Reporting Services :: Date Range Parameters Are Off By One Day?

Apr 21, 2015

I have a Start Date and End Date parameter in my SSRS report.  The results are off by 1 day.  For example if I enter 4/2/2015 and 4/20/2015 it will return a few results from 4/1/2015 to 4/19/2015.

View 4 Replies


ADVERTISEMENT

Reporting Services :: Date Range Filter Based On Date Values Returned In Report?

Aug 27, 2015

I have a QA Deployment Date field that is being returned in a custom report I created. I also found a sample date range parameter:

What I want to accomplish:

I want to select a From and To Date and filter the report to only display the rows that have the QA Deployment Date within the selected range.

For example.. I want to select From Date (8/1/2105) and To Date (8/31/2015) and I only want to return only the results that have a QA Deployment date between that selected range.

View 3 Replies View Related

Reporting Services :: Searching By Single Date Or Date Range

Apr 22, 2015

I would like to be able to search by a single date, @StartDate, or by a date range , between @StartDate and @EndDate. I am having a hard time with the logic on this for a report in SSRS.

View 5 Replies View Related

Reporting Services :: Chart - Group Values Depending On Date Range?

May 20, 2015

Currently I report our monthly fees broken down into 4 weeks per month by using 4 separate datasets with the following code

SELECT
SUM(Practice.ibvSalesByJob.JobBilledExVAT) AS Sum_JobBilledExVAT
FROM
Practice.ibvSalesByJob
INNER JOIN Practice.idvJobType

[Code] ....

The second dataset then has the date code changed to 

AND Practice.ibvSalesByJob.[Date] >= Cast(@Month AS char(2)) + '/08/' + Cast(@DateYear AS char(4)) + ' 00:00:01'
AND Practice.ibvSalesByJob.[Date] <= Cast(@Month AS char(2)) + '/16/' + Cast(@DateYear AS char(4)) + ' 00:00:00'

The third

AND Practice.ibvSalesByJob.[Date] >= Cast(@Month AS char(2)) + '/16/' + Cast(@DateYear AS char(4)) + ' 00:00:01'
AND Practice.ibvSalesByJob.[Date] <= Cast(@Month AS char(2)) + '/23/' + Cast(@DateYear AS char(4)) + ' 00:00:00'

The fourth

AND Practice.ibvSalesByJob.[Date] >= Cast(@Month AS char(2)) + '/23/' + Cast(@DateYear AS char(4)) + ' 00:00:01'

Now I was hoping so that I could report the above data in one chart and do an expression on the category and group the dates so I would just have one dataset like below but four separate columns saying Week 1, 2 3 and 4 and then the sum filtered in line.

SELECT
SUM(Practice.ibvSalesByJob.JobBilledExVAT) AS Sum_JobBilledExVAT
FROM
Practice.ibvSalesByJob
INNER JOIN Practice.idvJobType

[Code] ....

If I could somehow with SQL tie in all 4 separate datasets and display them as Week 1, 2, 3 and 4 underneath the dataset and selectable.An even simpler solution maybe just understanding how charts work, I can get it so I display the 4 separate weeks in the chart however I can't get the bottom line (Category Group) to display Week 1, 2, 3 and 4.

View 8 Replies View Related

Reporting Services :: In SSRS Report Need To Limit Date Range To One Month

Jul 22, 2015

In SSRS report I have 2 parameters start date and end date, so when somebody is selecting end date more than a month(if today date is 22 then they are selecting aug 23) then it should give error message to user like "Date out of range".

View 2 Replies View Related

MS Reporting Services Date Parameters

Mar 26, 2008

Hi,

Not sure if I will be able to get the answer I need on this forum but hopefully I will!

We have a previous report that uses the code:

AND T1."Decision_Date" BETWEEN '2005-07-01 00:00:00.000' AND '2006-06-30 00:00:00.000' AND T1."Decision_Type_Description"

With this the report was run with the "static" dates, the new report (in MS reporting services) requires that the user be able to enter in the start date range and the end date range.

I have come up with something like:
(T1."Decision_Date" = @Start_Year) AND (T1."Decision_Date" = @End_Year)

But not working. Can anyone assist?

Thanks,

jonathanr

View 1 Replies View Related

Reporting Services :: Scheduling MS Report With Date Parameters

Jun 2, 2015

I need to schedule a report with date ranges which change from month to month.  Is there a scheduler date function I can place in the parameter field(s) for that report?

View 4 Replies View Related

Reporting Services :: Setting SSRS Parameters In Subscription For Date Ranges

Jun 4, 2015

I have an SSRS report with parameters for Created On Start and Created On End. Users run this manually and choose the date range to display records for.

I would like to set up two different subscriptions

1) to send weekly on Monday morning for "last weeks" records and
2) to send monthly to send "last month's" records.

View 2 Replies View Related

Reporting Services :: Page Break Based On Start And End Date Parameters In SSRS?

Jul 7, 2015

I have a detailed report in ssrs in which data can come from start date and end date parameters.but the problem is. for example i gave startdate as 01/01/2015 and end date as 09/31/2015 then the data must be in displayed in such a way that jan month in one tab and feb month data in one tab and so on to sep month data in new tab when i export to Excel.

View 3 Replies View Related

Reporting Services :: Start And End Date Parameters Report In SSRS 2008 Is Not Running On Runtime?

Aug 27, 2015

I made one report in SSRS 2008 in which getting data from one SharePoint List.

three parameters in report :

Country
StartDate
EndDate

I am using query which I created with CAML.

query is running well and data is coming correctly if I run this on Query designer.and date format must be YYYY-MM-DD.but when I try to run through on run time then the date control is showing format dd/mm/yyyy.

I change the regional settings of windows and SharePoint site to English(United States). and when I select date control it is also putting date in format like "YYYY-MM-DD'. and in that format report is working well in Query designer view.But on run time still it is not working.

View 3 Replies View Related

Prompting For Date Range Parameters With Report Builder?

Nov 22, 2005

Hello,

View 6 Replies View Related

Reporting On Summarised Date Range Data

Mar 23, 2004

Hi all

Suppliers send my client sales figures in different formats. Some send data for each sale, some summarise by week, month or quarter.

I need to report on this data, showing estimates as to how many sales per day, week, month or quarter. To give you an example of the data I receive, see a simplified script below.

CREATE TABLE dbo.sales_summary (
summary_id int IDENTITY (1, 1) NOT FOR REPLICATION NOT NULL ,
start_date datetime NOT NULL ,
end_date datetime NOT NULL ,
number_of_sales int not null
)
GO

insert into sales_summary VALUES ( '20030101', '20030131', 100)
insert into sales_summary VALUES ( '20030101', '20030120', 150)
insert into sales_summary VALUES ( '20030111', '20030131', 200)
insert into sales_summary VALUES ( '20030201', '20030228', 120)
insert into sales_summary VALUES ( '20030201', '20030207', 50)
go

As you can see, I essentially receive a date range and a number of sales in each row. The data in the real system is received from more than 100 suppliers and the sales_summary table has more than a million rows in it.

Can anyone suggest an efficient way of being able to create a report that lists sales
- for each day
- for each week
- for each month
etc.

An example of the daily report might look something like

Date Number of Sales
01-Jan-03 20
02-Jan-03 0
03-Jan -03 15
etc.

An example of the weekly report might look something like

Week Starting Number of Sales
01-Jan-03 100
08-Jan-03 135
15-Jan-03 54
etc.

This has been driving me nuts for a while so any help is appreceiated.
Matt

View 2 Replies View Related

SQL Server 2008 :: Query To Select Date Range From Two Tables With Same Date Range

Apr 6, 2015

I have 2 tables, one is table A which stores Resources Assign to work for a certain period. The structure is as below

Name StartDate EndDate
Tan 2015-04-01 08:30:00.000 2015-04-01 16:30:00.000
Max 2015-04-01 08:30:00.000 2015-04-01 16:30:00.000
Alan 2015-04-01 16:30:00.000 2015-04-02 00:30:00.000

The table B stores the item process time. The structure is as below

Item ProcessStartDate ProcessEndDate
V 2015-04-01 09:30:10.000 2015-04-01 09:34:45.000
Q 2015-04-01 10:39:01.000 2015-04-01 10:41:11.000
W 2015-04-01 11:44:00.000 2015-04-01 11:46:25.000
A 2015-04-01 16:40:10.000 2015-04-01 16:42:45.000
B 2015-04-01 16:43:01.000 2015-04-01 16:45:11.000
C 2015-04-01 16:47:00.000 2015-04-01 16:49:25.000

I need to select the item which process in 2015-04-01 16:40:00 and 2015-04-01 17:30:00. Beside that I need to know how many resource is assigned to process the item in that period of time. I only has the start date is 2015-04-01 16:40:00 and end date is 2015-04-01 17:30:00. How I can select the data from both tables. There is no need for JOIN, just seperate selections.

Another item process time is in 2015-04-01 10:00:00 and 2015-04-04 11:50:59.

The result expected is

Table A

Name StartDate EndDate
Alan 2015-04-01 16:30:00.000 2015-04-02 00:30:00.000

Table B

Item ProcessStartDate ProcessEndDate
A 2015-04-01 16:30:10.000 2015-04-01 16:32:45.000
B 2015-04-01 16:33:01.000 2015-04-01 16:35:11.000
C 2015-04-01 16:37:00.000 2015-04-02 16:39:25.000

Scenario 2 expected result

Table A

Name StartDate EndDate
Tan 2015-04-01 08:30:00.000 2015-04-01 16:30:00.000
Max 2015-04-01 08:30:00.000 2015-04-01 16:30:00.000

Table B

Item ProcessStartDate ProcessEndDate
Q 2015-04-01 10:39:01.000 2015-04-01 10:41:11.000
W 2015-04-01 11:44:00.000 2015-04-01 11:46:25.000

View 8 Replies View Related

Value Does Not Fall Within The Expected Range Sql Reporting Services

Jan 18, 2008

I just installed Reporting Services - and installed the sample reports and when I try view any of the individual reports all of them give this message "Value does not fall within the expected range sql reporting services"

I also tried to create my own report, which compiles and I when I try to view it as well in the browser I get the same message.

Thanks for any help.

View 15 Replies View Related

Reporting Services :: Multiple Data Per Row On Range Bar Chart

Jul 23, 2015

I'm using Reporting Services 2008 R2, version 10.50.2550.0, and Visual Studio 2008, version 9.0.30729.4462 QFE.  Not sure if the SQL version matters, since I haven't gotten the report out of the development environment.I've read lots of messages, including URL.... that show you can have multiple data entries per row in a Range Bar Chart, simply by turning DrawSideBySide to False.My data set basically contains four pieces of data, LineNumber, Equipment, StartTime and EndTime.  I have data like:

1, 'CLM1', 08:00, 08:30
1, 'CLM1', 09:00, 09:15
2, 'SS1', 08:05, 08:35
2, 'SS1', 09:05, 09:35

(I actually have a date with my datetime entries, but that should give you the idea.)  My chart is set up with Values of EndTime and StartTime.  If I set my chart up with only Equipment in the Category Groups entry, my chart will show CLM1 from 08:00-08:30, and SS1 from 08:05 to 08:35.  No sign of the other entries per equipment, although I added a tablix to retrieve the same data and it all shows up.Changing DrawSideBySide between True, False and Auto has no effect on the data displayed on my chart.  If I add StartTime in the Category Groups, I do show all the data, but one row for each piece of data, which isn't what the customer wants.From what I can tell from various sites, I'm set up right, but it just isn't working.

View 2 Replies View Related

Analysis Services 2000 + Reporting Services 2005 + Parameters

Sep 16, 2007



Hi All,

I'm trying to create reports in RS2005 using AS2000 as my data source. I understand that if I use RS2005 on AS2000, I wont be able to enjoy the OLAP based parameters as in using AS2005. Does anyone know an easy way to easily use Parameters in RS2005 while still using AS2000?

Regards,
Joseph

View 1 Replies View Related

Parameters In Reporting Services And Data Source Is Analytical Services

Dec 10, 2007



My requirement for the parameter is multivalue parameter with a text box. for example when user enters aa15 it need to include product aa15. when the user enters aa15, aa16, zz15 than it needs to include all the three products. the last case is when the user enters AA** than i need to inclued all the products start with AA. when i use default multivalue parameter with data source analytical services than i am getting a drop down box. I dont want that. I need a text box where user can enter the value.
1. In sql we have a like key word to query . for example select * from product where product like "AA%".
what is equavalent mdx query to get such results ?
2.How to impliment the multivalue parameters without using dropdown box?

View 1 Replies View Related

Reporting Services :: SSRS - Display Static Time Range On Y-axis?

Oct 6, 2015

displaying time interval on y -axis for an ssrs report.

the values are static... it should start from 00:00 - 23:59 with 00:30 interval....

interval of 30 mins...

I tried several functions that are available but didnt work.

View 6 Replies View Related

Reporting Services :: Increase Range Bar Chart Size Dynamically Inside A Table In SSRS

Oct 21, 2015

 I have a range bar chart Inside a table of row group and the chart is repeatedly generate according to category ,i want to increase chart height dynamically based on category.

suppose for if category =A THEN CHART HEIGHT=10CM
category =B THEN CHART HEIGHT=7CM

View 5 Replies View Related

Reporting Services :: Range Bar Chart - X Axis Dates Label Format Need To Be Converted To Quarter

Sep 4, 2014

I have created range bar chart and I am not able to achieve the following tasks.

1. Change X-axis Label Format to Quarter:

I have x-axis with dates and y axis of project groups. I have changed x-axis interval type = month and interval=3.
   
Set the Maximum =  Max(ProjectEndDate) and Minimum = Min(ProjectStartDate).

Now my chart showing 3 months x-axis interval dates in mm/dd/yyyy format. I want to change this interval date format to Quarter. The problem is LabelsFormat property is not recognize  the "=Q or q or quarter" and also not accepting the expressions. How can I achieve this?

2. Placing series side by side when it is not overlapping

I want to place the same group series side by side only when the previous project end date is less than next project start date, otherwise place the next project to next row. How can I achieve this?

View 2 Replies View Related

About Reporting Services Parameters On 2nd

Mar 2, 2008



Any body plese tell me How to set the Parameters at the time or report design and how to use that parameter to call report from web application.Suppose i want to display report depend on Prodid(field in table).
And Suppose i want to display report between dates.

Regards.

View 5 Replies View Related

About Parameters In Reporting Services

Mar 4, 2008

I have ony query in my dataset at design time with parameters.
I am getting the correct data when i pass parameters.
Supose,i dont pass any parameters,I need Total data.
Now how can i write other query in my Data set.
Regards

View 4 Replies View Related

SQL Reporting Services Parameters

Dec 13, 2007

Hi Friends,

We are implementing one SQL Server 2005 Reporting services for my client. I want to know, is there any possibilty to keep track the parameters at SQL Reporting sever side, which i am sending it from my UI.

Please help me in this regard.

Thanks,
Rao.

View 3 Replies View Related

Reporting Services :: Formatting A Date Field To Just Show Date Not Minutes?

Jul 6, 2015

A date field in a report returns the date value as:

2015-07-01 13:30:27.000

Is there any way I can script this to appear as:

01 July 2015 (or 01-07-2015 or 01/07/2015)  - basically to cut out the hours, minutes and seconds?

The best I have managed is: CONVERT (varchar(17),DATE,113) AS Date1 but this still leaves me with:

01 July 2015 13:30

View 9 Replies View Related

Reporting Services :: Expression To Return Date Value Based On Most Recent Date Only

Oct 7, 2015

How do you Write an expression to Return the date value based on the most recent date only?

Eg.  Date 10-7-2015,  action - done, notes - all items fixed.
       Date 4-5-2016, action - not yet done, notes - buying parts

All these dates are returned based on a search parameter based on a project number.  I only want the most current date and associated fields displayed.

View 4 Replies View Related

SQL 2000 Reporting Services - Parameters

Mar 23, 2004

I am trying to figure how to programmatically pass parameters to the report in SQL Reporting Services using web service API and then send this report to the printer. I found code in C# on how to print and it does work very well. I am hoping to add report parameters to this module. Any ideas, samples or help would really be appreciated.


here is the code for printing

using System;
using System.Drawing;
using System.Drawing.Imaging;
using System.Drawing.Printing;
using System.IO;
using System.Web.Services.Protocols;
using PrintReport.reportserver;
using System.Runtime.InteropServices; // For Marshal.Copy

namespace PrintReport
{
/// <summary>
/// A simple console application that demonstrates one way to
/// print Reporting Services reports to a printer.
/// </summary>
class app
{
/// <summary>
/// The main entry point for the application.
/// </summary>
[STAThread]
static void Main(string[] args)
{
PrintExample pe = new PrintExample();
// The name of the printer should be added here;
// this could be a local or network printer.
pe.PrintReport(@"\jacc-fs120S2500 PCL IT");
}
}

class PrintExample
{
ReportingService rs;
private byte[][] m_renderedReport;
private Graphics.EnumerateMetafileProc m_delegate = null;
private MemoryStream m_currentPageStream;
private Metafile m_metafile = null;
int m_numberOfPages;
private int m_currentPrintingPage;
private int m_lastPrintingPage;

public PrintExample()
{
// Create proxy object and authenticate
Console.WriteLine("Authenticating to the Web service...");
rs = new ReportingService();
rs.Credentials = System.Net.CredentialCache.DefaultCredentials;
}

public byte[][] RenderReport(string reportPath)
{
// Private variables for rendering
string deviceInfo = null;
string format = "IMAGE";
Byte[] firstPage = null;
string encoding;
string mimeType;
Warning[] warnings = null;
ParameterValue[] reportHistoryParameters = null;
string[] streamIDs = null;
Byte[][] pages = null;

// Build device info based on the start page
deviceInfo =
String.Format(@"<DeviceInfo><OutputFormat>{0}</OutputFormat></DeviceInfo>", "emf");

//Exectute the report and get page count.
try
{
// Renders the first page of the report and returns streamIDs for
// subsequent pages
firstPage = rs.Render(
reportPath,
format,
null,
deviceInfo,
null,
null,
null,
out encoding,
out mimeType,
out reportHistoryParameters,
out warnings,
out streamIDs);

// The total number of pages of the report is 1 + the streamIDs
m_numberOfPages = streamIDs.Length + 1;
pages = new Byte[m_numberOfPages][];

// The first page was already rendered
pages[0] = firstPage;

for (int pageIndex = 1; pageIndex < m_numberOfPages; pageIndex++)
{
// Build device info based on start page
deviceInfo =
String.Format(@"<DeviceInfo><OutputFormat>{0}</OutputFormat><StartPage>{1}</StartPage></DeviceInfo>",
"emf", pageIndex+1);
pages[pageIndex] = rs.Render(
reportPath,
format,
null,
deviceInfo,
null,
null,
null,
out encoding,
out mimeType,
out reportHistoryParameters,
out warnings,
out streamIDs);
}
}

catch (SoapException ex)
{
Console.WriteLine(ex.Detail.InnerXml);
}

catch (Exception ex)
{
Console.WriteLine(ex.Message);
}

finally
{
Console.WriteLine("Number of pages: {0}", pages.Length);
}

return pages;
}


public bool PrintReport(string printerName)
{
this.RenderedReport = this.RenderReport("/SampleReports/Company Sales");
try
{
// Wait for the report to completely render.
if(m_numberOfPages < 1)
return false;
PrinterSettings printerSettings = new PrinterSettings();
printerSettings.MaximumPage = m_numberOfPages;
printerSettings.MinimumPage = 1;
printerSettings.PrintRange = PrintRange.SomePages;
printerSettings.FromPage = 1;
printerSettings.ToPage = m_numberOfPages;
printerSettings.PrinterName = printerName;
PrintDocument pd = new PrintDocument();
m_currentPrintingPage = 1;
m_lastPrintingPage = m_numberOfPages;
pd.PrinterSettings = printerSettings;

// Print report
Console.WriteLine("Printing report...");
pd.PrintPage += new PrintPageEventHandler(this.pd_PrintPage);
pd.Print();
}

catch(Exception ex)
{
Console.WriteLine(ex.Message);
}
finally
{
// Clean up goes here.
}

return true;
}

private void pd_PrintPage(object sender, PrintPageEventArgs ev)
{
ev.HasMorePages = false;
if (m_currentPrintingPage <= m_lastPrintingPage && MoveToPage(m_currentPrintingPage))
{
// Draw the page
ReportDrawPage(ev.Graphics);
// If the next page is less than or equal to the last page,
// print another page.
if (++m_currentPrintingPage <= m_lastPrintingPage)
ev.HasMorePages = true;
}
}

// Method to draw the current emf memory stream
private void ReportDrawPage(Graphics g)
{
if(null == m_currentPageStream || 0 == m_currentPageStream.Length || null ==m_metafile)
return;
lock(this)
{
// Set the metafile delegate.
int width = m_metafile.Width;
int height= m_metafile.Height;
m_delegate = new Graphics.EnumerateMetafileProc(MetafileCallback);
// Draw in the rectangle
Point destPoint = new Point(0, 0);
g.EnumerateMetafile(m_metafile,destPoint , m_delegate);
// Clean up
m_delegate = null;
}
}

private bool MoveToPage(Int32 page)
{
// Check to make sure that the current page exists in
// the array list
if(null == this.RenderedReport[m_currentPrintingPage-1])
return false;
// Set current page stream equal to the rendered page
m_currentPageStream = new MemoryStream(this.RenderedReport[m_currentPrintingPage-1]);
// Set its postion to start.
m_currentPageStream.Position = 0;
// Initialize the metafile
if(null != m_metafile)
{
m_metafile.Dispose();
m_metafile = null;
}
// Load the metafile image for this page
m_metafile = new Metafile((Stream)m_currentPageStream);
return true;
}

private bool MetafileCallback(
EmfPlusRecordType recordType,
int flags,
int dataSize,
IntPtr data,
PlayRecordCallback callbackData)
{
byte[] dataArray = null;
// Dance around unmanaged code.
if (data != IntPtr.Zero)
{
// Copy the unmanaged record to a managed byte buffer
// that can be used by PlayRecord.
dataArray = new byte[dataSize];
Marshal.Copy(data, dataArray, 0, dataSize);
}
// play the record.
m_metafile.PlayRecord(recordType, flags, dataSize, dataArray);

return true;
}

public byte[][] RenderedReport
{
get
{
return m_renderedReport;
}
set
{
m_renderedReport = value;
}
}
}
}


Thanks
Tom

View 7 Replies View Related

Report Parameters In Reporting Services

Nov 21, 2004

Hi guys & gals

I'm just setting up Reporting Services for our company and it's a great product, no doubt about it. However, I've come across a problem I can't solve and I wonder if any of you can help.

I've produced a sales report and I want my users to be able to enter a list of sales periods to include on the report. For example, the user might want to view the report for periods 10,11,13,14 and 17 and exclude periods 12,15 and 16. Obviously, the underlying query will probably involve an IN() clause but I'm struggling to think of a way that the user might be able to enter these parameters.

The most obvious way might be by typing in a comma separated string, but I don't know how to then put those values into the query.

Anyone got any ideas?

View 1 Replies View Related

SQL Reporting Services Passing Parameters

Aug 25, 2005

I am creating a drill through that will go out and find the correctreport out of 27 that equal my 2 parameters NAME_ID and DETAIL_ID.Does anyone out there have any ideas for me? I can make it conect to 1report. I do not know how to make it search for the correct report

View 1 Replies View Related

Passing Parameters In Reporting Services

Mar 10, 2007

Hi all.
I can pass parameters from my front end(C#.net) to my reports(in Business Intelligence Project).
I want the reverse of it. I want to pass parameter from my report to my windows application project.

Any help would be appreciated.
thanks
-Ron-

View 5 Replies View Related

Its Not Report Parameters (ITS REPORTING SERVICES I THINK)

Jan 5, 2007

i am trying to generate a report based on 3 parameters
age, location, ethnciity

every thing works fine in data and layout tab,
when i run the preview tab, it give me the option to input paramaters and then when i hit veiw report, it shows processing report.... (indefinite) time.

i tried executing the query in data tab, it takes less than a sec.

any ideas??

am i doing somethign wrong in parameters??

View 7 Replies View Related

Reporting Services - Variables/Parameters - Is This A Bug?

Jun 3, 2006

When creating a Reporting Services report and declaring local variables as part of your query in a dataset there is sometimes a problem. When you hit run in the Data section and the €œDefine Query Parameters€? box pops up, all the variables are not there. Sometimes when you go to properties (€¦) of that dataset the parameters are gone. Is this a bug? This is happening both in RS2000 and 2005.
Thanks

View 7 Replies View Related

Parameters From Cube To Reporting Services

Mar 10, 2008



I'm trying to create report with datasource as a cube. I'm able to connect to datasource to pull data with a single parameter. But, I'm unable to succeed in the following scenario:
I have a dimension "Period" as Paremeter.
The Period dimension has a hierarchy as year- quarter- month.
So, I would like to create a drilldown parameter for period as year - quarter - month.

Please let me know, how to acheive this.

thanks,
Naveen.

View 1 Replies View Related

Passing Parameters From ASP.NET To Reporting Services

Aug 30, 2007

I have an asp.net app that is calling a reporting service url. on that url I pass two parameters as query strings. In the Report I defined the query string parameters in the Report Parameters. I then want these two parameters to be passed to the stored procedure in the report. How can I make this happen? The parameters seem to get to the Report but I can't seem to get them mapped to the stored proc. In the data set I defined the stored procs parameters and mapped them to the corresponding Report Parameters but still no go.

I'm assuming there's something fundamental I'm missing here about passing parameters to reporting services.

Thanks

View 1 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved