I have a date range parameters in my report, and when viewing it using IE and Firefox ReportViewer, the date picker is there. But when I tried running it using Chrome, the date picker was missing. I tried double click on the date field itself but nothing.
My Chrome version is 17.0.963.79 m. I tried allowing the pop-up blocker but still nothing.
SSRS Date Picker is not working in Google Chrome, it works in both IE and Firefox.
View 3 Replies View RelatedThere is a rendering issue for some columns and fonts in our report.
Here is a shot showing Report Builder and Sharepoint Rendering for the same report / page:
Excel export from the Sharepoint site renders OK:
$900,000
10/02/15
08/31/15Â
04/01/2016
Fed Phase(s): Env PE
[code]....
It seems the features are disabled when using any of the above because of compatibility issues with scripting/ActiveX not being properly supported by the FireFox and Chrome.
I believe the control determines the browser you are using is not IE and will not render the controls to prevent unexpected behavior because if the lack of ActiveX support. This can be seen when you compare the HTML of a page using IE8 and that of either IE11, FF, Chrome you'll see that the HTML for a zoom drop down control will show up in the IE8 browser and not in the others.
As for IE11 it presents itself as a Mozilla browser. eg: "User-Agent: Mozilla/5.0 (Windows NT 6.1; WOW64; Trident/7.0; rv:11.0) like Gecko" so when the control see's this it wont generate any of the controls believing the browser can't support it, even though IE11 should certainly be capable of doing so. I wanted to know if this is correct and if this is a bug?
Browser Support for ReportViewer "The ReportViewer Web server control is used to embed report functionality in an ASP.NET Web application. The type of browser used to view the application determines the kind of functionality that you can provide in a report. Use the table provided in this topic to find out which of the supported browsers are subject to report functionality restrictions."
The page mentions that the following wont be supported by other browsers The following features are not supported in third-party browsers:
Document mapSearching within the reportZoomFixed table headersThe progress indicator for report processing (a green spinning wheel) is not available for server reports, or for locally processed reports that are configured for asynchronous processing.
<rsweb:ReportViewer ID="ReportViewer1" runat="server" Visible="true" Height="100%" ShowZoomControl="True" ShowPrintButton="True"
Width="100%"Â ProcessingMode="Remote"Â ShowCredentialPrompts="False"Â ShowParameterPrompts="False"
DocumentMapCollapsed="False"Â ShowBackButton="True"Â ShowRefreshButton="False"Â InteractivityPostBackMode="AlwaysSynchronous"
ShowExportControls="False"Â BackColor="#c4dcfb"Â AsyncRendering="false"Â WaitMessageFont-Names="Verdana"Â WaitMessageFont-Size="14pt"SplitterBackColor="#C4DCFB"Â ShowDocumentMapButton="True"Â DocumentMapWidth="20%">
</rsweb:ReportViewer>
Why is it that when you want to add a user or a group to SSRS through either Management Studio or the Reports Manager, you have no people picker to lookup into Active Directory.
You can pull up AD users and computers in MMC and do a search and then put their account name in - but that seems like a huge pain.
Am I missing something here - or did Microsoft miss something really big here.
I defined my input parameter as date/time but it doesn't have a time picker where we can accept user input.
The calendar is great but time picker is missing.
Is there any add-in or tweaks I can use to get that feature ?
The alternative solution which uses drop down with some preset values are not feasible for me. All I need is just the time picker similar to adjust time in Windows.
I downloaded and installed SQL Server 2005 SP2 update on my reporting services server. I think downloaded and installed the share point reporting services admin to my share point dev server. I open up the central administration and there is no reporting services menu option under the Application menu. The sharepoint server is a farm with backend database on one server and all the web apps on the other (where the add-in was installed). The reporting server is a separate server running its own instance of SQL 2005.
Am I missing something with this setup?
I need to hide a row based on a value but show it for the rest of the values! this is the expression i am using for the first row is
=IIF(Fields!QuestionRef.Value = "1.2" or  "2.1" or "10.2" or "20.2" or "23.2" or "30.1",  true , false)
And for the second rowÂ
=IIF(Fields!QuestionRef.Value = "1.2" or  "2.1" or "10.2" or "20.2" or "23.2" or "30.1", true, false)
But it either hides the row for all values or shows it for all values.
I All
How do I do to show reporting services (.rdl) from visual basic 6 ???
Thanks
Christian
I have been using this query inside the package that I created to load data into cube. From this cube I am fetching records for my cascaded parameterized report. The issue here is one of the employee is showing under different team manager and site manager. This team manager has left the company and now the employee is back to its previous team manager. here is the code:
Truncate table CallCenterEmployee.dbo.tblCube_Staff;
GO
Insert Into CallCenterEmployee.dbo.tblCube_Staff
SELECT Â Â dbo.tblStaff.Emp_N
, CONVERT(varchar, dbo.tblStaff.Emp_N) + CONVERT(varchar, tblDate.ID) AS SurrogateKey
, dbo.tblStaff.StaffId
, dbo.tblStaff.First_M
, dbo.tblStaff.Last_M
[code]...
My laptop date format is mm/dd/yyyy.
In the report, I am using Format(field,"dd-MMM-yyyy"), but somehow the result comes out recognizing my month as day and my day as month. How do I fix this?
ie. my report date is 11/06/2015, the result shows 11-Jun-2015 instead of 06-Nov-2015.
I am trying to get 3 report parameters working to show 3 different tables.
table 1 = Area 1 data
table 2 = Regional Area 1Â
table 3 = Stores in Regional Area 1
Currently I am working on the biggest one. E.g. if all 3 parameters have information in them, then you use table 3. I have written out the coding as the following
=iif(isnothing(Parameters!Area.Value),True, False ) and
iif(isnothing(Parameters!Regional.Value),True, False ) and
iif(isnothing(Parameters!store.Value),True,False)
But it errors stating end of statement expected. Â What I have missed or not done here?Â
I have previously installed SQL Server 2005 Client tools on my machine (XP Professional). When I launch Visual Studio 2005 and go to create a new project, I can see all of the Business Intelligence Templates (i.e. Report Server Project, Integration Services Project, etc).
I recently installed Visual Studio 2008. When I go to create a new project in VS2008, none of the Business Intelligence templates appear.
How would I go about getting these BI Templates to appear so that I can create new Report Services projects in VS2008?
Thank you in advance for your assistance.
Hi
I installed RS 2005, SP1 and then the rollup fix 2153 however; if I run http://server/reportserver or view the reportserver log file, it shows version 2047 which is the SP1 version. I have added the tail end of the rollup hotfix log file which shows I have installed it.
Is this a known issue?
06/14/2006 16:03:57.153 Failed to read version information for the following file: C:Program FilesMicrosoft SQL ServerMSSQL.1Reporting ServicesReportServerCatalog.sql
06/14/2006 16:03:57.169 Failed to read version information for the following file: C:Program FilesMicrosoft SQL ServerMSSQL.1Reporting ServicesReportServerStylesHtmlViewer.css
06/14/2006 16:03:58.216 Attempting to install file: sqlrun_rs.msp
06/14/2006 16:03:58.263 Attempting to install file: \NLDN9577DWWd$89a527f93aa2bb044103hotfixrsFilessqlrun_rs.msp
06/14/2006 16:03:58.278 Creating MSP install log file at: C:WINDOWSHotfixRS9LogsRS9_Hotfix_KB918222_sqlrun_rs.msp.log
06/14/2006 16:03:58.294 Successfully opened registry key: SoftwarePoliciesMicrosoftWindowsInstaller
06/14/2006 16:03:58.294 Failed to read registry key: Debug
06/14/2006 16:04:44.826 MSP returned 0: The action completed successfully.
06/14/2006 16:04:45.092 Successfully opened registry key: SoftwarePoliciesMicrosoftWindowsInstaller
06/14/2006 16:04:45.107 Failed to read registry key: Debug
06/14/2006 16:04:45.123 Successfully installed file: \NLDN9577DWWd$89a527f93aa2bb044103hotfixrsFilessqlrun_rs.msp
06/14/2006 16:04:45.139 Restarting RS Service ReportServer since it was previously running
06/14/2006 16:04:45.154 Attempting to start service: ReportServer
06/14/2006 16:04:51.936 Successfully started service: ReportServer
06/14/2006 16:04:51.983 Successfully installed target: NLDN9577DWW
06/14/2006 16:04:51.998 Successfully installed instance: MSSQLSERVER
06/14/2006 16:04:52.014 Successfully opened registry key: SoftwareMicrosoftWindowsCurrentVersionUninstall
06/14/2006 16:04:52.608
06/14/2006 16:04:52.623 Product Status Summary:
06/14/2006 16:04:52.639 Product: SQL Server Reporting Services 2005
06/14/2006 16:04:52.701 MSSQLSERVER - Success
06/14/2006 16:04:52.717
06/14/2006 16:06:05.500 Hotfix package closed
Cheers
Steve
i created a layout in visual studio 2005 with the proper dimensions to print on an Avery 5160 label sheet (3 labels across and 10 down)
in the Body properties, i set Columns to 3, ColumnSpacing to 0.125", and Size 2.625" (W) & 1" (H).
i created a list table with a text box of the same dimension as the Size in the Body.
the thing is when i go to preview the report in visual studio, it just shows all the data but only in one column, but if i click the Print Layout button, it shows all 3 columns, then when i print it, it works! so i assumed that this was just the way visual studio handled the data. no big deal...
the problem is when i upload this to the reporting services on our local intranet and run it from the reporting services, it shows only one column (the left most only) and prints that way too; it's almost like i need a Print Layout button on the reporting services (which there isn't one).
is there something that i need to set so that it will print in 3-column form from the reporting services so people can print on label sheets?
i hope this makes sense. also, i tested this on the same printer just to make sure it wasn't hardware.
We have a SSRS report that runs on snapshots. The report contains a textbox that displays the report name using the Global!ReportName built-in field.Â
Recently, we changed the RDL name to something else but this seems to have affected the snapshots too. The older snapshots (generated before the name change) are showing the updated name.
Just wondering if there is some way to say that the snapshot will show the report name based on the time it was generated (same as the ExecutionTime built-in field). Why is there a difference?
I am new to matrixes and I have created a dataset which I would like to populate into an expanding / collapsing matrix.
The purpose of the report is to show a list of pallets and their respective stock adjustments. I have laid the matrix out as follows...
I have spent the entire afternoon playing around with this and searching Google, but as yet, I have been unable to get the matrix to display more than 1 record per pallet. Each of the pallets below have multiple adjustment records, yet the report will only display the first one...
Â
If I assign the dataset to a table, it displays as expected.
Hi,
I installed Reporting Services Add-in for Sharepoint 2007, on my Server where i have both Sharepoint 2007 and SQL Server 2005 and report Server are installed, i already installed SQL Server SP2, but in SharePoint 3.0 Central Administration under Application Management Reporting Services section is not Showing.
Please let me know if anybody has the got the same issue and fix it.
Thanks
Ahsan
Dear Expert!
A server with SQL 2005 sp2, Reporting Services and Sharepoint services (ver 3.0) (in integrated mode) gives an odd error. When viewing a Reporting Services report with a Date Time Picker, the date chosen is wrong. The preferred setting is Danish with the date format dd-mm-yyyy. The date picker shows the months in Danish but when selecting a date, and clicking on the Apply-button, the date reformats to US (mm-dd-yyyy).
Example:
When choosing 5th of September 2007 and clicking apply, it shows in the picker, 9th of May 2007.
When choosing 26th of September 2007 and clicking apply, it shows, again in US format, the RIGHT date but adds a timestamp €œ12:00 AM€? in the end, making further enquiries to fail.
The report itself receives the right date and shows correctly. The only case it fails is, when the time stamp appears.
The server is a 32-bit one with 4 GB RAM. A testserver with identical collation on the Reportserver database cannot recreate the error. The site containing the reports has been set to Danish in the regional settings. To Reinstall is not an option.
The test report has no database connection whatsoever.
When setting the site to US, the timestamp won€™t appear at all.
The server has been restarted and the installation procedure was of the simple kind. No special tweaks at all.
Any advice would be greatly appreciated.
Kind Regards
Johan Rastenberger
Presently I have a main report and subreport, with the subreport having values for a carbon copy contact, which when it is displayed it shows these values:
Â
Peter Piper    #Error    #Error   peterpiper@mycompany.com    #Error
Donald Duck   #Error    #Error   donaldduck@mycompany.com   #Error
etc.
Â
When I run the subreport directly, it correctly returns all the values:
Â
Peter Piper    123-345-6789    Calgary   peterpiper@mycompany.com    T
Donald Duck   987-654-3210    Calgary  donaldduck@mycompany.com   F
Â
Here are the details on SQL Server 2008:
Â
Microsoft SQL Server 2008 (SP2) - 10.0.4064.0 (X64)  Feb 25 2011 13:56:11  Copyright (c) 1988-2008 Microsoft Corporation  Standard Edition (64-bit) on Windows NT 6.0 <X64> (Build 6002: Service Pack 2)Â
Â
why the #Error is showing up the the main report?
I created a re port using the Report builder. The report runs fine. I want to create a parameter on the report. I created a new dataset with the query "select distinct dept from table" . Then i created a new parameter to get the values from the second dataset. After running the reports when i selected 2 departemnts, its still showing all the records.
View 3 Replies View RelatedI need to hide a column just for certain values from a table like contract decorators I tried using
=IIF(Fields!MainTrade.Value = "Contracts Decorator, Bricklayer", True, False)
But it just hid the column for all values, then i tried this but it doesn't seem to work (Think it's not correct though)
=IIF(Instr("Contracts Decorator, Bricklayer","," & Fields!MainTrade.Value & ",") > 0,true , false).
Below is the table and the highlighted column i am trying to hide just for those two fields. The table has a page break so that it would be displayed on a different page for each value, but i'm not sure it is possible as i have only done it for integers and rows before.
we have an isseu with 2 reports the are not showing in internet explorer when the client is connected by VPN Cisco Client.  The same reports work fine when they are at the office not using the VPN. We have this error in the report server log.
y!ReportServer_0-744!2e80!07/29/2015-07:16:59:: i INFO: RenderForNewSession('/Ventes - Sales/Rapport des directeurs - Directors' report (Last Period)')
webserver!ReportServer_0-744!2e80!07/29/2015-07:18:15:: i INFO: Processed report. Report='/Ventes - Sales/Rapport des directeurs - Directors' report (Last Period)', Stream=''
rshost!rshost!73c!07/29/2015-07:18:15:: e ERROR: WriteCallback(): failed to write in write callback.
rshost!rshost!73c!07/29/2015-07:18:15:: e ERROR: Failed with win32 error 0x03E3, pipeline=0x00000000036EA760.
[code]....
I am using reporting services, when I go to view my report in Report Manager (web browser is IE7), I choose a date from a date picker control, and the date that populates the date field is in US format mm/dd/yyyy, however in my regional settings, although I have English(United States) I have altered my short date format to be dd/mm/yyyy.
Currently my report will display an error saying the date is an invalid format if I pick a date that violates the mm/dd/yyyy format. I want it to display the date format that I have defined in my regional settings, without modifying the 'Language Preference' settings for IE.
The report properties has =User!Language for the 'Language' property.
Does anyone have any suggestions?
Hi,
I tried to create parameters in my report. I need one date picker. So i select data type as datetime. in default values i selected as non-queried and in date time functions i selected =Today. But am unable to set current date. Please help me to solve it.
Regards
Nataraj.C
Any way to disable the calendar datepicker show it does not even show up on the report?
View 2 Replies View RelatedHave seen other questions here about modifying date pickers supplied by reports created in BIDS. The answer is usually NO. But this does not involve a format change, simply want to limit say to a specific year.
Any ideas?
SSRS expression editor background color showing as green how to change it to Grey....
View 3 Replies View RelatedI have a scatter chart in SSRS (SQL Server 2012, Visual Studio 2010) that is producing the following:
There are five data points on there, however the result set I am using has 10 rows (a 'Completed Date' of datetime and a 'Lateness' integer whose values can be positive or negative.
This is the Dataset and the results it produces:
SELECT DISTINCT TOP 10
a.ACTIVITY_NAME As [Activity Name]
, ad.COMPLETED_DATE As [Completed Date]
, ad.DAYS_LATE As [Lateness]
FROM ACTIVITIES a
JOIN ACTIVITY_DATA ad ON ad.ACTIVITY_ID = a.ACTIVITY_ID
[code]....
How can I tell SSRS to show every data point in my chart?
hi all,
i've just updated my sql server 2005 with sp1 and sp2.
i want my report date format to change according to regional setting, therefore i've set the report property for language as User.Language.
how do i set the report parameter of type datetime to follow the format of regional setting?
my date parameter has default value which i query from a table.
for e.g. if my regional setting is UK and the default date is 9/7/2006, the date picker will display date at 7 september 2006 instead.
please help.... thanks!
I created a report with two parameters, StartDate and EndDate.
They are specified as datetime type.
When I went to the Preview tab, there were date pickers for both values.
After a week or so of using the report, I thought it would be better if I gave the parameters default values. I spent some time reading what others had done in this forum and used the following as the expressions for the parameters:
Code Snippet
=IIF(Weekday(Today()) =1, FormatDateTime(Today(),2),
IIF(Weekday(Today()) =2, FormatDateTime(Today.AddDays(-1),2),
IIF(Weekday(Today()) =3, FormatDateTime(Today.AddDays(-2),2),
IIF(Weekday(Today()) =4, FormatDateTime(Today.AddDays(-3),2),
IIF(Weekday(Today()) =5, FormatDateTime(Today.AddDays(-4),2),
IIF(Weekday(Today()) =6, FormatDateTime(Today.AddDays(-5),2), FormatDateTime(Today.AddDays(-6),2)))))))
=IIF(Weekday(Today()) =1, FormatDateTime(Today.AddDays(6),2),
IIF(Weekday(Today()) =2, FormatDateTime(Today.AddDays(5),2),
IIF(Weekday(Today()) =3, FormatDateTime(Today.AddDays(4),2),
IIF(Weekday(Today()) =4, FormatDateTime(Today.AddDays(3),2),
IIF(Weekday(Today()) =5, FormatDateTime(Today.AddDays(2),2),
IIF(Weekday(Today()) =6, FormatDateTime(Today.AddDays(1),2), FormatDateTime(Today(),2)))))))
and now, there are no date pickers. I am curious. Why are they gone? Can I get them back and still have my default values?
Thanks,
IanO
I am sure others have ran into this issue.
But I need to have date parameters using the datetime type and I need to be able to pass the correct value to the MDX.
Updated SQL 2005 to SP2 and Reporting Services Date Picker now has dates defaulting to US format (MM/DD/YYYY) instead of our previous English-Australian (DD/MM/YYYY). Both the clients and server are set to English Australian regional settings in the O/S and the reports are composed for English Australian language. Reports have correct format in Visual Studio development and re-deploying them had no effect. Everything was fine under SP1 - not sure what is going on. Any ideas???
View 4 Replies View Related