Reporting Services :: How To Add Sub-Report From Main-Report In RDLC
Jun 26, 2014
I have 11 records in the Main report.I want to make Imagebutton for only the 11 record.If click on Imagebutton then the subreport show in the below.But there is no relationship between MainReport and SubReport.
I just created a report builder. I have a main report and i wanted to create a sub report. why i cant or i cant view the path or the folder of my .rdl file to be use as my sub report.
problem when add RDLC report wizard to add RDL report Unable to cast object of type 'System.Xml.Schema.XmlSchemaAny' to type 'System.Xml.Schema.XmlSchemaElement'.
I am trying to develop a report from cube,and it has one drill through report.when i click on sales amount field on main report,then it open the drill through report with details.Here i passed the **(category,subcat,product)parameters(Cascaded)** to drill through report in action part of main report.In my main report i have two columns .
when i click on 100, parameters are passed & it open the detail report correctly, but when i click on 50,the values for subcat parameter is not getting values in detail report and same as the product also.
How do I get data on my linked report based on my grouped subtotal and grand total from the main report. The subtotal and grand total are calculated columns.
I have a 3 columns in my matrix in the SSRS summary report. Actn_COAST, ActnCITY and NumbOfAccts.
The following is code for my summary report. The results are shown below.
SELECT Distinct ActnCITY, Count(ACCT) as NumbOfAccts, CASE WHEN ActnCITY in ('NY', 'OH', IN, 'NJ', 'SC', 'NC') THEN 'EAST COAST' WHEN ActnCITY IN ('CA'. 'NV', 'UT', 'WA', 'OR') THEN 'WEST COAST' ELSE 'OTHER' END AS Actn_COAST
FROM tbl1 where ACTNDATE between @STARTDT and @EndDT
Code for my detail report contains the following SQL
SELECT * FROM tbl1 where ACTNDATE between @STARTDT and @EndDT AND @ActnCITY = ActnCITY
I have linked my report based on the NumbOfAccts column. I am able to get data if I click any of the NumbOfAccts values related to the state I want. However when I am not sure how to make the subtotal and grand total work. I want when I click on the subtotal of either coast, I should be able to see records of that coast e.g., if I select 37 I should be able to see all the records in East Coast. If I click on the Grand Total, I only want data related to those 2 coasts.
I have a SSRS report with 4 sub reports embedded. Previously i faced a situation where sub reports was getting displayed with static data even if there is no data being pulled from data set. I solved this problem according to solution provided in my previous post here. Now blank space is getting displayed in place of empty sub report. But still the main report that hosts empty sub report (Which has a header with header name coming from main data set) is getting displayed. Is there any way wherein the whole main report can be suppressed when the sub report has no data?
I have created a .rdlc file in MVC application. I have used Matrix in report and also i have bar charts. Issue is when I view the report in my application--all the months data and all the years data is getting summed up..
ex: it should display like jan feb mar 1 2 3 but it is coming like Mar 6
I have group by as Month for Month columns and Year for Year columns, how to fix this error.
I developed a rdlc report. I have a graph chart. Sometimes the value of a label can =0. If the value =0 I want to hide the labelname. However, I also have dummy values =0. This is so that I can have spaces between the bars. The dummy values labels isn't shown in the graph. This works great. I need to add to the expression that if the name of the label isn't dummy but the value =0 to hide the labelname.
The data from sql: Expression in graph under chart data->category groups->category group properties->label: =Microsoft.VisualBasic.Interaction.SWITCH(Fields!LabelName.Value = "aTotalForRetire", "Retirement", Fields!LabelName.Value = "cTotalForRelatives", "Relatives", Fields!LabelName.Value = "eTotalForDisability", "Disability")
The result is below. I want to hide the label relatives as in this example the value=0. It will not always be the case. How can I do that?
I created a subreport1 with tablix.I created second subreport2 that has a tablix and one column chart and both are placed in a rectangle. No page break is applied to this rectangle. When I run the sub report, both tablix and Column chart are displayed on one page .
I created a main report and added Subreport 1 and Subreport 2 in 2 different rectangles. I set page break property of Rectangle(Subreport1) to End and no page break is applied to Rectangle of Subreport2.
When I run the main report, subreport1 is displayed in one page, subreport2 is displayed in 2 different pages.
I have a main report and 2 sub reports. I would like to pass the total Premium Paid from 2nd Sub report , and Total Bonus received from 3rd Sub report back to main report.
My scenario is actualy much more complicated than what i had attached below, which i cannot join the query for the 3 different reports together. But for demo purpose, i created the following sample scenario.
My main report is to display the sales summary by person by location.
A person may have more than 1 account number, and each account number is entitly for bonuses. As illustrated below.
I've been reading a lot of posts on this subject. I understand that the issue is due to the fact that the subreport is only rendered once. So after the main report is sorted on another column, the cell with the subreport produces an error.
What I want to know is whether or not this is considered a defect. And if it is a defect, is it fixed in another version?
I am currently running SSRS SQL2008R2 SP2 (20.50.4000.0)
I have done the following and a domain user would not access report created a login to the SQL server to the user (this SQL Server is where data source DB is)went to site setting in Report Manager and made this use a system userright clicked on report folder and made this user in the browser roleeven checked that in the report in question, the user is already in the browser role Still the user would not access the report! "User .......... does not have required permission" is the error message I am getting.
I have written a report visual studio. The report has 10 multi-value parameters that pull data from their individual data sets within the reports. When running the report from within Visual Studio it renders fine. There are no errors reported, only a warning related to a pathname I have use to retrieve image data and display on the report.Deployment of the report is error free.When I view the report I briefly get the "Loading" splash window, but then nothing. None of the headers or static text is displayed. The results window is blank.
The report defaults all the parameter values. In trying to debug the issue I have found by reducing the number of parameter values the report will render. Once I have all the values added, the report does nothing.Below is the query being used for the report. The where clause in the query shows the parameters being used and the syntax.We are running on Windows Server 2008 R2 and SQL Server 2008 R2.
Ralph SELECT RTRIM(a.ITEMNMBR) AS Style, RTRIM(a.ITEMDESC) AS Description, a.ITMSHNAM AS UPC, c.LOCNCODE AS Store, d.LISTPRCE AS ListPrice, a.CURRCOST AS Cost, a.USCATVLS_1 AS [Main Category], a.USCATVLS_2 AS Market, a.USCATVLS_3 AS [Alternate Retail], a.USCATVLS_4 AS Country, b.ITEMXTRAS_1_Type AS Type, b.ITEMXTRAS_2_Finish AS Finish, b.ITEMXTRAS_3_SubCategory AS SubCategory, b.ITEMXTRAS_4_Department AS Department,
We are about to implement SSRS reports (SQL Server 2012), and have found one issue we don't like. The report looks great when we open it in pdf format. However, when we open it in Excel format, we want it to be the raw data, not look like the pdf report. I tried the simpl headers, and that removed the page header/footer. However, the report format was still in play.In other words, we would like the report when opened in Excel, to look just like it does when we open it as a CSV.I have tried to modify the config file a couple of times. Here is my latest attempt:
Essentially I have set Visible = "false" for the Excel type, and tried to duplicate the CSV, changing the name to make it look to the user like it is "Excel". This fails. I checked the event viewer, and I see two entries.. The RSReportServer.config file has been modified. (Information)The value for UrlRoot in RSReportServer.config is not valid. The default value will be used instead.I literally took the file, opened it in Notepad, pasted in my changes, from another notepad window, and tried to run the report. I did not see EITHER of the two names I expected, using the OverrideNames tag. As I said earlier, I was able to affect the outcome, by setting SimpleHeaders to true (or however it is identified). That did work in that the page header and footer was removed.
I have a ssrs report having 2 tables in with 4 columns in each. When I go to export option in preview I can see all data coming in one excel sheet, But I am trying to get 2 tables in 2 different pages in Excel when I export.First page of excel comes with first table data with 4 columns and second page of excel comes with second table data with 4 columns .
I am working on reports in SSRS 2008 (not R2)... There are some reports with parameters that are hidden when the report is accessed through normal URL using ReportViewer.asx..The thing is that these hidden parameters need to be visible when the report is accessed using SSRS Report Manager.
I'm wondering how to print a SSRS report without bringing up a report viewer. Is there way to print(PDF format) the SSRS report in the web application( .net ) directly from the "print" button without bringing up a report viewer?
I have a report builder drill down report. I have row groups with totals. It looks like the attached. The problem is when the report is not expanded the Grand Totals column is not accurate... it is displaying the totals of one of the rows when expanded.The expression in the Total Show text box is
I have few reports under different folders in Report Manager. Is there a way to set the data source for the whole folder rather than each report individually? There is also a folder where reports generate dynamically. Since the report project doesn't exist anymore, I can't set the data source through code. How can I set the data source for the whole folder?
I was able to log in to SSRS report manager. But i was unable to run a report i designed on report builder.
It prompts for login when i wanted to run the report and i used the same windows authentication to sign in
It will show me the parameters but when i click on view report it gives this error
"Data source 'DataSource1': An error has occurred.
Details: Microsoft.ReportingServices.ReportProcessing.ReportProcessingException: Cannot create a connection to data source 'DataSource1'. ---> System.Data.SqlClient.SqlException: Login failed for user 'Acc-11Admin'."
I want to repeat line on each page of report on PDF while using 2 columns on report. The problem is that if i use table border it will also repeat after second table. i want a line between two tables.
We are generating excel report using report viewer at run time but if excel report having more then 65000 record generating error Microsoft. Reporting Services.OnDemandReportRendering.ReportRenderingException: Excel Rendering Extension: Number of rows exceed.
Is there a way to subscribe SSRS report using dynamic parameters for email and trigger the report from autosys job so that report should generate the exact time the job is triggered.Let me describe, my SSRS report should be triggered on success of one autosys job. i need to send email parameter and time of report schedule from this autosys job.
Hi, I'm having problems navigating from one report to another one if the second report has a multi-valued report parameter. When I navigate to the second report, I don't pass any parameters, but I get an error "parameter is missing a value" for the multi-valued report parameter. I have it setup as allow "multi-value" and "blank value". Any idea what the issue might be? Thanks.
How to display the logo in middle of report header , The logo is embedded in the Image folder . The column of the report are static. we are using SSRS 2008
I have a report which works fine with visual studio but when i uploaded the same into report server and tries to access it through IE or chrome or anything its dam slow.
I need to create a SSRS report using the Warehouse tfs_warehouse DB Report need to be drill down on WorkItemType Parents and child values. So, If we click on Product Back Log Item will get all the tasks inside it and so on....
------->Product BackLog items ----------> Bugs Or Tasks -----------> Tasks
I have done research and found out how to do it in OLAP cube ..but still can't figure out the TSQL query to be used.Found one of the query on forum:
SELECT * FROM DimWorkItem DWI INNER JOIN FactWorkItemLinkHistory FWILH ON DWI.System_Id = FWILH.TargetWorkItemID WHERE FWILH.WorkItemLinkTypeSK IN (SELECT DWILT.WorkItemLinkTypeSK FROM DimWorkItemLinkType DWILT WHERE DWILT.LinkName = N'Child') AND DWI.System_WorkItemType = N'Task' AND DWI.System_Rev = (SELECT MAX(DWI1.System_Rev) FROM DimWorkItem DWI1 WHERE DWI1.System_Id = DWI.System_Id) AND FWILH.SourceWorkItemID IN (SELECT DWI2.System_Id FROM DimWorkItem DWI2 WHERE DWI2.System_WorkItemType = N'Bug');
I was wondering if there was any way to add a value field to a report, with the time it took for the report to Process.
It would probably be a text field with an Expression, but don't know how that would go.
I know that in Expression there is a value for ExecutionTime (when report began to run), but nothing about when it ends.Can this be done? and if yes, how?
Is there a way to see Report-Level variables in Report Builder 3.0? Also, just as a feedback, it would be really nice if there were a way to see and easily access all of the variables used in a report from one location instead of going to the dataset, the report, and then to the individual groups (if needed) to see the variables. Also, it would be very useful if Group-level variables can show up in the Expression Builder as well.
I've gotten to the point of publishing the new reports on the SSRS server and have run into the following problem.
I use a field in the primary report with the "Go to report" action to open up another report (also published) for more details. It works properly from within ReportBuilder (2.0) using the report server and I can go to and from the secondary report as I expect. Its passing the correct parameters to the second report and its runs.
But when I use the reports from the SSRS web, the Go To link no longer works. Mouse hover shows its still a link but clicking goes no where. I can run both reports independently from SSRS and they still work.
I've tried this in IE and Chrome with no luck in either. I also poked around at Compatability view and popup blocker but nothing made any difference.