I am getting the above error when trying to add a dataset to my report. Here is my stored procedure below.
USE [HSIU_TEST]
GO
SET ANSI_NULLS ON
GO
SET QUOTED_IDENTIFIER ON
GO
ALTER PROCEDURE [ssrs].[spKEMHWaitTimeCaseList]
[Code] .....
Hi i keep getting this error when i search based on Team name (dropdownlist) or coach name(textbox). However it works when i make the search based on the region id(dropdownlist) here is my stored procedure;ALTER PROCEDURE [dbo].[stream_FindTeam]
-- Add the parameters for the stored procedure here
@coachName varchar(100),
@TeamName varchar(100),@regionID INT
AS
SELECT TeamID, coachName FROM Teams WHERE coachName LIKE @coachName OR TeamName= @TeamNameOR regionID = @regionID;
Here is my code;SqlConnection conn = new SqlConnection(ConfigurationManager.ConnectionStrings["streamConnectionString"].ConnectionString);
conn.Open();SqlCommand command = new SqlCommand("stream_FindTeam", conn);
command.CommandType = CommandType.StoredProcedure;command.Parameters.AddWithValue("@coachName", coachName.Text);
command.Parameters.AddWithValue("@TeamName", TeamList.SelectedValue);command.Parameters.AddWithValue("@regionID", Region.SelectedValue);SqlDataReader reader = command.ExecuteReader(CommandBehavior.CloseConnection);
DataList1.DataSource = reader;
DataList1.DataBind();
conn.Close();
Hi,
I get "Error converting data type nvarchar to int." It is some kind of SQL exception. This is the code in my application.
SqlConnection sqlConnection1 = new SqlConnection(ConfigurationManager.ConnectionStrings["ConnectionString"].ConnectionString);
SqlCommand cmd = new SqlCommand();
Object start;
string activityID = Session["activitygroupID"].ToString();
cmd.Parameters.AddWithValue("@ActivityGroupID", activityID);
cmd.CommandText = "get_startdate";
cmd.CommandType = CommandType.StoredProcedure;
cmd.Connection = sqlConnection1;
sqlConnection1.Open();
SqlDataReader reader = cmd.ExecuteReader(); //The code stops here!!!
start = reader["StartDate"];
sqlConnection1.Close();
The stored procedure on the SQL-server looks like so. StartDate is of DateTime type.
ALTER PROCEDURE [dbo].[get_startdate]
-- Add the parameters for the stored procedure here
@ActivityGroupID int
AS
BEGIN
SELECT StartDate
FROM dbo.CurrentGroup
WHERE ActivityGroupID = @ActivityGroupID
END
I appreciate any help!
I getting the above error can someone please help me solve it, here is the code:
public void InsertHost() { // TODO // - Call stored procedure to write to a log file writeToLog using (SqlConnection cn = new SqlConnection(ConfigurationManager.AppSettings["ConnectionString"])) { SqlCommand cmd = new SqlCommand("writeToLog", cn); cmd.CommandType = CommandType.StoredProcedure; cmd.Parameters.AddWithValue("@pAction", "action"); cmd.Parameters.AddWithValue("@pHostName", "Hostname"); cmd.Parameters.AddWithValue("@pUserNUm", "requestorID"); cn.Open(); cmd.ExecuteNonQuery(); } }
Here is the storedprocedure:
ALTER PROCEDURE dbo.writeToLog(@pAction varchar(10), @pUserNUm bigint, @pHostName varchar(25))AS INSERT INTO dbo.hostNameLog (action, requestorID, HostName)VALUES (@pAction, @pUserNUm, @pHostName)
Here is the table:
HostName - varchar, action - varchar, requestorID - bigint
I can't seem to find the error.
Hi
I have an insert stored procedure with a parameter @eventDate date type date time. I have written a web form that takes the textbox.text value and assigns to the @eventDate parameter using a querystring. Howevr when I run the application I get a SQL Exception error converting data type nvarchar to datetime.
I have tried dssqlInsertEvent.InsertParameters.add("EventDate", convert.todatetime(txtEventDate.text)); wbut received another error.
Any assistance would be greatly appreciated.
I am using MS SQL Server 2008R2 along with VB 2010.The first question is: why is it even trying to convert anything to numeric? I have NO numeric data types. And I don't have any nvarchar data types either. I'm very confused.Doesn't nchar include any and all characters, in any combination? Should I change everything to text data type? Maybe something else? Some values are going to be blank. The Lab/Source Lots have numbers, letters and dashes.
My stored procedure:
ALTER PROCEDURE dbo.MChemsInsert
(
@LabLot nchar(10),
@Chem nchar(50),
@Source nchar(50),
@SourceLot nchar(10),
[code]....
Hi,
I'm pretty desperat after trying solving the above problem in several days. I hope somone here can help me :-)
I have this stored procedure. When I try to Execute the storedprocedure where I have a date as parameter I get the above error.
I checked (many times), that the input parameter is a datetime format (30-05-2008) and also I checked the tabel and it is datetime format. I checked the table to see if it was english datetime format - but all the datetimes that are listet are listed in danish datetime format DD-MM-YYYY.
In the stored procedure I try this:
fProjectSkuTimeStamp >= @ReducedTime
I can't figure out where it gets that nvarchar from?
My stored procedure look like this:
set ANSI_NULLS ON
set QUOTED_IDENTIFIER ON
set NOCOUNT ON
go
ALTER PROCEDURE [dbo].[GetProjectSkuList]
@fProjectFId AS INTEGER = null, --ProjektId
@ReducedTime AS DATETIME --Tidsrum fra
AS
BEGIN
SELECT tProjectSku.fProjectSkuPId, tProjectSku.fCompanyFId, tProjectSku.fProjectFId,
tProjectSku.fProjectSkuDate,
tProjectSku.fOurContactFId, tProjectSku.fOurContactF2Id, tProjectSku.fOrderFId,
tProjectSku.fProjectSkuTimeStamp,
tProjectSku.fProjectSkuNote1, tProjectSku.fProjectSkuNote2, tProjectSku.fContactFId,
tProjectSku.fStoreTransactionsFId,
tProjectSku.fProjectSkuSalesPrice, tCompany.fCompanyName, tProject.fProjectName,
tOurContact.fOurContactFirstName + ' ' + tOurContact.fOurContactLastName AS CreatedBy,
tOurContact_1.fOurContactFirstName + ' ' + tOurContact_1.fOurContactLastName AS Responsible,
tContact.fContactFirstName + ' ' + tContact.fContactLastName AS ContactFullName,
tStoreTransactions.fStoreTransactionsCostPrice,
tStoreTransactions.fStoreTransactionsSerialNo
FROM tOurContact AS tOurContact_1 RIGHT OUTER JOIN
tContact RIGHT OUTER JOIN
tProjectSku LEFT OUTER JOIN
tStoreTransactions ON tProjectSku.fStoreTransactionsFId = tStoreTransactions.fStoreTransactionsPId ON
tContact.fContactPId = tProjectSku.fContactFId LEFT OUTER JOIN
tOrder ON tProjectSku.fOrderFId = tOrder.fOrderPId ON tOurContact_1.fOurContactPId = tProjectSku.fOurContactF2Id LEFT OUTER JOIN
tOurContact ON tProjectSku.fOurContactFId = tOurContact.fOurContactPId LEFT OUTER JOIN
tProject ON tProjectSku.fProjectFId = tProject.fProjectPId LEFT OUTER JOIN
tCompany ON tProjectSku.fCompanyFId = tCompany.fCompanyPId
WHERE
(tProjectSku.fProjectFId = @fProjectFId) AND
--fProjectSkuTimeStamp >= CONVERT(datetime, @ReducedTime, 120)
fProjectSkuTimeStamp >= @ReducedTime
ORDER BY tProjectSku.fProjectSkuPId DESC
END
Kind regards,
simsen :-)
In the following code I want to compare 2 values: AccessVal and SQLVal. The values are stored as nvarchars, so I'm isolating the numeric values in a subquery. Notice I'm only selecting 1 row. The commented line, where I compare the values, is throwing the error.
SELECT QA_AutoID, AccessVal, SQLVal
,ROUND(ABS(CONVERT(float, AccessVal,1)),0) as AccessFloat
,ROUND(ABS(CONVERT(float, SQLVal,1)),0) as SQLFloat
FROM QA
WHERE QA_AutoID in (
SELECT TOP 1 QA_AutoID
FROM QA
WHERE ISNUMERIC(SQLVal) = 1 AND ISNUMERIC(AccessVal) = 1
)
--AND ROUND(ABS(CONVERT(float, AccessVal,1)),0) <> ROUND(ABS(CONVERT(float, SQLVal,1)),0)
ORDER BY ROUND(ABS(CONVERT(float, AccessVal,1)),0) DESC
,ROUND(ABS(CONVERT(float, SQLVal,1)),0) DESC
Here is the output with the comparison commented out...
Here's what I get with the comparison line activated:
I've tried converting to numeric, int and bigint instead of float. I've tried CAST instead of CONVERT. Nothing works.
Hi, all
I'm getting this error at runtime when my page tries to populate a datagrid. Here's the relevant code.
First, the user selects his choice from a dropdownlist, populated with a sqldatasource control on the aspx side:<asp:SqlDataSource ID="sqlDataSourceCompany" runat="server" ConnectionString="<%$ ConnectionStrings:ConnectionString %>"
SelectCommand="SELECT [PayrollCompanyID], [DisplayName] FROM [rsrc_PayrollCompany] ORDER BY [DisplayName]">
</asp:SqlDataSource>
And the dropdown list's code:<asp:DropDownList ID="ddlPayrollCompany" runat="server" AutoPostBack="True" DataSourceID="sqlDataSourcePayrollCompany"
DataTextField="DisplayName" DataValueField="PayrollCompanyID">
</asp:DropDownList>
Then, I use the selectedindexchanged event to bind the data to the datagrid. Here's that code:
1 Sub BindData()
2
3 Dim ds As New DataSet
4 Dim sda As SqlClient.SqlDataAdapter
5 Dim strSQL As String
6 Dim strCon As String
7
8 strSQL = "SELECT [SocialSecurityNumber], [Prefix], [FirstName], [LastName], [HireDate], [PayrollCostPercent], " & _
9 "[Phone], [BadgeNumber], [IsSupervisor], [SupervisorID], [IsUser], [IsScout] FROM [rsrc_Personnel] " & _
10 "WHERE ([PayrollCompanyID] = @PayrollCompanyID)"
11
12 strCon = "Data Source=DATASOURCE;Initial Catalog=DATABASE;User ID=USERID;Password=PASSWORD"
13
14 sda = New SqlClient.SqlDataAdapter(strSQL, strCon)
15
16 sda.SelectCommand.Parameters.Add(New SqlClient.SqlParameter("@PayrollCompanyID", Me.ddlPayrollCompany.SelectedItem.ToString()))
17
18 sda.Fill(ds, "rsrc_Personnel")
19
20 dgPersonnel.DataSource = ds.Tables("rsrc_Personnel")
21 dgPersonnel.DataBind()
22
23 End Sub
24
I'm assuming my problem lies in line 16 of the above code. I've tried SelectedItemIndex, SelectedItemValue too and get errors for those, as well.
What am I missing?
Thanks for anyone's help!
Cappela07
Hi,
I can't seem to fix the following error in my stored procedure.
Error Message: Conversion failed when converting the nvarchar value '1007-001' to data type int.
The line of code in my stored procedure that seems to be the problem is the following:
CASE WHEN [Order Details].[Job No] IS NULL THEN [Orders].[Order No] ELSE [Order Details].[Job No] END
Order No has a data type of INT and Job No has a data type NVARCHAR(8). In the above case statement i'm not trying to convert anything but just display a column depending on the out come of the case statement. If anyone knows how to get around this error you help would be very welcome.
ALTER procedure [dbo].[findConsultantMail]
(
@PerID numeric(18,0),
@perMail nvarchar(100) OUTPUT
)
as
SELECT @perMail=PerMail FROM Personel
WHERE (PerID =@PerID)
return @perMail
I want to get Email address from sql database.
But whenever I executed stored procedure I get an error message
"Conversion failed when converting the nvarchar value 'xxxxxx@xxxxxx' to data type int"
If I want some numeric ID it is worked.
I also change my SP like this but results same.
ALTER procedure [dbo].[findConsultantMail]
(
@PerID nvarchar(18),
@perMail nvarchar(100) OUTPUT
)
as
SELECT @perMail=PerMail FROM Personel
WHERE (PerID =cast(@PerID as numeric(18,0)))
return cast(@perMail as nvarchar(100))
How can I get a string value form stored procedure.
When I run the following sql query:
"update table set price = price * 1.1 "..
I get the following error : "Msg 8115, Level 16, State 8, Line 1.. Arithmetic overflow error converting nvarchar to data type numeric. The statement has been terminated."
The table is set to nvarchar, and i am just trying to make the prices go up 10%.
I am trying to do some amount calculations.
The amount was declared as nvarchar data type.
I did the following coding. I want to get 2 places right of decimal
but am getting only one place right of decimal.
SELECT
(CAST(EQ_TotQuoteAmnt AS Float(7,2)) -
CAST(EQ_InsFee AS Float(7,2)) - 150) as Inforce_Premium
FROM Quoted
Can someone please help me with the syntax?
Thanks in advance.
M. Khan
i am getting this error when passing multiple checkbox values to next page..
Error is Conversion failed when converting the nvarchar value '3,4' to data type int.
my code is below
<asp:SqlDataSource ID="SqlDataSource1" runat="server" ConnectionString="<%$ ConnectionStrings:mobiletimesConnectionString %>"
SelectCommand = "SELECT * FROM [device] WHERE [dev_id] IN (@chk1)">
<SelectParameters>
<asp:FormParameter FormField="chk1" Name="chk1" />
</SelectParameters>
</asp:SqlDataSource><asp:DataList ID="DataList1" runat="server" DataSourceID="SqlDataSource1"
BackColor="White" BorderColor="#CC9966" BorderStyle="None" BorderWidth="1px"
CellPadding="4" GridLines="Both">
<FooterStyle BackColor="#FFFFCC" ForeColor="#330099" />
<ItemStyle BackColor="White" ForeColor="#330099" />
<SelectedItemStyle BackColor="#FFCC66" Font-Bold="True" ForeColor="#663399" />
<HeaderStyle BackColor="#990000" Font-Bold="True" ForeColor="#FFFFCC" />
<ItemTemplate><div class="overviewpdamain" >
<div class="overviewpdadevice">
<center>
<b><%#Eval("dev_name")%></b><br />
<b>
</b>
</center></div>
</div></ItemTemplate>
</asp:DataList>
This is a common error for SQL Server, but I got it in a uncommon way.I have a table called - tblIDNumber where there are two columns - IDN_Number [NVarchar(200)] and Temp [BigInt]
If I run,
SELECT *
FROM dbo.tblIDNumber
WHERE IDN_IDNumberTypeStaticValue = 33
AND IDN_Removed = 0
AND CAST(IDN_Number AS BIGINT) = 1
SQL Server give me the error:
Msg 8114, Level 16, State 5, Line 1
Error converting data type nvarchar to bigint.
I first thought IDN_Number in type 33 has characters, but it doesn't, becasue the below query works!!!
UPDATE dbo.tblIDNumber
SET Temp = CAST(IDN_Number AS BIGINT)
WHERE IDN_IDNumberTypeStaticValue = 33
AND IDN_Removed = 0
To workaround, I ran the query,
UPDATE dbo.tblIDNumber
SET IDN_Number = '123'
WHERE IDN_IDNumberTypeStaticValue = 33
AND IDN_Removed = 0
and then I ran the first query, and SQL Server does NOT give me the same error - Msg 8114, Level 16, State 5, Line 1 Error converting data type nvarchar to bigint.
Second query approved there is nothing wrong from converting the value in IDN_Number to a BigInt, but the third query gave the hint that data might be the cause?????
finally, I found the root cause to be an index that the first query uses :
CREATE NONCLUSTERED INDEX [IX_tblIDNumber_Covering] ON [dbo].[tblIDNumber]
(
[IDN_Removed] ASC,
[IDNumberCode] ASC
)
INCLUDE ( [IDN_Number],
[IDN_Reference]) WITH (PAD_INDEX = OFF, STATISTICS_NORECOMPUTE = OFF, SORT_IN_TEMPDB = OFF, DROP_EXISTING = OFF, ONLINE = OFF, ALLOW_ROW_LOCKS = ON, ALLOW_PAGE_LOCKS = ON, FILLFACTOR = 85) ON [PRIMARY]
GO
If I remove the index, the first query works without the error.
Hi,
I have a webform with a drop-down listbox, binded to a table and a GridView, binded to another table. My goal is when I select a value (country in my case) in the drop-down listbox to change what is shown in the GridView, based on the ID that I get from the drop-down listbox.
Here is the code (the important parts...):
Select a Country : <asp:DropDownList ID="CountriesDropDownList" runat="server" DataSourceID="SqlDataSource2" DataTextField="Name" DataValueField="CountryID" Width="220px" AutoPostBack="True">
</asp:DropDownList>
<asp:SqlDataSource ID="SqlDataSource2" runat="server" ConnectionString="<%$ ConnectionStrings:MyConnectionString %>"
SelectCommand="SELECT [CountryID], [Name] FROM [DS_Country]">
</asp:SqlDataSource>
<asp:GridView ID="ProvincesGridView" runat="server" AllowPaging="True" AllowSorting="True" AutoGenerateColumns="False" DataKeyNames="ProvinceID,CountryID,Name,ShortName,Description" DataSourceID="SqlDataSource1" BackColor="White" BorderColor="#E7E7FF" BorderStyle="None" BorderWidth="1px" CellPadding="3" HorizontalAlign="Left" >
<Columns>
..............................
</Columns>
</asp:GridView>
<asp:SqlDataSource ID="SqlDataSource1" runat="server" ConnectionString="<%$ ConnectionStrings:DineSelectConnectionString %>"
DeleteCommand="DELETE FROM DS_Province WHERE ProvinceID=@ProvinceID"
SelectCommand="SELECT ProvinceID,CountryID,Name,ShortName,Description FROM DS_Province WHERE CountryID=@ddlCountryID"
UpdateCommand="UPDATE DS_Province SET CountryID=@CountryID,Name=@Name,ShortName=@ShortName,Description=@Description WHERE ProvinceID=@ddlCountryID"
InsertCommand="INSERT INTO DS_Province (CountryID,Name,ShortName,Description) VALUES (@CountryID,@Name,@ShortName,@Description)">
<SelectParameters>
<asp:ControlParameter Name="ddlCountryID" ControlID="CountriesDropDownList" PropertyName="DataValueField" />
</SelectParameters>
</asp:SqlDataSource>
When I run it I get this error "Syntax error converting the nvarchar value 'CountryID' to a column of data type int.". If I specify the Type="Int" in <asp:ControlParameter>..</> I get "Input string was not in a correct format. "
This is supposed to be easy, but I can't make it work ! Any suggestions will be more than welcome.
Thanks.
I am using Sql server 2005, Asp.net 2.0. In my application i have to store a mobile number in database, and in table it is declared as nvarchar(50) (datatype). In stored procedure as it is nvarchar(50). In my code , stored procedure is called in a function. In that while executing project error is coming as (cmd.ExecuteNonQuery)
Conversion failed when converting the nvarchar value xxxxxxxxx to data type int.
Kindly give your suggestions to solve this problem.
We have some columns in a table where the date is stored as 19980101 (YYYYMMDD). The data type for this column is NUMBER(8) in Oracle.
I need to copy rows from Oracle to SQL Server using SSIS. I used the Data Conversion transformation editor to change it to DT_DATE, but the rows are not being inserted to the destination.
On Error, If I fail the component, then the error is :
There was an error with input column "ORDER_DATE_CONV" (1191) on input "OLE DB Destination Input" (29). The column status returned was: "Conversion failed because the data value overflowed the specified type.".
Regards
RH
I am using rowVersion to detect rows that need to be re-extracted for my ETL. The first step in the ETL is to get MIN_ACTIVE_ROWVERSION() from the database, as well as the rowVersion from the last successful ETL run. Both of these values are saved in variables in SSIS. Since SSIS doesn't have an associated data type, these values are converted to nvarchar(512) before getting sent to SSIS.
I'm now trying to create a stored procedure to grab the data out of the source system. The sproc takes RowVersionMin and RowVersionMax as input parameters. Those parameters are then converted to varbinary(max), and I use them in a query to select the appropriate rows.
When I run the sproc in SSMS, it runs without a problem. However, when I try to use the sproc as a data source in SSIS, I get the following error: "Error converting data type nvarchar to varbinary". Why SSIS has a problem with this, but SSMS does not? The sproc code looks like this:
ALTER PROCEDURE [dbo].[dw_DimComment_DataLoad]
@RunType varchar(3),
@RowVersionMin nvarchar(512),
@RowVersionMax nvarchar(512)
AS
BEGIN
-- SET NOCOUNT ON added to prevent extra result sets from
[Code] ....
HI Experts...
I am using SQL SERVER 2005 standard edition
I have encountered a problem regarding converting date data type in stored procedure
As i was having problem taking date as input parameter in my stored procedure, so, then I changed to varchar (16) i.e.
CREATE PROCEDURE sp_CalendarCreate
@StDate VARCHAR(16) ,
@EDate VARCHAR(16),
then I am converting varchar to date with following code
DECLARE @STARTDATE DATETIME
DECLARE @ENDDATE DATETIME
SELECT @STARTDATE = CAST(@STDATE AS DATETIME)
SELECT @ENDDATE = CAST(@EDATE AS DATETIME)
When I try to execute the procedure with following code
execute sp_CalendarCreate @stdate='12-1-06',@edate='20-1-06'
but it gives me following error
Msg 242, Level 16, State 3, Procedure sp_CalendarCreate, Line 45
The conversion of a char data type to a datetime data type resulted in an out-of-range datetime value.
Can any one tell me the solution of that problem (at ur earliest)
regards,
Anas
I have a decimal data type column with a record in the following format 20150219 --> yyyyMMdd. And I am trying to convert the return value from SSRS date/time parameter to a decimal value.
The TMDTOP column is the decimal data type with date records in yyyyMMdd format.
My return parameter is the following:
=IIf(IsNothing(Parameters!SystemDate.Value),Fields!TMDTSY.Value,CDec(Format(Parameters!SystemDate.Value,"yyyyMMdd")))
When I try to run the report I get the following error:
Failed to evaluate the FilterValue of the DataSet ‘DataSet1’. (rsFilterEvaluationError)
I am using T-SQL I have a column (ColA)that has datetime format and I simply want to pull the next day but date only into ColB
ColA
3/12/2014 12:00AM
3/19/2014 12:00AM
ColB
3/13/2014
3/20/2014
I have been trying the command below but keep getting the error "Conversion failed when convertint the varchar value '03-03-2014' to data type int."
Convert (varchar(10), "StartDate", 110)+1 as Next Day
I am trying to convert a column (nvarchar) to date time.
Here is an example of some values:
20110905
20110901
20111003
As expected, I received the following error: 'Conversion failed when converting date and/or time from character string.'
However, I am unsure how I should approach updating the whole column. I would like the format to be '103'.
$exception {"Arithmetic overflow error converting expression to data type smalldatetime.
The statement has been terminated."} System.Exception {System.Data.SqlClient.SqlException}
occurs
here is my code
protected void EmailSubmitBtn_Click(object sender, EventArgs e)
{
SqlDataSource NewsletterSqlDataSource = new SqlDataSource();
NewsletterSqlDataSource.ConnectionString = ConfigurationManager.ConnectionStrings["NewsletterConnectionString"].ToString();
//Text version
NewsletterSqlDataSource.InsertCommandType = SqlDataSourceCommandType.Text;
NewsletterSqlDataSource.InsertCommand = "INSERT INTO NewsLetter (EmailAddress, IPAddress, DateTimeStamp) VALUES (@EmailAddress, @IPAddress, @DateTimeStamp)";
//storeprocedure version
//NewsletterSqlDataSource.InsertCommandType = SqlDataSourceCommandType.StoredProcedure;
//NewsletterSqlDataSource.InsertCommand = "EmailInsert";
NewsletterSqlDataSource.InsertParameters.Add("EmailAddress", EmailTb.Text);
NewsletterSqlDataSource.InsertParameters.Add("IPAddress", Request.UserHostAddress.ToString());
NewsletterSqlDataSource.InsertParameters.Add("DateTimeStamp", DateTime.Now.ToString());
int rowsAffected = 0;
try
{
rowsAffected = NewsletterSqlDataSource.Insert();
}
catch (Exception ex)
{
Server.Transfer("NewsletterProblem.aspx");
}
finally
{
NewsletterSqlDataSource = null;
}
if (rowsAffected != 1)
{
Server.Transfer("NewsletterProblem.aspx");
}
else
{
Server.Transfer("NewsletterSuccess.aspx");
}
I am trying to create a page that adds users to a MS SQL database. In doing so, I have run into a couple errors that I can't seem to get past. I am hoping that I could get some assistance with them.
Error from SQL Debug:
---
Server: Msg 295, Level 16, State 3, Procedure AdminAddUser, Line 65
[Microsoft][ODBC SQL Server Driver][SQL Server]Syntax error converting character string to smalldatetime data type.
---
Error from page execution:
---
Exception Details: System.Data.OleDb.OleDbException: Error converting data type varchar to numeric.
Source Error:
Line 77: cmd.Parameters.Add( "@zip", OleDbType.VarChar, 100 ).Value = Request.Form("userZip")
Line 78:
Line 79: cmd.ExecuteNonQuery()
---
Below is what I currently have for my stored procedure and the pertinent code from the page itself.
Stored Procedure:
---
CREATE PROCEDURE dbo.AdminAddUser( @username varchar(100),
@password varchar(100),
@email varchar(100),
@acct_type varchar(100),
@realname varchar(100),
@billname varchar(100),
@addr1 varchar(100),
@addr2 varchar(100),
@city varchar(100),
@state varchar(100),
@country varchar(100),
@zip varchar(100),
@memo varchar(100) )
AS
BEGIN TRAN
--
-- Returns 1 if successful
-- 2 if username already exists
-- 0 if there was an error adding the user
--
SET NOCOUNT ON
DECLARE @error int, @rowcount int
--
-- Make sure that there isn't already a user with this username
--
SELECT userID
FROM users
WHERE username=@username
SELECT @error = @@ERROR, @rowcount = @@ROWCOUNT
IF @error <> 0 OR @rowcount > 0 BEGIN
ROLLBACK TRAN
RETURN 2
END
--
-- Set expiration date
--
DECLARE @expDate AS smalldatetime
IF @acct_type = "new_1yr" BEGIN
SET @expDate = DATEADD( yyyy, 1, GETDATE() )
END
IF @acct_type = "new_life" BEGIN
SET @expDate = DATEADD( yyyy, 40, GETDATE() )
END
DECLARE @paidCopies AS decimal
SET @paidCopies = 5
--
-- Add this user to the database
--
IF @acct_type <> "new" BEGIN
INSERT INTO users (userName, userPassword, userEmail, userJoinDate,
userPaidCopies, userExpirationDate, userLastPaidDate,
userBname, userRealName, userAddr1, userAddr2, userCity,
userState, userCountry, userZip, userMemo )
VALUES (@username, @password, @email, GETDATE(), @realname, @billname,
@paidCopies, @expDate, GETDATE(), @addr1, @addr2, @city, @state, @country, @zip, @memo )
SELECT @error = @@ERROR, @rowcount = @@ROWCOUNT
IF @error <> 0 OR @rowcount < 1 BEGIN
ROLLBACK TRAN
RETURN 0
END
END
IF @acct_type = "new" BEGIN
INSERT INTO users (userName, userPassword, userEmail, userJoinDate,
userBname, userRealName, userAddr1, userAddr2, userCity,
userState, userCountry, userZip, userMemo )
VALUES (@username, @password, @email, GETDATE(), @realname, @billname,
@addr1, @addr2, @city, @state, @country, @zip, @memo )
SELECT @error = @@ERROR, @rowcount = @@ROWCOUNT
IF @error <> 0 OR @rowcount < 1 BEGIN
ROLLBACK TRAN
RETURN 0
END
END
COMMIT TRAN
RETURN 1
GO
---
Page Code:
---
Sub AddUser(Sender as Object, e as EventArgs)
Dim db_conn_str As String
Dim db_conn As OleDbConnection
Dim resultAs Int32
Dim cmdAs OleDbCommand
db_conn_str = "Provider=SQLOLEDB;Data Source=localhost;Initial Catalog=xxxxx; User ID=xxxxx; PWD=xxxxx;"
db_conn = New OleDbConnection( db_conn_str )
db_conn.Open()
cmd = new OleDbCommand( "AdminAddUser", db_conn )
cmd.CommandType = CommandType.StoredProcedure
cmd.Parameters.Add( "result", OleDbType.Integer ).Direction = ParameterDirection.ReturnValue
cmd.Parameters.Add( "@username", OleDbType.VarChar, 100 ).Value = Request.Form("userName")
cmd.Parameters.Add( "@password", OleDbType.VarChar, 100 ).Value = Request.Form("userPass")
cmd.Parameters.Add( "@email", OleDbType.VarChar, 100 ).Value = Request.Form("userEmail")
cmd.Parameters.Add( "@acct_type", OleDbType.VarChar, 100 ).Value = Request.Form("userEmail")
cmd.Parameters.Add( "@realname", OleDbType.VarChar, 100 ).Value = Request.Form("userRealName")
cmd.Parameters.Add( "@billname", OleDbType.VarChar, 100 ).Value = Request.Form("userBname")
cmd.Parameters.Add( "@addr1", OleDbType.VarChar, 100 ).Value = Request.Form("userAddr1")
cmd.Parameters.Add( "@addr2", OleDbType.VarChar, 100 ).Value = Request.Form("userAddr2")
cmd.Parameters.Add( "@city", OleDbType.VarChar, 100 ).Value = Request.Form("userCity")
cmd.Parameters.Add( "@state", OleDbType.VarChar, 100 ).Value = Request.Form("userState")
cmd.Parameters.Add( "@country", OleDbType.VarChar, 100 ).Value = Request.Form("userCountry")
cmd.Parameters.Add( "@memo", OleDbType.VarChar, 100 ).Value = Request.Form("userMemo")
cmd.Parameters.Add( "@zip", OleDbType.VarChar, 100 ).Value = Request.Form("userZip")
cmd.ExecuteNonQuery()
(...)
---
All source and target date fields are defined as data type "smalldatetime". The "select" executes without error though when used with "insert into" it fails with the error:
Msg 295, Level 16, State 3, Line 25: Conversion failed when converting character string to small date-time data type..I am converting from a character string to smalldatetime since the source and target date columns are "smalldatetime". All other columns for the source and target are nvarchar(255). I assume there is an implicit conversion that I don't understand. In a test, I validated that all dates selected evaluate ISDATE() to 1.
USE [SCIR_DataMart_FromProd_06_20_2014]
GO
IF OBJECT_ID ('[SCIR_DataMart_FromProd_06_20_2014].[dbo].[IdentifierLookup]', 'U') IS NOT NULL
DROP TABLE [SCIR_DataMart_FromProd_06_20_2014].[dbo].[IdentifierLookup]
[code]....
can anyone see as to why I would get this error with the following SP?
ALTER PROCEDURE [dbo].[SP]
@ID int = 0,
@emailFrom VARCHAR(50) = Null,
@emailDate VARCHAR(50) = Null,
@emailSubj VARCHAR(50) = Null,
@emailTxtBody VARCHAR(1000) = Null,
@emailHtmlBody VARCHAR(1000) = Null
AS
-- SET NOCOUNT ON added to prevent extra result sets from
-- interfering with SELECT statements.
SET NOCOUNT ON;
DECLARE @Notes VARCHAR (8000)
DECLARE @TicketID INT
DECLARE @emailBody VARCHAR (1000)
DECLARE @Length Int
SET @Notes = ''
SET @Length = LEN(@emailSubj)
-- insert a new entry
INSERT INTO PopEmail
( emailFrom, emailDate, emailSubj, emailTxtBody, emailHtmlBody )
VALUES
( @emailFrom, @emailDate, @emailSubj, @emailTxtBody, @emailHtmlBody )
-- get the new ID
SET @ID = @@identity
If ( @ID <> 0 ) AND ( ISNUMERIC(@emailSubj) = 1 )
Begin
IF @emailTxtBody IS NULL
BEGIN
Set @emailBody = @emailHtmlBody
PRINT '@emailHtmlBody: ' + @emailBody
END
ELSE
BEGIN
SET @emailBody = @emailTxtBody
PRINT '@emailTxtBody: ' + @emailBody
END
SET @TicketID = CAST( @emailSubj AS int )
SET @Notes = @emailFrom + ', ' + @emailDate + ', ' + @emailBody
Select @ID = ID From TicketDetails Where TicketDetails.TicketID = @TicketID
Exec differentSP @ID, @TicketID, @Notes
PRINT 'Subject: [' + @emailSubj + ']'
print 'length: ' + CAST(@Length as varchar (10))
Print 'emailSubj: ' + CAST( @emailSubj AS int )
PRINT 'ID: ' + Cast( @ID as varchar ( 10 ) )
PRINT 'TicketID: ' + Cast( @TicketID AS Varchar ( 10 ) )
PRINT 'Notes: ' + @Notes
PRINT 'ID: ' + Cast( @ID as varchar ( 10 ) )
END
ELSE
BEGIN
Print 'ID: ' + CAST(@ID AS VarChar(10))
PRINT 'ISNUMERIC: ' + CAST(ISNUMERIC(@emailSubj) AS VarChar (10))
PRINT 'Subject: [' + @emailSubj + ']'
END
I have a table with a column (locationID) of int data type, I want to pass a list of locationID's to a stored procedure using the IN operator (e.g. WHERE LocationID IN (list of locationID's)). What can I do to achieve this????
My stored procedure looks like this:
CREATE PROCEDURE [sp_test]
@sLocIDs varchar(30)
AS
select count(distinct TimeZoneID) As timezones,
from dimLocation
WHERE LocationID IN (@sLocIDs)
When I test it:
exec sp_test
@sLocIDs = '1,2,10'
I get "Error converting data type varchar to int"
I have a table with one of the column(EmpHiredate) datatype is char(10). It has value like "20141023". I need to display this value as date format(dd/mm/yyyy) in report. Following methods i tried in textbox expression but no luck.
=Format(Fields!EmpHireDate.Value,"dd/MM/yyyy")
=Cdate(Fields!EmpHireDate.Value)
Error:[rsRuntimeErrorInExpression] The Value expression for the textrun ‘EmpHireDate.Paragraphs[0].TextRuns[0]’ contains an error: Conversion from string "20041023 " to type 'Date' is not valid.
Is it possible to convert string to date using SSRS textbox expression ?
When I execute the below stored procedure I get the error that "Arithmetic overflow error converting expression to data type int".
USE [FileSharing]
GO
/****** Object: StoredProcedure [dbo].[xlaAFSsp_reports] Script Date: 24.07.2015 17:04:10 ******/
SET ANSI_NULLS ON
GO
SET QUOTED_IDENTIFIER ON
GO
[Code] .....
Msg 8115, Level 16, State 2, Procedure xlaAFSsp_reports, Line 25
Arithmetic overflow error converting expression to data type int.
The statement has been terminated.
(1 row(s) affected)
Hi There,
I'm using C# to get a value for a DOUBLE precision variable, called "Length", from a textBox using the following line:
Length = Convert.ToDouble( txtLength.Text )
I'm also using the following lines to prepare my stored procedure call:
arParms[9] = new SqlParameter("@Length", SqlDbType.Decimal, 5);
arParms[9].Value = record.Length;
My stored procedure has the following parameter definition:
@Length decimal(9,3)
My problem is that if someone types a value bigger than 999999 in the textbox he will get for sure the following error:
System.Data.SqlClient.SqlException: Error converting data type numeric to decimal.
I don't know how to either make sql or C# to truncate the value or catch the exception to automatically assign 0 to the parameter.
Please Help.
Moshe
I am using a stored procedure which returns a value of charecter datatype 'V' to the calling program.I am getting an sql exception System.Data.SqlClient.SqlException: Syntax error converting the varchar value 'V' to a column of data type inti didnot define any int datatype in my tablethis is my codeSqlCommand com = new SqlCommand("StoredProcedure4", connection);com.CommandType = CommandType.StoredProcedure; SqlParameter p1 = com.Parameters.Add("@uname", SqlDbType.NVarChar);SqlParameter p2 = com.Parameters.Add("@opwd", SqlDbType.NVarChar);SqlParameter p3 = com.Parameters.Add("@role", SqlDbType.NVarChar);p3.Direction = ParameterDirection.ReturnValue;p1.Value = username.Text.Trim();p2.Value = password.Text.Trim();com.ExecuteReader();lblerror2.Text = (string)(com.Parameters["@role"].Value); can your figure out what is the error ? Is it a coding error or error of the databse
View 3 Replies View RelatedI copying data from our Informix 7.2 database into SQL Server 2K using DTS but hitting errors during the process. There appears to be date data within Informix that will not convert properly when moving into SQL. Since the error is appearing at the 1.5million (approx.) record. I figured on changing from datetime to nvarchar. Works like a charm! :-)
My new problem is converting it back to datetime so I can query against the date without having to create scripts to parse the field.
The data in SQL currently looks like this -> 2000-11-29 (nvarchar(50))
I would like to have it -> 11/29/00 (datetime)
Any help is greatly appreciated!
JT
The goodness we share is rewarded twice!