Reporting Services :: Error When Exporting Report With Multiple Subreports To PDF
Oct 23, 2015
I have a report in SSRS 2008 R2 that has multiple subreports, in fact the report uses the same subreport twice with different parameters. Then that subreport also has a subreport, which has a subreport. (It's a complex data scenario with a hierarchy that can go up to three layers deep.) The report renders fine in report viewer, but when I try to export to PDF I get the following error:
Object reference not set to an instance of an object.
Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code.
Exception Details: Microsoft.Reporting.WebForms.ReportServerException: Object reference not set to an instance of an object.
Source Error: An unhandled exception was generated during the execution of the current web request. Information regarding the origin and location of the exception can be identified using the exception stack trace below.
[Code] ....
Each subreport renders correctly to PDF, and if I remove either subreport from the main report, it also renders correctly. But the two subreports together on the report cause the error.
Removing the third hierarchy layer (the final one) fixes the issue. Is there a limit to the number of nested subreports when rendering to a pdf?
I got a error when exporting to excel one report that has a table and in a column it has a subreport.
Is this possible to do?
What is the work around?
The error that i got it is the following.
Server Error in '/Reports' Application. --------------------------------------------------------------------------------
For more information about this error navigate to the report server on the local server machine, or enable remote errors Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code.
Exception Details: System.Exception: For more information about this error navigate to the report server on the local server machine, or enable remote errors
Source Error:
An unhandled exception was generated during the execution of the current web request. Information regarding the origin and location of the exception can be identified using the exception stack trace below.
Stack Trace:
[Exception: For more information about this error navigate to the report server on the local server machine, or enable remote errors]
I need to export around 1 million records to excel. As we know that there is a limit of approx 65,000 rows in one worksheet so the exporting functionality is failing. One way is that I should be able to configure the Reporting Service in such a way so that once 65,000 records gets populated in the first worksheet, then the rest 35,000 records gets popultaed in the second worksheet.
I am not able to find out how this can be achieved in Reporting Services. Please help me in this.
I am using SSRS 2008 R2 and have a report set up on a subscription to be exported to a .TXT file and placed in a network drive folder. The report generates as it should and is placed in the network folder as it should and the file format is .TXT. However, when the text file is uploaded to an ftp site, the results of the very first record within the system the file is uploaded to, has 3 weird leading characters.
But the rest of the records are imported perfectly, as they should be. The system that the file is being uploaded into is not our system, it is a system at a USA Today Newspaper office and is an IBM iSeries server with the programming language of LANSA (Never heard of it).
I have edited the report server configuration file to give the ability to export the report to a .TXT file format and I have included the code snippet on here. Maybe I have missed something, not sure. I have also included the screenshot of the file upload results that were sent to me by USA Today. Is there anything I can do to get those 3 characters to not show up in the first record?
I tried to export a reort using SQL 2005 Reporting Services. However Iam getting the following log on the screen : [logs After upgrading the SQL 2005 with SP2 ]
Execution 'ssem4cntbzve525531im5aup' cannot be found (rsExecutionNotFound) Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code.
Exception Details: Microsoft.Reporting.WebForms.ReportServerException: Execution 'ssem4cntbzve525531im5aup' cannot be found (rsExecutionNotFound)
Source Error:
An unhandled exception was generated during the execution of the current web request. Information regarding the origin and location of the exception can be identified using the exception stack trace below.
I have one SSRS report which uses drill down "+" approach. The records will be opening only when you click on the "+" sign. There are 3 levels of "+" sign in the report. All records are included when exporting to excel. Is it possible to exclude all the records? Can we show only the opened records.?
Most of our reports need to be rendered directly to PDF. And since we have multi paged reports, we have implemented document map to have navigation. while exporting to the PDF, Users want the Bookmarks to be visible by default. However, this is not the case. The bookmarks tab in the Navigation tools of Acrobat is not expanded rather we need to manually click on it to see the bookmarks. This behavior is different from Crystal Reports XIr2 where the bookmarks are defaulted to be visible when opening a PDF exported by crystal.Is there any way to replicate this behavior in SSRS too?
I am getting extra column while exporting SSRS report into excel but those columns not in my report. How to avoid these columns please find the attached screen shot with red circle.
I have a report with three subreport, i want to hide data of subreport while exporting reporting in to excel. I have used this function (=IFF Globals! Render foramt.IsInteractive,False,True) but didnt work.
I have a drill down report which need to be exported to excel. But, when exporting to excel it shows many unwanted blank rows for a particular record due to the drill down option.
Is it possible to remove it?
I need to exclude the rows in yellow color when exporting to excel.
I am in the process of creating a Report, and in this, i need ONLY the row groups (Parents and Child).I have a Parent group field called "Dept", and its corresponding field is MacID.I cannot create a child group or Column group (because that's not what i want).I am then inserting rows below MacID, and then i toggle the other rows to MacID and MacID to Dept.
The goal is to produce a single PDF consisting of a number of subreports. Some are landscape, others are portrait. The subreports may also be run as independent reports. The master report that contains them defaults to the width of the widest subreport, which is landscape. This causes all portrait subreports to spill over producing blank pages. Are there any work-arounds to concatenate multiple, single report PDFs into a single PDF and have page numbering too?
strange behaviour in our production environment, while in the test servers all goes ok:
web application with web report viewer, the report is fine but clicking on "preview" or "print" an error 0x800C008 occurs.
The report include 3 subreports, and here's the problem: after some attempts i realized that each subreport (alone in the master report) works fine, but more than 1 in the same master report produces the error!
w3wp!library!7!04/17/2007-11:23:55:: e ERROR: Throwing Microsoft.ReportingServices.Diagnostics.Utilities.InternalCatalogException: Errore interno nel server di report. Per ulteriori informazioni, vedere il log degli errori., un-named assertion fired for component processing; Info: Microsoft.ReportingServices.Diagnostics.Utilities.InternalCatalogException: Errore interno nel server di report. Per ulteriori informazioni, vedere il log degli errori.
I want to use 2 stored procedures in one report, but I could not find what is the way of doing this. I searched this subject on the intrernet, and I found some solutions. However, they used stored procedures in one stored procedure and used in one report. This is not the thing which I want to do, I want only do using 2 stored procedures in one report at the same time.
I Have an SSRS report which shows questions and answers pulled from a view tables.I have 3 rows: Row 1 shows questions and answers 1 - 128, row 2 shows questions and answers 128 to 248 and row 3 shows 248 onwards.I only want the row with the correct questions and answers to show.So am using this query for example:
=IIf((Fields!vQuestions_Question_ID.Value < 128 Or Fields!vQuestions_Question_ID.Value > 247) AND (Fields!vQuestions_Response_value.Value < 128 Or Fields!vQuestions_Response_value.Value > 247), False, True)
which fails.If I only use= IIf(Fields!vQuestions_Question_ID.Value < 128 Or Fields!vQuestions_Question_ID.Value > 247, False, True) this works.What is the correct syntax for the multiple IIfs as i want both the criteria in the first query satisfied?
I have a report that uses several filters including a from and to date filter, I have a field named TimeLastMod which is a Timestamp. I am extracting the From and To dates from this field using Select format(TimeLastMod,'MMM') as FromMonth,format(TimeLastMod,'MMM') as ToMonth From Eventlogs syntax.
These I pass on to a parameter and eventually to a tablix filter in an between opeartion. When I run the report, the records returned by the report is not what is expected as it sometimes returns an extra months data e.g., using between Aug and Sept will return october data as well.
I would like to know how does subreport accept multi value, and how should i modify my expression so that the sub report will display correctly.
My main report will pass dynamic number of account number to sub report, it depends on how many account number a person has. I have my sub report parameter Data Type set as "Allow multiple values" and the visibility is "Visible".
Currently, I am using the following expression to try to pass multi value from main report to sub report. I had tested the result of that expression. It is showing the following result when there are 3 account numbers to pass to sub report.
1534896 1563498 1593548
With that expression, when only one account no is pass from main report to sub report, the sub report will display the result. But when more than one account numbers are passing over, the sub report display nothing, it is blank.
*Note: I cannot put the account number into a multivalue parameter in the main report and pass from that parameter to sub report. I know this will workd BUT I had tried that by setting the default value in the multivalue parameter to the dataset that consists of the account number. That involves 100 thousand plus plus account numbers and it will for sure over the limit of 8000 characters.
I have a report with 2 tablixes, both the tablixes can be hidden based on the parameter selection. The 1st tablix has a drill through action on one of the columns, that calls the 2nd tablix in the SAME report. Once you click on the drill through, the 1st tablix is no longer visible, only the 2nd one is.
The report is working fine, until you export it to CSV file. Once you are on the 2nd tablix (1st one is NOT visible at this time in the report), and then when you export it to CSV, BOTH, the 1st tablix as well as 2nd tablix are visible in the CSV file. Why does the 1st tablix come up in CSV IF you just exported 2nd tablix to CSV?
Is there a workaround to NOT show the parent/1st tablix at all if the 2nd tablix is exported? Excel works fine!I know sub-reports instead of multiple tablixes might solve this issue.
Is it possible to have different chart (having their dataset from same shared datasets) like six on one report, then secondly can they all respond to same parameter filter.
I have used my parameter value in where clause of my dataset control SQL query. When I choose a single value in my multiple-value parameter then I get output as expected. Hovewer when I choose multuple values I get an arror:
Only one expression can be specified in the select list when the subquery is not introduced with EXISTS. ---------------------------- Query execution failed for dataset 'DATABASE'. (rsErrorExecutingCommand) ---------------------------- An error has occurred during report processing. (rsProcessingAborted)
I am convinced that it's a syntax problem. Is there a way I can change syntax of data output from query:
select @parameter
I need output to be like: value, value, value ... etc.
The dataset control query looks something like the following:
select ID, a, b, c, d from DATASET.dbo.Table where ID in (select @parameter)
I have been searching through google for weeks to solve this and got this far and got stuck. Is it possible at all to achieve what I am looking for?
I have a report designed in RB3 that uses a data source from a SQL database that is on the report server. I want to add data to the report from an access database an a network drive.
I can add the second data source and create a data set to add data to the report. The dataset query returns data from the Access database but when I run the report I get the following error.
An error has occurred during report processing. (rsProcessingAborted)
Cannot create a connection to data source 'Feasibility'. (rsError OpeningConnection)
Also when I test the connection to the Access data base I get error ERROR (IM002) (Microsoft)(ODBC Driver Manger) Data source name not found and no default driver specified.
I noticed that Report Builder is connecting to the report server. If I disconnect from the report server I can a can connect to the Access data base but not the SQL database.
How can I get the report to run against both data sources?
I'm using Reporting Services 2005 SP1 and wrote some code to render reports server-side. My sample report has few parameters that must be passed so I pass these parameters with code.
byte[] report = rs.Render("PDF", "<DeviceInfo><Toolbar>False</Toolbar></DeviceInfo>", out extension, out mimeType, out encoding, out warnings, out streamID); </My code>
Actually, I have several more parameters but I've checked the collection and all the parameters I want are there and have values. Their names match those found in executionInfo.Parameters. But when I run my code I get the following error on Render():
<Error> "This report requires a default or user-defined value for the report parameter 'pClass'. To run or subscribe to this report, you must provide a parameter value. ---> This report requires a default or user-defined value for the report parameter 'pClass'. To run or subscribe to this report, you must provide a parameter value. ---> This report requires a default or user-defined value for the report parameter 'pClass'. To run or subscribe to this report, you must provide a parameter value." </Error>
I've double-checked and my parameter array does have the problematic parameter, I passed it a value but when I check executionInfo.Parameters I see that it's the only parameter that hasn't been give a default value after calling SetExecutionParameters(). So my parameters do seem to be passed but one seems to refuse getting a value. If I comment out the SetExecutionParameters() line I get, as expected a similar error but on another parameter (first one in the executionInfo.Parameters collection). So I'm left to beleive that the SetExecutionParameters() has some kind of bug as it works for all but one parameter. I've checked casing, spelling, tried passing phony parameters and from what I've seen I should be getting an error when I pass the parameters if I got something wrong.
I am creating a SSRS report using a SSAS cube as it data source. The user would like to select multiple values from a reporting parameter that is then used as a filter on the MDX statement. I am bale to have the report work successfully when only one value is selected but not when multiple values are selected; the report uses only the first value from the reporting parameter when it contains multiple values. How do I filter an MDX query using a SSRS report parameter with multiple values?
I have a report that groups a particular dataset by customer, with a page break between each customer. If print this report, it looks great - one page per customer.
What I would like to do is have the report deployed on schedule to a windows file share, one .pdf file per customer. How to parse the output into individual .pdfs (one per customer) instead of a single .pdf containing all customers? I get it if this is not possible.
My current (painful) workaround would be to replicate the report for each potential customer, and set a schedule for each report to deploy sequentially. (Customer 1 at 9:00, Customer 2 at 9:01, etc).
My report has two data sets that hold inventory from two different departments.
ds_DeptA and ds_DeptB
I have a table, that pulls the DeptB status of DeptA record and displays it. This returns empty when the lookup fails to make a match, which is fine. Typically means DeptB does not have the record yet. I need to count these empty (null) feilds and populate it in a Text box outside of the table.
I just can't figure out the syntax with multiple datasets. I can't use the lookup expression as part of the count expression since the count expression is not contained in a table that has a dataset.
table: ds_DeptA fields: ID Name date_set_to_DeptB <<Expr>> =Lookup(Fields!ID.Value,Fields!DeptA_ID.Value,Fields!DeptB_Status.Value, "ds_DeptB")
So I get the basics, have a script that can deploy a single report to a single server. I have other simple scripts that work as well. Now I want a script that can deploy a single report to multiple Sharepoint servers. I have about 30. I know we are probably doing this wrong, as in, we shouldn't be deploying the same report to 30 sites, as they are all all technically all on the same server however they are all independent site collections so as far as I know there is no way to deploy them to a central location and then link to them from each site.
So I tried to copy elements of my single report deploy script and duplicate the Sub Main() to Sub Main1() and Sub Main2() with multiple "ParentPath1" dims, yes I know I'm stupid. That obviously didn't work. So looking at some other scripts including my own subscription updater and I'm sure I need to do some kind of "For Each item in X" but where to start. The other lists I've seen all come from rs.Something. My list is just 30 variables in the script, how can I say for each site in this list, Publish this report?
Here's the simple script that works fine. I just don't know how to modify it to make it deploy this to multiple sites. After I figure that out, I was going to accept the challenge of deploying multiple reports to multiple sites in a single script...
Dim warnings As Warning() = Nothing Dim parentFolder As String = "Reports" Dim filePath As String = "filepath" Dim reportName As String = "Report file name" Dim parentPath As String = "Sharepoint site URL" Public Sub Main()
I have done this several times before but somehow unable to make it work this time around.
select ast.AssetId, fu.ParentDescription from dbo.asset ast inner join tblPatchViaFU FU ON ast.AssetId = fu.Assetid where fu.ParentFUId IN (@IMO)
In tblPatchViaFU table column [ParentFUid] is int datatype
***** Dataset for Parameter "IMO" ******
SELECT DISTINCT ParentFUId ParentFUId , ParentDescription IMOfficer FROM [dbo].[tblPatchViaFU] WHERE ParentName = 'Income Patch'
***** @IMO Parameter ******
Datatype : Integer Allow multiple values
Available Values Dataset : IMO Value Field : ParentFUId Label Field : IMOfficer
The report runs perfectly fine for 1 parameter value but the moment I select more than one it fails with the error message "Error converting data type nvarchar to int."
I have created a project using MVC 4 application.i have created a dataset model and .rdlc file using report viewer but i'm getting the following error when i run it.
Is it possile for a report to be exported to multiple PDF files, each pdf file would be for a group in the report and would ideally use field information for the group to construct the pdf filename?
The purpose of this is to provide a separate PDF for access over the web, so for example we have a scheduled report that generates a report grouped by sales region we would end up with SalesRegionA.PDF, SalesRegionB.PDF etc.
For a week now, I have been reading every fix I can find for the infamous Reporting Services error(s) and none of the fixes have worked for me. I have checked permissions and memberships of the reporting services groups, removed xmlns as mentioned, made sure that the Classic App Pool was being used, started, stopped, reinstalled, made sure the RSWebApplication.config had the URL or not, either way nothing is working for me.
Is there some place where all of the various fixes are consolidated? Can anyone help me? I'm dying over here. It worked on a previous image and I rebuilt it and can't get it to work. I have SQL 2005 sp2 on Vista...all of the IIS requirements are met and the RS configuration utility reports that everything is fine.
