In my report I am having one calculation filed, in that field I want to display only two values before decimal point.
For example, if I am having calculation field value as 3456.54, I need to display as 35.54 or 34.54.
I have a table that contains some data.Â
LabelName
LabelValue
TotalForRetire
10337
dummy1
0
TotalForRelatives
5850
dummy2
0
TotalForDisability
7337
TotalForOrange
23
I have a pie chart and a bar chart.
In the pie chart I want to plot only TotalForRetire and TotalForDisability and TotalForOrange
In the bar chart I want to plot only TotalForRetire,dummy1,TotalForRelatives.
Also, here I want the horizontal axis not to show the label  for dummy1 as the value is 0. How can i do that for each chart?
I am new to SSRS. I created a reporting services with 3 groups. I would like to know how to create different colors for each group so that all my values displayed by color group ?.
View 4 Replies View RelatedI am having values as below:
99.87
99.96
8.67
And my output should be as:
99.8
99.9
8.6
How can I do this
On our project we export SSRS reports to Excel. Report Definition Language (RDL) enables you to use several measurement units (for example, inches, pixels, centimeters, and points) to specify position and size values. However, Excel uses only points. Therefore, the SSRS Excel rendering extension converts the height and width of the table, the heights of the rows, and the widths of the columns to points.
This process may include rounding some values. In this situation, the table height or width and the sum of the row heights or column widths are different. To compensate for the difference, the SSRS Excel rendering extension inserts a small row or column to the workbook.
To prevent that ‘hidden’ row or column, we configure the table height and width to a value specified in "pt" (points) rather than "cm". 1 cm is about 28 points. Is it possible to configure SSRS to use points by default while designing a report?
I have this issues with empty points in a Line Chart. How to make it work with dynamic values in the series and some dates in the category, how to join the "data" values for a "series"where there are no category value. So far I cannot see any fix that would make it work by joining the data points with the "average" data on a empty point (no category value) and with the same color on the line.
View 2 Replies View RelatedI have SQL Server 2012 SSIS. I have Excel source and OLE DB Destination.I have problem with importing CustomerSales column.CustomerSales values like 1000.00,2000.10,3000.30,NotAvailable.So I have decimal values and nvarchar mixed in on Excel column. This is requirement for solution.However SSIS reads only numeric values correctly and nvarchar values are set as Null. Why?
CREATE TABLE [dbo].[Import_CustomerSales](
 [CustomerId] [nvarchar](50) NULL,
 [CustomeName] [nvarchar](50) NULL,
 [CustomerSales] [nvarchar](50) NULL
) ON [PRIMARY]
I have a scatter chart in SSRS (SQL Server 2012, Visual Studio 2010) that is producing the following:
There are five data points on there, however the result set I am using has 10 rows (a 'Completed Date' of datetime and a 'Lateness' integer whose values can be positive or negative.
This is the Dataset and the results it produces:
SELECT DISTINCT TOP 10
a.ACTIVITY_NAME As [Activity Name]
, ad.COMPLETED_DATE As [Completed Date]
, ad.DAYS_LATE As [Lateness]
FROM ACTIVITIES a
JOIN ACTIVITY_DATA ad ON ad.ACTIVITY_ID = a.ACTIVITY_ID
[code]....
How can I tell SSRS to show every data point in my chart?
I would like to display a portion of report where there is data or no data
There is data subreport  display  Â
   Product Name Latex Gloves Â
   Product ID   Â
xxxx5678
 There NO data in the subReport
Â
  Product Name             Â
  Product ID  Â
HI All,
I use MSSQL as my database and ASP.NET as my front application. I want to display Price value S$23.68.
The dayatype I used is smallmoney, but it display: S$23.6800. HOw do I control the number of decimals point in the column of MSSQL??
Thanks a lot
Suigion
I have a column in a table with a data type of float.
When I update it to store 7.50, it changes it to 7.5
Is there any way to force it to store 2 decimal points?
Hi,
The default number of decimal points for 'money' data type is 4. Can I change it as 6?
Eg 120.123456
Thanks!
This sounds so simple but yet don't know why it doesn't work.
i've got two decimal numbers in columns
closingUnits = 25093.53640
closingAmt = 59110.33
i use a derived column transformation to generate a string column which is the division of those two above.
mystrfield = closingAmt /closingUnits = 2.355599
what i want is cast it to just 4 decimal points when i run the expression below it cast it to 4 decimal points but it doesn't do any rounding.
the value i get is 2.3555 when i should get 2.3556
(ISNULL(closingAmt ) || closingUnits == 0) ? "0.0000" : ((closingAmt / closingUnits) < 1 && (closingAmt / closingUnits) > -1 ? "0" : "") + (DT_WSTR,15)(DT_DECIMAL,4)(closingAmt / closingUnits)
The total quantity(sum(woitem.qtytarget) as total) result set is showing more than 6 numbers after the decimal point (example:442.2565485). How can I limit it to 2. (example:442.25)
select wo.num, sysuser.username,sum(woitem.qtytarget) as total
from woitem
join wo
ON wo.id = woitem.woid
Join moitem
on moitem.id = woitem.moitemid
Join mo
ON mo.id = moitem.moid
LEFT JOIN SYSUSER ON mo.userid = sysuser.id
group by sysuser.username, num
ORDER BY CAST( REPLACE( wo.num, ':', '.') as decimal(12, 3))
How do I limit the decimal points in a computed column. SSE 2005 seems to override the precision and scale I set in either GUI or by creating the table by query.
Thanks in advance for helping.
Scott
How can I round up a decimal number? in SSRS reports.
View 7 Replies View RelatedFiltrate the value in the column by using filter function..I get error message due to decimal and double.How should I convert to value 55 into double or decimal? Today, I'm using SSRS 2012.
View 4 Replies View RelatedI'm building an invoice report in visual studio for use with MS Dynamics CRM Online. The "quantity" field I reference from the database contains a decimal number with a precision of 2 (i.e - 0.25, 0.50, 0.75, 1.00) due to how I charge my clients as they can purchase 0.25 hours of support for example.
The problem is that I also sell other items that don't require a decimal place in the quantity field and "1 x website design" would look a lot better than "1.00 x website design".
format the quantity field on my report so that it will remove the 0's and the decimal place ONLY when all the numbers after the decimal place are 0. So, to clarify:
1.00 should become 10.25 should stay as 0.250.50 should stay as 0.50 instead of it changing to 0.5 (I can live with 0.5 if 0.50 is a deal breaker.)
When i am exporting into excel then 15.00 value is showing me 15 value.Is there way to show the value 15.00 in excel.
View 3 Replies View RelatedI have a problem with my reports in SSRS 2012,
I have numeric values in database(10.23) but when load this values in a report, I see: 10,23 instead 10.23Â
The regional configuration of server is: Spanish-Peru. Why the report show the value: 10,23 I don't put any regional configuration in the report...
Is it possible to convert for the following SQL statement into SSRS Expression:
SELECT
RIGHT('00' + CONVERT(VARCHAR(2), FLOOR(SUM(Hours))), 2)
+ ':' + RIGHT('00' + CONVERT(VARCHAR(2), FLOOR((SUM(Hours) - FLOOR(SUM(Hours))) * 60)), 2) + ':' + RIGHT('00' + CONVERT(VARCHAR(2),
FLOOR((SUM(Hours) - FLOOR(SUM(Hours))) * 60 - FLOOR((SUM(Hours) - FLOOR(SUM(Hours))) * 60)) * 60), 2)
FROM TableTime
For example I need SSRS expression for converting 1.75 hours into 01:45:00.
I have the following text field in SSRS report:
Version
2.2.32.7
1.0.0.0
2.0.0.0
1.2.0.0
2.1.8.8
1.4.11.0
I want to sort this field interactively.I have already sorted other fields, but as this field is text but has decimal data, its not sorting properly. How do I do this correctly? Once sorted ascending, report should show
Version Â
1.0.0.0Â Â
1.2.0.0Â Â
1.4.11.0Â Â
2.0.0.0Â Â
2.1.8.8Â Â
2.2.32.7
I have a decimal data type column with a record in the following format 20150219 --> yyyyMMdd. And I am trying to convert the return value from SSRS date/time parameter to a decimal value.
The TMDTOP column is the decimal data type with date records in yyyyMMdd format.
My return parameter is the following:
=IIf(IsNothing(Parameters!SystemDate.Value),Fields!TMDTSY.Value,CDec(Format(Parameters!SystemDate.Value,"yyyyMMdd")))Â
When I try to run the report I get the following error:
Failed to evaluate the FilterValue of the DataSet ‘DataSet1’. (rsFilterEvaluationError)
I'm trying to change the background color in a field based on its number value being greater than another number value in an adjacent field. The issue I am having is the format, it's like a software version string or IP address (in this case, it is A/V Signature Versions) where the length of the numbers between the decimal places can be different, and that seems to throw off the comparison.
For example (these are actual values I am comparing);
1.201.1054.0 should evaluate as greater than 1.201.2.0 but when compared, evaluates as FALSE.
Start End Duration
11/20/2007 12:05:57 PM
11/20/2007 12:08:06 PM
00:02:09.6570000
Duration =(Fields!end.Value-Fields!startdate.value) i get the output as shown above.
I need to round that output to 2 decimal places and display it as 00:02:09.65
Any ideas?
I have a situation in SSRS to get the common values between the two columns where the values are sorted comma separated as below.Ex:
ColumnA :  abc,cde,efg  Â
ColumnB : cde,xyz,abc  Â
the result in  Â
ColumnC : cde,abc
similarly Column A and B will have n number records. I need to right an expression or the Code function to get the required result in ColumnC. I am using SharePoint Lists as Datasource. Cannot write SQL query to achieve this requirement.
I am SSRS user, We have a .net UI from where we want to pass multi select values, but these values are comma separated in the database. how can I write a sql query such that when I select multi values on my UI, the comma separated values are take care of.
View 5 Replies View RelatedI am using VS 2010 and the SSRS that came with it. I am sure its SSRS 2008. Anyway, I added a report file to the project, added an ObjectDataSource and connected this to SQLServer 2008, and display the dataset on the report. The report is using ScriptManager, ReportViewer1, and Report1.rdlc file. I preview the dataset and I have multiple row returned. The problem is I only have one row displayed on the report. Maybe I did a quick and dirty report? What setting of properties did I missed?
View 8 Replies View Related
I have a file directory of tiff images that I need to display dynamically with reporting services. I receive the following error message: "The value of the MIMEType property for the image €˜image1€™ is €œimage/tiff€?, which is not a valid MIMEType." After looking it up sure enough tiff is not a valide type. Does anyone know of a way to display tiff images in reporting services.
Thanks,
Ross
I have a database that yield 50 different reason codes
=Fields!Reasons_Type.Value
Each reasons code yields a total
i.e.
Appeal 4
Loss 5
Won 0
How can I display all 50 rows of data regardless if there is a total value.
I have Successfully deployed the report in Report Server.
And i also successfully called it from Web application using VS 2005.
But the problem is,I am able to view only half of the report in Web Browser.It was Shrinked to Left side of the browser.
I am getting total report when i browse from Report Server URL directly.
Any body pls help me to solve this.
I am creating a table on SQL Server. One of the columns in this new table contains whole integer as wells as decimal values (i.e. 4500 0.9876). I currently have this column defined as Decimal(12,4). This adds 4 digits after the decimal point to the whole integers. Is there a data type that will have the decimal point only for decimal values and no decimal point for the whole integers?
View 2 Replies View RelatedI have a report created in Business Intelligence Project.I want to trigger my report result. If it has no returned value, it creates error message displayed on the screen. How could I do this?
Any guidance please.
thanks
-Ron-