMyWarehouse<cube file>.xml"
The cube name is not specific, it will fail and any of my cubes could be in the error log
If I fully process the AS database using the AS engine (logon to local AS server, right-click AS database and click Process), I get no errors at all, it processes and completes fine. The processing options are identical when I run in AS or via the SSIS "Analysis Services Processing Task" task.
I've searched quite a lot online but no joy, the information I have gleaned from various sites does not directly link SSIS with SSAS processing problems.
When either the AS processing starts via SSAS or SSIS the memory usage of MSMDSRV.exe increases to around 1.4 / 1.5 GB but never goes to 2GB ever, even when the error appears.
I've done the following with no effect.
" Have run via AS and works fine " No specific cube it fails on " Have created a Dimension only package, same problem " Changed the maxmemorylimit " Changed the connections to localhost " Memory DOES NOT max out on server
Server Specs: Windows Server 2003 Standard + Service Pack 2 4GM ram, 2GB paging file
i am working in vs.net 2005 (c#.net & asp.net), my application need reporting functionality, for that i am using Sql Reporting Services 2000 in vs.net 2005, and i am not able to generate the report, can any pls tell me how to use sql reporting services 2000 in vs.net 2005 and configuration setting etc...
it would really help more to build my applications in sophisticated way
I have Reporting Services on one server and SQL and Analysis Services on another Server. I can develop a report using Analysis Services as the source from my local machine and it works fine. When I deploy it to the Reporting Services Server, it gives the following error:
An error has occurred during report processing. Cannot create a connection to data source 'DataSource1'. A connection cannot be made. Ensure that the server is running. No connection could be made because the target machine actively refused it
Hello I have been working on reporting services fetching data out of Sql Server. I want to know,if there are any sites than have information on working with MS.Services and Analysis Services together. Analysis Services is something I have no knowledge about.
I have an important question and I've been roaming on MSDN and the internet to find a CLEAR answer. I'm really stuck here.
Is there a way to build a DYNAMIC Report with Visual Studio 2005 (SQL Server Business Intelligence Development Studio) and having a Cube (SQL Server 2005) as datasource?
I want a report that will act as the interface of the Cube browser in Analysis Services. I don't want to give access to the Cube Browser to users, but I want them to be able to drill-through the cube.
How can I get the 2000 and 2005 versions of SQL Server Reporting Servicesboth working on my development laptop ?????I have ASP.NET 1.1 and 2.0 installed on my laptop.I have Visual Studio 2003 and 2005 installed on my laptop.I have my default website configured for ASP.NET 2.0.I have the developer edition of SQL Server 2000 installed on my laptop asinstance RMK006 in the MSSQL folder. I have the developer edition of SQLServer installed on my laptop as instance RMK0062005 in the MSSQL.1 folder.I have the corresponding versions of SQL Server Reporting Services installedon my laptop.I have the Reports web site and the Reports web site and ReportServer website configured to ASP.NET 1.1I have the Report$RMK0062005 web site and the ReportsServer$RMK0052006configured to ASP.NET 2.0Entering http://localhost/reports$rmk0062005 in my web browser works fine.Entering http://localhost/reportserver in my web browser generates thefollowing error:Reporting Services Error--------------------------------------------------------------------------------The report server cannot decrypt the symmetric key used to access sensitiveor encrypted data in a report server database. You must either restore abackup key or delete all encrypted content and then restart the service.Check the documentation for more information. (rsReportServerDisabled) GetOnline HelpBad Data.--------------------------------------------------------------------------------Microsoft Reporting ServicesEntering http://localhost/Reports in my web browser generates the followingerror:The report server cannot decrypt the symmetric key used to access sensitiveor encrypted data in a report server database. You must either restore abackup key or delete all encrypted content and then restart the service.Check the documentation for more information. (rsReportServerDisabled) GetOnline Help Bad Data.The only way I can seem to get 2000 Reporting Services working is to do thefollowing:- run C:WINDOWSMicrosoft.NETFrameworkv2.0.50727aspn et_regiis.exe -u- uninstall 2000 Reporting Services- run C:WINDOWSMicrosoft.NETFrameworkv1.1.4322aspne t_regiis.exe -i- install 2000 Reporting ServicesBut once I've done that Visual Studio 2005 etc no longer work.The utlimate goal is an ASP.NET 2.0 application developed in Visual Studio2005; the application is based on a SQL Server 2000 database and needs toinvoke SQL Server 2000 Reporting Services to run reports.What am I doing wrong?ANY HELP WOULD BE GREATLY APPRECIATED - I'M DIEING HERE AND MY CLIENT ISLOSING PATIENCE !!!!!
Hi friends, i have some questions about Reporting Services 2005:
Can i use RS 2005 with a SQL 2000 Database? Can i create a report with RS 2005 (with a SQL 2K Database) a show it in a webform? What do i need to install (in the webserver and in the Database server) in order to start designing reports in RS 2005 against a SQL 2K DB?Thanks in advance. Regards Eduardo
Is there any way to pass a dataset parameter in RS 2000? Basicly, I have some data in my web page and want to print it. But I don't want to create another page to pass parameters to RS. I want to print the page as it is with the data already in the page, so if there is a way I can send the data through a dataset to the report directly, would be great. Is there?
I am little bit scared that if i upgrade reporting server db to 2005, My report won't work. I just wanna test with some reports in SQL 2005 reporting services.
1) what should i do( I have already installed Reporting services in 2005 (64-bit)? 2) Can i backup Report server db and Report Tempdb database and restore in SQL 2005 but these database already exists in SQL 2005.? 3) If i upgrade these database , Will it effect my 2000 Production Reports?
I'm attempting to obtain a cost effective solution for my existing customers to develop reports on their SQL 2000 Server installations using their Reporting Services 2000. With products like Visual Basic.NET 2003 becoming almost impossible to obtain, I have at least one customer who is running into a dead end.
One option possibly is the SQL Express with Advanced Services download, which has Reporting Services. My questions are as follows:
Can the report designer component of SQL Express Reporting Services be configured to connect to an external database (which would happen to be a SQL 2000 database) to establish its datasets? Does the resultant designed report end up in an RDL file? If the customer published this report via the Reporting Services 2000 Report Manager, would the report be able to run?
Sorry for asking a question like this that I could probably answer on my own, but my customer needed this answer yesterday. I have scoured the web and microsoft sites - and posted a question on the official SQL Reporting Services cateogy ... in an attempt to answer the basic question of how to design reports for Reporting Services 2000 in the absence of Visual Basic.NET 2003 (or other .NET 2003 tools) with no success.
Hello, We want the reporting tool to be integrated with visual studio 2005. From my understanding SQL reporting services 2000 can be integrated only with visual studio 2003 (Please correct me if I am wrong) . Hence we have decided to go for SQL reporting services 2005 I understand that SQL reporting services 2005 can be used with SQL server 2000 database. I want to know if SQL reporting services 2005 and SQL server 2000 database are on a single machine, would a single license for SQL server 2000 suffice or should we have a license for sql server 2005 (since we use SQL reporting services 2005) as well.
I successfully got SQL 2005 Express with reporting services running under VISTA. Developed some reports in the VISTA environment. However, my target system is a Windows 2000 server. We installed SQL 2005 w/reporting services onto the Windows 2000 server. SQL2005 Database is up and running. Reporting Services are running, IIS RRS virtual directories are built, RRS databases are built. I can do everything except deploy reports from Business Intelligent Studio. I can preview reports, just cannot deploy. The Reporting Services indicate 1 failure in its configuration; the Web Service Identity. It is loaded with <server>ASPNET. I cannot get rid of this error. I assume this is the problem. After digging around I found that Windows 2000 does not have an ASPNET user, it uses the IWAM user instead. Reporting services did not run at all till I changed the rs config file and put the IWAM user in as <WebServiceAccount>.
Does anyone have Reporting services 2005 running on Windows 2000 server? Anyone know how to fix the Web Service Identity error I am getting?
Hi, I'm wondering if I can use SQL 2005 Reporting Services with SQL Server 2000, SQL Express or MSDE, or I need to install SQL Server 2005 in order to use Reporting Services 2005? Thank you in advance.
I apologize for not doing the legwork to see if i can answer my own question, but I am close to a loosely planned SQL 2005 migration and don't have time and resources to test my own theories.
Is there a way for a Reporting Services 2000 server to connect to SQL server 2005 databases? I've tried creating a new data source and changing a report to this data source, but it seems like the report is still using the old data source. I'm guessing i might need to register new data providers on the 2000 RS server and then change the existsing data sources.
Is there any way to deploy reports to a Report Manager in SQL Server Reporting Services 2005 if the reports query SQL Server 2000 databases? Or are only 2005 databases able to deploy to the web?
Also, if I have a report that queries both, can I deploy it to the web on the 2005 Report Manager with a linked server to the 2000 server?
Hi, I have just install SQL 2005 SP2 and trying to get Window SharePoint Services V3 integrated with SQL 2005 SP2 reporting services. In SharePoint Central Administration, I select the Reporting Services Integration page and have setup the Report Server Web Service URL and Authentication Mode. I then goto Grant database access, specify the SQL server name, get promted for a username and password that has access SQL Reportserver and get the following error "The group name could not be found" Does anyone have any ideas? Thanks
Are both reporting and analysis services of SQL Server are same or different. I mean if I install reporting services so analysis services is a part of it or do I need to install it separately?
I am asking because when I tried to install Visual Studio Team Foundation Server 2005 it said that I do not have SQL Server 9 Analysis Services installed which is a prerequisite but I do remember that I have installed SQL Server reporting services on the system. So it means Analysis Services has to be installed separately from a different CD?
We're looking at several tools to do reporting and analysis of our SQL 2005 data.
We want to create canned web based reports We want internal - non-developers to create canned reports for our customers We want internal - non-developers to create ad hoc reports We want to slice and dice the data in various way and produce graphs and trend reports - pretty stuff for management
Tools like Business Objects Edge satisfy many of these requirements but we already have SQL 2005 which I understand can do similar things. I can easily get a demo of a companys products to show me what can and can't be done.
Does anyone know how I can get a SQL demo using these services ? I tried contacting Microsoft but didn't get anywhere
I don't have the luxury of time to learn all the benefits and functionality to understand if SQL is the best way to go. Database wise - yes - but Analysis and Reporting ??
Hi, I'm trying to learn about analysis, integration and reporting services. I have install SQL server 2005 management Studio Express. but I cant find these in the Start menu as mentioned in the tutorial Click Start > SQL Server 2005 > Business Intelligence Development Studio.(for reporting services). what do I need to do? Please help me.
I have a cube with 20 dimensions. I have two dimensions with more than one million of members. When I process these dimensions Analysis Services 2000 create files with "axis" extension. What are these files? Why, when I start MSSQLServerOLAPService or when I process another cube in another OLAP database, these files sre updated?
I have a problem with Microsoft Analysis services, we already configure the boot.ini and the registry to use 3GB in RAM, but 2 or 3 times in a day we should restart the services to clean the memory, as you can see that€™s not acceptable. The application that use the OLAP is OutlookSoft . Here the scenery SO. Windows Server 2003 Enterprise Edition with SP 1 RAM 4 GB Analysis services 2000 with SP 4
