I have 6 separate mailing label like reports with a textbox inside a cell. I tried to join them into one report with subreports"but" it does not work since you need the print layout in order to get both columns to show. What is the best way to accomplish this task?
View 5 RepliesI am creating a report to be used to print mailing labels. Size 1" x 2 5/8" (3 columns of 10 labels). I seem to have everything but the vertical spacing working properly. I have used a rectangle set to the size of the labels which contains a list box containing text boxes containing expressions to pull in the fields. Some of the street addresses are two lines with the majority being only one line.
I have joined the two fields containing the street addresses and inserted a new line command so each field will print on its own line but yet be contained within the same text box. Everything except the text box containing the street addresses are set to not increase or decrease. My problem is that on the pages of the report where labels vary between the one and two line street addresses the labels tend to creep down which in some cases causes data to be printed over two labels. Any ideas on what I can do to format these to print properly?
Thanks
I have a sheet of mailing labels in which the first three rows have been used. I want a parameter or something when running an SSRS label report where I can specify what row to begin printing on and how many rows I want to print. Is that possible?
View 8 Replies View RelatedI developed a rdlc report. I have a graph chart. Sometimes the value of a label can =0. If the value =0 I want to hide the labelname. However, I also have dummy values =0. This is so that I can have spaces between the bars. The dummy values labels isn't shown in the graph. This works great. I need to add to the expression that if the name of the label isn't dummy but the value =0 to hide the labelname.
The data from sql:
Expression in graph under chart data->category groups->category group properties->label:
=Microsoft.VisualBasic.Interaction.SWITCH(Fields!LabelName.Value = "aTotalForRetire", "Retirement", Fields!LabelName.Value = "cTotalForRelatives", "Relatives", Fields!LabelName.Value = "eTotalForDisability",
"Disability")
The result is below. I want to hide the label relatives as in this example the value=0. It will not always be the case. How can I do that?
Data lables in ssrs reports are getting overlapped in stacked chart. Since it is satcked chart i can't place labels outside the bar.Due to this it is not visible clearly. how to avoid this issue?
View 7 Replies View RelatedHi!
I have these tables:
DB1
MID
IIN
Title
FullName
Address
Apt
City
Province
PostalCode
DB2
MID
Lang
Version
How can I output a text file formatted like the one below?
(05) 01046 (F 05)
Mr. Sylvain Cote
123 Sesame Street
Apt 6
Charny, BC
L8T 5G6
where
(05)-MID
01046-IIN
(F 05) - Lang
$3.99/yr .COM!
http://www.greatdomains4less.com
Ok, I'm an idiot. Does anyone out there have some step by step instructions for creating a report that will do mailing labels. I've got multiple columns on my report but I end up with the contents of each column being the same across each grouping/row. In other words for each record read, since I have three columns, I get three occurances of each customer and address until all the data selected for that row is presented, then I go to the next customer which again is repeated across all three columns.
I'm sorry I'm so stupid, but I've looked at other entries on the forum, and I just can't figure it out. We are trying to get out from underneith Business objects thumb and any help would be greatly appreciated. Thanks! - Eric -
I am trying to print mailing labels and suppress optional address lines to eliminate white space while maintaining label alignment. This is what I am trying but it does not work.
I create a function that determines the length of a field (i.e. street) and increments a counter if the length is zero. It also takes a second parameter that detremines whether to reset the counter. I then use the function in the visibility each row of the label table. Example iif(Code.LineLen(Fields!Street.Value)=0,True,False). I place this on the visibility of each row except the last as that is City,State,Zip and is required. On this last row the expession I use is
=Fields!city.Value & ", " & Fields!state.Value & " " & Fields!zip.Value & iif(Code.LineCount<5,StrDup(5-Code.LineCount,vbCRLF),""). What this is intended to do is print a carraige return and line feed for every row that did not print. Instead no line feeds occur. I have verified that the Code.LineCount is indeed calculating correctly (I printed the value). I've removed the conditional to make sure it has no issues but again nothing. For clarification the code block I am using is this.
Public LineCount as Integer=0
Function LineLen(byval LineIn as string,byval IsFirst as boolean) as Integer
if IsFirst=True then
LineCount=1
end if
If len(LineIn)>0 then
LineCount=LineCount+1
end if
LineLen=Len(LineIn)
end Function
So if anyone either knows why the line feeds do not occur or a better way to handle this please let me know. Thanks.
How can i write diffrent Queries in Data set using If...Else Conditions at the time of report Design.
Regards.
Is it possible to have the value labels always on top of the bars of a bar chart?
On the Chart Series Labels properties under Appearance, I used Top for Position, but if the bar reaches the top of the chart area (and that is determined automaticaly by the Y Axis that and can't be a fixed value).
Is it possible to repeat the row labels for matrix reports where there are multiple groups. So if the matrix report rows are department,division,employee then have all three labels show up on each row not just at the breaks. Cannot seem to find a way to do this. thanks
View 1 Replies View Relatedhow can i create a report like this format in SSRS ? In this format grouping will be applied on Phase code and tablix/matrix will be repeated the same way like shown above.The headers must repeat on the next pages too.Web Developer / Web Designer / Software Developer / UI Designer
View 5 Replies View RelatedI use BIDS 2008 R2 and I have a SQL script that works fine and gives me the desired output in SQL Management studio.
declare @dt datetime
select @dt = '2015-09-10 08:23:28.000'
select
ref_id
,desn
,tran_date
,payment_due
,ref1
,gross_val
from acptran (nolock) where seq_id in (select seq_id from acptcash (nolock) where date_time = @dt)
order by ref_id,ref1
However i need to create a report so that someone else can enter the date time as a parameter in a report to get the required results. Normally i would drop my SQL script into BIDS and it would create the dataset but as this has a declared value it gives an error "The Declare SQL construct or statement is not supported."
Some labels such as 33314 are displaying over the columns. I need all labels to display at the top. How can I fix this without changing the size of the chart?
View 4 Replies View RelatedI am counting order type by a field which can have 3 different values.In a stacked column chart I am displaying the count of those different values, and showing a data label with the count for each order type. See screenshot.
Now I would like to show a line based on the total of each order type. I can see that SSRS already know the number of each order type as it is shown in the labels.
How do I add those numbers (shown in the labels) together and get it into a Total field? I would prefer not to alter my SQL query, if possible.
i would like to show all Labels available in a Chart and rotate the Labels 90°. How can i do that ? I changed the Propertie "Interval" to 1, "LabelsAngle" to 90, "LabelsAutoFitDisabled" to true in my Chart Axis.
View 12 Replies View RelatedHi,
Will someone please tell me how to create Report history(snapshots) in reporting service 2005.
Thanks and regards
Altaf Nizamuddin
I have VS 2013 Express and SQL Server 2014 (dev. license). I've created some projects in VS where I connect to SQL 2014 Dbs with stored procedures, functions, the usual suspects. Additionally I have Report Builder 3.0. I downloaded and installed SSDT-BI but it doesn't seem to like my VS2013 Express projects any more than I, evidently, like it. So I'm at a loss to understand how to use it to generate reports I can putt on the server and call with my projects. In short, I absolutely don't understand this stuff.I think I want to write reports using Report Builder 3.0 that I can save to my SQL Server Report Server and run from a VS2013 Express Project.
View 10 Replies View RelatedI Want to Create Drill Down Report in SSRS . Here we Should Display Year Wise ,Month Wise, Day Wise For Particular party Salry . How To Do it?
View 2 Replies View RelatedWhat is the best optimised options to display the date labels with bi-weekly intervals starting date Date from one month to three months future from the current date?
As per above requirements, I have built the below line graph query and graph, currently it only displays the date labels as per data but I need to display date labels with bi-weekly intervals starting date from one month to three months future from the current date. Also another issue found, if there are few more date labels then does not show all labels on horizontal axis.
Select
/* Set Week End date as Sunday */
DATEADD(DAY, 7 - DATEPART(WEEKDAY, t.TaskBaseline0FinishDate), CAST(t.TaskBaseline0FinishDate
+1 AS DATE)) as[WeekEnd]
,count(t.TaskBaseline0FinishDate) as Baseline
,count(t.TaskFinishDate) as Finish
[Code] .....
When I tried to create a bar chart using SSRS 2012, the vertical axis values are repeating for smaller data sets values. It's only happening when the data labels are below 5, when the data is above 5 this chart represents data fine.
I tried specifying the custom intervals and this option all together eliminated the bar for value 1, instead it only showed the value 1 as text on the chart.
I tried changing the data interval type as number and the data type is of Integer, these are counts which I am showing in the chart.
We migrated ssrs from 2008 to ssrs 2014.after that we need to move only subscriptions to New 2014 report server DB.
How to proceed that.
I am trying to insert record in DB. But subscription ID is not identity column. How to do this.
Can I place old Subscription IDS in New 2014 reporting DB?
I am using the below expression for hidding the zero data labels in ssrs chart.=IIF(Fields!Name.Value=0,False,True). But this expression is working for some other charts. It is not wrking for only charts. I could not find the solution for that. How to hide the zero values.
View 4 Replies View RelatedWe have a need to report on historical data when none exists in the database.
Create a tabular report rdl that is run on a regular schedule. This report run is saved as an Excel sheet that overwrites the previous run, which has the same name.
Report is designed to use two data sources--the database and and the previously run Excel sheet. The data is "merged" using the Lookup function thereby creating a new report that includes the history needed.
how to create indented child rows under the parent, in SSRS report. I am quite new to SSRS, the group by function works in a different (and obvious) way then what I want.I have a sample dataset as below.
Declare @Employee Table(Code varchar(10), Name varchar(500),
Organization varchar(100), IsChild bit, ParentId varchar(10))
insert into @Employee Values('BR456','Brandon','XYZ',0,NULL)
insert into @Employee Values('CR674','Carolina','ABC',0,NULL)
insert into @Employee Values('ME230','Melissa','PQR',1,'CR674')
insert into @Employee Values('JR987','Jerome','LMN',0,NULL)
insert into @Employee Values('JO435','Joseph','IJK',0,NULL)
insert into @Employee Values('ME321','Meghan','UVW',1,'JO435')
Is it possible to make this using some formatting options?
whenever I try to create a PowerView report on an existing powerpivot- excel sheet I get following error:"An error occurred while loading the model for the item or data source 'xxx'. Verify that the connection information is correct and that you have permissions to access the data source." Error details:
<detail><ErrorCode xmlns="http://www.microsoft.com/sql/reportingservices">rsCannotRetrieveModel</ErrorCode><HttpStatus xmlns="http://www.microsoft.com/sql/reportingservices">400</HttpStatus><Message xmlns="http://www.microsoft.com/sql/reportingservices">An error occurred while loading the model for the item or data source 'http://intranet/PowerPivot/PowerPivot-Galerie/Mappe1.xlsx'. Verify that the connection information is correct and that you have permissions to access the data source.</Message>
[code]...
When I try to open the PowerPivot sheet form Power Pivot Gallery and click on any filter I receive following message: An error occurred during an attempt to establish a connection to the external data source. The following connections failed to refresh: PowerPivot Data.
I need to create an report from SSRS and then exported it in excel for the user. It has dynamic header/footer and dynamic excel sheet name. The developer told that it is not possible to have both the things dynamic.
View 2 Replies View RelatedI have a report designed in SSRS 2008 R2.My issue is that the data labels do not stay outside the bars for high values.
View 4 Replies View RelatedI am in the process of creating a Report, and in this, i need ONLY the row groups (Parents and Child).I have a Parent group field called "Dept", and its corresponding field is MacID.I cannot create a child group or Column group (because that's not what i want).I am then inserting rows below MacID, and then i toggle the other rows to MacID and MacID to Dept.
View 3 Replies View RelatedHi, i am a newbie to reporting services.
Am trying to create a mailing label report so that it can pull out the details from the database and gets printed onto the label stickers correctly. However, no matter how i adjust the sizes of the report from the page properties, it's still not printed properly.
I have 7 label stickers on 1 mailing page, so let's say i have 13 records, that will be 2 mailing pages. Each label sticker is about 9cm width by 3.6 cm height. The gap between each label sticker is 0.2 cm
Can anyone advise me on how to go about doing it? By the way, i am using SSRS 2000.
Any help is appreciated. Thanks :)
i am once again working with mailing labels. I have designed the report in SQL Server Reporting Services to print in 3 columns with a body size of 2.625" wide by 1.00" high; a rectangle the same size which then contains a list the same size which contains the data fields. I get fairly good results when I print to one printer however, there does seem to be a bit of "creep" on the page. The problem really shows when trying to print to another network printer where when a user prints the report (labels) by the end of the page data is printing outside of the label margins. are there some properties that I'm missing that would prevent this or could this be related to printer settings?
View 4 Replies View RelatedI just created a report builder. I have a main report and i wanted to create a sub report. why i cant or i cant view the path or the folder of my .rdl file to be use as my sub report.
View 5 Replies View RelatedHi There,
Our DBA has installed reporting services on a server and now in order to access the report manager, one has to be an Admin on that Server. I am guessing that there is a mistake in the configuration of Reporting Services. Usually it should allow anybody who was added to the roles in the properties section of the Report Manager, right? I have also added the users to the DB..
Also I am using Windows Authentication to access Report Catalog items (Reporting Services is installed on Server2) from a web Application(deployed on Server1) and displaying the report using report viewer. For some reason, server1 has to be in an Admin role on Server2 to access the report catalog/report. This is kinda strange for me as I don't want everybody to be an Admin on Server2. Can anybody please point in the right direction?
Thanks.