I was asked to add a subreport in my report footer so that it appears on every page of the report. I spent some time trying to figure it out or find an answer on the web, but it appears it can not be done.
View 4 RepliesI have a group in my report that contains an empty footer row to get a better visibility. Because the row has a frame it should be hidden if its the last row on the page. How can I manage that?
View 4 Replies View RelatedReport in question is an invoice form. It requires an absolutely bottom-of-page aligned footer that has databound elements. This is so that whatever page that footer finally appears on will print in such a way that the address will align in a windowed envelope. Ironically, Books Online gives this exact scenario in explaining headers and footers in SSRS, but they cleverly don't explain how an absolutely bottom-of-page-aligned and data-bound footer can be made to happen. Headers at absolute page top is obviously no problem. Footers at page bottom, not so much.So, this is not a "page footer"--page footers are employed in the body. Also this footer is databound, so a page footer as it's known in SSRS is out the window anyway.
Most of the time this will print on a single page, but if it breaks to multiple pages, that footer needs to go all the way to the absolute bottom.I grasp that the "report footer" for SSRS is just what appears at the end of any repeating controls that you've implemented in your body. Because SSRS uses this kind of repeating-control based idiom rather than a section-based idiom as Crystal does, this kind of (what I would consider very basic) positioning control is looking fairly impossible right now.Among what I've tried:
--Page footer (can't; databound)
--Specifying a page break after the pre-footer controls, and/or a page break before the controls that make up the footer in their properties. This leads to unpredictable results with blank printed pages (as many as 8 for what previews as a 2-page report, how silly is that?).
--Putting in a page-height rectangle as part of the footer (with and without the page breaks mentioned above), with the idea of forcing a basically blank page at the end of the report so that the footer will go to the bottom. SSRS will go ahead and break the page anyway on long elements like that, which again leads to the "footer" being printed in the middle or top of the final page, or whereever it happens to fall.
I may be having to explain to my client that you can't get there from here, and they may have to redesign their report.
Hi All,
I am having a main report having two subreports, say M1,S1 and S2 respectively.
The issue is S2 normally tend to go beyond one page, for all pages except first page of the of the subreport I am getting the page header and footer blank,
Actually this is not loading the ReportItems that are used in main report but it shows text boxes containing strings for eg . "My Name" and date functions eg Today()
Any Solution?
Thanks and Regards
Pragash
I want to toggle the visibility of a report item in my page footer based on whether or not a particular subreport has been rendered.
The report has 3 subreports. The subreport above the subreport in question can span several pages, so the subreport I want information on can render on page 1 (for a short report) or page 12 (for example) on a longer report.
Is there a way to determine within the main report when a particular subreport has been rendered and is currently visible?
Thanks in advance for all replies.
John
We have the customer requirement to display the footer of a SSRS Report fixed at the absolute bottom of a DIN A4 format page. The footer contains information like company address and stuff.
I searched quite a while on this topic and only found workarounds for SQL Server 2005 with Custom Code in the SSRS Report to calculate the size of the body content and then insert some empty lines to get the space needed to push the footer to the bottom of the page. But this won't work in SQL Server 2012. And I wasn't able to figure out how to achieve this yet.
I am trying to create a report with a sub report in Sql Server 2012 using Report Builder Version 3. Â I can run the subreport without any problems. Â I read where using a shared connection can cause this error so both the main report and the subreport use a connection that is embedded in my report. Â
For testing, I created the subreport without a parameter and added it to the main report. Â When I ran it that way, the report worked and sub report displayed the data. Â So I know it can read from the database.It seems to only give me this error when I am trying to tie the two reports together using a parameter. Â
Using SSRS 2014 and VS2013 rc5.
How do I hide a subreport if the parent report row containing the subreport is a certain value? I am attempting to create a statement with ageing buckets. In the main body of the report I have to display payments and invoices. If the invoice row is blank, I need to hide the row containing the subreport.
First, Is this even possible?
Second, How?
I currently have an Ungrouped Dataset being displayed in a Table. One of the columns include AMOUNT.
This is an example of what my report looks like atm:
==================
**Report Name**
No Name Amount
Signed By XXXX
==================
I would like to display a SUBTOTAL of the Amounts for each page and, on the final page, a TOTAL of the Amounts.
Yes the Last Page's SubTotal and Total will be the same.
Looking like:
===============================
pg1
**Report Name**
No Name Amount
Sub Total Amount
Signed By XXXX
(lastpage)
**Report Name**
No Name Amount
(<-----no huge spaces between Table/Subtotal)
Sub Total Amount
Total Amount
Signed By XXXX
=================================
Issues:
I've found a way to get a Page's SubTotal, but the way I found requires this to be put in a field on the Page Footer Section.
This means that on the final page, the SubTotal will be at the top of the Page Footer and not neccessarily directly beneath the table.
So:
1. Is there a way to move the Page Footer so that its printed DIRECTLY under neath the Page Body instead of at the bottom of the Page?
2. If not, is there a way to have the SubTotal of each Page and a Final Page Total in the Page Body section.
Cheers.
I have created one reports but all the records are displaying on one page.find a solution to display the records page by page. I created the same report without group so the records are displaying in page by page.
View 3 Replies View RelatedI had to create an invoice report, where there is a stub on the buttom of the last page.
I need a report footer and RS does not have it.
I talked to Microsoft about it, here is the full emails between me and Microsoft.
hope this helps
Read from buttom to top
--------------------------------
Hi Ronnie
Sorry I was late in getting back to you as I was out of the office in the last couple of days
I made some checks and it seems the problem that you have is a genuine one.
The workarounds that you specified are the only solutions available now.
I checked with the development team and even though they are aware of the problem, they told me that there won€™t be changes to fix it in SQL 2008
So you have to decide on one of the workarounds that you specified
Best Regards,
Hi Tamer,
I wonder if you had any updates on our issue with RS2005.
Thanks,
Thanks for your help on this issue, I am going to more research on your solution (moving the footer to the body).
Meanwhile, I be looking forward for your sample as well.
Thanks again for all your efforts.
Ronnie Peretz
Hi neil
I think there is a way to implement your need in Reporting Services
Reporting Services has a free form designer which means that whatever you put on the report will appear in the same order in the final view. This is why we don€™t have a report footer.
Instead of putting the stub in the footer, just put it after the last item.
You can use a list dataregion to make sure that the stub will always appear at the bottom of the page in the expected location
Ronnie, I hope that solves your problem
Contact me directly if you need more info on how to implement this
Best Regards,
Tamer Farag
Here are all the facts I learned about Reporting Services "Report Footer" limitations and workaround I have tried.
Objective: On the last page of an invoice at the bottom of the last page have a stub of the invoice:
Issue: Reporting Services does not support Report Footer only Page Footer. (http://forums.microsoft.com/MSDN/ShowPost.aspx?PostID=1439673&SiteID=1)
Work around that I have tried:
Work around 1:
I have created a page footer with a rectangle and set the Visibility expression to =Globals.PageNumber < Globals.TotalPages
Results: The page footer did show up only in the last page, but created a block of space in the first pages.
I was trying to see if there is a way to suppress the spaces from the first pages, and found out it's not supported in Reporting Services
This behavior where the report body would consume the space of the empty page header & footer is currently not supported.
-- Robert (http://forums.microsoft.com/MSDN/ShowPost.aspx?PostID=340650&SiteID=1)
Work around 2:
I tried to fit all the footer objects in the rectangle in a very small height range, hoping it will auto grow at run time. That did not work as well.
The textboxes did auto grow, but the Rectangle object or the Page Footer itself does not auto grow, cause to cut the footer information.
Work around 3:
Set the property on the page footer PrintOnFirstPage to False, and PrintOnLastPage = True, Reporting services does print the footer in pages in between.
works great for reports that have only 2 pages, but not not more then 2 pages
Best workaround:
Instead of having a space block at the bottom of each page, have a marketing text on every page except the last page
I had overlap a textbox on top of the rectangle (in the page footer) and having this expression on the Visibility =Globals.PageNumber = Globals.TotalPages.
For most of the invoices which are one page, that text will not show up and the Invoice stub will show up
For Invoices which are two pages or more, the marketing text will show up in the first pages only and in the last page the Invoice stub will show.
note: this workaround cause a warning saying "Overlapping report items are not supported in all renderers."
but it is supported for PDF.
In Visual Studio, when previewing a report with a footer that has two rows of text, the footer appears to display correctly. When I export to Word, the footer for the first page looks as if it has shifted down slightly and the second line is missing. Subsequent pages show the footer correctly.
View 2 Replies View Related Hi All,
I have a table report which has 10 fields as cols.The last 2 fields come from 2 diffrent subreport, having a single field each. There are also 2 groups in this table. I have to limit the rows by checking each cell in a group is 0. If all the cells have got a 0 then hide the row. I can check for all the cells except the last 2(Subreport).
Since the last 2 cells has only got 2 subreports instead of a textbox( as it is the case for the remaining 8 cells), i don't know how to check for data returning from a subreport. For all the other textboxes i have checked it as ReportItems!textbox1.value=0
Can anyone help me with this Please?
Thanks & Regards,
Payal
I'm new to Reporting Services 2005. I have a sales report that displays monthly sales figures for a sales rep. I have a subreport that displays a single cell with a value that I then need to subtract from my monthly sales figure for an adjusted total. Is there no way to return a value from a subreport? I've done this using Crystal Reports before and I've looked for hours on end on the web for a RS solution. I can't believe I'm the only one that ever needed this.
View 13 Replies View RelatedI don't know what am I doing wrong in this piece of code.... cannot seem to get around this.
="javascript:void(window.open('"+Globals!ReportServerUrl +"/Pages/ReportViewer.aspx?"+Globals!ReportFolder+"/"+Parameters!SubreportName.Value+ "?Param1="&Parameters!Param1.Value.ToString()+ "&Param2="&Parameters!Param2.Value+ "','_blank'))
Basically, I'm trying to open a subreport using ActionURL but stuck this js.
It opens up the root folder rather instead of report...Â
I also referred this post:Â [URL] ...
Version - SQL Server 2008R2
Is there any way or option to get the all columns of dataset added to table when we add a table in data region. It will take lot of time to add one by one and also there are chances to add one column ore than once.
View 7 Replies View RelatedI have a report with multiple tables. I need to show each tables in different pages. When there is no data for tables/tables , it is coming with the next table which has data. I have given "Add a page break after" option in the tablix but still the tables are coming together when no data available. How can I show it in different page?
View 2 Replies View RelatedHow do I add a hard page break in the middle of a two page report? I use Microsoft reports for windows.
View 5 Replies View RelatedI have used SSRS to develop several dashboards for use with Microsoft CRM.Â
This works very well:Â the main dashboard page contains a table with subreports in the table cells.Â
Some of those subreports show reports containing other subreports, and so on.Â
Drilldowns into detailed lists and into the CRMÂ entities are popup windows.
The problem I’m having now is with a report that is supposed to show the viewers their planned and completed activities on a week-by-week basis. They see a week at a time, and by pressing Next and Back arrows they can see their next and previous weeks’ information.
I need this subreport to refresh in place on the main dashboard page when they change weeks. I’ve tried putting jump-to-report actions and jump-to-url actions on my Next and Back arrow objects, but everything I try opens a new window. Â
I want the main dashboard to stay accessible, but I don’t want to have to redisplay the whole dashboard page, because that would rerun all of the reports’ queries and take unnecessary time. The only query that needs to be rerun is for the one subreport I’m refreshing.
Any way to refresh a subreport within the parent report?
I ran into this a few weeks ago and found that several others had as well, but no one had yet found an answer. I found the answer (at least one of the answers) this weekend and wanted to share it. I had recently added a subreport to a group footer in a table and started getting an error. Depending on the data, the error wasn't always present. I didn't have a problem when I moved the subreport to any other area in the report.
Here is the error I was getting:
An error occurred during local report processing
An internal error occurred on the report server. See the error log for more details.
It was a local report (rdlc), so naturally, there was no error log <g>. I added an event handler for ReportError and collected this information:
7/23/2006 5:18:22 PM
OS: Microsoft Windows NT 5.1.2600 Service Pack 2
*** EXCEPTION ***
Message: Exception has been thrown by the target of an invocation.
Source: mscorlib
Stack Trace: at System.RuntimeMethodHandle._InvokeMethodFast(Object target, Object[] arguments, SignatureStruct& sig, MethodAttributes methodAttributes, RuntimeTypeHandle typeOwner)
at System.RuntimeMethodHandle.InvokeMethodFast(Object target, Object[] arguments, Signature sig, MethodAttributes methodAttributes, RuntimeTypeHandle typeOwner)
at System.Reflection.RuntimeMethodInfo.Invoke(Object obj, BindingFlags invokeAttr, Binder binder, Object[] parameters, CultureInfo culture, Boolean skipVisibilityChecks)
at System.Delegate.DynamicInvokeImpl(Object[] args)
at System.Windows.Forms.Control.InvokeMarshaledCallbackDo(ThreadMethodEntry tme)
at System.Windows.Forms.Control.InvokeMarshaledCallbackHelper(Object obj)
at System.Threading.ExecutionContext.runTryCode(Object userData)
at System.Runtime.CompilerServices.RuntimeHelpers.ExecuteCodeWithGuaranteedCleanup(TryCode code, CleanupCode backoutCode, Object userData)
at System.Threading.ExecutionContext.RunInternal(ExecutionContext executionContext, ContextCallback callback, Object state)
at System.Threading.ExecutionContext.Run(ExecutionContext executionContext, ContextCallback callback, Object state)
at System.Windows.Forms.Control.InvokeMarshaledCallback(ThreadMethodEntry tme)
at System.Windows.Forms.Control.InvokeMarshaledCallbacks()
at System.Windows.Forms.Control.WndProc(Message& m)
at System.Windows.Forms.ScrollableControl.WndProc(Message& m)
at System.Windows.Forms.ContainerControl.WndProc(Message& m)
at System.Windows.Forms.UserControl.WndProc(Message& m)
at System.Windows.Forms.Control.ControlNativeWindow.OnMessage(Message& m)
at System.Windows.Forms.Control.ControlNativeWindow.WndProc(Message& m)
at System.Windows.Forms.NativeWindow.DebuggableCallback(IntPtr hWnd, Int32 msg, IntPtr wparam, IntPtr lparam)
at System.Windows.Forms.UnsafeNativeMethods.DispatchMessageW(MSG& msg)
at System.Windows.Forms.Application.ComponentManager.System.Windows.Forms.UnsafeNativeMethods.IMsoComponentManager.FPushMessageLoop(Int32 dwComponentID, Int32 reason, Int32 pvLoopData)
at System.Windows.Forms.Application.ThreadContext.RunMessageLoopInner(Int32 reason, ApplicationContext context)
at System.Windows.Forms.Application.ThreadContext.RunMessageLoop(Int32 reason, ApplicationContext context)
at System.Windows.Forms.Application.Run(Form mainForm)
at SX.MainProgram.Main() in C:Documents and SettingsMYeagerMy DocumentsVisual Studio 2005ProjectsSXSXMainProgram.cs:line 22
*** INNER EXCEPTION ***
Message: Reporting Service Exception
Source: SX
Stack Trace: at SX.ReportSalesForm.reportViewer1_ReportError(Object sender, ReportErrorEventArgs e) in C:Documents and SettingsMYeagerMy DocumentsVisual Studio 2005ProjectsSXSXReportFormsReportSalesForm.cs:line 84
at Microsoft.Reporting.WinForms.ReportViewer.OnError(Exception e)
at Microsoft.Reporting.WinForms.ReportViewer.UpdateUIState(Exception e)
at Microsoft.Reporting.WinForms.ReportViewer.OnRenderingCompleteUI(ProcessThreadResult result, PostRenderArgs postRenderArgs)
*** INNER EXCEPTION ***
Message: An error occurred during local report processing.
Source: Microsoft.ReportViewer.WinForms
Stack Trace: at Microsoft.Reporting.WinForms.LocalReport.InternalRender(String format, Boolean allowInternalRenderers, String deviceInfo, CreateAndRegisterStream createStreamCallback, Warning[]& warnings)
at Microsoft.Reporting.WinForms.LocalReport.InternalRender(String format, Boolean allowInternalRenderers, String deviceInfo, String& mimeType, String& encoding, String& fileNameExtension, String[]& streams, Warning[]& warnings)
at Microsoft.Reporting.WinForms.ProcessingThread.ProcessThreadMain(Object arg)
*** INNER EXCEPTION ***
Message: An internal error occurred on the report server. See the error log for more details.
Source: Microsoft.ReportViewer.Common
Stack Trace: at Microsoft.ReportingServices.Diagnostics.Utilities.RSTraceInternal.Assert(Boolean condition, String componentName)
at Microsoft.ReportingServices.ReportProcessing.Persistence.IntermediateFormatWriter.WriteVariant(Object variant, Boolean convertDBNull)
at Microsoft.ReportingServices.ReportProcessing.Persistence.IntermediateFormatWriter.WriteScopeTableValues(Object value)
at Microsoft.ReportingServices.ReportProcessing.Persistence.IntermediateFormatWriter.WriteScopeTableValues(Object value)
at Microsoft.ReportingServices.ReportProcessing.Persistence.IntermediateFormatWriter.WriteScopeLookupTable(ScopeLookupTable scopeTable)
at Microsoft.ReportingServices.ReportProcessing.Persistence.IntermediateFormatWriter.WriteSubReport(SubReport subReport)
at Microsoft.ReportingServices.ReportProcessing.Persistence.IntermediateFormatWriter.WriteReportItem(ReportItem reportItem)
at Microsoft.ReportingServices.ReportProcessing.Persistence.IntermediateFormatWriter.WriteReportItemList(ReportItemList reportItems)
at Microsoft.ReportingServices.ReportProcessing.Persistence.IntermediateFormatWriter.WriteReportItemCollection(ReportItemCollection reportItems)
at Microsoft.ReportingServices.ReportProcessing.Persistence.IntermediateFormatWriter.WriteRectangle(Rectangle rectangle)
at Microsoft.ReportingServices.ReportProcessing.Persistence.IntermediateFormatWriter.WriteReportItem(ReportItem reportItem)
at Microsoft.ReportingServices.ReportProcessing.Persistence.IntermediateFormatWriter.WriteReportItemList(ReportItemList reportItems)
at Microsoft.ReportingServices.ReportProcessing.Persistence.IntermediateFormatWriter.WriteReportItemCollection(ReportItemCollection reportItems)
at Microsoft.ReportingServices.ReportProcessing.Persistence.IntermediateFormatWriter.WriteTableRow(TableRow tableRow)
at Microsoft.ReportingServices.ReportProcessing.Persistence.IntermediateFormatWriter.WriteTableRowList(TableRowList rows)
at Microsoft.ReportingServices.ReportProcessing.Persistence.IntermediateFormatWriter.WriteTableGroup(TableGroup tableGroup)
at Microsoft.ReportingServices.ReportProcessing.Persistence.IntermediateFormatWriter.WriteTable(Table table)
at Microsoft.ReportingServices.ReportProcessing.Persistence.IntermediateFormatWriter.WriteDataRegion(DataRegion dataRegion)
at Microsoft.ReportingServices.ReportProcessing.Persistence.IntermediateFormatWriter.WriteReportItem(ReportItem reportItem)
at Microsoft.ReportingServices.ReportProcessing.Persistence.IntermediateFormatWriter.WriteReportItemList(ReportItemList reportItems)
at Microsoft.ReportingServices.ReportProcessing.Persistence.IntermediateFormatWriter.WriteReportItemCollection(ReportItemCollection reportItems)
at Microsoft.ReportingServices.ReportProcessing.Persistence.IntermediateFormatWriter.WriteReport(Report report)
at Microsoft.ReportingServices.ReportProcessing.Persistence.IntermediateFormatWriter.WriteReportSnapshot(ReportSnapshot reportSnapshot)
at Microsoft.ReportingServices.ReportProcessing.ChunkManager.SnapshotChunkManager.SaveReportSnapshot(ReportSnapshot reportSnapshot)
at Microsoft.ReportingServices.ReportProcessing.ProcessingResult.Save()
at Microsoft.Reporting.LocalService.Render(PreviewItemContext itemContext, Boolean allowInternalRenderers, ParameterInfoCollection reportParameters, IEnumerable dataSources, DatasourceCredentialsCollection credentials, CreateAndRegisterStream createStreamCallback, ReportRuntimeSetup runtimeSetup, ProcessingMessageList& warnings)
at Microsoft.Reporting.WinForms.LocalReport.InternalRender(String format, Boolean allowInternalRenderers, String deviceInfo, CreateAndRegisterStream createStreamCallback, Warning[]& warnings)
This wasn't exactly enlightening, an exception in an ASSERT in the reporting services dll, but since I knew that results varied with different data, I tracked it down that way.
THE SOLUTION:
The problem occurs when data for group expression is null. If there is no subreport in the group footer, this isn't an issue, but if there is, you get the error. For instance, if your data comes from a SQL statement with a LEFT OUTER JOIN (as mine did), and the group expression uses a column that contains nulls as a result of the LEFT OUTER, this exception will be thrown. This one was VERY DIFFICULT to track down, but it's easily reproducable. It has nothing to do with what (if anything is) on the subreport, what the data the subreport uses looks like, whether there are parameters or not. It's purely having nulls in the data used by the group expression for the main report. I found that if I changed my SELECT from mytable.mycolumn to ISNULL(mytable.mycolumn, 0) the error went away.
Mike Yeager
I have a report with tablix. when tablix returns no rows Footer is coming all the way up . How to display the footer at the bottom of the page all time.
View 0 Replies View RelatedI build a long report in sql reporting(5 pages)
It has many lists.
on the 3rd page it is inserting a blank page with just the report header
I check the list before and after the page
Insert Page break before and after is "unchecked" on both the list and its grouping.
Is there anything else I can verify to find a solution to print no blank pages. The client will have my head if it is there.
Nick
I have two reports 'Product Details' and 'Sales by Product'
When i click on 'Product ID' field in 'Product Details' report, It has to drill through to 'Sales by Product' which has a parameter 'Product ID' in it.Â
I have written the following javascript
="javascript:void(window.open('http://servername/Rportserver/Pages/Report.aspx?ItemPath=%2fTestDrillThru%2fSales+By+Product&rs:Command=Render&ChildProductID="& Fields!ProductID.Value &"','_blank',',resizable=1,width=1600,height=800,left=50'))"
When i drill through, field value is not passing to 'child product id' in sales by product. I have to give the value again in child report.
Is there a way to display a friendly message if a sub-report does not have content ex "No additional products available"...
View 2 Replies View RelatedPresently I have a main report and subreport, with the subreport having values for a carbon copy contact, which when it is displayed it shows these values:
Â
Peter Piper    #Error    #Error   peterpiper@mycompany.com    #Error
Donald Duck   #Error    #Error   donaldduck@mycompany.com   #Error
etc.
Â
When I run the subreport directly, it correctly returns all the values:
Â
Peter Piper    123-345-6789    Calgary   peterpiper@mycompany.com    T
Donald Duck   987-654-3210    Calgary  donaldduck@mycompany.com   F
Â
Here are the details on SQL Server 2008:
Â
Microsoft SQL Server 2008 (SP2) - 10.0.4064.0 (X64)  Feb 25 2011 13:56:11  Copyright (c) 1988-2008 Microsoft Corporation  Standard Edition (64-bit) on Windows NT 6.0 <X64> (Build 6002: Service Pack 2)Â
Â
why the #Error is showing up the the main report?
I have a main report and 2 sub reports. I would like to pass the total Premium Paid from 2nd Sub report , and Total Bonus received from 3rd Sub report back to main report.
My scenario is actualy much more complicated than what i had attached below, which i cannot join the query for the 3 different reports together. But for demo purpose, i created the following sample scenario.
My main report is to display the sales summary by person by location.
A person may have more than 1 account number, and each account number is entitly for bonuses. As illustrated below.
I have two reports.
1. Main Report
2. Sub Report.
I have cascading parameters in 'Main Report'. When i try to pass cascading parameters in to sub-report, I could pass only 'first parameter' value to sub-report.Is there a way that i can pass cascading parameters to the child report?
Hi all
I have a problem which I am really struggling with. I have a report that normally spreads over three pages. We have a list setup so that for each customer it picks up fees and expenses and displays it in sections. We have a page break after FEES so that expenses start on a new page. FEES and expenses are tables.
We need to have a page footer set for the bottom of the report but to appear on the first page only per customer. I.e. we do not want it showing on the EXPENSE pages. We have played with the IIF command but can not seem to print htis per customer only by using global variables.
=IIf(Globals!PageNumber=1,"(Please note 30 day invoice period)
The example above however only prints on the first page of the entire report. So if three customers appear then this will only appear for the first customer and I have a feeling I may not be able to link this to list.
If I can not use a page break and enter this into the list then I have a problem with the text field moving up and down depending on the size of the FEE section. For example if 5 fees are brought back then the text field will be lower then a customer that has only 2 fees.
I after a solution that can either allow my page fotter to appear every time a new customer appears on a page and hiddern for the sub sheets. Or the ability to allow my text field to start at a fixed position on my report. Has anyone had a similar issue.
thank you
Michael
Is it possible to force the content of the page footer to always display at the bottom of a report? I have a report that shows customer orders. It has its interactive height set to 5 inches. There is one customer order per report page. Most of the reports don't require 5 vertical inches (but some do).
How can I make sure that the stuff in the page footer (date, page number, etc.) always gets rendered in the same position for each report? Currently, the page footer follows the last detail line so the footer information sometimes is only midway down the report page.
Thanks.
BCB
I've been reading a lot of posts on this subject. I understand that the issue is due to the fact that the subreport is only rendered once. So after the main report is sorted on another column, the cell with the subreport produces an error.
What I want to know is whether or not this is considered a defect. And if it is a defect, is it fixed in another version?
I am currently running SSRS SQL2008R2 SP2 (20.50.4000.0)
I have a SSRS report in which we have a subreport i am trying to hide the link in excel after exporting from report documents, in report my logic is working fine but when we are deploying in SharePoint application then it is not working. Report is not opening.
View 2 Replies View RelatedHow to display the subreport Headers/footers in Main report (in SSRS SQL server 2008 r2)?
View 4 Replies View RelatedI am exporting SSRS report to Excel I am aware that excel doesn't show footer , It shows in print preview but my footer has text box which have text disclaimer more than 255 characters, the data getting truncated.
View 3 Replies View Related