Reporting Services :: Converting Hours In Decimal To Time Format Using Expression
Nov 10, 2015
Is it possible to convert for the following SQL statement into SSRS Expression:
SELECT
RIGHT('00' + CONVERT(VARCHAR(2), FLOOR(SUM(Hours))), 2)
+ ':' + RIGHT('00' + CONVERT(VARCHAR(2), FLOOR((SUM(Hours) - FLOOR(SUM(Hours))) * 60)), 2) + ':' + RIGHT('00' + CONVERT(VARCHAR(2),
FLOOR((SUM(Hours) - FLOOR(SUM(Hours))) * 60 - FLOOR((SUM(Hours) - FLOOR(SUM(Hours))) * 60)) * 60), 2)
FROM TableTime
For example I need SSRS expression for converting 1.75 hours into 01:45:00.
View 3 Replies
ADVERTISEMENT
Apr 21, 2015
I have a decimal data type column with a record in the following format 20150219 --> yyyyMMdd. And I am trying to convert the return value from SSRS date/time parameter to a decimal value.
The TMDTOP column is the decimal data type with date records in yyyyMMdd format.
My return parameter is the following:
=IIf(IsNothing(Parameters!SystemDate.Value),Fields!TMDTSY.Value,CDec(Format(Parameters!SystemDate.Value,"yyyyMMdd")))Â
When I try to run the report I get the following error:
Failed to evaluate the FilterValue of the DataSet ‘DataSet1’. (rsFilterEvaluationError)
View 3 Replies
View Related
Apr 21, 2015
SELECTÂ
  CONVERT(VARCHAR(10),attnc_chkin_dt,101) as INDATE,
  CONVERT(VARCHAR(10),attnc_chkin_dt,108) as TimePart
FROM pmt_attendance
o/p
indate   04/18/2015
time part :17:45:00
I need to convert this 17:45:00 to 12 hours date format...
View 8 Replies
View Related
May 13, 2008
I have a float variable that holds a decimal number of hours.
So 1.5 equals 1 hour 30 minutes.
I need to change this to the format 1:30
Any idea how to do this?
View 10 Replies
View Related
Jun 13, 2015
I have a problem with my reports in SSRS 2012,
I have numeric values in database(10.23) but when load this values in a report, I see: 10,23 instead 10.23Â
The regional configuration of server is: Spanish-Peru. Why the report show the value: 10,23 I don't put any regional configuration in the report...
View 3 Replies
View Related
Nov 27, 2007
Start End Duration
11/20/2007 12:05:57 PM
11/20/2007 12:08:06 PM
00:02:09.6570000
Duration =(Fields!end.Value-Fields!startdate.value) i get the output as shown above.
I need to round that output to 2 decimal places and display it as 00:02:09.65
Any ideas?
View 7 Replies
View Related
Oct 29, 2015
I have  @for_dte parameter(date data type) in a ssrs report
using below expressionÂ
=Format(Parameters!for_dte.Value, "dd/MMM/yyyy") -i got Output:10/Oct/2015
but i need Output:10/OCT/2015(ie OCT in capitals).
How can i achieve that using expression.
View 2 Replies
View Related
Apr 22, 2015
I am using the following expression to place the month in the heading of a column.
=MonthName(Month(DateAdd("M",-1,Now)))
The expression above gives me the previous month, but I need to have it as "Jan", not "January".
expression that will give me the three character month name instead of the full month. Â I've tried substituting the "M" with "MMM", but get an error. Â I've also tried "Mon", but again, I
get an error.
View 4 Replies
View Related
Feb 3, 2014
I have a series of times in decimal 15 min slots. The data type is float and the field is the followng:
10
10.25
10.5
10.75
11
and so on
I would like to convert that to the hour and 15 minute slot
10:00:00
10:15:00
10:30:00
10:45:00
11:00:00
View 4 Replies
View Related
Apr 4, 2008
Hello,
I have this expression DATEDIFF(HOUR, startdate,enddate) which only shows the hours. I need to show the hours and minutes too , exp. 9.17. Any way to convert the expression to do this. The startdate and enddate fields are mm/dd/yyy hh:mms. I am using report builder.
View 9 Replies
View Related
Jul 30, 2008
I am trying to convert hours and minutes to decimal and arrive at a sum of time taken. The column TotalTimeSpent is the diff in hours/mins between the Started and Ended times.
SELECT DATENAME(weekday, Started) AS Day,      C.Category,    ClientCode,Description,   dbo.FormatDateTime(Started, 'HH:MMS 12') as Started,   dbo.FormatDateTime(Ended, 'HH:MMS 12') as Ended, CONVERT(varchar,TimeTaken,108) AS TotalTimeSpentFROM dbo.Journal JLEFT OUTER JOIN dbo.Categories C ON J.CategoryID = C.CategoryIDWHERE--DATENAME(weekday, Started) =@Weekday  AND Started >= @StartDate ORDER BY Day, Category, Started
View 6 Replies
View Related
Mar 28, 2013
We are using SSRS 2012. We have a report that conditionally formats a background color for some cells. The report renders properly in a browser and in Excel 2003 format. In Excel format all cells after the first one that meets the condition are highlighted, even if only one cell should.
The sample expression that triggers this condition looks like this:
=IIF(Fields!VIOL_NOTE.Value="Internal","Green","No Color")
All cells after the first one that meets the condition Fields!VIOL_NOTE.Value="Internal" have a green background.
Excel 2003 (proper) results:
Excel (improper) results:
View 9 Replies
View Related
Nov 7, 2007
Firstly sorry if this already exists but I can't find it the answer anywhere.
I'm running Visual Studio 2005 Reporting Service. I have a SQL query which is reutrning a count of second which I need to display in HHH:MMS format.
integer value = 144322 which is displaying as 16:05:22 or 02/01/1900 16::05
the end result needs to be 40:05:22
It is quite visable what SQL is doing but I am having big issues around how to reach the result.
Any help much appreciated.
SUM(Call_Length) AS Total_Talk_secs,
DATEADD(second, SUM(Call_Length), '00:00:00') AS Total_Talk_Time,
View 4 Replies
View Related
Oct 22, 2015
I am trying to do an IF statement based on the parameter (Average or Total). However I am struggling with how to put the two together.
=Floor(Sum(Fields!Avg_ACD_Time.Value)/ 3600) &":"& Format(DateAdd("s",Sum(Fields!Avg_ACD_Time.Value), "00:00"), "mm:ss")
=IIF(Parameters!ReportType.Value="Average", Sum(Fields!ACD_Calls.Value)/CountRows(), Sum(Fields!ACD_Calls.Value))
View 5 Replies
View Related
Jun 1, 2015
Need to display current time in below format:
06/01/2015 at 7:00 a PST
(Date at time TimeZone)
View 2 Replies
View Related
Aug 20, 2015
How do we convert int datatype to "time format" like hh:mm:ss
ex:Â Â Â 123092 Â ( this 12Â + 30 min + 92 sec)
      131137  ( 13 + 11 min + 37 sec)
      111747 ( 11 + 17 min + 47 sec)
View 5 Replies
View Related
Sep 19, 2007
Hello,I need to create a column that will store hours bigger than 24. Forexample '25:00:00', '129:23:12', etc).That column will be used too, for perform calculations betweendatetime intervals: 'time'.In MySQL there is a datatype that perfect fits that necessity.Does anyone know what is the corresponding datatype in SQL Server?Thanks a lot!
View 4 Replies
View Related
Nov 18, 2005
how do you convert a numeric to time format if it shows hours but a decimal figure for Minutes. For example if I have hours in decimal format like this
28.5000
but I want to show it in this format:
28:30:00
where 28 = hours, 30 = minutes, 00 = seconds
Thanks.
View 4 Replies
View Related
Apr 28, 2008
In Reporting Services, I have a decimal time field (18,2) in my report which I wish to display as HH:MM. Similarly, I req a sum of total hours and minutes as a summary. Whats the expression for doing this. I've googled far and wide and cannot find a definitve solution.
Thanks.
View 2 Replies
View Related
Mar 3, 2008
I have a field that currently is displaying time in decimal form. I would like to convert it to time format. For example: when it displays 6.46 I would like it to be converted to 00:06:27. Can I do this within reporting services?
View 8 Replies
View Related
Oct 28, 2015
I have created 1 report with 2 datasets. This report is attached to the 1st dataset.For example,1st one is "Smallappliances", 2nd is "Largeappliances".
I created a tablix and, the 1st column extracts Total sales per Sales person between 2 dates from 1st dataset (Small appliances). I used running values expression and it works fine.
Now, I would like to add another column that extracts Total sales per sales person between 2 dates from 2nd dataset (Large appliances). I am aware that I need to use Lookup expression and it is giving me the single sales value rather than the total sales values. So, I wanted to use RunningValue expression within lookup table to get total sales for large appliances.
This is the lookup expression that I added for the 2nd column.
=Lookup(Fields!salesperson.Value,Fields!sales_person.Value,RunningValue(Fields!sales_amount.Value,
sum, " sales_person"),
"Largeappliances").
I get this error when I preview the report.An error occurred during local report processing.The definition of the report is invalid.An unexpected error occurred in report processing.
(processing): (SortExpression ++ m_context.ExpressionType)
View 7 Replies
View Related
Jun 14, 2007
Dear all,
i have one table that colum is
164020 ---- that on convert into hh:mm:ss like 16:40:20
advance thanks
View 2 Replies
View Related
Oct 12, 2015
I am reading a data source where all data in a given column is held as a string containing a percent value with 2 decimal points:
03.52%
12.32%
92.10%
80.05%
27.92%
100.00%
[...]
etc...
I need to convert these into decimal values with up to four decimal points, like this:
0.352
0.1232
0.9210
0.8005
0.2792
1.0000
I am trying to use the derived column editor but since I am fairly new to this, I am getting my wires crossed. c
1. Remove the % sign from the string -- not sure if I should use TRIM, or REPLACE
2. Divide the value by 100 -- but don't I need to do some sort of type casting first?
3. Do a cast to convert whatever I got into the correct decimals -- perhaps this isn't required if I did step 2 as a typecast to decimals already?
View 6 Replies
View Related
Apr 22, 2015
I want to display Days Hours Mins Format.
I am Having two columns Like below,
Col1 (in days) Â Â col2 (In Hours : Mins)
3days 4:5Â
In this first have to  add Col1 and Col2 (Here one day is equals to 9 hours ) so the addition is 31.5
From this 31.5 I should display 3 Days 4 Hours 30 Mins because 31.5 contains 3 (9 hours) days 4 Hours and .5 is equals to 30 mins.
View 6 Replies
View Related
Aug 7, 2007
Hi all,
I have created a report in SSRS 2005 which is being viewed by users from different Time Zones.
I have a dataset which has a field of type datetime (UTC). Now I would like to display this Date according to the User Time Zone.
For example if the date is August 07, 2007 10:00 AM UTC,
then I would like to display it as August 07, 2007 03:30 PM IST if the user Time Zone is IST.
Similarly for other Time Zones it should display the time accordingly.
Is this possible in SSRS 2005?
Any pointers will be usefull...
Thanks in advance
sudheer racha.
View 5 Replies
View Related
Feb 13, 2008
I have a brand-new Toshiba laptop, running Vista Business, that I installed SQL Express onto. Prior to installation, I was sure to install all the requisite IIS components so SSRS would install.
The installation ran fine -- installed all components. The configuration ran fine. Everything that is supposed to be green shows green
But, when I go to http://localhost/ReportServer, I get:
Server Error in Application "Default Web Site/ReportServer"
--------------------------------------------------------------------------------
HTTP Error 404.2 - Not Found
Description: The page you are requesting cannot be served because of the ISAPI and CGI Restriction list settings on the Web server.
Error Code: 0x800704ec
Notification: ExecuteRequestHandler
Module: IsapiModule
Requested URL: http://localhost:80/ReportServer
Physical Path: C:Program FilesMicrosoft SQL ServerMSSQL.2Reporting ServicesReportServer
Logon User: Anonymous
Logon Method: Anonymous
Handler: AboMapperCustom-34881
Most likely causes:
No handler mapping for this request was found. A feature may have to be installed.
The Web service extension for the requested resource is not enabled on the server.
The mapping for the extension points to the incorrect location.
The extension was misspelled in the browser or the Web server.
What you can try:
Install the feature that handles this request. For example, if you get this error for an .ASPX page, you may have to install ASP.NET via IIS setup.
Verify that the Web service extension requested is enabled on the server.
Open the IIS Manager and navigate to the server level.
In the Features view, double-click ISAPI and CGI Restrictions to verify that the Web service extension is set to Allowed.
If the extension is not in the list, click Add in the Actions pane.
In the Add ISAPI and CGI Restrictions dialog box, type the path of the .dll or .exe file in the ISAPI or CGI Path box, or click Browse to navigate to the location of the file.
In the Description box, type a brief description of the restriction.
(Optional) Check "Allow extension path to execute" to allow the restriction to run automatically. If you do not check this option, the restriction status is Not Allowed, which is the default. You can allow the restriction later by selecting it and clicking Allow on the Actions pane.
Click OK.
NOTE: Make sure that this Web service extension or CGI is needed for your Web server before adding it to the list.
Verify that the location of the extension is correct.
Verify that the URL for the extension is spelled correctly both in the browser and the Web server.
Create a tracing rule to track failed requests for this HTTP status code. For more information about creating a tracing rule for failed requests, click here.
More Information... This error occurs when the necessary Web service extension is not enabled, the location or the name of the extension are misspelled or incorrectly entered.
--------------------------------------------------------------------------------
Server Version Information: Internet Information Services 7.0.
The only lead I could find when I googled this error was a reference to running appcmd to ensure that asp.net was enabled. It sure looks like it is:
C:WindowsSystem32inetsrv>appcmd list config -section:isapiCgiRestriction
<system.webServer>
<security>
<isapiCgiRestriction>
<add path="%windir%system32inetsrvasp.dll" allowed="true" groupId="ASP" description="Active Server Pages" />
<add path="%windir%Microsoft.NETFrameworkv2.0.50727aspnet_isapi.dll" allowed="true" groupId="ASP.NET v2.0.50727" description="ASP.NET v2.0.50727" />
</isapiCgiRestriction>
</security>
</system.webServer>
C:WindowsSystem32inetsrv>
Honestly... I'm out of ideas. I've been messing with this for 8 hours now, and I'm ready to fling the laptop out the window. I've completely UNinstalled SQL Server, IIS, reinstalled both, repeated the uninstall/reinstall after double-checking all files were deleted, and so on.
Does *anyone* know how to resolve this error? I checked IIS.NET and although they have a few references to it (not within the Reporting Services context) there never seems to be a definitive answer as to what the solution is.
View 17 Replies
View Related
Jun 6, 2007
Dear All,
I have a problem formatting a field in Reporting Services (minutes to hours).
I have a field called duration which stores time in whole minutes only. I can format this into hours within mssql using the following:
cast(sn.duration/60 as varchar(5)) + ':' + RIGHT('0' + cast(sn.duration%60 as varchar(2)), 2)
But I need to have totals and average columns in my report, which means that the data must come through to RS in the minutes format so I can perform the calculations there.
I have the first part (I think!!):
=string.format("{0:0}",Fields!SalesTime.Value / 60) + ":"
But I cannot get the minutes part working!
Any help would be gratefully received.
Dan
View 3 Replies
View Related
Aug 19, 2015
I have created SSRS report which has many overlapping objects, the output in PDF format seems to good but in word format it is not giving the required output.
View 5 Replies
View Related
Jul 24, 2006
Hello!
I would like to cast (convert) data type decimal(24,4) to
decimal(21,4). I could not do this using standard casting function
CAST(@variable as decimal(21,4)) or CONVERT(decimal(21,4),@variable)
because of the following error: "Arithmetic overflow error converting
numeric to data type numeric." Is that because of possible loss of the
value?
Thanks for giving me any advice,
Ziga
View 6 Replies
View Related
Oct 21, 2015
How can I round up a decimal number? in SSRS reports.
View 7 Replies
View Related
Aug 12, 2012
Filtrate the value in the column by using filter function..I get error message due to decimal and double.How should I convert to value 55 into double or decimal? Today, I'm using SSRS 2012.
View 4 Replies
View Related
Jul 23, 2005
I'd like to convert a Decimal value into a string so that the entireoriginal value and length remains intact but there is no decimal point.For example, the decimal value 6.250 is selected as 06250.Can this be done?
View 6 Replies
View Related
Nov 30, 2007
Hi all,
I am designing some reports for a German branch of my company and need to replace decimal point with a comma and the thousand comma seperator with a decimal point.
e.g.
‚¬1,500,123.00 to ‚¬1.500.123,00
Is there a property that I can change in the report designer to allow this to happen or is this something I need to convert in a Stored Proc.
Any help would be much appreciated
Thanks!
View 5 Replies
View Related
