I am designing a bar chart in which five value comes .if all values comes then graph is working fine but my concern is when i have single value then in that case bar gets created on the middle of chart i want to generate the single bar on bottom of the chart.
View 5 Replies
Hello All,
I have a reporting services report in the form of a chart. I have two datafields on the chart.
I need to be able to dynamically hide one datafield and view the chart for the other one and vice versa.
How do I do this ?
Any help would be appreciated..
Thanks!
When I export the report in excel format the chart is displayed as picture. I want it to be displayed as editable chart.Does Office Writer work in this situation and did anyone use Office Writer to accomplish same type of problem.Is there any other method or product we can use instead of the office writer.
View 2 Replies View RelatedI have a report designed in SSRS 2008 R2.My issue is that the data labels do not stay outside the bars for high values.
View 4 Replies View RelatedI need to create a chart with the following features
1) Bar chart that has data for 3 years (3 series)
2) Line chart that has the same data as per the above points on the bar chart but this is a running total. (3 series)
3) These data points are for the 12 months
4) there should be a secondary axis for the cumulative one
Can I create this using the same data set?
I have to display Top 5 values in 'Green' and Bottom 5 in 'Red' out of some data.
Ex: my data is as below
ID Marks
1 98
2 62
3 89
4 97
5 92
6 67
[Code] ....
Expected result is : if the marks are >= 80 then 'Green' (pick only top 5) if marks are <= 70 then 'Red' (pick bottom 5) else 'Black'
As per my data even though we have values >=80 for more than 5 students display only top 5 in Green and same rule applies for Bottom 5 that means
ID 's : 1 ,3 , 4 , 5, 9 and their marks in Green (pick only Top 5 ) even though we have 6 students who got >=80
ID's : 2 , 6, 16 , 15 and their marks in Red (Bottom 5 but we have only 4 students who got <=70 )
Report in question is an invoice form. It requires an absolutely bottom-of-page aligned footer that has databound elements. This is so that whatever page that footer finally appears on will print in such a way that the address will align in a windowed envelope. Ironically, Books Online gives this exact scenario in explaining headers and footers in SSRS, but they cleverly don't explain how an absolutely bottom-of-page-aligned and data-bound footer can be made to happen. Headers at absolute page top is obviously no problem. Footers at page bottom, not so much.So, this is not a "page footer"--page footers are employed in the body. Also this footer is databound, so a page footer as it's known in SSRS is out the window anyway.
Most of the time this will print on a single page, but if it breaks to multiple pages, that footer needs to go all the way to the absolute bottom.I grasp that the "report footer" for SSRS is just what appears at the end of any repeating controls that you've implemented in your body. Because SSRS uses this kind of repeating-control based idiom rather than a section-based idiom as Crystal does, this kind of (what I would consider very basic) positioning control is looking fairly impossible right now.Among what I've tried:
--Page footer (can't; databound)
--Specifying a page break after the pre-footer controls, and/or a page break before the controls that make up the footer in their properties. This leads to unpredictable results with blank printed pages (as many as 8 for what previews as a 2-page report, how silly is that?).
--Putting in a page-height rectangle as part of the footer (with and without the page breaks mentioned above), with the idea of forcing a basically blank page at the end of the report so that the footer will go to the bottom. SSRS will go ahead and break the page anyway on long elements like that, which again leads to the "footer" being printed in the middle or top of the final page, or whereever it happens to fall.
I may be having to explain to my client that you can't get there from here, and they may have to redesign their report.
There is a huge empty space between my tablix which is inside a rectangle to the footer.
I need to be able to fit another row but the other rows go on to the second page. How can I fix this?
We have the customer requirement to display the footer of a SSRS Report fixed at the absolute bottom of a DIN A4 format page. The footer contains information like company address and stuff.
I searched quite a while on this topic and only found workarounds for SQL Server 2005 with Custom Code in the SSRS Report to calculate the size of the body content and then insert some empty lines to get the space needed to push the footer to the bottom of the page. But this won't work in SQL Server 2012. And I wasn't able to figure out how to achieve this yet.
hey all
I am using RS 2005
I have a report with chart
parameters = value1, value2, value3, all
How can I make the chart only show when all is selected?
cheers
jewel
Hi all,
Hopefully someone can clarify for me. I'd like to use custom colors for a chart that I have created. I've seen some code examples but I'm not really sure what to do with them. I've been using reporting services for like 2 days and I don't know xml or vb script, so I apologize for the probably stupid question. Thank you in advance.
-Keith
I am trying to display a chart from a data source that runs a stored procedure. The data dislays fine in the dataset tab, however, when I try to preview the report I get the following message:
'An error occurred during local report processing. The definition of the report 'reportname' is invalid. An internal error occured on the report server. See the error log for more details'.
I have looked at the error logs, but they do not help. I am thinking that my stored procedure is pushing a limit of the chart report. If I display the same data in a table, it displays fine, it is only in a chart. As I stated, the data is displaying in the dataset grid.
Can anyone give me an idea as to what my problem might be? I have other charts that run fine, but not using a stored procedure like the one below where I am performing multiple selects.
Below is the stored procedure:
set ANSI_NULLS ON
set QUOTED_IDENTIFIER ON
GO
-- =============================================
-- Author: Tim Olig
-- Create date: 09/20/07
-- Description: Returns Total Stored Procedure
-- =============================================
ALTER PROCEDURE [dbo].[sp_db_ReturnsSummary]
@Date smalldatetime
AS
BEGIN
SET NOCOUNT ON;
Select rtsum.FiscalYear,rtsum.Period,
rtsum.RMAComplete_ALL,
rtsum.RMAComplete_ANO,
rtsum.RMAComplete_EXT,
rtsum.RMAComplete_FAB,
rtsum.RMAComplete_SUN,
rtsum.RMAComplete_SUP,
salessum.ShipRev
from
(SELECT
CASE WHEN datepart(YY,returns.invdate) = 1900 then 2008 else datepart(YY,Returns.Invdate) end as FiscalYear,
CASE WHEN datepart(YY,returns.invdate) = 1900 then 'PENDING'
WHEN len(datepart(mm, returns.invdate)) = 1 THEN 'P0' + ltrim(str(datepart(mm, returns.invdate)))
WHEN len(datepart(mm, returns.invdate)) = 2 THEN 'P' + ltrim(str(datepart(mm, returns.invdate))) END AS Period,
"RMAComplete_ALL" = sum(returns.TotalCredit),
"RMAComplete_ANO" = sum(case when returns.respdept = 'ANODIZING DEPT' then (returns.TotalCredit) else 0 end),
"RMAComplete_EXT" = sum(case when returns.respdept = 'EXTRUSION DEPT' then (returns.TotalCredit)else 0 end),
"RMAComplete_FAB" = sum(case when returns.respdept = 'FAB' then (returns.TotalCredit) else 0 end),
"RMAComplete_SUN" = sum(case when returns.respdept = 'SUNROOF' then (returns.TotalCredit) else 0 end),
"RMAComplete_SUP" = sum(case when returns.respdept = 'SUPPLIER' then (returns.TotalCredit) else 0 end)
FROM [returns]
WHERE invfiscalyear = 1990 or returns.invdate >= @Date
group by datepart(YY,Returns.Invdate), CASE WHEN datepart(YY,returns.invdate) = 1900 then 'PENDING' WHEN len(datepart(mm, Returns.invdate)) = 1 THEN 'P0' + ltrim(str(datepart(mm, Returns.invdate))) WHEN len(datepart(mm, Returns.invdate)) = 2 THEN 'P' + ltrim(str(datepart(mm, Returns.invdate))) END)
as rtsum
left outer join
(select
datepart(YY,transdate) as FiscalYear,
CASE WHEN len(datepart(mm,transdate)) = 1 THEN 'P0' + ltrim(str(datepart(mm,transdate)))
WHEN len(datepart(mm,transdate)) = 2 THEN 'P' + ltrim(str(datepart(mm,transdate))) END AS Period,
"ShipRev" = sum(case when (OrderType = 'Invoiced' or OrderType = 'ToBeInvoiced') and SalesAcctDesc = 'Sales' then Revenue else 0 end)
FROM sforep where transdate >= @Date
group by datepart(YY,transdate), CASE WHEN len(datepart(mm,transdate)) = 1 THEN 'P0' + ltrim(str(datepart(mm, transdate))) WHEN len(datepart(mm, transdate)) = 2 THEN 'P' + ltrim(str(datepart(mm, transdate))) END)
as salessum
on rtsum.fiscalyear = salessum.fiscalyear and rtsum.period = salessum.period
END
Thanks,
Tim Olig
We are working with scatter chart in reporting services.we need to divide the chart into quadrants.We can use VB code in reporting services.Can anyone let me know the VB code to divide that into quadrants and coloring the quadrants
Thanks in advance
Subha
Hi all--I'm looking at SQL Server 2005 Reporting Services as a possible reporting solution for our data warehouse. One of our reporting requirements is the ability to do Gantt charts--has anyone out there had any experiences with creating one with Visual Studio 2005?
Thanks in advance!
Representing an elevation value in a line chart? or (Any chart)
The below are the sample values
GRID_ID StarPoint EndPoint Elevation
3 0 900 1220.1
3 900 1000 1219.5
3 1000 1100 1219.2
3 1100 1300 1220.1
4 0 100 1330.1
4 100 200 1328.1
4 200 300 1329.1
Is it possible to have the value labels always on top of the bars of a bar chart?
On the Chart Series Labels properties under Appearance, I used Top for Position, but if the bar reaches the top of the chart area (and that is determined automaticaly by the Y Axis that and can't be a fixed value).
We are having trouble finding a lot of documentation around configuring the Funnel chart. Specifcally, we would like to know if there's an option to be able to place the lengend title on the actual Funnel layer. Also, we would like to be able to control the order of the funnel layers to match a business process order from top to bottom. It would appear that the Funnel defaults to aphabetical ordering of the layers. Any good reference for the options available?
View 4 Replies View RelatedI have a Pie Chart report that works well until Users discovered that when values are 0% or less across the chart, the Legend returns NaN. How do I format the Legend to return 0% instead of the NaN that Users do not want to see. Below is my express for the Legend Property="#AXISLABEL" & " - " & "#PERCENT{P0}".
View 5 Replies View RelatedParent Name ID Soft Hard Primary VTM
XYZ 2 50 10 40 100
rtm 3 20 20 60 500
RMM 4 40 20 40 300
I have the above output. When I try to input this as a dataset to a pie chart I don't get the data lables for two slices of the pie chart. Only one slice will show the values when showing data label option is enabled.
For the Pie chart, I have added Soft, Hard and Primary as Values. I haven't added a Category group or a Series group. Why isn't this showing the data labels for the other slices?
Do I need to transform the dataset so that it has a category and the value like below?
XYZ, 2, Soft 50
XYZ , 2, Hard, 10
XYZ, 2, Primary, 40
Will this work since it has a define category that I could insert for the chart.
Is there a possibility in SSRS to have One stacked bar of cumulative sum of different ID's and and Line Chart at left hand of the Bar which will show the Progress as soon as the ID turn to Competed status.
I have been trying to do this , however there is huge problem of scaling:
The line should be finished at all the completed ID's SUM which is the lowest stack of the Bar.
However , the bar gets stretched to all of the space.
I have tried to place it into Tab lix, But it doesn't work.
I have a requirement associated with SSRS bar chart.
Data in my DB is like shown below:
A
B
C
Opt1
Data1
10
Data2
20
Opt2
Data1
30
Data2
40
Opt3
Data3
50
Now I would like to build up a bat chart which should have:
Legends: Opt1, Opt2, and Opt3
Categories:
Data1(showing bars with scores as 10 and 30),
Data2 (showing bars with score 20 and 40),
Data3 (showing bar with scores 50 only)
I'm using Reporting Services 2008 R2, version 10.50.2550.0, and Visual Studio 2008, version 9.0.30729.4462 QFE. Not sure if the SQL version matters, since I haven't gotten the report out of the development environment.I've read lots of messages, including URL.... that show you can have multiple data entries per row in a Range Bar Chart, simply by turning DrawSideBySide to False.My data set basically contains four pieces of data, LineNumber, Equipment, StartTime and EndTime. I have data like:
1, 'CLM1', 08:00, 08:30
1, 'CLM1', 09:00, 09:15
2, 'SS1', 08:05, 08:35
2, 'SS1', 09:05, 09:35
(I actually have a date with my datetime entries, but that should give you the idea.) My chart is set up with Values of EndTime and StartTime. If I set my chart up with only Equipment in the Category Groups entry, my chart will show CLM1 from 08:00-08:30, and SS1 from 08:05 to 08:35. No sign of the other entries per equipment, although I added a tablix to retrieve the same data and it all shows up.Changing DrawSideBySide between True, False and Auto has no effect on the data displayed on my chart. If I add StartTime in the Category Groups, I do show all the data, but one row for each piece of data, which isn't what the customer wants.From what I can tell from various sites, I'm set up right, but it just isn't working.
I have a table that contains some data.
LabelName
LabelValue
TotalForRetire
10337
dummy1
0
TotalForRelatives
5850
dummy2
0
TotalForDisability
7337
TotalForOrange
23
I have a pie chart and a bar chart.
In the pie chart I want to plot only TotalForRetire and TotalForDisability and TotalForOrange
In the bar chart I want to plot only TotalForRetire,dummy1,TotalForRelatives.
Also, here I want the horizontal axis not to show the label for dummy1 as the value is 0. How can i do that for each chart?
I need to create area chart using SSAS cube which will be having :
sum(A) as per the Series group i.e Projects (expression used is Sum(Fields!Demand_FTE.Value))
Sum(B) as per the CategoryGroup1 =Sum(Fields!Demand_FTE.Value,"CategoryGroup1") where categoryGroup1 is calculated date
And Sum(C) = sum(Lookup(Fields!Time_FY.Value,Fields!Time_FY.Value,Fields!Capacity_FTE.Value, "DataSet2")).
I want Sum(C) to be calculated on Fields!Time_FY.Value (which is CategoryGroup2)
Sum(C) do not have any links with CategoryGroup1 and that is why my graph is synchronized.
Sum(A and B) belongs to Dataset1 and SUM(C) belongs to Dataset2
I have pie chart. In this i have to display the category group name , count as a data label. In this both category name and count should be in seperate line and should be in centre allignment. But for it is not centre allignment. In series label properties i am using this expression,=Fields!Group.Value & VbCrLf & Count(Fields!Countvalue.Value).I am geeting new line. But not in center allignment.
View 2 Replies View RelatedIn my Chart I have to keep the angel of the category field fix to 90 degree. When I do this the format of the Label does not look quite right.
I expect Below : I can work Out dd and mm positions ..what I am concerned about the date direction because of which its not quite readable.
I have tried many format in label format but it is not giving expected result.
When I place an image WITHIN a chart, it appears in the correct location in DESIGN mode, however, when I preview it, my chart renders...and then the image renders NEXT TO the chart. I can't get the image to display WITHIN the chart area.
View 8 Replies View Related
Hi,
I am trying to create a report in report in reporting services.
The requirement is to display the data in a chart. A surface chart to be exact.
It appears that reporting services has most of the Excel type charts available to display the data but I do not see the Surface Chart type. Is this type available in SQL Server 2005 reporting services? If not, is there a 3rd party software available that integrates into BIDS?
Thanks
How to increase the chart report size to avoid the mismatch of output data like below....
View 2 Replies View RelatedI have the below chart.
In this, I need to add line charts for the three years specifying the running total. I already have bar charts for the respective years. This is the query that I used to get the dataset.
SELECT [Parent Name], [ID], [Year], [Month], SUM([Value]) AS 'Running Total'
FROM Regulus_Data_Backup
GROUP BY [Parent Name], [ID], [Year], [Month]
order by [Parent Name],[ID], [Year], DATEPART(mm,CAST([Month]+ Convert(varchar(4),[Year]) AS DATETIME))
Then I added a series with a expression that had the chart type as line as shown below.
My Expression was
=RunningValue(Fields!Running_Total.Value,SUM,"MonthWiseData")
My 3 parameter was "MonthWiseData" which is my dataset name. Is this correct? I use the same dataset to get the bar charts too. I get a error message now when loading the report saying "the scope parameter must be set to a string constant.
My goal is to get bar values for 3 years for the 12 months and in the same chart get the cumulative numbers for the 3 years for the 12 months. How can I do this?
I have a chart that I am grouping data by Year, Month, day then Hour (this is to view server performance data) - however i need the label for the hour grouping to be in the format of HH:MM and not H:M by using expression
=HOUR(Fields!Timestamp_perfmon.Value) &":"&MINUTE(Fields!Timestamp_perfmon.Value)
...but this as you would kind of expect returns 0-23:0-5 ie 18:1 whereas i need it to return 18:12 or 8:12 PM..
when i change the format code for the x-axis it unfortunatey screws up all my other group by values and labels..
can anyone help?
I have this issues with empty points in a Line Chart. How to make it work with dynamic values in the series and some dates in the category, how to join the "data" values for a "series"where there are no category value. So far I cannot see any fix that would make it work by joining the data points with the "average" data on a empty point (no category value) and with the same color on the line.
View 2 Replies View RelatedSome labels such as 33314 are displaying over the columns. I need all labels to display at the top. How can I fix this without changing the size of the chart?
View 4 Replies View Related