I need the Trend line for the following data in Line chart they are the following data. The following are the graph are my output and i need the trend line for these Key_gap value.
This is the link [URL] ....
I need the same trend line for the Bar-Chart in SSRS 2005.
I need to create a chart with the following features
1) Bar chart that has data for 3 years (3 series) 2) Line chart that has the same data as per the above points on the bar chart but this is a running total. (3 series) 3) These data points are for the 12 months 4) there should be a secondary axis for the cumulative one
Is there a possibility in SSRS to have One stacked bar of cumulative sum of different ID's and and Line Chart at left hand of the Bar which will show the Progress as soon as the ID turn to Competed status.
I have been trying to do this , however there is huge problem of scaling:
The line should be finished at all the completed ID's SUM which is the lowest stack of the Bar.
However , the bar gets stretched to all of the space.
I have tried to place it into Tab lix, But it doesn't work.
In this, I need to add line charts for the three years specifying the running total. I already have bar charts for the respective years. This is the query that I used to get the dataset.
SELECT [Parent Name], [ID], [Year], [Month], SUM([Value]) AS 'Running Total' FROM Regulus_Data_Backup GROUP BY [Parent Name], [ID], [Year], [Month] order by [Parent Name],[ID], [Year], DATEPART(mm,CAST([Month]+ Convert(varchar(4),[Year]) AS DATETIME))
Then I added a series with a expression that had the chart type as line as shown below.
My Expression was =RunningValue(Fields!Running_Total.Value,SUM,"MonthWiseData")
My 3 parameter was "MonthWiseData" which is my dataset name. Is this correct? I use the same dataset to get the bar charts too. I get a error message now when loading the report saying "the scope parameter must be set to a string constant.
My goal is to get bar values for 3 years for the 12 months and in the same chart get the cumulative numbers for the 3 years for the 12 months. How can I do this?
I have this issues with empty points in a Line Chart. How to make it work with dynamic values in the series and some dates in the category, how to join the "data" values for a "series"where there are no category value. So far I cannot see any fix that would make it work by joining the data points with the "average" data on a empty point (no category value) and with the same color on the line.
I have a stacked bar chart which i notice a vertical line char. how can i removed this vertical line? I already modified the properties under smart labels under calloutlineanchor, calloutlinestyle, calloutstyle to None but still getting this vertical lines. another things is the data label as you can see in the the first column the 1.8% should be place under the gray color but its already shown before the orange color.
What is the best optimised options to display the date labels with bi-weekly intervals starting date Date from one month to three months future from the current date?
As per above requirements, I have built the below line graph query and graph, currently it only displays the date labels as per data but I need to display date labels with bi-weekly intervals starting date from one month to three months future from the current date. Also another issue found, if there are few more date labels then does not show all labels on horizontal axis.
Select /* Set Week End date as Sunday */ DATEADD(DAY, 7 - DATEPART(WEEKDAY, t.TaskBaseline0FinishDate), CAST(t.TaskBaseline0FinishDate +1 AS DATE)) as[WeekEnd] ,count(t.TaskBaseline0FinishDate) as Baseline ,count(t.TaskFinishDate) as Finish
I have an existing stacked chart with line graph as secondary. the value of line graph is finished good qty. now i need to removed the finished good and change it with a target line chart. May i know on how to work change this to line. The target value is 68%.
When I export the report in excel format the chart is displayed as picture. I want it to be displayed as editable chart.Does Office Writer work in this situation and did anyone use Office Writer to accomplish same type of problem.Is there any other method or product we can use instead of the office writer.
We have a line graph which plots the actual data points (x,y), everything is working fine with this graph. Now we need to add a trend line to this existing graph after going thro. the articles we came to know that there is no direct option in SSRS to draw a trend line. So we need to calculate the trend values ourselves which we need to plot as atrend line. This trend line is similar to the trend line which comes in Excel chart, do anyone know how to calculate the trend values from the actual data points. We got through several formulas, but were not clear, have anyone tried out exactly the same, if so please help us out by providing an example to calculate the trend values.
Hopefully someone can clarify for me. I'd like to use custom colors for a chart that I have created. I've seen some code examples but I'm not really sure what to do with them. I've been using reporting services for like 2 days and I don't know xml or vb script, so I apologize for the probably stupid question. Thank you in advance.
I am trying to display a chart from a data source that runs a stored procedure. The data dislays fine in the dataset tab, however, when I try to preview the report I get the following message:
'An error occurred during local report processing. The definition of the report 'reportname' is invalid. An internal error occured on the report server. See the error log for more details'.
I have looked at the error logs, but they do not help. I am thinking that my stored procedure is pushing a limit of the chart report. If I display the same data in a table, it displays fine, it is only in a chart. As I stated, the data is displaying in the dataset grid.
Can anyone give me an idea as to what my problem might be? I have other charts that run fine, but not using a stored procedure like the one below where I am performing multiple selects.
Below is the stored procedure:
set ANSI_NULLS ON
set QUOTED_IDENTIFIER ON
GO
-- =============================================
-- Author: Tim Olig
-- Create date: 09/20/07
-- Description: Returns Total Stored Procedure
-- =============================================
ALTER PROCEDURE [dbo].[sp_db_ReturnsSummary]
@Date smalldatetime
AS
BEGIN
SET NOCOUNT ON;
Select rtsum.FiscalYear,rtsum.Period,
rtsum.RMAComplete_ALL,
rtsum.RMAComplete_ANO,
rtsum.RMAComplete_EXT,
rtsum.RMAComplete_FAB,
rtsum.RMAComplete_SUN,
rtsum.RMAComplete_SUP,
salessum.ShipRev
from
(SELECT
CASE WHEN datepart(YY,returns.invdate) = 1900 then 2008 else datepart(YY,Returns.Invdate) end as FiscalYear,
CASE WHEN datepart(YY,returns.invdate) = 1900 then 'PENDING'
WHEN len(datepart(mm, returns.invdate)) = 1 THEN 'P0' + ltrim(str(datepart(mm, returns.invdate)))
WHEN len(datepart(mm, returns.invdate)) = 2 THEN 'P' + ltrim(str(datepart(mm, returns.invdate))) END AS Period,
"RMAComplete_ALL" = sum(returns.TotalCredit),
"RMAComplete_ANO" = sum(case when returns.respdept = 'ANODIZING DEPT' then (returns.TotalCredit) else 0 end),
"RMAComplete_EXT" = sum(case when returns.respdept = 'EXTRUSION DEPT' then (returns.TotalCredit)else 0 end),
"RMAComplete_FAB" = sum(case when returns.respdept = 'FAB' then (returns.TotalCredit) else 0 end),
"RMAComplete_SUN" = sum(case when returns.respdept = 'SUNROOF' then (returns.TotalCredit) else 0 end),
"RMAComplete_SUP" = sum(case when returns.respdept = 'SUPPLIER' then (returns.TotalCredit) else 0 end)
FROM [returns]
WHERE invfiscalyear = 1990 or returns.invdate >= @Date
group by datepart(YY,Returns.Invdate), CASE WHEN datepart(YY,returns.invdate) = 1900 then 'PENDING' WHEN len(datepart(mm, Returns.invdate)) = 1 THEN 'P0' + ltrim(str(datepart(mm, Returns.invdate))) WHEN len(datepart(mm, Returns.invdate)) = 2 THEN 'P' + ltrim(str(datepart(mm, Returns.invdate))) END)
as rtsum
left outer join
(select
datepart(YY,transdate) as FiscalYear,
CASE WHEN len(datepart(mm,transdate)) = 1 THEN 'P0' + ltrim(str(datepart(mm,transdate)))
WHEN len(datepart(mm,transdate)) = 2 THEN 'P' + ltrim(str(datepart(mm,transdate))) END AS Period,
"ShipRev" = sum(case when (OrderType = 'Invoiced' or OrderType = 'ToBeInvoiced') and SalesAcctDesc = 'Sales' then Revenue else 0 end)
FROM sforep where transdate >= @Date
group by datepart(YY,transdate), CASE WHEN len(datepart(mm,transdate)) = 1 THEN 'P0' + ltrim(str(datepart(mm, transdate))) WHEN len(datepart(mm, transdate)) = 2 THEN 'P' + ltrim(str(datepart(mm, transdate))) END)
as salessum
on rtsum.fiscalyear = salessum.fiscalyear and rtsum.period = salessum.period
We are working with scatter chart in reporting services.we need to divide the chart into quadrants.We can use VB code in reporting services.Can anyone let me know the VB code to divide that into quadrants and coloring the quadrants
Hi all--I'm looking at SQL Server 2005 Reporting Services as a possible reporting solution for our data warehouse. One of our reporting requirements is the ability to do Gantt charts--has anyone out there had any experiences with creating one with Visual Studio 2005?
Is it possible to have the value labels always on top of the bars of a bar chart?
On the Chart Series Labels properties under Appearance, I used Top for Position, but if the bar reaches the top of the chart area (and that is determined automaticaly by the Y Axis that and can't be a fixed value).
We are having trouble finding a lot of documentation around configuring the Funnel chart. Specifcally, we would like to know if there's an option to be able to place the lengend title on the actual Funnel layer. Also, we would like to be able to control the order of the funnel layers to match a business process order from top to bottom. It would appear that the Funnel defaults to aphabetical ordering of the layers. Any good reference for the options available?
I have a Pie Chart report that works well until Users discovered that when values are 0% or less across the chart, the Legend returns NaN. How do I format the Legend to return 0% instead of the NaN that Users do not want to see. Below is my express for the Legend Property="#AXISLABEL" & " - " & "#PERCENT{P0}".
I have the above output. When I try to input this as a dataset to a pie chart I don't get the data lables for two slices of the pie chart. Only one slice will show the values when showing data label option is enabled.
For the Pie chart, I have added Soft, Hard and Primary as Values. I haven't added a Category group or a Series group. Why isn't this showing the data labels for the other slices?
Do I need to transform the dataset so that it has a category and the value like below?
I'm using Reporting Services 2008 R2, version 10.50.2550.0, and Visual Studio 2008, version 9.0.30729.4462 QFE. Not sure if the SQL version matters, since I haven't gotten the report out of the development environment.I've read lots of messages, including URL.... that show you can have multiple data entries per row in a Range Bar Chart, simply by turning DrawSideBySide to False.My data set basically contains four pieces of data, LineNumber, Equipment, StartTime and EndTime. I have data like:
(I actually have a date with my datetime entries, but that should give you the idea.) My chart is set up with Values of EndTime and StartTime. If I set my chart up with only Equipment in the Category Groups entry, my chart will show CLM1 from 08:00-08:30, and SS1 from 08:05 to 08:35. No sign of the other entries per equipment, although I added a tablix to retrieve the same data and it all shows up.Changing DrawSideBySide between True, False and Auto has no effect on the data displayed on my chart. If I add StartTime in the Category Groups, I do show all the data, but one row for each piece of data, which isn't what the customer wants.From what I can tell from various sites, I'm set up right, but it just isn't working.
I am designing a bar chart in which five value comes .if all values comes then graph is working fine but my concern is when i have single value then in that case bar gets created on the middle of chart i want to generate the single bar on bottom of the chart.
I have pie chart. In this i have to display the category group name , count as a data label. In this both category name and count should be in seperate line and should be in centre allignment. But for it is not centre allignment. In series label properties i am using this expression,=Fields!Group.Value & VbCrLf & Count(Fields!Countvalue.Value).I am geeting new line. But not in center allignment.
In my Chart I have to keep the angel of the category field fix to 90 degree. When I do this the format of the Label does not look quite right.
I expect Below : I can work Out dd and mm positions ..what I am concerned about the date direction because of which its not quite readable. I have tried many format in label format but it is not giving expected result.
When I place an image WITHIN a chart, it appears in the correct location in DESIGN mode, however, when I preview it, my chart renders...and then the image renders NEXT TO the chart. I can't get the image to display WITHIN the chart area.
I am trying to create a report in report in reporting services.
The requirement is to display the data in a chart. A surface chart to be exact.
It appears that reporting services has most of the Excel type charts available to display the data but I do not see the Surface Chart type. Is this type available in SQL Server 2005 reporting services? If not, is there a 3rd party software available that integrates into BIDS?
I have a chart that I am grouping data by Year, Month, day then Hour (this is to view server performance data) - however i need the label for the hour grouping to be in the format of HH:MM and not H:M by using expression
