How to display the logo in middle of report header , The logo is embedded in the Image folder . The column of the report are static. we are using SSRS 2008
View 6 RepliesI have a table that has an image datatype column and I also have acontant type column in that same table to define which type of data isstored in that table.In this case a screen shot or may be a word document may be stored inthat table....!I am trying to use that image datatype field in my report and when theyclick some button I needed the reporting service report to open awindow based on the content type and display that image.Has anyone done this? Any help will be much appreciated...Thanks in advance....
View 1 Replies View RelatedI need to export the SSRS report into PDF using Image click in addition to out of the box available Export option.
View 3 Replies View RelatedHello All,
I am unable to display report header when I deploy the reports on report server (Internet). However, they look perfect when previewed in the BI studio. Any clue where could be the problem?
Thanks in Advance!
Rashi
How to show the CurrentMonthanddateandyear in my report header in ssrs?
1.How to show the currentdateandMonthyear exmple date format like June 29 2015 on my report header.
2.How to change the report rdl name with the same name like EmpUpdatedreportJune 29 2015.rdl ,it is possible to create and change the rdl file name with the current dateandmonth.
We are planning to develop weekly report in SSRS.For this we wants each day as column & some expenses[Numeric figure in row]we have dataset like
day
exp1
exp2
exp3
17/05/2015
120
150
650
[code]....
There are some other filters are there that i have applied in my report tablix property.
I have a requirement to display a disclaimer message before going to the content of a particular report. The workflow would be:
go to report folder e.g. Reports/Pages/Folder.aspx?ItemPath=%2fMyFolder%2fReports&ViewMode=ListClick on Report xDisplay DisclaimerPress 'ok' on disclaimerContinue to report
This is SSRS 2012 native.
I had contemplated injecting JavaScript into the report, but this appears virtually impossible to do i a simple manner.
sample records
1--red
2--green
3--green
4--red
5--red
6--red
7--green
How to achieve This
I am displaying the red line in the beginning of the current week column in the matrix table. But for few resources the red line is missing. For Example in below screenshot, refer the 'Adrian Larkin' resource. Here is the SSRS report border expression which is comparing the [TimeByDay] with the current Week First Monday Date to display the red bar -
=IIf(Fields!TimeByDay.Value = DATEADD("d", -(WeekDay(Today(),2))+1, Today()), "Red", "Black")"
Here is the dataset result set. If you refer the column [TimeByDay], it has no record for the date 11/05/2015 for the Adrian resource as he has no assignment for the date 11-05-2015.display the red missing line red bar using the expression or any other solution.
How to display an database image in the Report page header of sql server reporting service?
View 3 Replies View RelatedI created a virtual directory in IIS that points to a folder on c: where my images reside. I use a URL to reference one of those images in my report heading. It appears as it should in designer's preview tab but only as a big red X in Report Viewer from my browser.
Directory security on the virtual directory is set to Integrated Windows.
Right clicking on red x in IE7>properties shows a path to report server instead of the special virtual directory I created.
RDL snippet shows:
<PageHeader>
<PrintOnFirstPage>true</PrintOnFirstPage>
<ReportItems>
<Image Name="image1">
<Sizing>AutoSize</Sizing>
<Top>0.125in</Top>
<Width>2.07292in</Width>
<MIMEType />
<Source>External</Source>
<Style />
<ZIndex>3</ZIndex>
<Left>0.25in</Left>
<Height>0.32292in</Height>
<Value>http://localhost/vddirectoryname/filename.BMP</Value>
</Image>
Any thoughts on what I'm doing wrong?
I am making a book-like report, I am using a report that has a header and calling a sub-report that has it's own header. However the sub-report header is not showing on the parent report. Parent report header is prevailing over the sub-report. Is it possible to have both headers displaying?
View 3 Replies View RelatedI am creating a simple SSRS table report through Report Builder. My dataset is looking for the stored procedure . When I execute the Stored procedure through SSMS I get resutset for certain parameters. I execute the dataset (Store procedure) through query designer in dataset properties and I get results back. But when I try to run the report and see the preview, I do not get any results displayed. I been looking on the same issue form last 3-4 days and have not found any clue.
Following is the stored procedure I am using. Also I am passing multivalued parameter through report as well, and I am using spilt function to seperate the libraryid I am reading from parameter values. This works fine. I have similar kind of four other reports and with different stored procedure which exactly follow the same method , like multivalue parameters and other criteria are also very similar. All other reports works just fine.. This perticular report has issue for displying results, following is the stored procedure I am using
SET ANSI_NULLS ON
GO
SET QUOTED_IDENTIFIER ON
GO
[code]....
I have done the following and a domain user would not access report created a login to the SQL server to the user (this SQL Server is where data source DB is)went to site setting in Report Manager and made this use a system userright clicked on report folder and made this user in the browser roleeven checked that in the report in question, the user is already in the browser role Still the user would not access the report! "User .......... does not have required permission" is the error message I am getting.
View 6 Replies View RelatedI have written a report visual studio. The report has 10 multi-value parameters that pull data from their individual data sets within the reports. When running the report from within Visual Studio it renders fine. There are no errors reported, only a warning related to a pathname I have use to retrieve image data and display on the report.Deployment of the report is error free.When I view the report I briefly get the "Loading" splash window, but then nothing. None of the headers or static text is displayed. The results window is blank.
The report defaults all the parameter values. In trying to debug the issue I have found by reducing the number of parameter values the report will render. Once I have all the values added, the report does nothing.Below is the query being used for the report. The where clause in the query shows the parameters being used and the syntax.We are running on Windows Server 2008 R2 and SQL Server 2008 R2.
Ralph
SELECT RTRIM(a.ITEMNMBR) AS Style, RTRIM(a.ITEMDESC) AS Description, a.ITMSHNAM AS UPC, c.LOCNCODE AS Store, d.LISTPRCE AS ListPrice, a.CURRCOST AS Cost,
a.USCATVLS_1 AS [Main Category], a.USCATVLS_2 AS Market, a.USCATVLS_3 AS [Alternate Retail], a.USCATVLS_4 AS Country, b.ITEMXTRAS_1_Type AS Type,
b.ITEMXTRAS_2_Finish AS Finish, b.ITEMXTRAS_3_SubCategory AS SubCategory, b.ITEMXTRAS_4_Department AS Department,
[code]...
I have a ssrs report having 2 tables in with 4 columns in each. When I go to export option in preview I can see all data coming in one excel sheet, But I am trying to get 2 tables in 2 different pages in Excel when I export.First page of excel comes with first table data with 4 columns and second page of excel comes with second table data with 4 columns .
View 2 Replies View RelatedI'm wondering how to print a SSRS report without bringing up a report viewer. Is there way to print(PDF format) the SSRS report in the web application( .net ) directly from the "print" button without bringing up a report viewer?
View 2 Replies View RelatedI am trying to develop a report from cube,and it has one drill through report.when i click on sales amount field on main report,then it open the drill through report with details.Here i passed the **(category,subcat,product)parameters(Cascaded)** to drill through report in action part of main report.In my main report i have two columns .
columns are **Level** and **Salesamount**.
Values are like
**[-]category** **100**
**[-]subcat** **50**
**product** **30**
when i click on 100, parameters are passed & it open the detail report correctly, but when i click on 50,the values for subcat parameter is not getting values in detail report and same as the product also.
Here i used the expressions in parameter values
**pCategory**----iif(inscope(category),!fields.category.value,split(join(Parameters!category.value,","),","))
**psubcat**----iif(inscope(subcat),!fields.subcat.value,split(join(Parameters!subcat.value,","),","))
**pproduct**----iif(inscope(product),!fields.product.value,split(join(Parameters!product.value,","),","))
How do I get data on my linked report based on my grouped subtotal and grand total from the main report. The subtotal and grand total are calculated columns.
I have a 3 columns in my matrix in the SSRS summary report. Actn_COAST, ActnCITY and NumbOfAccts.
The following is code for my summary report. The results are shown below.
SELECT Distinct ActnCITY, Count(ACCT) as NumbOfAccts,
CASE WHEN ActnCITY in ('NY', 'OH', IN, 'NJ', 'SC', 'NC') THEN 'EAST COAST'
WHEN ActnCITY IN ('CA'. 'NV', 'UT', 'WA', 'OR') THEN 'WEST COAST'
ELSE 'OTHER'
END AS Actn_COAST
FROM tbl1
where ACTNDATE between @STARTDT and @EndDT
Code for my detail report contains the following SQL
SELECT * FROM tbl1 where ACTNDATE between @STARTDT and @EndDT AND @ActnCITY = ActnCITY
I have linked my report based on the NumbOfAccts column. I am able to get data if I click any of the NumbOfAccts values related to the state I want. However when I am not sure how to make the subtotal and grand total work. I want when I click on the subtotal of either coast, I should be able to see records of that coast e.g., if I select 37 I should be able to see all the records in East Coast. If I click on the Grand Total, I only want data related to those 2 coasts.
Is there a way to subscribe SSRS report using dynamic parameters for email and trigger the report from autosys job so that report should generate the exact time the job is triggered.Let me describe, my SSRS report should be triggered on success of one autosys job. i need to send email parameter and time of report schedule from this autosys job.
View 3 Replies View RelatedHi,
I'm having problems navigating from one report to another one if the second report has a multi-valued report parameter. When I navigate to the second report, I don't pass any parameters, but I get an error "parameter is missing a value" for the multi-valued report parameter. I have it setup as allow "multi-value" and "blank value". Any idea what the issue might be?
Thanks.
I have a report which works fine with visual studio but when i uploaded the same into report server and tries to access it through IE or chrome or anything its dam slow.
how to get rid of this issue?
I need to create a SSRS report using the Warehouse tfs_warehouse DB Report need to be drill down on WorkItemType Parents and child values. So, If we click on Product Back Log Item will get all the tasks inside it and so on....
------->Product BackLog items
----------> Bugs Or Tasks
-----------> Tasks
I have done research and found out how to do it in OLAP cube ..but still can't figure out the TSQL query to be used.Found one of the query on forum:
SELECT * FROM DimWorkItem DWI
INNER JOIN FactWorkItemLinkHistory FWILH ON DWI.System_Id = FWILH.TargetWorkItemID
WHERE FWILH.WorkItemLinkTypeSK IN (SELECT DWILT.WorkItemLinkTypeSK FROM DimWorkItemLinkType DWILT WHERE DWILT.LinkName = N'Child')
AND DWI.System_WorkItemType = N'Task'
AND DWI.System_Rev = (SELECT MAX(DWI1.System_Rev) FROM DimWorkItem DWI1 WHERE DWI1.System_Id = DWI.System_Id)
AND FWILH.SourceWorkItemID IN (SELECT DWI2.System_Id FROM DimWorkItem DWI2 WHERE DWI2.System_WorkItemType = N'Bug');
i just clicked on Advanced mode in Column Group, and then in Row Group Side i set Fixed Data=true for first top static. I'm using local report not server report and i'm displaying that local report in Reportviewer. Now also its not working....
View 6 Replies View RelatedIs there any thing like Report header in SSRS ? As a work around I am using a Rectangle control in the page header which I make visible if page number is 1 otherwise not visible. But if its invisible only the other items in the header seem to move up while the body height remains unchanged which I do not want. I want the body height to increase if the Report header is absent. Please let me know if I am missing something or if the SSRS has something like Report header already.
View 6 Replies View Related
Is there anyway to create a Report Header in SQL Reporting Services?
I am guessing "no", but I have to at least try and ask away.
Okay, I have had reports where on the first page they want a report header, and then on the 2nd and the consequent pages they want a page header. This is simple, in the Page Header I put the text box(s) for the Report Header in one Rectangle and then the text box(s) for the Page Header in another Rectangle, stack the Rectangles on to of each other, and set the visibility property of the panels accordingly.
I also see on the table control (which I am using on my report), you can set the table header row(s) to either print on every page or only on the first page.
Neither of these options will work for the report I am trying to build based on a Crystal Report.
I have a page header that needs to appear on every page including the first page. It is about 3/8" tall. And then there is a requested report header that should only appear on the first page. The report header is about 2" tall. So if I try my trick I used before, I will have 2" inches of white space on the 2nd and consequent pages. The Report Header would correctly print on the first page, but the size of the Rectangle (even if the visible property is set to false) will still eat up white space.
Is there anyway around this, or will I need to have the users redesign their report to fit SQL reporting services?
Let me know if you have any ideas.
Thank you,
T.J.
I've got a feeling that the answer is, "can't be done," but I'll go ahead and ask the august members of this forum, anyway. Is it possible to alter the placement of the Parameter fields when previewing a report?
At the moment, it seems that they form in a column of twos, reading from left to right. I see how the ORDER is affected, by changing the order of the parameters in the Report Data window, but can I change the number of columns?
I have a tablix report (SSRS 2008) when I render it in excel my client always need to see the row headers as fixed one i.e when he/she scrolls report from row 20 scrolling should begin and always want to see first 20 row and next should be scrolling. Is this possible.
View 3 Replies View RelatedI have created a new report.what i do in application is i compress the image and save it in database.now i need to retrieve the compressed image and display in the report. I have used the following code to decompress the binary data save in the image.
I dont know after that what should i do. How to show the picture in SSRS Report. I need to show picture in many reports.one of my doubt is how to call this function in SSRS Report. The function accepts input as byte but in database the column in varbinary.
Should I convert the input type of function to varbinary instead of byte array?
Public Function Decompress(ByVal arr As Byte()) As Byte()
Dim notCompressed As Boolean
notCompressed = False
Dim MS As MemoryStream
MS = New MemoryStream()
[Code] ....
How do I add a hard page break in the middle of a two page report? I use Microsoft reports for windows.
View 5 Replies View Relatedhai iam new to ssrs, please help me.
i have student billbale information assume what ever data it. i need to to dispaly total amount for the student at
Bottom Of Report By Daily, Weekly, Monthly, SYTD . take any example, i want to know formula.
thanks to advanced
Jacks v
I need some help. I am writing a report in SSRS 2005 that I then need to export to Excel. When I put a report header I would expect the header to not display in the Excel spreadsheet until the Print Preview or the Print. The report footer works just fine I put some text in the footer, and it shows up in the footer. The header though, shows up as a row in the Excel spreadsheet that then causes columns to merge. How do I get the report header to act like a page header?
View 1 Replies View Related I would like to display different addresses in the same list:
I have the query for married couples working, Also, I have a separate query of non-married people working.I would like to create a separate datasets for unmarried people in the same report.-Is there way to setup another the second data set without duplicating the fields from the first datasource. I tried to use alias on the second datasets and it did not work okay.