We have recently migrated to SSRS2012 and since this time any report with a gauge or a chart within will not render. Upon researching even newly created reports will not render them.Â
View 2 RepliesI'm having problem with Charts
any good website or books i can read up on
just can't anything good on charts
I need to use 2 pie chart and 1 bar chart but i can't get it to work like i wanted to
I'm not sure what Series and Category is used and how to stack the fields in the Charts
Hi,
I am new to reporting services and I am stuck. I have a report I am trying to design, it has startdate and end date as parameters, I als have a non-queried parameter with the values of month,week,user,hour. These parameter values create a drowndown box on the report, What I am trying to figure out is how to display information in a chart depending on which item is selected i.e (month,week,user etc....). The original report is in access and I am converting it to reporting services, I know there is third party software out there but, I really want to use reporting services.
hey there
Happy New Year to you all.
in RS 2005
in layout tab
I have four columns in my table
col 1 (group on Company)
col 2 (group on application)
col 3 (count on id no) // total field (count/idno) // max/idno)
col 4 (graph) as I want this to show line by line (visual statement)
I read you need to put that max field in to help with graph. in the Y axis Max field
Unfortunately I either didn't read it properly or I am doing something really wrong.
My graph is not showing correctly - eg one line has 2 in it and is showing more than a line that has 227.
call id is in data of the graph
company name is in series of the graph
can someone explain what I am doing wrong please
thanks
jewel
Hi all,I have created on Chart using Chart control
But legend names are by default 'Series1','Series2'.
How to change these names according to x and y axis values names.
Help me
I'm using Reporting Services 2005 SP1 and wrote some code to render reports server-side.
My sample report has few parameters that must be passed so I pass these parameters with code.
<My code>
ReportServiceExecution.ReportExecutionService rs = new ReportServiceExecution.ReportExecutionService();
rs.Credentials = System.Net.CredentialCache.DefaultCredentials;
string extension, mimeType, encoding;
ReportServiceExecution.Warning[] warnings;
string[] streamID;
ParameterValue[] parameters = new ParameterValue[2];
parameters[0] = new ParameterValue();
parameters[0].Name = "pID";
parameters[0].Value = "6548747";
parameters[1] = new ParameterValue();
parameters[1].Name = "pClass";
parameters[1].Value = "8";
ExecutionHeader header = new ExecutionHeader();
ExecutionInfo executionInfo = rs.LoadReport(reportPayslip.Name, null);
executionInfo = rs.SetExecutionParameters(parameters, "en-us");
rs.ExecutionHeaderValue = header;
rs.ExecutionHeaderValue.ExecutionID = executionInfo.ExecutionID;
byte[] report = rs.Render("PDF", "<DeviceInfo><Toolbar>False</Toolbar></DeviceInfo>", out extension, out mimeType, out encoding, out warnings, out streamID);
</My code>
Actually, I have several more parameters but I've checked the collection and all the parameters I want are there and have values. Their names match those found in executionInfo.Parameters. But when I run my code I get the following error on Render():
<Error>
"This report requires a default or user-defined value for the report parameter 'pClass'. To run or subscribe to this report, you must provide a parameter value. ---> This report requires a default or user-defined value for the report parameter 'pClass'. To run or subscribe to this report, you must provide a parameter value. ---> This report requires a default or user-defined value for the report parameter 'pClass'. To run or subscribe to this report, you must provide a parameter value."
</Error>
I've double-checked and my parameter array does have the problematic parameter, I passed it a value but when I check executionInfo.Parameters I see that it's the only parameter that hasn't been give a default value after calling SetExecutionParameters(). So my parameters do seem to be passed but one seems to refuse getting a value. If I comment out the SetExecutionParameters() line I get, as expected a similar error but on another parameter (first one in the executionInfo.Parameters collection). So I'm left to beleive that the SetExecutionParameters() has some kind of bug as it works for all but one parameter. I've checked casing, spelling, tried passing phony parameters and from what I've seen I should be getting an error when I pass the parameters if I got something wrong.
Any help would be much appreciated.
I have some data from SQL server which contains NULL values for certain fields. I have to create a chart with sum of a field. There is no category and series groups, we are just showing the total sum of a field in chart. Since I have NULL in my source data, nothing is displayed in the chart. I cannot exclude this record from dataset as I have to use this record for other charts. I have to do some filtering in the chart area itself. I have given IsNothing() in the filter of chart properties. It does not work for me. Even I tried to give IsNothing() in the exp of  Sum() .
View 6 Replies View RelatedI have been asked to derive a bar charts in SSRS. Each bar would represents a different category and each bar should come with different colors. No. of categories might vary every time, it is not fixed. How to achieve this dynamically?
View 2 Replies View RelatedI need some help regarding Custom Colors implementation for Charts in the Reporting Services.
What we are trying to do is to make every color for every Series(see example below) to be a customized Corporate color.
For example each of the series on the Chart should be in specific Custom Color:
Series 1 - "LightBlue"
Series 2 - "LightYellow"
Series 3 - "DarkBrown"
All I found from MSDN is how to do it in the Chart Properties in a Code section (right click on the report outside the chart -> Properties -> Code tab -> paste the Custom Code ).
And then to use it in the Chart color definition as:
Code Snippet=Code.GetColor( Series# )
But we are trying to do it in a separate C# class that would be updated only in one place, instead of changing 30 reports each time something is changed. So that it could be generic.
The C# class:
Code Snippet
namespace CustomColorPalette
{
public class CustomPalette
{
public CustomPalette()
{
}
public static string GetColor(string GroupingValue)
{
int groupingValue = int.Parse(GroupingValue);
string[] colorPalette = {"Green", "Blue", "Red"};
if (groupingValue < colorPalette.Length)
{
return colorPalette.GetValue(groupingValue).ToString();
}
else
{
return "Black"; // if # of Series is more than defined - all undefined will be = Black color
}
}
}
}
I tried 2 different ways:
1.
Then I put a code into a Custom Code section of a report:
Code Snippet
Public Function GetColor(SeriesNumber as String)
Return CustomColorPalette.CustomPalette.GetColor(SeriesNumber)
End Function
And in the Chart Custom Color settings I put:
Code Snippet=Code.GetColor( Fields!SeriesNumber.Value )
And after compilation I get an error:
Error 303 [rsCompilerErrorInCode] There is an error on line 2 of custom code: [BC30451] Name 'CustomColorPalette' is not declared. c:developmentvoyagerreportsvoyager convert reports.rootvoyager convert reportsReport_007D.rdl 0 0
2.
Second way I tried:
Then I put a code into a Custom Code section of a report:
Code Snippet
Dim X As CustomColorPalette.CustomPalette
Protected Overrides Sub OnInit()
X = new CustomColorPalette.CustomPalette()
End Sub
And in the Chart Custom Color I put:
Code Snippet=Code.X.GetColor( Fields!SeriesNumber.Value )
And after compilation I am getting an error like this:
Error 302 [rsCompilerErrorInExpression] The BackgroundColor expression for the chart €˜chart2€™ contains an error: [BC30456] 'X' is not a member of 'ReportExprHostImpl.CustomCodeProxy'. c:developmentvoyagerreportsvoyager convert reports.rootvoyager convert reportsReport_007D.rdl 0 0
Is there any workaround? Or all I can do is to make the Custom Colors manually in each report, and if something need to be changed - I will need to change it in each report separately
Thanks,
Alex
We use Reporting Services for most of our reporting needs internally. However, we do have several products that we ship out into the field that run off local databases. These applications require reporting but often are not big enough for SQL Server and rarely run on a server with IIS.
Since MS has made .RDL an open xml standard does anyone know if there are any client rendering engines being developed? We would like the ability to develop all of our reports in .RDL and have them rendered in Reporting Services or in our standalone apps that run off MSDE or Access. Currently this is not possible. But, I think that someone could write a client renderer (like Crystal Reports has) to allow the use of .RDL files off a local data source without SQL Server and Web Services.
Thanks for any info on the subject.
Smoke
I have created reports using Reporting Services and the problem I am having is with the Print Layout. I view a report with parameters and print. I then change the parameters and click 'View Report' again and the new report is displayed. However, the report does not refresh in the Print Layout, so if I try to print the 2nd report, the first report is the one that is printed. Any ideas how to solve this?
Thanks
I'm looking to build a report that is basically a series of line charts that is plotting a value over time. Â I can accomplish this one chart/dataset at a time, but I believe with 'List's this can be achieved in a more automated fashion.If I have some data similar to this:
Area_ID, Location_Name, DataValue, ReadingDate
1,Site1,100,1990-10-10
1,Site1,110,1990-11-11
1,Site2,105,1994-01-07
1,Site2,105,1994-02-07
2,Site3,113,1994-06-02
2,Site3,120,1994-07-30
2,Site4,120,1994-06-30
2,Site4,120,1994-07-30
I want the charts grouped by the Area_ID, and then each Location_Name is a Series in that chart. Â So in this example, I would end up with 2 charts (Areas 1 & 2), each have 2 series (Area 1: Site1, Site2 and Area 2: Site3, Site4)Is it possible to build this with a list? or do I need to structure the data differently?
I am able to preview my report in Microsoft Visual Studio with a chart embedded at the top of the report. However after uploading the report to Report Manager, the chart is blank. How can I get the chart to be visible in Report Manager? I am using SQL Server 2012 on a Windows Server 2012 R2 machine. I can see the chart if I edit the report in Report Building in the print layout mode. I can also see the chart in my Microsoft Visual Studio Project.
View 5 Replies View RelatedI have a column bar chart which displays values for each month. As per the requirement, I am displaying the column values by selecting "Show labels" options. I see few values overlap on the column bars.
View 2 Replies View RelatedI have 2 reports in a single report
Report 1:Â This report has a tablix and a pie chart which displays member counts for genders.Dataset is written such that the gender names are always displayed in the tablix even when the count is Zero for Female and Male
Report 2:Â This report has a tablix and a pie chart which displays member counts for category Age.Dataset is written such that the age category names are always displayed in the tablix even when the count is Zero for age categories
Both Report 1 and Report 2 are place in separate rectangles and then these 2 rectangles are place in one single rectangle.Now I want to hide this main rectangle with an expression.
My system environment: win2008 R2 SP1 64bit + SQL 2005 SP4 32bit
I amended the configuration file of rsreportserver.config with the below:
<Extension Name="CSV" Type="Microsoft.ReportingServices.Rendering.CsvRenderer.CsvReport,Microsoft.ReportingServices.CsvRendering" >
  <Configuration>
  <DeviceInfo>
   <Encoding>UTF-8</Encoding>
  </DeviceInfo>
  </Configuration>
  </Extension>
If I run the report and then click export by selecting the csv format, it looks ok with the encoding of UTF-8.
However, the same report , when I created a subscription and saved it in the hard driver. Its encoding became USC-2 Little Endian.
Calculating % of Column Total in Charts...
Doing this exercise in Excel is always very simple:Â
I am currently migrating several Crystal Reports that have charts. The chart series is set to use the TopN values in a count, and combine the rest of the series into one series titled "Other". I see how to filter the chart using TopN, however I need to still show the rest of the data grouped as "Other". I think the solution I need is to create a group expression that uses some sort of IIF function to create the "Other" group, but I haven't found a function that I can use to get the results I need. Any ideas?
Scott
I've searched the forums on this issue, haven't really found the answer.
I have several nifty little sales reports which crunch a ton of data quite efficiently and render in just a few seconds in Report Manager. I've pushed as much of the data processing back to the server as possible, use a stored procedure (with parameters) in a shared datasource, don't return unneccessary data, all that. It works great.
When I first developed the reports, I continued generating my charts (which use the same data as the reports, just grouped differently) in Excel and pasting them in as images. Now I want to stop that nonsense and use the SSRS charts. I fooled around with the charting function and got a reasonable facimile of my Excel charts, two per report, which use their own separate stored procedures and the same shared datasource.
Now, reports that used to render in 5-8 seconds may take 1-5 MINUTES. Help! It's definitely the charts--taking them back out fixes the problem.
I have complete control over the datasources--would it make more sense to use non-shared sources, or to create totally separate shared sources? I saw a post that recommended "making data calls non-synchronous," but I have no idea how to do that.
Thanks for any suggestions.
I am building reports using MS Visual Studio, and in the Preview tab I have the Refresh button and a button with a X to stop a report while rendering. However, when I deploy the report to the reporting server and I run it from the application the X button is not there, and users would find it useful sometimes to be able to stop long running reports. Is this a configuration change?
View 2 Replies View RelatedIn SSRS reports i have multiple charts and tables. per page i have to display one chart and one table. How to put page break after the chart and table. I have not used rectangle. I created all the charts and tables in the body area.
View 5 Replies View RelatedI want to Set Rendering Extension Report based,
Example
Report 1Â should have the rendering options of EXCEL and PDF.
Report 2Â should have the rendering extension of EXCEL only.
I referred below link for change the rendering extension. [URL] .... but its for all the reports format.
I have written a custom rendering extension for my reporting services. In one of my function inside custom rendering assembly, I want to access the underlying dataset and manipulate with it. I gain some knowledge on dataextension but not able to use it successfully. Can someone please help me get to underlying dataset?
Thanks.
I have a image in SSRS which is of PNG in format. when I preview the image it is coming as expected but if IÂ export that to PDF the image is having the black color back ground. One more point to be noted here is my actual image file is having a small shading in it which is not visible properly, but the same back ground is coming with full black color line in the PDF form.
Another issue is : I have 3 sub reports in my SSRS report. In the preview I can see the data is coming in order of sub reports but if I export it to PDF the second sub-report data is coming at the end of the report and first and 3rd sub reports are fine. But If I have only one record for 2nd sub-report the order is same in both the Preview page as well as in the PDF format.
I have some HTML stored in a SQL Server table that I want to render in Reporting Services 2008,
HTML data contain HTML table. While generating report, SSRS not able to render it properly as table.
How we can display the HTML data as it is in SSRS 2008?
Hi everyone,
Our system is set up using SQL Server 2000 and Reporting Services for SQL Server 2000. Our web application is built with Visual Studio 2003, C# and .Net Framework 1.1 and is a 3-tier application. On both our localhost and development builds of the application, the images that get rendered do show up properly. On our live build, the images do not.
One difference that we found is that on the live build, users do not have file permission access to our middle tier that is running reporting services. After examining the URL of where the image is trying to point to, we see that it is trying to access the middle tier from the front presentation tier.
My question is, is there a way to send a certain parameter into the Render method to have the images stored somewhere else? Any help would be greatly appreaciated. Here is the code we currently have:
ReportingService rs = new ReportingService();
rs.Credentials = System.Net.CredentialCache.DefaultCredentials;
try
{
//Response.Write("Format: " + format);
if (format == "HTML4.0")
{
// Render arguments
byte[] result = null;
string historyID = null;
string devInfo = "<DeviceInfo><HTMLFragment>True</HTMLFragment></DeviceInfo>";
DataSourceCredentials[] credentials = null;
string showHideToggle = "true";
string encoding;
string mimeType;
Warning[] warnings = null;
ParameterValue[] reportHistoryParameters = null;
string[] streamIDs = null;
ParameterValue[] reportParameters = null;
SessionHeader sh = new SessionHeader();
reportParameters = new ParameterValue[5];
reportParameters[0] = new ParameterValue();
reportParameters[0].Name = "par_userID";
reportParameters[0].Value = userID;
reportParameters[1] = new ParameterValue();
reportParameters[1].Name = "par_menuID";
reportParameters[1].Value = menuID;
reportParameters[2] = new ParameterValue();
reportParameters[2].Name = "par_URL";
reportParameters[2].Value = reportURL;
reportParameters[3] = new ParameterValue();
reportParameters[3].Name = "par_startPage";
reportParameters[3].Value = startPage;
reportParameters[4] = new ParameterValue();
reportParameters[4].Name = "par_endPage";
reportParameters[4].Value = endPage;
//Clean up old files
RemoveFiles(ConfigurationSettings.AppSettings["tempFileLocation"]);
result = rs.Render(reportPath,
format,
historyID,
devInfo,
reportParameters,
credentials,
showHideToggle,
out encoding,
out mimeType,
out reportHistoryParameters,
out warnings,
out streamIDs);
// // For each image stream returned by the call to render,
// // render the stream and save it to the application root
// byte[] image;
// string optionalString = null;
// string tempFilePath = ConfigurationSettings.AppSettings["tempFileLocation"].ToString();
//
// foreach (string streamID in streamIDs)
// {
// image = rs.RenderStream(reportPath,
// "HTML4.0",
// streamID,
// null,
// null,
// reportHistoryParameters,
// out optionalString,
// out optionalString);
//
// FileStream stream = File.OpenWrite(tempFilePath + streamID + ".png");
// stream.Write(image, 0, image.Length);
// stream.Close();
// }
// Write the results to the current Web page
string htmlout = Encoding.ASCII.GetString(result);
htmlout = htmlout.Replace("<hr/>", "");
rs.Dispose();
return htmlout;
}
I'm using ReportingServices 2008 and I've this message "The operation has timed out" when rendering a report with some parameters. I've set in the execution properties of this report : Do not apply the expiration time for the execution of the report.When I look the ExecutionLogStorage table from Report Server DataBase I see that I've no message for this report when timeRendering is 21109ms. When I change the report parameters to obtain more data, the timeRendering is 76866ms and I've the message "The operation has timed out".
View 9 Replies View RelatedI rendered this xml from SSRS 2008. Is there a way to avoid the "details_Collection" tab in the rendered xml doc. Please see the colored tabs. These tabs are created from groups named Company and Info.
View 9 Replies View RelatedI have a requirement to display each student Fitness test results in the form of a Box plot chart with High Whisker , Low whisker , Low box,high box , Mean and Median in a stored procedure since test areas are dynamic. But , i have never done this before.
Test Type
TestSeq
Test Date
Student ID
TestArea
Test Result
[code]...
I am trying to export ssrs report from sharepoint to pdf file.But i am getting error in it."Sorry, Something Went Wrong".But when i try to render report in visual studio when i preview report. It gets exported in 14 minutes. but there is no error.
View 2 Replies View RelatedWe run std 2008.  In my ssrs log I see this for one of our most critical reports...
library!ReportServer_0-64!2244!07/07/2015-08:24:53:: Call to GetPermissionsAction(/somedirectory/somedirectory1).... which I assume is an indication of a report starting to render by first checking permissions.
Around the time my user says he still saw the revolving arrow and he stopped the report because he felt it was running too long, I see...
webserver!ReportServer_0-64!1dbc!07/07/2015-08:54:44:: i INFO: Processed report. Report='/somedirectory/somedirectory1/importantreport', Stream=''
How can it be true that he stopped it and ssrs reports that it processed the report?
About 4 minutes later I see this entry in the log...
webserver!ReportServer_0-64!15e4!07/07/2015-08:58:34:: i INFO: Processed report. Report='/somedirectory/somedirectory1/importantreport', Stream=''
Which processed report message is right? Could there be multiples cuz of subreports? I see a number of errors and exceptions around these same times but do not know how to tie either to a specific report. Is there a way?
We are facing an issue where the report rendering for specific report parameters is failing with an exceptionÂ
Throwing Microsoft.ReportingServices.ReportProcessing.UnhandledReportRenderingException: , Microsoft.ReportingServices.ReportProcessing.UnhandledReportRenderingException: An error occurred during rendering of the report. ---> Microsoft.ReportingServices.OnDemandReportRendering.ReportRenderingException: An error occurred during rendering of the report. ---> System.NullReferenceException: Object reference not set to an instance of an object.
at Microsoft.ReportingServices.Rendering.SPBProcessing.Tablix.TablixContext.CalculateDetailCell(PageItem topItem, Int32 colIndex, Boolean collect, PageContext pageContext)
[code]....
The server is running in Native mode. We tried restarting the services and also verified the disk space. Neither of them worked. The ExecutionLog3 table in the "ReportServer" database shows a rrenderingError as the report execution status. Report rendering with Excel format works fine.We enabled verbose logs and they are shared here. URL....
I need to create a report in SSRS 2015 but I need to bind that report to an external dataset .
 I need it to work with parameters and stored procedure.
Another issue is that the report is standalone -rdlc.
Can I call the report from a webservice .asmx not wcf and render it automatically in pdf format?