Reporting Services :: Error Message When Trying To Open Reports On SCCM 2012 Console And IE Browser
Mar 5, 2013
I have finally have reporting services up and running. A list of all built-in reports have been populated under Monitoring>Reports but when I click on them I get the results shown in the screen shot attached. Below is the error I get when I try to open any report from my IE browser. I have confirmed SSRS is running on my SQL server. I actually had to start it in order to get the list of reports to populate becasue it was stopped. An error has occurred during report processing. (rsProcessingAborted) Cannot impersonate user for data source 'AutoGen__5C6358F2_4BB6_4a1b_A16E_8D96795D8602_'. (rsErrorIm personatingUser) Log on failed. Ensure the user name and password are correct.
View 4 Replies
ADVERTISEMENT
May 26, 2015
We have SCCM 2012 primary site and Remote SQL 2012 server. Due to hardening and password reset we are facing reporting issue.
while we Open the SRS report in SQL server and try to edit the Report (Report Builder) we are getting following error due to which we are unable to configure Reporting Service point in the SCCM 2012 server. We created the New Reporting server database still we are getting the below error.
View 14 Replies
View Related
Aug 17, 2015
When I try to open the Powerview report in the new Windows 10 Explorer (MS Edge), I am asked to install Silverlight.
When I try to install this, it says I already have it installed so I can’t proceed in opening the Powerview report.
View 2 Replies
View Related
May 15, 2015
I have deployed SSRS reports to the Report Server, but am not able to open them in PDF.
View 3 Replies
View Related
Jul 2, 2015
I have SCCM 2012 R2. I'm working on a custom report, using MS SQL Server Report Builder. I have other custom reports that work fine....they prompt for a collection and return results just on that one collection. The problem with the one I'm working on now is that it runs fine except for that....it prompts for a collection, lets you choose one collection,returns the desired info on each line, but it returns all systems, not just the one collection you selected. IOW, I'm having trouble getting the "where" clause to work right.
Here is the code for a report that works (it returns the selected collection and counts the patches needed by each machine):
select
CS.Name0,
CS.UserName0,
CS.ResourceID,
case
when (sum(case when UCS.status=2 then 1 else 0 end))>0 then ((cast(sum(case when UCS.status=2 then 1 else 0 end)as int)))
[code]....
Here is the code for the report that I'm having trouble with. What you see runs but it has none of the collection selection code I've tried since I haven't gotten it to work:
SELECT
DISTINCT(CPU.SystemName0) AS [System Name],
CPU.Manufacturer0 AS Manufacturer,
CPU.Name0 AS Name,
COUNT(CPU.ResourceID) AS [Number of CPUs],
CPU.NumberOfCores0 AS [Number of Cores per CPU],
[Code] ....
get the collection selection code to work in the second (processor count) sample?
View 14 Replies
View Related
Jul 12, 2007
Hi
I'm getting the following error message when I go to the preview tab:
An error has occurred during report processing.
Cannot read the next data row for the data set DataSet1.
What does this mean, and how can I fix it?
View 1 Replies
View Related
Apr 24, 2015
I am trying to configure the reporting for TFS using SQL Server. But I get following error when viewing any report:
So I try to manually process the cube to check if it works. I am following this article: [URL] ....
When I click on GetProcessingStatus and invoke it (with last field set as TRUE) I get following error:
How to resolve this issue and be able to see the reports.
View 5 Replies
View Related
May 22, 2007
I am getting an error message when I try to print using reporting services: "an error occurred during printing (0x80004005)"
View 4 Replies
View Related
Mar 10, 2007
I have a report created in Business Intelligence Project.I want to trigger my report result. If it has no returned value, it creates error message displayed on the screen. How could I do this?
Any guidance please.
thanks
-Ron-
View 3 Replies
View Related
May 9, 2008
I recently installed SQL Server 2005 Enterprise on a machine running Server 2003. I have successfully configured Reporting Services (see below for summary of settings)
- Used the defaults for the Repor tServer and Report Manager Virtual Directories
- Windows Service Identity set to domain user. The domain user is part of the administrator group on the machine and has sysadmin rights to the database
- Web Service Identity set to NT AuthorityNetworkService
When I open http://localhost/reports/, I get the following error:
I have check a bunch of forums, but have no success. Any advise would be greatly appreciated!!
Server Error in '/Reports' Application.
Compilation Error
Description: An error occurred during the compilation of a resource required to service this request. Please review the following specific error details and modify your source code appropriately.
Compiler Error Message: CS0016: Could not write to output file 'c:WINDOWSMicrosoft.NETFrameworkv2.0.50727Temporary ASP.NET Files
eports2cbaf422c4330628App_global.asax.th5hkjqv.dll' -- 'The directory name is invalid. '
Source Error:
[No relevant source lines]
Source File: Line: 0
Show Detailed Compiler Output:
c:windowssystem32inetsrv> "C:WINDOWSMicrosoft.NETFrameworkv2.0.50727csc.exe" /t:library /utf8output /R:"C:WINDOWSassemblyGAC_32System.Web2.0.0.0__b03f5f7f11d50a3aSystem.Web.dll" /R:"C:WINDOWSMicrosoft.NETFrameworkv2.0.50727Temporary ASP.NET Files
eports2cbaf422c4330628assemblydl3a890e9c0 068591f_f54cc701ReportingServicesFileShareDeliveryProvider.DLL" /R:"C:WINDOWSassemblyGAC_MSILSystem.Web.Mobile2.0.0.0__b03f5f7f11d50a3aSystem.Web.Mobile.dll" /R:"C:WINDOWSassemblyGAC_32System.Data2.0.0.0__b77a5c561934e089System.Data.dll" /R:"C:WINDOWSassemblyGAC_MSILSystem.Web.Services2.0.0.0__b03f5f7f11d50a3aSystem.Web.Services.dll" /R:"C:WINDOWSassemblyGAC_MSILSystem.Configuration2.0.0.0__b03f5f7f11d50a3aSystem.Configuration.dll" /R:"C:WINDOWSassemblyGAC_32System.EnterpriseServices2.0.0.0__b03f5f7f11d50a3aSystem.EnterpriseServices.dll" /R:"C:WINDOWSassemblyGAC_MSILSystem.IdentityModel3.0.0.0__b77a5c561934e089System.IdentityModel.dll" /R:"C:WINDOWSassemblyGAC_MSILSystem.ServiceModel3.0.0.0__b77a5c561934e089System.ServiceModel.dll" /R:"C:WINDOWSassemblyGAC_MSILSystem2.0.0.0__b77a5c561934e089System.dll" /R:"C:WINDOWSMicrosoft.NETFrameworkv2.0.50727Temporary ASP.NET Files
eports2cbaf422c4330628assemblydl34a099978 068591f_f54cc701ReportingServicesEmailDeliveryProvider.DLL" /R:"C:WINDOWSMicrosoft.NETFrameworkv2.0.50727mscorlib.dll" /R:"C:WINDOWSMicrosoft.NETFrameworkv2.0.50727Temporary ASP.NET Files
eports2cbaf422c4330628assemblydl3de5a2332 0958a20_f54cc701ReportingServicesWebUserInterface.DLL" /R:"C:WINDOWSassemblyGAC_MSILSystem.Xml2.0.0.0__b77a5c561934e089System.Xml.dll" /R:"C:WINDOWSMicrosoft.NETFrameworkv2.0.50727Temporary ASP.NET Files
eports2cbaf422c4330628assemblydl3498aee86 042473c_93d0c501ReportingServicesCDOInterop.DLL" /R:"C:WINDOWSassemblyGAC_MSILSystem.Runtime.Serialization3.0.0.0__b77a5c561934e089System.Runtime.Serialization.dll" /R:"C:WINDOWSassemblyGAC_MSILSystem.Drawing2.0.0.0__b03f5f7f11d50a3aSystem.Drawing.dll" /R:"C:WINDOWSMicrosoft.NETFrameworkv2.0.50727Temporary ASP.NET Files
eports2cbaf422c4330628assemblydl3cd47089b 0f2a80e_f54cc701Microsoft.ReportingServices.Interfaces.DLL" /R:"C:WINDOWSMicrosoft.NETFrameworkv2.0.50727Temporary ASP.NET Files
eports2cbaf422c4330628assemblydl3f180608d 0083daf_b16dc701Microsoft.ReportingServices.Diagnostics.DLL" /R:"C:WINDOWSMicrosoft.NETFrameworkv2.0.50727Temporary ASP.NET Files
eports2cbaf422c4330628assemblydl323449648 068591f_f54cc701ReportingServicesNativeClient.DLL" /out:"C:WINDOWSMicrosoft.NETFrameworkv2.0.50727Temporary ASP.NET Files
eports2cbaf422c4330628App_global.asax.th5hkjqv.dll" /debug- /optimize+ /w:4 /nowarn:1659;1699;1701 "C:WINDOWSMicrosoft.NETFrameworkv2.0.50727Temporary ASP.NET Files
eports2cbaf422c4330628App_global.asax.th5hkjqv.0.cs" "C:WINDOWSMicrosoft.NETFrameworkv2.0.50727Temporary ASP.NET Files
eports2cbaf422c4330628App_global.asax.th5hkjqv.1.cs"
Microsoft (R) Visual C# 2005 Compiler version 8.00.50727.1433
for Microsoft (R) Windows (R) 2005 Framework version 2.0.50727
Copyright (C) Microsoft Corporation 2001-2005. All rights reserved.
error CS0016: Could not write to output file 'c:WINDOWSMicrosoft.NETFrameworkv2.0.50727Temporary ASP.NET Files
eports2cbaf422c4330628App_global.asax.th5hkjqv.dll' -- 'The directory name is invalid. '
Version Information: Microsoft .NET Framework Version:2.0.50727.1433; ASP.NET Version:2.0.50727.1433
View 5 Replies
View Related
Apr 7, 2006
How does one access a remote SQL Server from the web browser?
Thanks,
-Conrad
View 1 Replies
View Related
Jan 18, 2007
Hi All
i am very new to using sql reporting services. After installation of reporting services and configuration i get this error on the browser.
Can anyone highlight the problem in the configuration?
my system is configured as
Windows 2003 SP1 server
MSSQL 2005 sp1
Server Error in '/Reports' Application.
--------------------------------------------------------------------------------
The current identity (NT AUTHORITYNETWORK SERVICE) does not have write access to 'C:WINDOWSMicrosoft.NETFrameworkv2.0.50727Temporary ASP.NET Files'.
Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code.
Exception Details: System.Web.HttpException: The current identity (NT AUTHORITYNETWORK SERVICE) does not have write access to 'C:WINDOWSMicrosoft.NETFrameworkv2.0.50727Temporary ASP.NET Files'.
Source Error:
An unhandled exception was generated during the execution of the current web request. Information regarding the origin and location of the exception can be identified using the exception stack trace below.
Stack Trace:
[HttpException (0x80004005): The current identity (NT AUTHORITYNETWORK SERVICE) does not have write access to 'C:WINDOWSMicrosoft.NETFrameworkv2.0.50727Temporary ASP.NET Files'.]
System.Web.HttpRuntime.SetUpCodegenDirectory(CompilationSection compilationSection) +3474107
System.Web.HttpRuntime.HostingInit(HostingEnvironmentFlags hostingFlags) +226
[HttpException (0x80004005): The current identity (NT AUTHORITYNETWORK SERVICE) does not have write access to 'C:WINDOWSMicrosoft.NETFrameworkv2.0.50727Temporary ASP.NET Files'.]
System.Web.HttpRuntime.FirstRequestInit(HttpContext context) +3426839
System.Web.HttpRuntime.EnsureFirstRequestInit(HttpContext context) +88
System.Web.HttpRuntime.ProcessRequestInternal(HttpWorkerRequest wr) +149
--------------------------------------------------------------------------------
Version Information: Microsoft .NET Framework Version:2.0.50727.42; ASP.NET Version:2.0.50727.42
thanks
ga
View 4 Replies
View Related
Jan 31, 2008
Where do I look to fix this?
Server status is red.
I think I might have left the domain name blank when I installed this. Is there anyway to enter one later. I have tried to change this through add/remove programs and do not get a chance to change this field
Thanks!
Terry Beckman
<Header>
<Product>Microsoft SQL Server Reporting Services Version 9.00.1399.00</Product>
<Locale>en-US</Locale>
<TimeZone>Central Standard Time</TimeZone>
<Path>C:Program FilesMicrosoft SQL ServerMSSQL.3Reporting ServicesLogFilesReportServerService__main_01_31_2008_08_18_22.log</Path>
<SystemName>JPADESKTOP1</SystemName>
<OSName>Microsoft Windows NT 5.1.2600 Service Pack 2</OSName>
<OSVersion>5.1.2600.131072</OSVersion>
</Header>
ReportingServicesService!library!4!1/31/2008-08:18:22:: i INFO: Initializing ConnectionType to '0' as specified in Configuration file.
ReportingServicesService!library!4!1/31/2008-08:18:22:: i INFO: Initializing IsSchedulingService to 'True' as specified in Configuration file.
ReportingServicesService!library!4!1/31/2008-08:18:22:: i INFO: Initializing IsNotificationService to 'True' as specified in Configuration file.
ReportingServicesService!library!4!1/31/2008-08:18:22:: i INFO: Initializing IsEventService to 'True' as specified in Configuration file.
ReportingServicesService!library!4!1/31/2008-08:18:22:: i INFO: Initializing PollingInterval to '10' second(s) as specified in Configuration file.
ReportingServicesService!library!4!1/31/2008-08:18:22:: i INFO: Initializing WindowsServiceUseFileShareStorage to 'False' as specified in Configuration file.
ReportingServicesService!library!4!1/31/2008-08:18:22:: i INFO: Initializing MemoryLimit to '60' percent as specified in Configuration file.
ReportingServicesService!library!4!1/31/2008-08:18:22:: i INFO: Initializing RecycleTime to '720' minute(s) as specified in Configuration file.
ReportingServicesService!library!4!1/31/2008-08:18:22:: i INFO: Initializing MaximumMemoryLimit to '80' percent as specified in Configuration file.
ReportingServicesService!library!4!1/31/2008-08:18:22:: i INFO: Initializing MaxAppDomainUnloadTime to '30' minute(s) as specified in Configuration file.
ReportingServicesService!library!4!1/31/2008-08:18:22:: i INFO: Initializing MaxQueueThreads to '0' thread(s) as specified in Configuration file.
ReportingServicesService!library!4!1/31/2008-08:18:22:: i INFO: Initializing IsWebServiceEnabled to 'True' as specified in Configuration file.
ReportingServicesService!configmanager!4!1/31/2008-08:18:22:: w WARN: WebServiceAccount is not specified in the config file. Using default: JPADESKTOP1ASPNET
ReportingServicesService!library!4!1/31/2008-08:18:22:: i INFO: Initializing MaxActiveReqForOneUser to '20' requests(s) as specified in Configuration file.
ReportingServicesService!library!4!1/31/2008-08:18:22:: i INFO: Initializing MaxScheduleWait to '5' second(s) as specified in Configuration file.
ReportingServicesService!library!4!1/31/2008-08:18:22:: i INFO: Initializing DatabaseQueryTimeout to '120' second(s) as specified in Configuration file.
ReportingServicesService!library!4!1/31/2008-08:18:22:: i INFO: Initializing ProcessRecycleOptions to '0' as specified in Configuration file.
ReportingServicesService!library!4!1/31/2008-08:18:22:: i INFO: Initializing RunningRequestsScavengerCycle to '60' second(s) as specified in Configuration file.
ReportingServicesService!library!4!1/31/2008-08:18:22:: i INFO: Initializing RunningRequestsDbCycle to '60' second(s) as specified in Configuration file.
ReportingServicesService!library!4!1/31/2008-08:18:22:: i INFO: Initializing RunningRequestsAge to '30' second(s) as specified in Configuration file.
ReportingServicesService!library!4!1/31/2008-08:18:22:: i INFO: Initializing CleanupCycleMinutes to '10' minute(s) as specified in Configuration file.
ReportingServicesService!library!4!1/31/2008-08:18:22:: i INFO: Initializing DailyCleanupMinuteOfDay to default value of '120' minutes since midnight because it was not specified in Configuration file.
ReportingServicesService!library!4!1/31/2008-08:18:22:: i INFO: Initializing WatsonFlags to '1064' as specified in Configuration file.
ReportingServicesService!library!4!1/31/2008-08:18:22:: i INFO: Initializing WatsonDumpOnExceptions to 'Microsoft.ReportingServices.Diagnostics.Utilities.InternalCatalogException,Microsoft.ReportingServices.Modeling.InternalModelingException' as specified in Configuration file.
ReportingServicesService!library!4!1/31/2008-08:18:22:: i INFO: Initializing WatsonDumpExcludeIfContainsExceptions to 'System.Data.SqlClient.SqlException,System.Threading.ThreadAbortException' as specified in Configuration file.
ReportingServicesService!library!4!1/31/2008-08:18:22:: i INFO: Initializing SecureConnectionLevel to '0' as specified in Configuration file.
ReportingServicesService!library!4!1/31/2008-08:18:22:: i INFO: Initializing DisplayErrorLink to 'True' as specified in Configuration file.
ReportingServicesService!library!4!1/31/2008-08:18:22:: i INFO: Initializing WebServiceUseFileShareStorage to 'False' as specified in Configuration file.
ReportingServicesService!servicecontroller!9!1/31/2008-08:18:23:: Total Physical memory: 1055309824
ReportingServicesService!library!4!1/31/2008-08:18:23:: e ERROR: Throwing Microsoft.ReportingServices.Diagnostics.Utilities.UnknownUserNameException: The user or group name 'JPADESKTOP1ASPNET' is not recognized., ;
Info: Microsoft.ReportingServices.Diagnostics.Utilities.UnknownUserNameException: The user or group name 'JPADESKTOP1ASPNET' is not recognized.
ReportingServicesService!servicecontroller!4!1/31/2008-08:18:23:: e ERROR: Exception caught starting RPC server: Microsoft.ReportingServices.Diagnostics.Utilities.UnknownUserNameException: The user or group name 'JPADESKTOP1ASPNET' is not recognized.
at Microsoft.ReportingServices.Library.Native.NameToSid(String name)
at Microsoft.ReportingServices.Library.ServiceAppDomainController.StartRPCServer(Boolean firstTime)
View 1 Replies
View Related
Jun 8, 2015
I got a problem with my project on reporting services. I installed MS SQL Server 2014 (86x version), Report Builder 3.0 (for creating my reports) and Data Tools for my SQL Server.Now I created a report via Report Builder 3.0 with a SAP NetWeaver as a data source. I could create and view it in Report Builder 3.0.
But when I want to view it on my Report Server it doesn't work. I only get this error."An error has occurred during reporting processing. (Processing Aborted) An attempt has been made to use a data extension 'SAPBW' that is either not registered for this report server or is not supported in this edition of Reporting Services. (rsDataExtensionNotFound)" ...
I found on the internet a few solutions. I installed the Data Tools for the 86x version of the SQL Server. Didn't work. And when I want to change some coding in "RSReportDesigner.config" it says that I'm not allowed to save the changes in this directory.
View 12 Replies
View Related
Jan 16, 2007
I've installed the Developer's edition of SQL05 on my PC at home. I am able to open the reporting services via the Manager Studio and Windows login under my username and password, however I cannot open it in my browser when I enter the
http://computername/reports address. I get a login dialog and enter "computername/myloginID" for the user and my local login password. It will not accept the login and reprompt until I exceed 3 tries.
I also tried logging in with the PC's admin id and password as well as the sa account name and password.
Any ideas on what I missed in the setup or security?
Thanks for any assistance anyone can provide
mike...
View 7 Replies
View Related
Jun 16, 2015
What might be the reason for this error:
A propos above error, traying to open [URL] ....
I am getting this error:
User 'domainuserName' does not have required permissions. Verify that sufficient permissions have been granted and Windows User Account Control (UAC) restrictions have been addressed.
How to proceed with this ?
View 2 Replies
View Related
Apr 22, 2015
I want the header to be visible while scrolling. After changing on the static Properties FixedData=True, it is working on BIDS and Internet Explorer 11 . But is does not work in Chrome. Most of my users are using Chrome. Is there any way to fix it for google Chrome.
View 2 Replies
View Related
Jun 7, 2007
Dear all,
I have a client that has 4 reports; 1 main, and 3 that are rendered when the user clicks the report data on the main report (which passes parameters to generate the other 3).
They would like to have a back button in the report header of the 3 reports (they don't want to use the browser back button).
Is this possible using a text box, then editing the navigation properties and does anyone have an example? Or am I missing something quite obvious?
Any help would be gratefully received!!
Dan
View 6 Replies
View Related
Sep 21, 2015
I have created a custom library(CodeLibrary) which internally references the dlls Microsoft.TeamFoundation.Client and Microsoft.TeamFoundation.WorkItemTracking.Client.
I added this custom Dll codelibrary.dll to my SSRS report. and the expression of one of the field as
=codelibrary.codefunction.GetValue(1000)
codefunction is the class and GetValue is the method.
When I preview the report, I get the error "Error while loading code module:
'CodeLibrary,Version=1.0.0.0,Culture=neutral,PublicKeyToken=null'. Could not load file or assembly 'CodeLibrary,Version1.0.0.0, Culture=neutral,PublicKeyToken=null' or one of its dependencies. The system cannot find the file specified."
I am using VS2013, I have placed the custom library DLL in the path
C:Program FilesMicrosoft Visual Studio 12.0Common7IDEPrivateAssemblies
I have tested the custom library with a WPF application and it works fine.
I am not able to figure out what is causing this error.
View 4 Replies
View Related
Jun 22, 2015
I am facing an issue when report with graph deployed to BI, I can see the misalignment issue in the browser however, when report is run in the Report Builder/SQL Server Data tool or export into PDF then there is no issue.
How to fix the misalignment issue of the graph in the browser. See the both graph below -
Graph Misalignment Issues Screengrab in Browser
Graph without misalignment issue in PDF or Report development tool
I am using the Internet Explorer browser.
View 3 Replies
View Related
Jan 31, 2011
We recently upgraded from ReportViewer 9.0 to 10.0 Control in our ASP.NET application, and face some strange issues after the upgrade. When we press the Back button to go to a page that was rendering a report with one or more single-select drop down lists, the selected index in the drop down is reduced by 1, and the report doesn't render until I press "View Report". I verified that exact same setup works well with ReportViewer 9.0.
View 2 Replies
View Related
Sep 30, 2008
I have designed plenty of reports in VS 2005 and have been deployed on the reporting server. I have been designed one web page which shows UI through which user can access which ever reports he/she wants. I have kept some buttons on UI. When button is clicked appropriate report accessed and displayed on the browser.
Problem is that, report width is about 40 - 50 % of the screen and report viewer shows the report on the left align of the screen. I just want to show the report at the center of the screen. Also, any property I can use to set the report size in the proportion of screen in Percentage(%).
View 6 Replies
View Related
Jan 16, 2007
Hello,
I am trying to print a report in landscape mode from VS 2003 from designer preview or at run time. The users don't want to change a mode manually. I tried to make width 11 or 11.5 in and height 8.5in with zero margins and 0.5in (tried a lot of combinations) - doesn't work! still printing in portrait. Please help! Thank you
View 7 Replies
View Related
Jul 30, 2015
Just upgraded to Windows 10. My SSRS reports, SharePoint 2013 integrated, still work but have no scroll bars. I can use the touchscreen to scroll left and right. Mouse wheel or any other attempts to scroll the report view don't work.
View 4 Replies
View Related
Nov 5, 2007
Hello SQL Server Experts, Data Analysts, and Report Writers et al:
re: Reporting Options with SQL Server
I wanted to propose an offshoot to the pryor thread:
Would anyone take a stab at comparing Access Reports, Crystal Reports,
Cognos or other options to all the Reporting Services and its components offered as part ofSQL Server, especially as to extracting data from SQL Server into a report format?
I guess this is a far as capabilites, ease of use, limitations, and especially formatting
or presentation of the end report product?
Thank you to all, and I hope this is a beneficial discussion to others.
Hal1490
Hal9000
View 4 Replies
View Related
Apr 23, 2015
SSIS package working fine directly.I got following error while execute SSIS package from C# console application.
The connection "{79D920D4-9229-46CA-9018-235B711F04D9}" is not found. This error is thrown by Connections collection when the specific connection element is not found.
Cannot find the connection manager with ID "{79D920D4-9229-46CA-9018-235B711F04D9}" in the connection manager collection due to error code 0xC0010009. That connection manager is needed by "OLE DB Destination.Connections[OleDbConnection]" in the connection manager collection of "OLE DB Destination".
Verify that a connection manager in the connection manager collection, Connections, has been created with that ID.
OLE DB Destination failed validation and returned error code 0xC004800B. One or more component failed validation. There were errors during task validation.
Code :
public static string RunDTSPackage()
{
Package pkg;
Application app;
DTSExecResult pkgResults;
Variables vars;
app = new Application();
pkg = app.LoadPackage(@"D:WORKPackage.dtsx", null);
Microsoft.SqlServer.Dts.Runtime.DTSExecResult results = pkg.Execute();
}
I have recreate the application with again new connection in SSIS. Still not working.
DB : SQL Server 2008 R2
View 6 Replies
View Related
Jul 29, 2015
I know how to size my report to export successfully to A4 portrait PDF and I can position the report in the centre of the browser window BUT I can't do both! I would really like to be able to position it in the centre of my browser window AND be able to print to A4 portrait PDF. If I have the report in the centre (by adjusting the body to take up the whole screen and positioning the report in the centre), it is cut in half when exported to PDF. I can only get it to export to PDF correctly, if the report is aligned to the left of my screen in the browser. Is there a way to move the body to the centre or any other tricks?
View 5 Replies
View Related
Jun 11, 2015
after installing SQL Server 2008 R2 and the Reporting Services, I've managed to access the Report Manager URL....Reports through the web browser on the machine itself. But if i am trying to connect to on my client browser it does not find the Report Server.Do I need to configure the server in any way? Do I need to configure the firewall?
View 2 Replies
View Related
Aug 6, 2015
I have a chart with series that needs conditional colour for three conditions. One condition must be transparent. I have tried the various IFF or SWITCH expressions below and some work fine in SSDT but when I deploy them to the browser the formatting is lost. This simple IFF expression works. The series is transparent as required both in SSDT (Visual Studio BIDS) and IE11 and Firefox browsers but I need two other conditions.
=IIF(Fields!ExhibitionID.Value = -1, "#00ffffff", "Red")
Both of the expressions below work in SSDT (Visual Studio BIDS) as expected but when deployed to the browser none of this formatting is rendered and all series are in blues even the ‘transparent’ series. No red at all.
=IIF(Fields!ExhibitionID.Value = -1,"#00ffffff", IIF(Fields!ExhDepartment.Value = 27,"Orange","Red"))
=Switch(Fields!ExhibitionID.Value
= -1,"#00ffffff",Fields!ExhDepartment.Value = 27,"Orange",(Fields!ExhDepartment.Value <> 27) AND (Fields!ExhibitionID.Value <> -1),"Red")
I have tried deleting various files RDL and DATA. I have tried uploading the file from report manager in IE and I have tried editing the file in report manager.
View 2 Replies
View Related
May 3, 2012
- Which folder from the SQL Media is required to ensure that only Management Studio deploys (we would like to limit the size of the deployment Package)?
- What command line options do we need to use to install the Advanced version of Management Studio with all of the Tools and Books Online. I have found the following but there is not a clear distinction about what is required and what is optional:
[URL]
following command line options for machine that has 2008 R2 Management Studio on it?
Setup.exe /q /ACTION=upgrade /IACCEPTSQLSERVERLICENSETERMS /FEATURES=Tools
- confirm the following command line options for a new installation of 2012 Management Studio?
Setup.exe /q /ACTION=Install /IACCEPTSQLSERVERLICENSETERMS /FEATURES=Tools
- Do I need to use /PID for the product key if I am only installing Management Studio?
View 12 Replies
View Related
Jun 30, 2007
I get the following error message when trying to open the AdventureWordsDB in VBExpress: "Failed to generate a user instance of SQL Server dut to failure in starting the process for the user instance. The connection will be closed." Can someone tell me what the problem is and how to solve it? Thanks, Ray Holt
View 3 Replies
View Related
Aug 29, 2006
Ok so I'm using the Management Studio Express and was able to log in and get into the database server, but I had to click the "options>>" button and change database I wanted to connect to from <<default>> to my database on the server or else I get the "cannot open user database, login failed" error message.Then I right click my database and it gives me the "Cannot open user database. Login failed" error message, even though I already connected to the database to login during the connect screen. Also I'm able to interact with the database using SQL QUERIES in the Management Studio, like adding new tables with it, but if I right click the database and click "add table" I get that error.What gives? I know I have permission since I was able to log on, and modify the database using SQL queries but if use the GUI I can't use it. I can't even right-click select "properties" without getting that error. The reason I want to use the GUI is because I want to right click and use the backup feature of the database.My guess is that Management Studio continues to point to the default database(which gives me that message) after I already logged in, so I have no idea how to change the default database that management studio points to, to the one I do have permission to use. Thanks in advance.
View 1 Replies
View Related
Aug 15, 2005
how do I load this file
View 4 Replies
View Related
