Just upgraded to Windows 10. My SSRS reports, SharePoint 2013 integrated, still work but have no scroll bars. I can use the touchscreen to scroll left and right. Mouse wheel or any other attempts to scroll the report view don't work.
View 4 RepliesWhen I try to open the Powerview report in the new Windows 10 Explorer (MS Edge), I am asked to install Silverlight.
When I try to install this, it says I already have it installed so I can’t proceed in opening the Powerview report.
Is it possible to have the value labels always on top of the bars of a bar chart?
On the Chart Series Labels properties under Appearance, I used Top for Position, but if the bar reaches the top of the chart area (and that is determined automaticaly by the Y Axis that and can't be a fixed value).
I can't print reports using Microsoft Edge from Windows 10 With IE 11 Works fine.I've tried regsvr32 with rsclientprint64.dll but it's not working.
View 8 Replies View RelatedA customer would like to show speech bubbles with a short text above some bars in a bar chart (similar to the image shown below). Is this possible with SSRS?
View 7 Replies View RelatedI was using Windows 7 and had SSRS 2014 installed.Having set up the inbound rule on Windows Firewall (port 80), to allow SSRS through, I was able to browse to the Report Manager URL, by opening up Internet Explorer as 'Administrator'..
However, now that I have upgraded to Windows 10, I am unable to open the URL.In fact there is now way for me to open Edge as administrator and open my Report Manager URL.
I've installed the Developer's edition of SQL05 on my PC at home. I am able to open the reporting services via the Manager Studio and Windows login under my username and password, however I cannot open it in my browser when I enter the
http://computername/reports address. I get a login dialog and enter "computername/myloginID" for the user and my local login password. It will not accept the login and reprompt until I exceed 3 tries.
I also tried logging in with the PC's admin id and password as well as the sa account name and password.
Any ideas on what I missed in the setup or security?
Thanks for any assistance anyone can provide
mike...
I want the header to be visible while scrolling. After changing on the static Properties FixedData=True, it is working on BIDS and Internet Explorer 11 . But is does not work in Chrome. Most of my users are using Chrome. Is there any way to fix it for google Chrome.
View 2 Replies View RelatedDear all,
I have a client that has 4 reports; 1 main, and 3 that are rendered when the user clicks the report data on the main report (which passes parameters to generate the other 3).
They would like to have a back button in the report header of the 3 reports (they don't want to use the browser back button).
Is this possible using a text box, then editing the navigation properties and does anyone have an example? Or am I missing something quite obvious?
Any help would be gratefully received!!
Dan
I am facing an issue when report with graph deployed to BI, I can see the misalignment issue in the browser however, when report is run in the Report Builder/SQL Server Data tool or export into PDF then there is no issue.
How to fix the misalignment issue of the graph in the browser. See the both graph below -
Graph Misalignment Issues Screengrab in Browser
Graph without misalignment issue in PDF or Report development tool
I am using the Internet Explorer browser.
We recently upgraded from ReportViewer 9.0 to 10.0 Control in our ASP.NET application, and face some strange issues after the upgrade. When we press the Back button to go to a page that was rendering a report with one or more single-select drop down lists, the selected index in the drop down is reduced by 1, and the report doesn't render until I press "View Report". I verified that exact same setup works well with ReportViewer 9.0.
View 2 Replies View RelatedI have designed plenty of reports in VS 2005 and have been deployed on the reporting server. I have been designed one web page which shows UI through which user can access which ever reports he/she wants. I have kept some buttons on UI. When button is clicked appropriate report accessed and displayed on the browser.
Problem is that, report width is about 40 - 50 % of the screen and report viewer shows the report on the left align of the screen. I just want to show the report at the center of the screen. Also, any property I can use to set the report size in the proportion of screen in Percentage(%).
Hello,
I am trying to print a report in landscape mode from VS 2003 from designer preview or at run time. The users don't want to change a mode manually. I tried to make width 11 or 11.5 in and height 8.5in with zero margins and 0.5in (tried a lot of combinations) - doesn't work! still printing in portrait. Please help! Thank you
I know how to size my report to export successfully to A4 portrait PDF and I can position the report in the centre of the browser window BUT I can't do both! I would really like to be able to position it in the centre of my browser window AND be able to print to A4 portrait PDF. If I have the report in the centre (by adjusting the body to take up the whole screen and positioning the report in the centre), it is cut in half when exported to PDF. I can only get it to export to PDF correctly, if the report is aligned to the left of my screen in the browser. Is there a way to move the body to the centre or any other tricks?
View 5 Replies View Relatedafter installing SQL Server 2008 R2 and the Reporting Services, I've managed to access the Report Manager URL....Reports through the web browser on the machine itself. But if i am trying to connect to on my client browser it does not find the Report Server.Do I need to configure the server in any way? Do I need to configure the firewall?
View 2 Replies View RelatedI have a chart with series that needs conditional colour for three conditions. One condition must be transparent. I have tried the various IFF or SWITCH expressions below and some work fine in SSDT but when I deploy them to the browser the formatting is lost. This simple IFF expression works. The series is transparent as required both in SSDT (Visual Studio BIDS) and IE11 and Firefox browsers but I need two other conditions.
=IIF(Fields!ExhibitionID.Value = -1, "#00ffffff", "Red")
Both of the expressions below work in SSDT (Visual Studio BIDS) as expected but when deployed to the browser none of this formatting is rendered and all series are in blues even the ‘transparent’ series. No red at all.
=IIF(Fields!ExhibitionID.Value = -1,"#00ffffff", IIF(Fields!ExhDepartment.Value = 27,"Orange","Red"))
=Switch(Fields!ExhibitionID.Value
= -1,"#00ffffff",Fields!ExhDepartment.Value = 27,"Orange",(Fields!ExhDepartment.Value <> 27) AND (Fields!ExhibitionID.Value <> -1),"Red")
I have tried deleting various files RDL and DATA. I have tried uploading the file from report manager in IE and I have tried editing the file in report manager.
I have finally have reporting services up and running. A list of all built-in reports have been populated under Monitoring>Reports but when I click on them I get the results shown in the screen shot attached. Below is the error I get when I try to open any report from my IE browser. I have confirmed SSRS is running on my SQL server. I actually had to start it in order to get the list of reports to populate becasue it was stopped. An error has occurred during report processing. (rsProcessingAborted) Cannot impersonate user for data source 'AutoGen__5C6358F2_4BB6_4a1b_A16E_8D96795D8602_'. (rsErrorIm personatingUser) Log on failed. Ensure the user name and password are correct.
View 4 Replies View RelatedI did the following steps:
1. Created a report using SQL Reporting Services. (OK)
2. Deployed the project (ABC) into the ServerX. (OK)
3. Opened the SQL Reporting Services using the Report Manager on localhost of the ServerX. (OK)
4. Opened the ABC folder. Files deployed. (OK)
5. Created two subscriptions. One (Service1) for printing to the Printer. One (Service2) for saving into a file. (OK)
6. Opened the Service1. In the View Tab, after entering the Report Parameters, clicked on "View Report". (OK)
7. I expected view to show what I viewed in the Project (ABC). (NOK - It printed a wrong format. Alignment was completely different)
8. Tried to export to a TIFF file expecting to see the same view as I saw in the Project (ABC). (NOK - It printed a wrong format. Alignment was completely different)
9. Tried to export to a PDF file expecting to see the same view as I saw in the Project (ABC). (NOK - It printed a wrong format. Alignment was completely different)
10. In the subscriptions, I ran the Service1 to print the report from the SQL Reporting Services directly onto the Printer. (NOK - It printed a wrong format. Alignment was completely different)
Is this an expected issue with SQL Reporting Services which incase doesnt make any sense to use it. Or it is an issue with my code. All I assumed that I should expect from SQL Reporting Services is: if I create a Report and I preview the Report, I should get a WYSIWYG formats.
Half the way through our project, we are completely stuck up. SOS!!!
I did the following steps:
1. Created a report using SQL Reporting Services. (OK)
2. Deployed the project (ABC) into the ServerX. (OK)
3. Opened the SQL Reporting Services using the Report Manager on localhost of the ServerX. (OK)
4. Opened the ABC folder. Files deployed. (OK)
5. Created two subscriptions. One (Service1) for printing to the Printer. One (Service2) for saving into a file. (OK)
6. Opened the Service1. In the View Tab, after entering the Report Parameters, clicked on "View Report". (OK)
7. I expected view to show what I viewed in the Project (ABC). (NOK - It printed a wrong format. Alignment was completely different)
8. Tried to export to a TIFF file expecting to see the same view as I saw in the Project (ABC). (NOK - It printed a wrong format. Alignment was completely different)
9. Tried to export to a PDF file expecting to see the same view as I saw in the Project (ABC). (NOK - It printed a wrong format. Alignment was completely different)
10. In the subscriptions, I ran the Service1 to print the report from the SQL Reporting Services directly onto the Printer. (NOK - It printed a wrong format. Alignment was completely different)
Is this an expected issue with SQL Reporting Services which incase doesnt make any sense to use it. Or it is an issue with my code. All I assumed that I should expect from SQL Reporting Services is: if I create a Report and I preview the Report, I should get a WYSIWYG formats.
Half the way through our project, we are completely stuck up. SOS!!!
I have a server that has SSRS 2012. It was running ok.
And just now I installed IIS to try something and I am noticing that SSRS isn't coming up when I put in the usual URL in the browser.
Hi.
I have a problem.
I do a basic report with just one simple table:
_id
_name
_comment
_file
I'm able to get all informations into a table. But for the file, I created a URL Link for this file.
But when the reporting is generating in html, if I click on the file's link, nothing happens. But I can dowload the file with a right click. And if I see proprieties of the link, the link is rights, and it's works good if I copy and paste it on the IE url bar.
So for summary, my problem is : nothing happens if I click on the file, but a want a window's opening with the choose "Open with" or "Save on the disk".
Somebody can help me?
Thanks
I want to use mapbox static map api to build report in SSRS. But i have i problem, that SSRS does not understand image.
View 5 Replies View Relatedthe Dataset in my report doesn't update the fields' values from the database. I refresh the dataset manualy in the SQL Server Business Intelligence Development Studio to see the new values in the report.
View 14 Replies View RelatedI installed Reporting Services 2014 on Windows 7. When i am trying to start home page i can see only HTML page and the text: "localhost/reports - /",then double lines (<hr><hr>) and text "Microsoft SQL Server Reporting Services Version 12.0.4100.1"Maybe the windows user (SERVER_NAMEADMINISTRATOR) has not sufficient permissions ?
View 3 Replies View Relatedi would like to show all Labels available in a Chart and rotate the Labels 90°. How can i do that ? I changed the Propertie "Interval" to 1, "LabelsAngle" to 90, "LabelsAutoFitDisabled" to true in my Chart Axis.
View 12 Replies View RelatedI have a parameter that chooses its available items from a query (with a label and a value column). I set the default for the parameter to the a particular value.
It works in Preview from design mode, but when I deploy it and run the report, it does not set the default.
For the past couple of days I've been having an issue with Reporting Services. From what I can understand reporting services doesn't work well when exporting to word.
The scenario is quite simple, I am developing a report for a client with a 'master page', which works as the cover, and executes 2 sub-reports with one table each, nothing fancy. We don't export this report to pdf, because the internal client has to attach another report that is impossible to automate, so they generate that report via excel and integrate it on our word document before sending the document to their business partners.
Our main problem is that we can't export the header/footers to word.
I'll go to a dataset, open up the query designer, add a new parameter, then refresh the fields, but the parameter won't be added as a report parameter. If I go to the dataset properties under the list of parameters, the value in the dropdown will be blank. However, sometimes this will automatically add.
Is this a bug in Visual Studio? How do I get around this?
Hi,
I am trying to install SQL 2k5 on Windows SBS premium edition , everything goes well but when I try to connect to the local database through Management studio it says connection failed & one of the possible reasons it says is SQL Browser service is not started.I tried to start the service but, when I go to services I could not find any such service in the list.There is only SQL server VSS writer service. Pls help me to come out of this situation. I tried reinstalling SQL server few times but in vain. Pls help me.
Thanks in advance.
Ramesh
Is it true that the Report Manager is not designed to be run on non-IE browsers like Firefox etc?
I can't even view a proper report if it's launched by Firefox......:eek:
I have configured master data services in my DB server and when i am going to explorer the entities and respected data by using navigating as below
[URL] -->Click to Explorer
I am able to select data for only one default entity, in entities drop down is getting hidden back side , please find below snap to clearance.
Note: I am using Internet explorer (11.0.9600.17239) to browse the solution.
I am designing a report in which the edges of the tables should be curved. Is there any way to make the edge of the tables rounded? Could any one suggest for this. I am using MS Reporting service 2003
View 2 Replies View Related
Hello,
I am trying to migrate my reports from SQL server 2000 reporting services 32bit to 2005 64bit. I am following the migration steps that MS specified.
Restored my Reportserver and ReportserverTempDB databases
Then I was using the configure Report services to upgrade these databases but I always end up getting the follwoing exception when I run the upgrade on the "Database Setup" configuration for 'ReportServerTempDB' database
System.Data.SqlClient.SqlException: Could not locate entry in sysdatabases for database 'ReportServerTempDBTempDB'. No entry found with that name. Make sure that the name is entered correctly.
at System.Data.SqlClient.SqlConnection.OnError(SqlException exception, Boolean breakConnection)
at System.Data.SqlClient.SqlInternalConnection.OnError(SqlException exception, Boolean breakConnection)
at System.Data.SqlClient.TdsParser.ThrowExceptionAndWarning(TdsParserStateObject stateObj)
at System.Data.SqlClient.TdsParser.Run(RunBehavior runBehavior, SqlCommand cmdHandler, SqlDataReader dataStream, BulkCopySimpleResultSet bulkCopyHandler, TdsParserStateObject stateObj)
at System.Data.SqlClient.SqlCommand.RunExecuteNonQueryTds(String methodName, Boolean async)
at System.Data.SqlClient.SqlCommand.InternalExecuteNonQuery(DbAsyncResult result, String methodName, Boolean sendToPipe)
at System.Data.SqlClient.SqlCommand.ExecuteNonQuery()
at Microsoft.ReportingServices.Common.DBUtils.ApplyScript(String connectionString, String script)
at ReportServicesConfigUI.SqlClientTools.SqlTools.ApplyScript(String connectionString, String script)
It's driving me crazy, why is it looking for 'ReportServerTempDBTempDB' in the catalog instead of 'ReportServerTempDB'?
Is it possible to migrate from 32bit to 64bit?
Any help is appreciated