is it possible to replicate this in SSRS I wonder??I have included the code of the fields used and a snapshot of some data, and also how the Pivot looks in Excel.
SELECT
TARNSubmissionID,
ISSBand,
BPTLevelAchieved,
FinancialYearOfDischargeOrDeath,
FinancialQuarterOfDischargeOrDeath,
FinancialMonthOfDischargeOrDeath,
CalendarMonthNameOfDischargeOrDeath,
[code]...
The excel pivot table is very powerful for the user, with dragging and dropping fields at will on the web page, but I can only get it work when run from the web server directly. The data is in SS2000 300,000 rows, get external data in Excel, then publish pivot table as HTM with interactivity.
It seems to look for c:myodbc.dsn in the C: drive of the pc the user is on rather than the server, and I cannot use IP Addressing to relate to the dsn file.
any ideas ?
TIA
Neil.
I am running into a weird issue with a new SQL Reporting Services 2014 server I built. I installed SQL Reporting 2014 on Windows Server 2012 R2 and configured Kerberos, but the site is extremely slow. After some reconfiguration and log captures I have determined the issue has to do with the Kerberos setup, however I am running a similar configuration with SQL Reporting Services 2008 on Windows Server 2008 R2 and do not run into the same errors.
The error I see while using Wireshark is KRB Error: KRB5KDC_ERR_BADOPTION NT Status: STATUS_NO_MATCH. When I drill down the into the error I can see the kerberos string is testprjmnmtreports14.company.com, which is the URL we are using to access the site. I made sure to add that name as an SPN for the service account that is running SQL Reporting Services, however I still receive the error.
Then I tried configuring the site to run without a hostheader, so I accessed the site with the server name, ECTSTSQLRS5, and the site works perfectly fine, no errors are reported either. So it seems I have isolated the issue down to Kerberos but I am not sure how to resolve it. Here is some more information about my environment:
DNS/URL used: testprjmnmtreports14.company.com
Server Name (FQDN): ECTSTSQLRS5.company.int
AD Domain Name: company.int
Server Version: Windows Server 2012 R2
AD Functional Level: 2008 R2
As you can see I am trying to use a .com address but my AD domain is .int which I think is the issue, but I do not have the same problem on my other server that is running Windows Server 2008 R2. What do I need to do to allow my new site on 2012 R2 to work with this DNS Alias?
Wonder if you could help me ?
I have set up a cube running under MSSQL Server 2000 Analysis services and have created reports in Excel 2002 using pivot tables and linking into the cube as an external data source.
The pivottable works fine and I can slice / dice as usual, the only thing that doesnt work is the drill through into AS. I receive and error message saying "Cannot show detail data for that selection...".
Now I know that the drill through works, as when I create a report using the Analsyis Services Excel Add Inthe drill through works fine, its just how do I get it working using the pivot tables ?
fyi - the reason I dont want to use the Analsyis Services Excel Add In for all the reports is because I have to deploy this to XX number of users, who wont have admin rights on their machines etc etc....
Is there any VB that I could use to perform this drill through and return the results.....or easier ??
Thanks very much
Mark
HI,
We currently have a report generated weekly running script which creates an excel file and pivot tables. Using pivot tables we can drag and drop the various required fields and the report changes instantly. But i was told there is a limitation of size while using pivot tables.
Can this report be easily created with almost all the flexibility in reporting services, if so could you please guide me with some sample report or tutorials.
currently there is a some store procedures thats run every week using a DTS manually, is there a way of automating this.
Many thanks in advance.
Cheers
Dargonheart 007
Running SQL Server 2005, trying to develop an SSRS report to basically pivot a table of data with multiple columns.
Here's the basic source table:
Day Cases Referrals Vends
1 291 0 0
2 293 1 0
3 293 1 1
And I want to display it as:
Day 1 2 3
Cases 291 293 293
Referrals 0 1 1
Vends 0 0 1
I thought I could use a matrix for this but I can't seem to get it worked out. Is this even possible?
The Day number is meant to represent the day of the month and the user would input a start and ending date parameter.
Im trying to display all twelve results from a dataset in reporting services. On the layout tab I can get the first and last record in my dataset to display by using the commands:
=First(Fields!MonthYear.Value)
=Last(Fields!MonthYear.Value)
But I cant get the ones in between?
I am trying to create a matrix report to work similar to a pivot table, where when a user clicks on the count, the details are displayed. When I add the action to open a sub-report, how do I pass in the parameter values for the group that was selected? meaning if in row group- I have company name, and column group I have job title, when the count gets clicked, i need to pass in the company name for the row that was clicked along with the column group. How can I proceed?
View 2 Replies View RelatedI have created a query that is suppose to display the results of opportunities won during a time period the user selects.
When I run the report, I get 5 rows of the exact same result.
How come I am getting this?
DECLARE @DateStartDATE = '2011/02/25';
DECLARE @DateEndDATE = '2015/12/27';
DECLARE @UserVARCHAR(100) = 'Linda Smith';
SELECT
OPP.customeridnameAS 'Customer Name',
[Code] ....
I have a report with a field as follows:
=Fields!Intervention_Type.Value
This field has 25 different Interventions type. i.e
Referral to Physician = 2
Referral to homecare=20
How do I format that so that the results include not only Intervention type with a value but Interventions with a value of 0 as well...
Created a report with parameters that can have multiple values.
Ran Stored procedure with same above criteria and data is retrieved
Ran the report and no data is displayed
I am unable to figure out where it might have gone wrong.
I'd like to get a extract table result, with a reference id primary key, showing the maximum dates for events and who was responsible for them. I can get the max(date) field in columns using PIVOT, but can't see a way to get the 'who' field without lots of LEFT JOINs.
Here's some test data and code which shows the principle:
CREATE TABLE #t
(
ref INT ,
id INT ,
who VARCHAR(10) ,
checkin DATE
[Code] ....
The result set is:
ref 1 who1 2 who2 3 who3 4 who4
123 2014-01-18 carol 2014-01-18 andy 2014-01-16 bill 2014-01-17 carol
456 NULL NULL 2014-01-17 NULL NULL NULL NULL NULL
Is there some way to avoid all the LEFT JOINs, maybe by using another PIVOT, to produce the same result?
I have created a query in which I have used first_value, lead, lag windows functions. I tried using the query in SSRS query text, but for some reason it could not load. Then I created a stored procedure and implemented that query in stored proc.
The problem is that I am able to execute the stoured proc from sql server studio, but SSRS is not able to load data.
I am trying to create an SSRS report to display a single row of Household information (from CRM Dynamics) Household being the Parent Entity, with 1:N relationship with Contact Entity.
How would I go about showing all the Firstnames (from Contact) in the same cell like the below?
Hi All,
I would like to know whether i can export a report to excel from reporting services, with all the column width set to the max width of the text in it(AutoFit Column width), so that the excel report doesn't look cramped.
Thanks in Advance.
Cheers
payal
Messages to the reporting services group get no attention, and Ihaven't been able to find anything on MS support so I am going to tryhere. We have a prticular report, that when exported to Excel throughReporting services exports fine, but has an additional Excel sheetlabeled DocumentMap with bogus code in it and it has the focus bydefault. There is another tab called Sheet1 which has the correctreport data. Any idea how to get rid of this DocumentMap tab/sheet?
View 1 Replies View RelatedI have a query on the export to excel.I have a report which i am export to excel but after exporting the excel shows the numbers as text and couldnt sum it up. what formating changes to be done to export the numbers as numbers?
View 4 Replies View RelatedSo, this is my Query for dataset "SalesOrder":
SELECT
SO_Header.Customer
,SO_Header.Status
,SO_Header.Customer_PO
,Customer.Name
,SO_Header.Order_Taken_By
[Code] ...
I would like to have a parameter on my report to Select by Order_Taken_By. My attempt at that is here:
Dataset called OrderTaken:
select distinct SO_Header.Order_Taken_By
from SO_Header
Under the report Parameter Properties named @Order, under Available Values
Selected "Get Values from a query"
I have DataSet: OrderTaken
Value Field: Order_Taken_By
Label Field: Order_Taken_By
The values of the field Order_Taken_By is all text characters, no integer values.
Running the inital Query by itself yields results. When I add the parameter, I can make a selection, but now I get no results, even though there should be values for the choice I've chosen.
I manage a Sales MIS Reports System, which has been in Production since 2006 for a Pharma company. The web app is built on ASP.NET with SQL Server Reporting Server 2012. This May we migrated to SQL Reporting Services 2012, as IPad support for reports was
required.
A Safari on IPad limitation which we knew of and documented was lack of "Export to Excel" feature for SSRS 2012 reports (only export to .PDF and .TIFF supported). The same report on a desktop browser allows me all export functionality.
But now an overwhelming number of IPad users have come back with the requirement to support "Export to Excel" on the IPad.We were also surprised to discover that few of these users were provided IPads last year and they were accessing the old SSRS 2008 R2 reports (even though we did not support it).
And these users were exporting reports to excel on the IPad since last year. These users are especially annoyed that we broke existing functionality while moving to a new version which was supposed to support IPads.
how we can provide the "Export to Excel" functionality for these IPad users.
I am adding some KPI-style graphics to a report (BIDS 2005) and for consistency I would like to use the same icons that are available in the Excel 2007 icon sets that are used for conditional formatting in spreadsheets - there's no point in having users learn another set of icons. Are these graphics available anywhere so they can be added as embedded images in a report? Am I missing some other way to do this?
Thanks,
John W.
Hi,
i have a report (RDL) which gives output of around 100000 rows. i am using reporting service's web service from an aspx page to render this report to excel. this is giving error as excel sheet can accomodate only 65000 rows. how can i add second excel sheet and tranfer the remaining rows into that sheet. i need this desperately.
Thanks,
Srik
I am trying to get my ssrs report in an excel. I want the report to be displayed in a single excel sheet, however, I am getting multiple sheets. I have even tried the page break functionality and used the
expression(=IIF(Globals!RenderFormat.Name="EXCEL",TRUE,FALSE) in the tablix properties--> pagebreak--->disabled option.
The same is not working. what am i missing here?
I am very new to Reporting Services. What I would like to know is if there is anyway for me to consume the raw data on a specific report from within excel. That is, can I call a report from reporting services directly from excel.
Maybe someone can outline the supported interaction between excel and reporting services for me. I have been having lots of trouble locating information about the interaction between these two.
--David
I have a table of customer information (ci), but I have to link to another table in order to get the street address (sa).
If I exclude the street address I get 33 results. If I make the link to street address I will only get 30 results.
What I found is that if the ci table field for country is blank and I try linking to sa table then that result will not be shown.
Is there a way to get all 33 results while linking the two tables?
We have a report that we do not want to be able to be exported to excel. Is there a way, just on one report to limit the types it is exported toDBA.
View 20 Replies View Related
I made some great Excel Server reports integrated in Sharepoint 2007.
BUT, i also want to show those reports in a SQL 2005 Reporting Services report.
How Can I Do That ?
thanks,
avner.
I want to run SSRS report directly by connecting Excel as a data source. The report runs properly from SSDT, but when it is run from Report manager, some users cannot access the Excel connection and the report execution fails. I am using SSRS 2012 and Excel 2010.I have created the ODBC data connection in SSRS and when I use 'Windows Integrated Security' option for credentials, the connection gets successful. But the problem is that all users does not have permissions to access the Excel inline, but they should get the report working.How can I store the credentials to access the Excel in SSRS with a specific username and password?
View 4 Replies View RelatedI have a table where I added several header rows above the details row and increased the row heights to 0.4in. The row height looks fine in preview, but when I export to Excel, it is as if I had not increased the row height. I have found through trial and error that if I place a textbox below my table and position it so that it is under the rightmost column of my table, then I get my desired row heights in Excel. If I remove the textbox or if it is not under the rightmost column then the row heights revert back to their original size. The textbox can be empty and still has the desired effect. i am using SQL Server 2008 RTM and VS 2008 SP1.
View 4 Replies View Related
Hi
Can someone help debug this error while downloading to EXCEL format from RS? I notice that whenever i trim down the length of my report name, the error has not occurred.
The error encountered was:
I am exporting the ssrs report with Execl sheet but iam getting this error in excel sheet"The number in this cell is formatted as text or preceded by an apostrophe ".
View 3 Replies View RelatedWhen i am exporting into excel then 15.00 value is showing me 15 value.Is there way to show the value 15.00 in excel.
View 3 Replies View Related
Hi
Can someone help debug this error while downloading to EXCEL format from RS? I've notice that whenever I trimmed down the length of my report name, the error has not occurred.
The error encountered was:
1 I have summary and detail report into same page (Open below link for reference). Now i want highlight selected value after clicking in summary report for open detail report...
[URL]
2. I have a report with multiple link which one redirect to other reports. After exporting link is showing and able to open other reports from excel. I want disable link after exporting into excel. How can disable link after exporting in excel ?