I just created a report builder. I have a main report and i wanted to create a sub report. why i cant or i cant view the path or the folder of my .rdl file to be use as my sub report.
View 5 RepliesI am trying to develop a report from cube,and it has one drill through report.when i click on sales amount field on main report,then it open the drill through report with details.Here i passed the **(category,subcat,product)parameters(Cascaded)** to drill through report in action part of main report.In my main report i have two columns .
columns are **Level** and **Salesamount**.
Values are like
**[-]category** **100**
**[-]subcat** **50**
**product** **30**
when i click on 100, parameters are passed & it open the detail report correctly, but when i click on 50,the values for subcat parameter is not getting values in detail report and same as the product also.
Here i used the expressions in parameter values
**pCategory**----iif(inscope(category),!fields.category.value,split(join(Parameters!category.value,","),","))
**psubcat**----iif(inscope(subcat),!fields.subcat.value,split(join(Parameters!subcat.value,","),","))
**pproduct**----iif(inscope(product),!fields.product.value,split(join(Parameters!product.value,","),","))
How do I get data on my linked report based on my grouped subtotal and grand total from the main report. The subtotal and grand total are calculated columns.
I have a 3 columns in my matrix in the SSRS summary report. Actn_COAST, ActnCITY and NumbOfAccts.
The following is code for my summary report. The results are shown below.
SELECT Distinct ActnCITY, Count(ACCT) as NumbOfAccts,
CASE WHEN ActnCITY in ('NY', 'OH', IN, 'NJ', 'SC', 'NC') THEN 'EAST COAST'
WHEN ActnCITY IN ('CA'. 'NV', 'UT', 'WA', 'OR') THEN 'WEST COAST'
ELSE 'OTHER'
END AS Actn_COAST
FROM tbl1
where ACTNDATE between @STARTDT and @EndDT
Code for my detail report contains the following SQL
SELECT * FROM tbl1 where ACTNDATE between @STARTDT and @EndDT AND @ActnCITY = ActnCITY
I have linked my report based on the NumbOfAccts column. I am able to get data if I click any of the NumbOfAccts values related to the state I want. However when I am not sure how to make the subtotal and grand total work. I want when I click on the subtotal of either coast, I should be able to see records of that coast e.g., if I select 37 I should be able to see all the records in East Coast. If I click on the Grand Total, I only want data related to those 2 coasts.
I have a SSRS report with 4 sub reports embedded. Previously i faced a situation where sub reports was getting displayed with static data even if there is no data being pulled from data set. I solved this problem according to solution provided in my previous post here. Now blank space is getting displayed in place of empty sub report. But still the main report that hosts empty sub report (Which has a header with header name coming from main data set) is getting displayed. Is there any way wherein the whole main report can be suppressed when the sub report has no data?
View 3 Replies View RelatedI have 11 records in the Main report.I want to make Imagebutton for only the 11 record.If click on Imagebutton then the subreport show in the below.But there is no relationship between MainReport and SubReport.
View 2 Replies View RelatedI have a report builder drill down report. I have row groups with totals. It looks like the attached. The problem is when the report is not expanded the Grand Totals column is not accurate... it is displaying the totals of one of the rows when expanded.The expression in the Total Show text box is
= Switch (
MID(Fields!protocol_id.Value,1,7)="THERAPY",
Sum(IIF(Fields!status.Value = "CO", CDbl(Fields!TX_CO.Value), Nothing)),
MID(Fields!protocol_id.Value,1,7) = "GENERAL" and MID(Fields!program_id.Value,1,6)
= "INTAKE", Sum(IIF(Fields!status.Value = "CO",
[code]...
Is there any way to not display the expression in the Total columns unless the report is expanded?
I was wondering if there was any way to add a value field to a report, with the time it took for the report to Process.
It would probably be a text field with an Expression, but don't know how that would go.
I know that in Expression there is a value for ExecutionTime (when report began to run), but nothing about when it ends.Can this be done? and if yes, how?
Is there a way to see Report-Level variables in Report Builder 3.0? Also, just as a feedback, it would be really nice if there were a way to see and easily access all of the variables used in a report from one location instead of going to the dataset, the report, and then to the individual groups (if needed) to see the variables. Also, it would be very useful if Group-level variables can show up in the Expression Builder as well.
View 2 Replies View RelatedI've gotten to the point of publishing the new reports on the SSRS server and have run into the following problem.
I use a field in the primary report with the "Go to report" action to open up another report (also published) for more details. It works properly from within ReportBuilder (2.0) using the report server and I can go to and from the secondary report as I expect. Its passing the correct parameters to the second report and its runs.
But when I use the reports from the SSRS web, the Go To link no longer works. Mouse hover shows its still a link but clicking goes no where. I can run both reports independently from SSRS and they still work.
I've tried this in IE and Chrome with no luck in either. I also poked around at Compatability view and popup blocker but nothing made any difference.
I would like to automate a report using Report Builder 3.0. I have limited access to the Reporting Services, so I would like to create a task on my workstation to automatically run the report by clicking one button.
View 6 Replies View RelatedI created a subreport1 with tablix.I created second subreport2 that has a tablix and one column chart and both are placed in a rectangle. No page break is applied to this rectangle. When I run the sub report, both tablix and Column chart are displayed on one page .
I created a main report and added Subreport 1 and Subreport 2 in 2 different rectangles. I set page break property of Rectangle(Subreport1) to End and no page break is applied to Rectangle of Subreport2.
When I run the main report, subreport1 is displayed in one page, subreport2 is displayed in 2 different pages.
I have a main report and 2 sub reports. I would like to pass the total Premium Paid from 2nd Sub report , and Total Bonus received from 3rd Sub report back to main report.
My scenario is actualy much more complicated than what i had attached below, which i cannot join the query for the 3 different reports together. But for demo purpose, i created the following sample scenario.
My main report is to display the sales summary by person by location.
A person may have more than 1 account number, and each account number is entitly for bonuses. As illustrated below.
I've been reading a lot of posts on this subject. I understand that the issue is due to the fact that the subreport is only rendered once. So after the main report is sorted on another column, the cell with the subreport produces an error.
What I want to know is whether or not this is considered a defect. And if it is a defect, is it fixed in another version?
I am currently running SSRS SQL2008R2 SP2 (20.50.4000.0)
How to display the subreport Headers/footers in Main report (in SSRS SQL server 2008 r2)?
View 4 Replies View RelatedHi,
Is anyone using Report Builder via a Report Model generated from Analysis Services in production?
From what I have seen on the Forum people have done this from books, but it is not clear as to whether they have used it at work, in production. There do appear to be reports of some problems with the integration between the two, and with performance.
The attraction of Report Builder on top of Analysis Services is that we should only need to define measures, security, etc, once in the Cube, not twice, as we would if we had to use Report Builder on top of a relational source, alongside Cubes on Analysis Services.
What I would like to find out is:
1) If there is someone who has deployed Report Builder on top of both a relational data source and Analysis Services. If so, which has been taken up best by the users?
2) How does the navigation in Report Builder work with Cubes. It seems a little bizarre in that you can only drill down, never up. Is there any way around this. Do you need to design the Cube specifically to support the Report Model? If so how?
3) The generation of the report model is easy. However, is there any way to control this, or to edit it later?
4) We have had problems with Report Models on relational sources where changes have invalidated the Report Model and all reports built on it. Can similar problems arise, for example, if you change the Cube and then Re-Generate the Report Model?
5) Are there any other issues around Report Builder. The two I have found so far seem to be Hidden Dimensions showing up, and Report Builder not working if measures are defined as non-aggregatable.
6) Are there any other end-user adhoc reporting products which work better with Analysis Services?
Regards
Paul
Hi,
Iam working on Reporting services.
Ive known how to generate a RDl file , which is in XMl format..
can we Retrieve this File.I mean capture the XMl format of and RDL file saved..
Thanks
Sowmya
Hi,
When i select datasource in Report Builder, i am able to see all the available DataSources.
Eg: I have selected one datasource from the list and which has 3 tables(table1, table2, table3) associated to that datasource.
when i drag and drop table1 fields to report, i am not able to see the other 2 tables(table2 & table3)
Is there any property or relationship do i need to maintain?
Thanks,
SR.
I have got a sql query and converting a Crystal report to Sql report but struggling on few places.When I created the report I need to have a column where I am struggling to figure out how to add this to the column
"if {Clocked_In} = "Y" then
"Yes"
else
if {This} then "Holiday"
else if {Sick} then "Sick"
else if {Absent} then "Absent"
else "No"
"In Crystal four columns make into one but I am not sure how can I do it in SQL report builder.
I am creating custom reports from TFS data in Report Builder 3.0. What I am trying to do is make it possible to run the report and then filter on something and only display those results. For example.. I have created a report with Project Name, Deployment Dates.
The report returns all the project names with a particular type of work item with a planned release date. I would like to be able to drop down and select a particular project name and only display results from that project. By default, I do want all the projects to display but want the possibility to select a specific project.
Do I go to dataset properties of the project name field and add an expression under the filters section?Do I also need a parameter?
i am using Microsoft Sql Server 2008 Report buider 3.0. and i generated report and that report how to use custom variables.
View 2 Replies View RelatedI have VS 2013 Express and SQL Server 2014 (dev. license). I've created some projects in VS where I connect to SQL 2014 Dbs with stored procedures, functions, the usual suspects. Additionally I have Report Builder 3.0. I downloaded and installed SSDT-BI but it doesn't seem to like my VS2013 Express projects any more than I, evidently, like it. So I'm at a loss to understand how to use it to generate reports I can putt on the server and call with my projects. In short, I absolutely don't understand this stuff.I think I want to write reports using Report Builder 3.0 that I can save to my SQL Server Report Server and run from a VS2013 Express Project.
View 10 Replies View RelatedI am using SSRS 2008. I have 3 applications specific reports deployed to reporting manager..AAA , BBB and CCC - be my Applications for example.i have 3 different application users. i want to grant access the respective application users to access respective reports.i mean application user A should not be able to access/view reports from BBB and CCC. similarly for B and C application users.HOw this can be implemented ?
View 2 Replies View RelatedSome textbox are great moving, and need to when the box above gets extra data.. but how do a stop one from moving? make it stay right where I put it.
A stays where it is... for some reason. but B doesnt? it moves down according the textboxes to the left (where is says phone) ...
I typically use Report Designer, but I have a new project requiring Report Builder 3.0. In Report Designer (BIDS), I can take more complex expressions (ie SWITCH with 5 or 6 options), and put each pairing on a new line to be able to better read the code.
In the Expression Editor in Report Builder, pressing the ENTER key on my keyboard closes the Expression dialog box and saves the changes.
Is there any way to add line returns in the code to make it more readable? The expression editor wraps when it runs out of room, but this doesn't make it more readable, in some cases, it wraps in the middle of a field name, making it even less readable.
The 2012 version also has this same "feature".
In Report Builder 1.0 you could drag a column to a filter and see the data before select the values for the filter.I can't find a way to do that in report builder 3.0. is it possible to see the data of a column in Report builder or SSRS?
View 3 Replies View RelatedI am building reports based on Report Builder and SQL server 2014.
Our report data are hosted on azure sql database.
Date time on azure are stored as UTC.
When I run my report locally, how can I format correctly the date/time format on my report in order that if I am in French, I should have the date/time set to UTC + French offset. How can I do this ?
I have a report that should read values from 2 dataset by Currency:
Dataset1: Production Total
Dataset2:Net Total
Ive tried to use Lookup(Fields!Currency_Type.Value, Fields!Currency_Type1.Value,Fields!Gross_Premium_Amount.Value, "DataSet2"), it returns only the first amount from dataset2
Ive tried Lookupset function also but it didnt SUM the retrieved values.
We can see the chinese language without any problem.However, when I open the upper report on my Report Builder, the chinese words are broken looks like below.This symptom happens after windows10 upgrade from window7 , once I use windows7 , there was no problem to see report builder.
View 3 Replies View RelatedI have an application that uses SQL Report Builder to edit templates. When I go to add a dataset to add a custom field to the report, I get a permissions error (screenshot Error). When I check the credentials for the shared datasource, they are all grayed out, so I can’t verify the credentials being used (screenshot Error 2). According to SQL Management Studio, the user credentials have the right permissions. The weird thing is, I can access the datasets and shared datasource embedded in the report just fine. I just get a permissions error whenever trying to create a new dataset.
View 2 Replies View RelatedI have an stacked chart with line with markers. The scale on the right side is the finished good which has a min qty of 383 while the highest is 52439. how can i set this scale that start from 0 to 300 and soon. right now under scale properties I set the max to 60000, the min is set to auto while in the interval properties i set this to 10000. How this line marker adjust the scale quantity (fisnished good).
View 2 Replies View RelatedI have a matrix table with row groups of a date and addresses and also a column group which produces 3 columns and values with in these column.I have a "Total" column based on a Count of the column groups which gives a number.How do you hide all rows where the "Total" column is less then 1? There will be results which still needs the date and addresses groups.
View 2 Replies View RelatedFor my report I am trying to display images that are pulled from a database. Images are from separate records. I have the records I need in a dataset and now I want to set a Table Cell value to the field corresponding to the image. However, the next images/(records) are displayed on the next row (as expected i guess). How do I set the the records/values to be displayed across a single row?
What I have:
image1|
image2|
image3|
What i want:
image1|image2|image3|etc...
I have created two stored procedures.....
1) atmWonOpportunities_Users
2) atmWonOpportunities_Data (startdate and enddate parameters)
In (1) I created a filtered list of all user names associated with a certain business unit and saved it to a temp table.
in (2) I create a filtered query listing all won opportunities during a period of time (date start and date end paramters)
In the report, I have 3 parameters, startdate, enddate and username (dropdown list).
When I run the report I select a startdate, enddate and username. I click the View Report button and get the same results for any one of the usernames I pick which is wrong.