Is it possible to have the value labels always on top of the bars of a bar chart?
On the Chart Series Labels properties under Appearance, I used Top for Position, but if the bar reaches the top of the chart area (and that is determined automaticaly by the Y Axis that and can't be a fixed value).
I have a report designed in SSRS 2008 R2.My issue is that the data labels do not stay outside the bars for high values.
View 4 Replies View RelatedA customer would like to show speech bubbles with a short text above some bars in a bar chart (similar to the image shown below). Is this possible with SSRS?
View 7 Replies View RelatedSome labels such as 33314 are displaying over the columns. I need all labels to display at the top. How can I fix this without changing the size of the chart?
View 4 Replies View RelatedI am counting order type by a field which can have 3 different values.In a stacked column chart I am displaying the count of those different values, and showing a data label with the count for each order type. See screenshot.
Now I would like to show a line based on the total of each order type. I can see that SSRS already know the number of each order type as it is shown in the labels.
How do I add those numbers (shown in the labels) together and get it into a Total field? I would prefer not to alter my SQL query, if possible.
What is the best optimised options to display the date labels with bi-weekly intervals starting date Date from one month to three months future from the current date?
As per above requirements, I have built the below line graph query and graph, currently it only displays the date labels as per data but I need to display date labels with bi-weekly intervals starting date from one month to three months future from the current date. Also another issue found, if there are few more date labels then does not show all labels on horizontal axis.
Select
/* Set Week End date as Sunday */
DATEADD(DAY, 7 - DATEPART(WEEKDAY, t.TaskBaseline0FinishDate), CAST(t.TaskBaseline0FinishDate
+1 AS DATE)) as[WeekEnd]
,count(t.TaskBaseline0FinishDate) as Baseline
,count(t.TaskFinishDate) as Finish
[Code] .....
I developed a rdlc report. I have a graph chart. Sometimes the value of a label can =0. If the value =0 I want to hide the labelname. However, I also have dummy values =0. This is so that I can have spaces between the bars. The dummy values labels isn't shown in the graph. This works great. I need to add to the expression that if the name of the label isn't dummy but the value =0 to hide the labelname.
The data from sql:
Expression in graph under chart data->category groups->category group properties->label:
=Microsoft.VisualBasic.Interaction.SWITCH(Fields!LabelName.Value = "aTotalForRetire", "Retirement", Fields!LabelName.Value = "cTotalForRelatives", "Relatives", Fields!LabelName.Value = "eTotalForDisability",
"Disability")
The result is below. I want to hide the label relatives as in this example the value=0. It will not always be the case. How can I do that?
I am using the below expression for hidding the zero data labels in ssrs chart.=IIF(Fields!Name.Value=0,False,True). But this expression is working for some other charts. It is not wrking for only charts. I could not find the solution for that. How to hide the zero values.
View 4 Replies View RelatedData lables in ssrs reports are getting overlapped in stacked chart. Since it is satcked chart i can't place labels outside the bar.Due to this it is not visible clearly. how to avoid this issue?
View 7 Replies View RelatedJust upgraded to Windows 10. My SSRS reports, SharePoint 2013 integrated, still work but have no scroll bars. I can use the touchscreen to scroll left and right. Mouse wheel or any other attempts to scroll the report view don't work.
View 4 Replies View RelatedIs there a way to specify how many bars to display on a bar chart? And if the data set has more than the specified number of bars, then display another bar chart (on the next page) with the remaining bars?
View 3 Replies View Related
Hello All,
I have a reporting services report in the form of a chart. I have two datafields on the chart.
I need to be able to dynamically hide one datafield and view the chart for the other one and vice versa.
How do I do this ?
Any help would be appreciated..
Thanks!
When I export the report in excel format the chart is displayed as picture. I want it to be displayed as editable chart.Does Office Writer work in this situation and did anyone use Office Writer to accomplish same type of problem.Is there any other method or product we can use instead of the office writer.
View 2 Replies View RelatedI need to create a chart with the following features
1) Bar chart that has data for 3 years (3 series)
2) Line chart that has the same data as per the above points on the bar chart but this is a running total. (3 series)
3) These data points are for the 12 months
4) there should be a secondary axis for the cumulative one
Can I create this using the same data set?
I am creating a report to be used to print mailing labels. Size 1" x 2 5/8" (3 columns of 10 labels). I seem to have everything but the vertical spacing working properly. I have used a rectangle set to the size of the labels which contains a list box containing text boxes containing expressions to pull in the fields. Some of the street addresses are two lines with the majority being only one line.
I have joined the two fields containing the street addresses and inserted a new line command so each field will print on its own line but yet be contained within the same text box. Everything except the text box containing the street addresses are set to not increase or decrease. My problem is that on the pages of the report where labels vary between the one and two line street addresses the labels tend to creep down which in some cases causes data to be printed over two labels. Any ideas on what I can do to format these to print properly?
Thanks
Is it possible to repeat the row labels for matrix reports where there are multiple groups. So if the matrix report rows are department,division,employee then have all three labels show up on each row not just at the breaks. Cannot seem to find a way to do this. thanks
View 1 Replies View RelatedI have a sheet of mailing labels in which the first three rows have been used. I want a parameter or something when running an SSRS label report where I can specify what row to begin printing on and how many rows I want to print. Is that possible?
View 8 Replies View RelatedI have 6 separate mailing label like reports with a textbox inside a cell. I tried to join them into one report with subreports"but" it does not work since you need the print layout in order to get both columns to show. What is the best way to accomplish this task?
View 5 Replies View Relatedi would like to show all Labels available in a Chart and rotate the Labels 90°. How can i do that ? I changed the Propertie "Interval" to 1, "LabelsAngle" to 90, "LabelsAutoFitDisabled" to true in my Chart Axis.
View 12 Replies View RelatedWhen I tried to create a bar chart using SSRS 2012, the vertical axis values are repeating for smaller data sets values. It's only happening when the data labels are below 5, when the data is above 5 this chart represents data fine.
I tried specifying the custom intervals and this option all together eliminated the bar for value 1, instead it only showed the value 1 as text on the chart.
I tried changing the data interval type as number and the data type is of Integer, these are counts which I am showing in the chart.
I have a pie chart and have tried every option I could find on the Data tab for the point labels. They bunch up all over the place. What am I missing?
Does Dundas do this better?
Jerry
I have a line chart that has several series, and it routinely leaves off 1 or 2 point labels on the last X-axis.
Is anyone else experiencing this? If so, does anyone know what the cause is, and is there a fix?
Thanks!
BobP
Hi People,
I'm with a new problem.
I creted a simple bar type and sometimes the values of point labels are showing inside of bar, This is a problema, because if the length of bar will be short, the value doesn't shows. How can I make to force the point label value outside of bar ??
Thanks
I am working on a report that has 3 bars per series. I would like to add some gapping or whitespace between each bar in each series. Also how do you deal with overlapping. I know it can be done in Excel, I can't find the property of how to do it in SSRS. Any assistance would be appreciated.
View 1 Replies View RelatedI've created a chart and I'm using point labels. When I have two series, and the values on one bar of one of the series is zero, the point label for that bar shows up at the same point on the chart as the value for the other series--in other words, it shows up in the middle of the chart rather than at the bottom, where a value of zero should be. Any ideas on how to fix this? It just looks stupid.
Example--sales for customer 1 and 2 for June and July. Sales for cust 1 for June is 5, for cust 2 is 3; point labels show up at the tops of the bars. Sales for cust 1 for July is 0, cust 2 is 6; point label for cust 1 shows up near 5 (where the value for the other month of data shows), and for cust 2 at the top of the bar.
Thanks!
I have a chart that presently has two groupings on the x-axis: Year & Qtr. I'd like the Year labels to be one color, and the Qtr labels to be a different color. (All year labels should be Black, all Qtr labels should be Blue). I can see that an expression can be written to handle this dynamically, but I'm banging my head trying to figure it out...
Any help?
Thanks in advance,
Pete
hey all
I am using RS 2005
I have a report with chart
parameters = value1, value2, value3, all
How can I make the chart only show when all is selected?
cheers
jewel
Hi all,
Hopefully someone can clarify for me. I'd like to use custom colors for a chart that I have created. I've seen some code examples but I'm not really sure what to do with them. I've been using reporting services for like 2 days and I don't know xml or vb script, so I apologize for the probably stupid question. Thank you in advance.
-Keith
I am trying to display a chart from a data source that runs a stored procedure. The data dislays fine in the dataset tab, however, when I try to preview the report I get the following message:
'An error occurred during local report processing. The definition of the report 'reportname' is invalid. An internal error occured on the report server. See the error log for more details'.
I have looked at the error logs, but they do not help. I am thinking that my stored procedure is pushing a limit of the chart report. If I display the same data in a table, it displays fine, it is only in a chart. As I stated, the data is displaying in the dataset grid.
Can anyone give me an idea as to what my problem might be? I have other charts that run fine, but not using a stored procedure like the one below where I am performing multiple selects.
Below is the stored procedure:
set ANSI_NULLS ON
set QUOTED_IDENTIFIER ON
GO
-- =============================================
-- Author: Tim Olig
-- Create date: 09/20/07
-- Description: Returns Total Stored Procedure
-- =============================================
ALTER PROCEDURE [dbo].[sp_db_ReturnsSummary]
@Date smalldatetime
AS
BEGIN
SET NOCOUNT ON;
Select rtsum.FiscalYear,rtsum.Period,
rtsum.RMAComplete_ALL,
rtsum.RMAComplete_ANO,
rtsum.RMAComplete_EXT,
rtsum.RMAComplete_FAB,
rtsum.RMAComplete_SUN,
rtsum.RMAComplete_SUP,
salessum.ShipRev
from
(SELECT
CASE WHEN datepart(YY,returns.invdate) = 1900 then 2008 else datepart(YY,Returns.Invdate) end as FiscalYear,
CASE WHEN datepart(YY,returns.invdate) = 1900 then 'PENDING'
WHEN len(datepart(mm, returns.invdate)) = 1 THEN 'P0' + ltrim(str(datepart(mm, returns.invdate)))
WHEN len(datepart(mm, returns.invdate)) = 2 THEN 'P' + ltrim(str(datepart(mm, returns.invdate))) END AS Period,
"RMAComplete_ALL" = sum(returns.TotalCredit),
"RMAComplete_ANO" = sum(case when returns.respdept = 'ANODIZING DEPT' then (returns.TotalCredit) else 0 end),
"RMAComplete_EXT" = sum(case when returns.respdept = 'EXTRUSION DEPT' then (returns.TotalCredit)else 0 end),
"RMAComplete_FAB" = sum(case when returns.respdept = 'FAB' then (returns.TotalCredit) else 0 end),
"RMAComplete_SUN" = sum(case when returns.respdept = 'SUNROOF' then (returns.TotalCredit) else 0 end),
"RMAComplete_SUP" = sum(case when returns.respdept = 'SUPPLIER' then (returns.TotalCredit) else 0 end)
FROM [returns]
WHERE invfiscalyear = 1990 or returns.invdate >= @Date
group by datepart(YY,Returns.Invdate), CASE WHEN datepart(YY,returns.invdate) = 1900 then 'PENDING' WHEN len(datepart(mm, Returns.invdate)) = 1 THEN 'P0' + ltrim(str(datepart(mm, Returns.invdate))) WHEN len(datepart(mm, Returns.invdate)) = 2 THEN 'P' + ltrim(str(datepart(mm, Returns.invdate))) END)
as rtsum
left outer join
(select
datepart(YY,transdate) as FiscalYear,
CASE WHEN len(datepart(mm,transdate)) = 1 THEN 'P0' + ltrim(str(datepart(mm,transdate)))
WHEN len(datepart(mm,transdate)) = 2 THEN 'P' + ltrim(str(datepart(mm,transdate))) END AS Period,
"ShipRev" = sum(case when (OrderType = 'Invoiced' or OrderType = 'ToBeInvoiced') and SalesAcctDesc = 'Sales' then Revenue else 0 end)
FROM sforep where transdate >= @Date
group by datepart(YY,transdate), CASE WHEN len(datepart(mm,transdate)) = 1 THEN 'P0' + ltrim(str(datepart(mm, transdate))) WHEN len(datepart(mm, transdate)) = 2 THEN 'P' + ltrim(str(datepart(mm, transdate))) END)
as salessum
on rtsum.fiscalyear = salessum.fiscalyear and rtsum.period = salessum.period
END
Thanks,
Tim Olig
We are working with scatter chart in reporting services.we need to divide the chart into quadrants.We can use VB code in reporting services.Can anyone let me know the VB code to divide that into quadrants and coloring the quadrants
Thanks in advance
Subha
Hi all--I'm looking at SQL Server 2005 Reporting Services as a possible reporting solution for our data warehouse. One of our reporting requirements is the ability to do Gantt charts--has anyone out there had any experiences with creating one with Visual Studio 2005?
Thanks in advance!
Representing an elevation value in a line chart? or (Any chart)
The below are the sample values
GRID_ID StarPoint EndPoint Elevation
3 0 900 1220.1
3 900 1000 1219.5
3 1000 1100 1219.2
3 1100 1300 1220.1
4 0 100 1330.1
4 100 200 1328.1
4 200 300 1329.1
We are having trouble finding a lot of documentation around configuring the Funnel chart. Specifcally, we would like to know if there's an option to be able to place the lengend title on the actual Funnel layer. Also, we would like to be able to control the order of the funnel layers to match a business process order from top to bottom. It would appear that the Funnel defaults to aphabetical ordering of the layers. Any good reference for the options available?
View 4 Replies View Related