I have a problem with Date/Time parameters. When I try to preview reports locally, I get the following error message for dates past the 12th of a month:
An error occured during local report processing. The value provided for the report parameter 'Date' is not valid for its type.
My report is set to de-CH. If I enter a date into the datepicker in Swiss/German format (dd.mm.yyyy) Visual Studio changes them to mm/dd/yyyy but somehow tests them against dd.mm.yyyy and throws an error.
Windows language is German, SQL Server and Visual Studio are in English.
I installed the German language pack for Visual Studio and switched over to German to no avail. Changing the report language to en-US did not work either.
On my SSRS report, I use a date parameter to let the user select a date with the little calendar tool. When a date is selected, I have a small bit of coding run to convert the date to text, because when the report first fires up, the field is populated with "1/1/1900," and I need that turned into a blank character to let the report pull up all rows. So far, all well and good.If someone picks a date, then the report will filter the data on that selected date. Works fine.
But, it appears there is no way to get the calendar tool to go back to allowing ALL dates - so that all records are pulled - except by manually typing in, or selecting it with the tool, 1/1/1900.If I try to clear the field, causing it to use '' as a WHERE criteria (WHERE AdmitDate LIKE '%' + @AdmitDateTxt + '%'), it repopulates the field with the last selected date. So, I guess the question is, how does one tell the calendar tool for picking dates for a date parameter to reset back such that all records are pulled, not just those for a single date, without being required to type in, 1/1/1900? Or, is there some way of telling the date parameter to select all dates?
I am trying to generate a report that is basically a class list. It lists classes for a specific semester and lists them by day of the week and then by time.
If I am pulling back a dataset of all classes, how do I filter my report so as to show each set of classes appropriately (by day and by time within the day)? I tried using the Filter function on the table level, but I guess I don't get it.
Hello, My problem is with Validating Date parameter filed, when I user enters wrong (assume user is entering date instead of selecting from date picker). Where following are scenarios I would like to validate.When user enters non-date. When user enters 30/feb/yyyy.When user enters 29/feb/yyyy. (for non-leap year).When user enters 31/mm/yyyy. (for months does not includes day 31)
Could you explain in a little more detail how to accomplish this?
Is it possible to have a custom start date parameter on a report? I would like to have a cumulative daily report for the week, Friday to Thursday. The final daily to run on the Friday, then the next week begins. I have a enddate, which is today()-1 (for previous day); I need a start date to be variable. In other words,
On a Monday, report pulls data from last Friday to Sunday; On a Tuseday, report pulls data from last Friday to Monday, On a Wednesday, report pulls data from Friday to Tuesday, etc, until on Friday, the report pulls data from last Friday to Thursday.
We run std 2008 r2. I downloaded an rdl whose 2 date/partial time cols used to expand on the server to accommodate times with two digits in hr. When I preview in vs 2008, everything is ok. But when I copy back to the server, these longer date strings now wrap to next line. Why is this? Only change was to a param's drop down ds query. expression for one of the cols is
I have a report which queries events occurring during the reporting time frame the user selects.
A user selects arrivalDateStart as 8/1/2015 and arrivalDateEnd as 12/31/2015 and the results are returned.
The issue is that there is an event that began 7/31/2015 and ends 8/2/2015. This does not appear on the report. The user does not want to have to pick an earlier arrival date as the parameter of his report to pick up anything that was already in progress prior to the beginning of the month.
I am trying to figure out how to add an expression that will also return events that are in progress over the arrival date chosen for the report.
I have a multi value parameter called "Location" and this depends on another multi valued parameter value. The default value for the parameter "Location" comes from the another another multi valued parameter. Now say when the default value is set for the parameter Location like the below:
The Location parameter data set has values from the Query and default values has been set as shown below:
I am trying to create a column chart that calculates the percentage of computers in our IT environment that are Actively communicating to our SCCM Server.
I have two datasets:
1. Total_Count_Of_AD_PC DataSet.
2. PC_With_Active_SCCM_Clients dataset.
Basically i wan to calculate the percentage for each Region (i.e. AP for Asia Pacific, EMEA, Americas).
Below is the Total_Count_Of_AD_PC Dataset screenshot.
Below is the PC_With_Active_SCCM_Clients dataset.
Below is the expression that i used that is causing the error.
The Y expression for the chart ‘Chart2’ has a scope parameter that is not valid for an aggregate function. The scope parameter must be set to a string constant that is equal to either the name of a containing group, the name of a containing data region, or the name of a dataset.
I have two report , first is main report which is matrix and have one parameter User_ids which is multi value selection and my second report is basic chart of user_wise performance.
Now, my main report (matrix ) works fine for Multiple selection of users and i have putted one textbox on main report chart which has action properties set for chart report, when user click on chart button it must goes to chart with user selected in main report. Now , i have used expression for parameter to send it like ..
=join(parameter!user_id!value,",") which pass selected value to chart
And when I am selecting single user it passing that value to chart parameter list but , when it is more than one user it errors with conversion failed when converting the nvarchar value '121,128' to data type int. But my chart also works when passing 121,128 in user parameter in preview of report .
I am trying to load previous days data at 3 am via a SSIS job.
The Date variable is initiated as DATEADD("dd",-1, GETDATE()) in the for loop.
Now, as this job runs at 3 am, and I set the variable as GETDATE() - 1, it excluded the data from 12 am to 3 am in the resultset as Date is set as YYYY-MM-DD 03:00:00:000 I need this to be set as YYYY-MM-DD 00:00:00:000
I am using the calender parameter and I need to convert my data date format to the one that matched that is returned on selecting a date from this calender. Can you show me what this format is.
how can I convert my existing date format to this format. The existing date format is 2007-07-26 21:27:13.000
my dataset from sharepoint list. and this dataset value assign to parameter. i want when no any parameter is selected than it should filter like "ALL". when i select alow null value it give me prompt error you can not select null in multivalue parameter.How can i do it. i am using share point list.
I am using reporting services 2012, Can we make visibility of report parameter dynamic, ie can we make parameter visible or hide on certain condition or its visibility depends on other parameters Is this feature available in any other updated version of ssrs?
I have a report parameter called para1 which is a drop-down list and what I want to do is display another report parameter based on the para1 selection.
So for example, para1 contains a, b, c choices. if a user selects b, I would like para2 to display but if the user selects a or c, I don't want the para2 to display.
Using SQL Server 2008R2 and Report Builder 3.0..I have an action set in a text box of a table. My intent is to pass the value of that text box (which is variable) to a sub-report in a popup window. Here's my code: URL....The parameter of the report I'm trying to open is @SONum.I'm guessing my error is involved in the formatting of how the value of the parameter is being passed. I've also seen examples where the report server and report values were parameterized, but I don't know where to define
Parameters!ServerAddress.Value anywhere.Do I need to have something set up a certain way within the report I'm opening? Here's the report Parameter settings on the report I'm trying to open.
we have problems with our SQL Reporting Service 2012 (SSRS) server . We have setup Kerberos delegation between SSRS and the database server (SQL Server Always-on cluster) so users are authenticated down to the database. The issue occurs from time to time that SSRS loses the ability to delegate the user credentials to the database. At this point in time the Report Server logs contain rejected database connections because of ANONYMOUS logon. After restarting SSRS the problem is gone.
I'll go to a dataset, open up the query designer, add a new parameter, then refresh the fields, but the parameter won't be added as a report parameter. If I go to the dataset properties under the list of parameters, the value in the dropdown will be blank. However, sometimes this will automatically add.
Is this a bug in Visual Studio? How do I get around this?
We've got a requirement to build the real time report. user can browse report at any point of time and need to see the latest data(stock market) in the report.
I've few options down...
1. Directly point to OLTP database as source and write stored procedure to show result set.
2. Replicate the database and write the SP's to reports. To avoid pointing directly to OLTP db.
3. To build the datawarehouse with dim & facts to show it in reports. I prefer this as a standard method, but this would have some latency depending on trasaction load which will differ from the requirement.
I'm pretty new at this, writing SQL and reporting services. I created a report with a date parameter. I need the report to ignore the timestamp. My @Startdate is fine because the timestamps is at 12:00:00AM but my @EndDate also has this timestamp. I need to pull all the data up to the end date the user enters without taking the timestamp into consideration.
If someone can help me out with, I would greatly appreciate it.
I have a QA Deployment Date field that is being returned in a custom report I created. I also found a sample date range parameter:
What I want to accomplish:
I want to select a From and To Date and filter the report to only display the rows that have the QA Deployment Date within the selected range.
For example.. I want to select From Date (8/1/2105) and To Date (8/31/2015) and I only want to return only the results that have a QA Deployment date between that selected range.
I would like to be able to search by a single date, @StartDate, or by a date range , between @StartDate and @EndDate. I am having a hard time with the logic on this for a report in SSRS.
I'm facing to set report parameter report parameter need to be date time so that calendar will be displayed but data set field is integer data type?Now report shows error message.
