Reporting Services :: Cannot Create A Connection To Data Source
Apr 21, 2015
An error has occurred during report processing. (rsProcessingAborted)...The execution failed for the shared data set 'DataSet1'. (rsDataSet ExecutionError )...Cannot create a connection to data source ' Data source for shared dataset'. (rsErrorOpeningConnection)...the above error message I get on the published report, but everything works fine when I do a preview in Visual Studio.How can I see exactely what is wrong?
I have set up a report on reporting services and deployed it on a server. (server A) The data comes from 2 databases - one on Server A and one on server B
I can view the reports when logged into Server A, but if I try to view them from a networked PC I get the following message:
An error has occurred during report processing.
Cannot create a connection to data source 'byvshs01'.
For more information about this error navigate to the report server on the local server machine, or enable remote errors
Byvshs01 is Server B.
However, if I remove the data from server B from the report, I can view it ok. So it seems you can view data from a DB located on the server that hosts the reports, but not if the DB is located elsewhere.
As the title states I have a 64bit DSN but when I try to create ODBC datasource in Reporting Services it does not appear in the dropdown box. I have created as a system DSN.
We are running Reporting Services 2008 R2 on a Windows Server 2008 Standard 64-Bit server. I have a user that has full access to Reporting Services at all folder levels but IS NOT a local administrator on the 2008 server.
This user can create data source connections but when he tries to test the connection by clicking on the 'Test Connection' button, he gets the following error "The permissions granted to user <username> are insufficient for performing this operation.A user that has administrator priveleges on the server can test the connection fine.
I don't want to make this user an administrator on the server.
This is an extract from the log file:
ibrary!ReportServer_0-24!3478!08/16/2011-13:45:37:: Call to TestConnectForDataSourceDefinitionAction(). library!ReportServer_0-24!3478!08/16/2011-13:45:37:: e ERROR: Throwing Microsoft.ReportingServices.Diagnostics.Utilities.AccessDeniedException: , Microsoft.ReportingServices.Diagnostics.Utilities.AccessDeniedException: The permissions granted to user <username> are insufficient for performing this operation.;
I am trying to view report that i deployed to reporting service but when i try to view it, it gives error:
An error has occurred during report processing. Cannot create a connection to data source 'INVC'. For more information about this error navigate to the report server on the local server machine, or enable remote errors
Why is it that sometimes I get this error and sometimes not after I deploy the same shared data souce to my Report Server?
Even if I try deleting the datasouce through Report Manager the redeploy it from VS 2005, it still errors out when I run my report. I am able to run my report fine in VS.
An error has occurred during report processing.
Cannot create a connection to data source 'mydatasourcenamehere'.
For more information about this error navigate to the report server on the local server machine, or enable remote error
I cannot get this error resolve either for myself or any users, and I'm actually part of the Admin group! Furthermore, a user with whom I'm tring allow to view this report keeps getting prompted for their windows username and password. I thought that since this datasource was set to Windows Authentification that it would just pass it through?
Also As far as I know, I've given sufficient permissions to the right logins and right users on my SQL Databases and related stored procs that the datasets (not datasource) run
An error has occurred during report processing.
Cannot create a connection to data source 'datasourcename'.
For more information about this error navigate to the report server on the local server machine, or enable remote errors
I posted the same issue before, but I couldn't find the solution yet. I am posting this agian cos I tried almost everything and I am not able to solve the issue.
Let me explain what is happening here:
Server A - is my development local machine
Server B - is the remote reporting server, where all reports are deployed
Server C - is where the databases are located
- After successfully deploying the project (the reports and datasources) on the remote server and try to run the report , I am getting the following error message
An error has occurred during report processing. (rsProcessingAborted)
Cannot create a connection to data source 'dsCallB'. (rsErrorOpeningConnection)
For more information about this error navigate to the report server on the local server machine, or enable remote errors
- I tried to deploy and run the same report on my local machine report server(Server A), which is still accessing the same database from Server C. This works fine.
So from this we can understand that A ==> B ==> C is not working, however A ==>C works fine(using Server A as a report server).
I almost tried all the possible solutions that are posted on the forum, such as storing the credential information on the report server (server B), created a data source, which is not a shared data source, on the report server level e.t.c. and I ended up with nuthin.
The weired thing is that there are existing reports that are already created and deployed(by somebody else) in the report server (server B) , which access the database on Server C. These existing reports run with no problem, even I can create a report which uses the existing data source and runs perfectly. However, when I create a new report which uses a different data source (from Server C), and deploy it to Server B and tried to run it, the above error message comes.
Hi! I've created a project includen 3 reports based on following code on 3 server. The report includes 3 different datasources an 3 different report. All 3 reports are grouped on Database and summerizad zise.
SELECT
SD.name [Database],
SMF.name [File],
SMF.size [Size]
FROM
sys.master_files SMF INNER JOIN sys.databases SD
ON SD.database_id = SMF.database_id
I can run all reports in Visual Studio (preview). But I can only run one the reports after depolying the project! I get this message when I raun the other 2 reports:
An error has occurred during report processing.
Cannot create a connection to data source 'uasql02_datasource'.
For more information about this error navigate to the report server on the local server machine, or enable remote errors
I tried running the report from an server (where reportingservices is installed) finding that all the reports works as they should. I logged in another server with the same credentials. I got same message on the server as I get on my own camputer, "Cannot create a connection to data source ..."
Is there anybody out there having same problem as I, or someone who has any suggestion?
Today I was making a few reports. When I tested the reports in Visual Studio, they worked great: I got the expected result. But when I deployed the reports to our reportserver the problem started. When I click on the directory in which my reports are deployed, I got my 4 reports. Till now everything worked correct. But when I click on a report to view the results it went wrong. I got an error: "Cannot create a connection to data source 'Live'" (Live is the name of our data source).
We are using the Windows Logons and I am sure that I have all the rights on the server, I gave myself 'sysadmin' rights, so it should work. I also have tried it with all the roles assigned on my account, but then it still won't work.
When I modify the data source, and set it to another server en database it works. The datasource 'Live' exists on a x64 MsSQL server, en the other datasource is on a x86 MsSQL server. Maybe that is the problem?
I successfully created the a Report model and deployed it to the server. When i run the a simple report on the SQL Server where reporting Services is installed it runs fine. When I run the report from anywhere else, I get the error below. I don't have a datasource called 'dataSource1'.
For more information about this error navigate to the report server on the local server machine, or enable remote errors ---------------------------- Cannot create a connection to data source 'dataSource1'. ---------------------------- An error has occurred during report processing.
I have installed Operations Manager on one server and Reporting Services for Operations Manager on another. When I attempt to run reports from Operations Manager, I receive the following message: Cannot Create a Connection to Data Source "DataSource1" Any suggestions?
I have setup SSRS with 3 data models using 3 different datasources on one server. I can create reports ok, but if any of the other users I want to access these reports tries to open the report I created or run there own reports (they can create a report), it gives them the error:
Report Execution Error
Cannot create a connection to the data source 'datasource1'
I do not recieve this error, but the other users do. I have set the other users as System administrator in the site-wide permissions, so they have access to everything.
Everything is set to integrated windows authentication.
On the Reporting Server Configuration Manager, the Unattended Execution Account is not selected and is blank.
What could cause these users not to be able to run existing or new reports they create?
No matter how many times I redeploy my report and data sources from my project to Report Manager, I keep getting this error when trying to run the report from Reprt manager. It runs fine in VS 2005 though. I don't know what else to do. I see no way to delete the report from Report Manager in attempts to try to redeploy it from scratch either.
An error has occurred during report processing.
Cannot create a connection to data source 'myservername'.
For more information about this error navigate to the report server on the local server machine, or enable remote errors
My requirement for the parameter is multivalue parameter with a text box. for example when user enters aa15 it need to include product aa15. when the user enters aa15, aa16, zz15 than it needs to include all the three products. the last case is when the user enters AA** than i need to inclued all the products start with AA. when i use default multivalue parameter with data source analytical services than i am getting a drop down box. I dont want that. I need a text box where user can enter the value. 1. In sql we have a like key word to query . for example select * from product where product like "AA%". what is equavalent mdx query to get such results ? 2.How to impliment the multivalue parameters without using dropdown box?
created an Oracle datasource (tried both ole db & oracle client) in Visual Studio 2005 report project - works fine connecting and preview of report within ide , deployed to Reporting Services web server, received the following error when attempting to run the report on web server:
An error has occurred during report processing. (rsProcessingAborted) Cannot create a connection to data source 'oracle'. (rsErrorOpeningConnection) System.Data.OracleClient requires Oracle client software version 8.1.7 or greater.
web server has oracle client 10g installed and connecting to db ok through sql plus (this server also is loaded with VS2005 and the SqlServer2005 db)
I cannot get this error resolve either for myself or any users, and I'm actually part of the Admin group! Furthermore, a user with whom I'm tring allow to view this report keeps getting prompted for their windows username and password. I thought that since this datasource was set to Windows Authentification that it would just pass it through?
Also As far as I know, I've given sufficient permissions to the right logins and right users on my SQL Databases and related stored procs that the datasets (not datasource) run
An error has occurred during report processing.
Cannot create a connection to data source 'datasourcename'.
For more information about this error navigate to the report server on the local server machine, or enable remote errors
We have a new installation of sql server 2005 reporting services. we can deploy reports without a problem users can connect to report server but when they try to run reports they get this error msg.
An error has occurred during report processing. Cannot create a connection to data source 'xxxxx'. For more information about this error navigate to the report server on the local server machine, or enable remote errors
in reporting services the datasource credentials are saved on the server
I have 4 Tablix and 2 of the Tablix get data from Server 1 and other 2 get the data from Server 2.I have set NoRowsMessage "=Data Not Available for the Selected Values" for all the 4 Tablix.Now if data is not available from Server 1 then I must show "Data Not Available for the Selected Values" only once in the outputbut now its appearing twice in the output because of the 2 tablix that had no rows.Similarly if data not available from Server 2 then it should show "Data Not Available for the Selected Values" only once in my output.If Data not avilable from all the Tablix then also i t should show only once as "Data Not Available for the Selected Values" in the report output.
I want to perform a Analysis Services Processing Task using a connection manager created from a Analysis Services data source. I create the data source using the Oledb provider for Analysis Services 9.0, and it works fine. Then I create a connection manager using the "New connection from data source" option, and it seems to create it ok.
The problem is that I can't then asign this connection to the Analysis Services processing task. I get the error:
"Connection Manager MyConectionManagerFromDataSource is not a Analysis Services Connection Manager"
However, if I create directly a connection manager using "New Analysis Services Connection" it works fine.
Is it at all possible to create a Analysis services connection from a Data Source to perform a Analysis Services Processing Task?
I want to run SSRS report directly by connecting Excel as a data source. The report runs properly from SSDT, but when it is run from Report manager, some users cannot access the Excel connection and the report execution fails. I am using SSRS 2012 and Excel 2010.I have created the ODBC data connection in SSRS and when I use 'Windows Integrated Security' option for credentials, the connection gets successful. But the problem is that all users does not have permissions to access the Excel inline, but they should get the report working.How can I store the credentials to access the Excel in SSRS with a specific username and password?
When Datazen caches a data source, it sometimes says that the data was truncated. What factors are involved in the truncation and what I might be able to do to expand the size of cached elements to avoid truncation? My only current solution is to make the data source "Real Time" rather than cached.
I have a question about ssrs security. In report manager I have set a list of users as browsers, and the builtin administrators are content manager in the parent folder where reports are. A user that is not an administrator and neither a user I added, has access to reports.
I'm thinking this person is having access because the data source of the reports use a administrator account to connect to the analysis services using the option Credentials stored securely in the report server with the 2 checkboxes marked (use as windows credentials when connecting to the data source and impersonate the authenticated user).
I simply marked this option because SSRS is in 1 server and SSAS in other and I think kerberos need to be configured and I haven't looked into it, but I think the report access is separated from the data source.
I am building a webapp that calls an SSRS instance to display a report based on another servers web service.I can make a call from the ssrs server using this in the RDL:
This works no problem. but.. I want to have the user parameter "Craig" be a parameter passed in from the web app. If it were a regular SQL data source you would put @user in the query. How do you do it with XML text queries?
I am attempting to pass report parameters to my query. My report's data source is a WCF web service. I can run normal queries fine, but I have found that without the know-how to pass parameters to my query I am limited with my capabilities.
Assume a string parameter named "Name" with a specified default value of "Jmachol90", how would I pass that into the following query at the designated place:
First off, let me just say that I'm a complete newbie to SQL Reporting Services, and .NET in general. We have a VB 6 application that is trying to launch an SRS 2005 report in a viewer window. This was accomplished by creating A VB.NET "wrapper" window that launches the report, and allows the report to be previewed, exported, etc. I did not write any of this.
The report is using a Shared Data Source, which points to a specific database. My problem is that the users can select which db they want when they launch the VB 6 Application, so I need to find a way to edit the connection string in the report to specify which database to use on the fly. I have the db name in the "wrapper" application, but I can't figure out how to pass it to the report.
