I need to create a calculated field that will give me 'yes' or 'no' if a date field is within +/- 28 days of another date field.
So for example if a.date = 1/1/15 and b.date is 30/3/15 the calculated field will say 'no'; if the b.date was 10/1/15 it would say yes.
Similarly, if the b.date was 1/11/14 it would say 'no'; if it was 10/12/14 it would say 'yes'.
I have line chart and want to see the xaxis date on interval of 5 days and it should start from first date and end at last date.
If my range starts from 11 Nov to 1 Dec
11 Nov 16 Nov.....1Dec
My date column have null fields . Though I have tried putting dummy values it still does not work so its not the problem of NULL.
I am getting Below results:
If I keep Interval one it starts form 11th and ends at 01 dec but it shows all dates.
What I'm looking to do is very much the image below. I need to bucket the DOS. I cannot do a calculation in a column because the DOS needs to recalculate based on filter changes or how graphs are setup. My DOS is a calculated field. When I try to create a calculated field to create the buckets I can't use it in a pivot table or powerview.
View 3 Replies View RelatedHow do I get data on my linked report based on my grouped subtotal and grand total from the main report. The subtotal and grand total are calculated columns.
I have a 3 columns in my matrix in the SSRS summary report. Actn_COAST, ActnCITY and NumbOfAccts.
The following is code for my summary report. The results are shown below.
SELECT Distinct ActnCITY, Count(ACCT) as NumbOfAccts,
CASE WHEN ActnCITY in ('NY', 'OH', IN, 'NJ', 'SC', 'NC') THEN 'EAST COAST'
WHEN ActnCITY IN ('CA'. 'NV', 'UT', 'WA', 'OR') THEN 'WEST COAST'
ELSE 'OTHER'
END AS Actn_COAST
FROM tbl1
where ACTNDATE between @STARTDT and @EndDT
Code for my detail report contains the following SQL
SELECT * FROM tbl1 where ACTNDATE between @STARTDT and @EndDT AND @ActnCITY = ActnCITY
I have linked my report based on the NumbOfAccts column. I am able to get data if I click any of the NumbOfAccts values related to the state I want. However when I am not sure how to make the subtotal and grand total work. I want when I click on the subtotal of either coast, I should be able to see records of that coast e.g., if I select 37 I should be able to see all the records in East Coast. If I click on the Grand Total, I only want data related to those 2 coasts.
A date field in a report returns the date value as:
2015-07-01 13:30:27.000
Is there any way I can script this to appear as:
01 July 2015 (or 01-07-2015 or 01/07/2015) - basically to cut out the hours, minutes and seconds?
The best I have managed is: CONVERT (varchar(17),DATE,113) AS Date1 but this still leaves me with:
01 July 2015 13:30
Hello,
My problem is with Validating Date parameter filed, when I user enters wrong (assume user is entering date instead of selecting from date picker). Where following are scenarios I would like to validate.When user enters non-date.
When user enters 30/feb/yyyy.When user enters 29/feb/yyyy. (for non-leap year).When user enters 31/mm/yyyy. (for months does not includes day 31)
Could you explain in a little more detail how to accomplish this?
thanks in advance,
Ramesh KS
Hello!
Your advice might helps me a lot! I'm looking for the answer for days.
I would like to add 35 days to every date field in a table. I The table structure, and content is dynamically changing.
Is it possible?
Thanks,
norbi
We are running sql 2008 R2. We have the JE_DATE field set up as an int. We are trying to subtract 30 days from this date field.
select * from GENERAL_LEDGER
where JE_DATE >= DATEADD(DAY,-30,GETDATE())
In addition to the where clause above we have also tried
where JE_DATE >= DATEADD(dd,-30,GETDATE())
For both we get the following error "Arithmetic overflow error converting expression to data type datetime."
Hi all,
I have an analysis services 2005 cube with a lot of Calculated Members (for example I have a "Sales Volume in kg" and a "Sales Volume in squaremeters (m)" and a calculated member "Sales Volume in g/m" with (kg * 1000 / m), and so on. This Measures should be shown with a hierarchical Product Dimension in which I can drilldown from a level1 to a level 4.
Sales Volume (g/m)
--------------------------------------------------------------------------------
Level1
Level2
Level3
Level4
Level4
Level2
Level3
Level2
I can select them all with a MDX Query in the Data-part of reporting services. In the layout-part, I have a matrix-control which should show the values in the above form. The value-part of the matrix has the form "sum(field)". I know, it's not correct, I believe I should use "AVG(field)".
When I use non-calculated fields, all works ok. With calculated fields, I get the error
[rsAggregateOfMixedDataTypes] The Value expression for the textbox textbox3 uses an aggregate function on data of varying data types. Aggregate functions other than First, Last, Previous, Count, and CountDistinct can only aggregate data of a single data type.
It's the same with sum and avg (as the error message tells me). But how can I use such fields in reporting services? My users wants a report with the product hierarchy vertical and the salews volume g/m horizontal so that the values are correct on every level the drill in. In Excel, OWC or other analysis clients, it's no problem to do this, but I can't find a way, doing this in reporting services.
Thanks for any help
Hans
I have a simple report with a row grouping on teh Date and record_id from an sql query. I would like to find the row total.
The expression I have on the row is:
=IIF(Max(Fields!closing.Value) > 0, Microsoft.VisualBasic.Interaction.IIF(Max(Fields!opening.Value) > 0, IIF(Max(Fields!closing.Value) > Max(Fields!opening.Value), Max(Fields!closing.Value) - Max(Fields!opening.Value), Nothing), Nothing), Nothing)
I created a dbo.Calendar table that stores dates and a work day flag (1=work day, 0=non-work day) so I can use it to calculate the next business date from a date using a function. I'm using a while group to count only the work days and a couple other internal variables but I'm not sure if I can even use them in a function.
Assuming Sats & Suns are all non-work days in April 2014, if my @WorkDays = 10 for 10 work days and my @DateFromValue - 4/1/2014, I would expect my return date to be 4/15/2014.
------ Messages after I click execute on my query window that has my function ------------------------------------------------------
Msg 444, Level 16, State 2, Procedure FGetWorkDate, Line 19
Select statements included within a function cannot return data to a client.
Msg 207, Level 16, State 1, Procedure FGetWorkDate, Line 20
Invalid column name 'WorkDay'.
Msg 207, Level 16, State 1, Procedure FGetWorkDate, Line 22
Invalid column name 'Date'.
------ my function code ----------------------------
CREATE FUNCTION [dbo].[FGetWorkDate](
@WorkDays VARCHAR(5),
@DateFromValue AS DateTime )
RETURNS DATETIME
[Code] ....
I am not sure if this is possible or not, we have two datasets and each one has an additional calculated field which breaks the value JobBilledExVAT into three years.
So it reports for example how much we billed in May 2015, 2014 and 2013.
I have got the table to display this when reporting on one dataset by grouping by year
The datasets both look similar to this
SELECT
Practice.ibvSalesByJob.JobBilledExVAT
,Practice.ibvSalesByJob.[Year]
FROM
Practice.ibvSalesByJob
INNER JOIN Practice.idvJobType
[Code] ...
The calculated field is
=Switch(Fields!Year.Value = Parameters!Year.Value ,"15", Fields!Year.Value = Parameters!Pre1Year.Value ,"14", Fields!Year.Value = Parameters!Pre2Year.Value ,"13")
The field I am looking to add together is below
=Sum(Fields!JobBilledExVAT.Value)
If I do the below on the dataset associated with the matrix it displays the sum for each year correctly, I would however like to add the Sum(Fields!JobBilledExVAT.Value) from a different dataset (ABS1M) for the relevant year.
I tried this
=Sum(Fields!JobBilledExVAT.Value) + Sum(Fields!JobBilledExVAT.Value, "ABS1M")
However this adds 2015, 14 and 13 from ABS1M and doesn't add them individually if that makes sense? With the calculated field it only shows Year under the main dataset heading not 15, 14 and 13 separately.
I was think of using LOOKUP however I don't know how this would work as 15, 14 and 13 are not displayed under the dataset.
I need to sort my tablix report where I have several calculated columns like:
=ReportItems!Textbox47.value+ReportItems!Textbox48.value..
Now I would like to sort these by using the Interactive sort functions - but I have seen elsewhere that this is not possible..(I'm also getting an error when trying..)Is there not a way that I can bypass this (using Code function or similar) ? The datasource for the data is a OLAP cube
I have a report with an expression to give a calculated field value (VoidDays) as follows:=DateDiff("d",Fields!Void_Start.Value, IIf(Fields!Void_End.Value is nothing, today, Fields!Void_End.Value))I have a number of different codes in the output such as VLOSS, VMAINT, VHOUS etc.When I run my report my days total for VLOSS is always correct but all other values are one day short. In the example shown in image below VMAINT should be 6 days and VHOUS should be 20 days which would then both add up to the VLOSS of 26 days
I cant currently fix these days at source for a number of reasons hence I need to fix these on the report output.How can I add one day onto each of my Void Days Total for every code except VLOSS which is always correct.
How can I get days of Month in SSRS report...?
View 5 Replies View RelatedI want a report that displays selected year quantity sales and previous year sales quantity and their quantity difference.
i also want to display a chart like I added year to the series group but i don't know how to add difference to the series group.
I am facing a strange issue with regards to generation of a report from my application in in Live. One of our client is using a report “Auditors Report”. When I try to generate the report for period of 1 month i.e. from 01 May 2015 – 31 May 2015, the report fails when the data is bound to report control. However if I try to generate the report for period of 1 day or 15 days for within the same month, report gets generated.
Now the same application and same database when attached to our local machine, the report gets generated properly for 1 month. I am not sure why the issue is coming on the server.
I have these columns. TicketID, User, Date...I want to select 10 random tickets for each user for the past 30 days. I not sure whether to do this via sql or using VB in the report design.
View 5 Replies View RelatedI have got this matrix and I am trying to calculate the average amount of working days in a month. At the moment, I have divided the total number of jobs by 21 for every month which is a hard coded value. However, I am not sure how to retrieve this value dynamically. Is there any formula that can find out the working days?
View 7 Replies View RelatedHow do you Write an expression to Return the date value based on the most recent date only?
Eg. Date 10-7-2015, action - done, notes - all items fixed.
Date 4-5-2016, action - not yet done, notes - buying parts
All these dates are returned based on a search parameter based on a project number. I only want the most current date and associated fields displayed.
I have a QA Deployment Date field that is being returned in a custom report I created. I also found a sample date range parameter:
What I want to accomplish:
I want to select a From and To Date and filter the report to only display the rows that have the QA Deployment Date within the selected range.
For example.. I want to select From Date (8/1/2105) and To Date (8/31/2015) and I only want to return only the results that have a QA Deployment date between that selected range.
I would like to be able to search by a single date, @StartDate, or by a date range , between @StartDate and @EndDate. I am having a hard time with the logic on this for a report in SSRS.
View 5 Replies View RelatedFor some reasons I have to use a ntext field for both small strings like "10" and large binalry files.
I need to sort the field to some extend to present the small strings on a sorted nice way - answers to " What country are you from" etc.
To trick the sorting I use a calculated field:
ORDER BY RSort - where Rsort is:
convert(varchar(4), RD.response) as RSort
It works but put a high load on the SQL server when the number of responses increases.
I though of making a non clustered index based on the calculated field, but is not sure that it will work as intended.
What do I do. The last thing would be to change the ntext to vchar(3800) or something like that. :confused:
I have a report being built from a stored proc. Then I have a total. Then I need to do a secondary total that would be the total - on of the lines in the report, but it may be a different line every time.
View 4 Replies View RelatedUsing this IIF statement:
=CountDistinct(IIF(Fields!Released_DT.Value = Fields!Date2.Value, Fields!Name.Value,
Nothing))
Released_DT = a date - 09/03/2015 or 09/02/2015
Date2 = returns another date value in this case 09/03/2015
What I'm trying to do is: count distinct number of people (Fields!Name.Value) if the Relased_DT = Date2.My IIF statement is returning a zero value.
I am creating a report that shows orders created by our employees but I am having trouble with one employee. She changed her last name this year and so in the report, it shows a line her with her maiden name and one with her new name.
Is there a way to combine all the data from both names into one name so it appears on one line and looks like a single person instead of two.
I am creating a report with a Matrix and this report contain a collapse Matrix which it toggle from a certain field.
Now I am having two issue:First issue is that when I set visibility to hide and that the matrix can be toggle by a field is leaving a very unaesthetic space between rows.
The second problem is that when I toggle the field I would like another part of the report to hide.
Does it exists anything that would allow me to define an expression I can use in the visibility that I Can use to make disappear this part of the report when the + has been toggle and make it appear back when the - has been toggle?
Is there a way in Reporting Services layout mode to get the report to display more than one response for one field in the same cell?
More specifically, I have a list of classes that lists section, title, and instructors. If the class has more than one instructor, I want the instructor cell to list both instructors in one cell, separated by a semi-colon, rather than listing all the class information - along with instructor - in two separate rows. Any suggestions?
something like this:
Section
Title
Instructors
15
Class 1
Jones
16
Class 2
Jones; Smith
I'm sure there's a way to do this, but I can't figure it out. I want to see if a field has a semi-colon in it and if it does display one thing, if not display another. But it doesn't just have a semicolon. It's a list of names, and if there is more than one name there will be a semi-colon between them.
I was hoping this would work:
=IIF(Fields!ID.Value LIKE "%;%", "yes", "no")
but it doesn't... I'm looking for something like:
=IIF(Fields!ID.Value CONTAINS ";", "yes", "no")
Any ideas?
I am having SQL query which has inner join table from another Database. The below highlighted query shows its values.
/*Trend and Capacity Report*/
SELECT MEA.DisplayName AS Cloud, MEB.DisplayName AS VM, OS.PropertyValue AS OS, CONVERT(varchar(17),PD.DateTime,113) AS Date,
VM3.VirtualCPUCount AS VCPU
FROM Perf.vPerfDaily AS PD
INNER JOIN vPerformanceRuleInstance AS PRI ON PD.PerformanceRuleInstanceRowId = PRI.PerformanceRuleInstanceRowId
INNER JOIN vPerformanceRule AS PR ON PRI.RuleRowId = PR.RuleRowId
[code]....
My request is to calculate total capacity of all available Virtual CPUs, Memory and Storage from 4 separate clouds: 'cloud1','cloud2','cloud3','cloud4'
Whenever I select =Sum(Fields!VCPU.Value) expression in Report Properties and assign it to a variable and assign that variable to a Text Box field I get the value as VCPU * (Number of VMs) which is not correct.
I am looking to get the value of VCPU from all 4 clouds above.
We have an SSrS report that has a tablix cell with a textbox that is a hyperlink to another SSrS report. We pass parameters to the report using the textbox properties>Action set to "Go to report" and setting the parameters to the value of a field and a parameter as shown below. We want to set action to "Go to URL" and to pass these variable parameter values in the URL. How is that done? URL....
View 2 Replies View RelatedI have to display check box against each value coming from the table in SSRS. I have tried using html tags in an expression but it is displaying only for the first field.
Ex: my table contains Medical details with Type column with 3 rows Type
Prevention
Relief
Required
in my report i have to display as
I am attempting to pull certain bits of information from the content field in the ReportServer.dbo.Catalog. I found this blog post that is nearly perfect : URL....However, when I try and bring in the query parameters, I am just getting nulls. All the code is:
--The first CTE gets the content as a varbinary(max)
--as well as the other important columns for all reports,
--data sources and shared datasets.
WITH ItemContentBinaries
AS ( SELECT ItemID ,
Name ,
[Type] ,
CASE Type
WHEN 2 THEN 'Report'
WHEN 5 THEN 'Data Source'
[code]....
I've tried various variations on the bit third line up from the bottom without any joy. I been reading lots on XML this morning and thing my head has completely gone out the window.