I rendered this xml from SSRS 2008. Is there a way to avoid the "details_Collection" tab in the rendered xml doc. Please see the colored tabs. These tabs are created from groups named Company and Info.
View 9 RepliesI'm using Reporting Services 2005 SP1 and wrote some code to render reports server-side.
My sample report has few parameters that must be passed so I pass these parameters with code.
<My code>
ReportServiceExecution.ReportExecutionService rs = new ReportServiceExecution.ReportExecutionService();
rs.Credentials = System.Net.CredentialCache.DefaultCredentials;
string extension, mimeType, encoding;
ReportServiceExecution.Warning[] warnings;
string[] streamID;
ParameterValue[] parameters = new ParameterValue[2];
parameters[0] = new ParameterValue();
parameters[0].Name = "pID";
parameters[0].Value = "6548747";
parameters[1] = new ParameterValue();
parameters[1].Name = "pClass";
parameters[1].Value = "8";
ExecutionHeader header = new ExecutionHeader();
ExecutionInfo executionInfo = rs.LoadReport(reportPayslip.Name, null);
executionInfo = rs.SetExecutionParameters(parameters, "en-us");
rs.ExecutionHeaderValue = header;
rs.ExecutionHeaderValue.ExecutionID = executionInfo.ExecutionID;
byte[] report = rs.Render("PDF", "<DeviceInfo><Toolbar>False</Toolbar></DeviceInfo>", out extension, out mimeType, out encoding, out warnings, out streamID);
</My code>
Actually, I have several more parameters but I've checked the collection and all the parameters I want are there and have values. Their names match those found in executionInfo.Parameters. But when I run my code I get the following error on Render():
<Error>
"This report requires a default or user-defined value for the report parameter 'pClass'. To run or subscribe to this report, you must provide a parameter value. ---> This report requires a default or user-defined value for the report parameter 'pClass'. To run or subscribe to this report, you must provide a parameter value. ---> This report requires a default or user-defined value for the report parameter 'pClass'. To run or subscribe to this report, you must provide a parameter value."
</Error>
I've double-checked and my parameter array does have the problematic parameter, I passed it a value but when I check executionInfo.Parameters I see that it's the only parameter that hasn't been give a default value after calling SetExecutionParameters(). So my parameters do seem to be passed but one seems to refuse getting a value. If I comment out the SetExecutionParameters() line I get, as expected a similar error but on another parameter (first one in the executionInfo.Parameters collection). So I'm left to beleive that the SetExecutionParameters() has some kind of bug as it works for all but one parameter. I've checked casing, spelling, tried passing phony parameters and from what I've seen I should be getting an error when I pass the parameters if I got something wrong.
Any help would be much appreciated.
We use Reporting Services for most of our reporting needs internally. However, we do have several products that we ship out into the field that run off local databases. These applications require reporting but often are not big enough for SQL Server and rarely run on a server with IIS.
Since MS has made .RDL an open xml standard does anyone know if there are any client rendering engines being developed? We would like the ability to develop all of our reports in .RDL and have them rendered in Reporting Services or in our standalone apps that run off MSDE or Access. Currently this is not possible. But, I think that someone could write a client renderer (like Crystal Reports has) to allow the use of .RDL files off a local data source without SQL Server and Web Services.
Thanks for any info on the subject.
Smoke
I have created reports using Reporting Services and the problem I am having is with the Print Layout. I view a report with parameters and print. I then change the parameters and click 'View Report' again and the new report is displayed. However, the report does not refresh in the Print Layout, so if I try to print the 2nd report, the first report is the one that is printed. Any ideas how to solve this?
Thanks
I have SCCM 2012 R2. I'm working on a custom report, using MS SQL Server Report Builder. I have other custom reports that work fine....they prompt for a collection and return results just on that one collection. The problem with the one I'm working on now is that it runs fine except for that....it prompts for a collection, lets you choose one collection,returns the desired info on each line, but it returns all systems, not just the one collection you selected. IOW, I'm having trouble getting the "where" clause to work right.
Here is the code for a report that works (it returns the selected collection and counts the patches needed by each machine):
select
CS.Name0,
CS.UserName0,
CS.ResourceID,
case
when (sum(case when UCS.status=2 then 1 else 0 end))>0 then ((cast(sum(case when UCS.status=2 then 1 else 0 end)as int)))
[code]....
Here is the code for the report that I'm having trouble with. What you see runs but it has none of the collection selection code I've tried since I haven't gotten it to work:
SELECT
DISTINCT(CPU.SystemName0) AS [System Name],
CPU.Manufacturer0 AS Manufacturer,
CPU.Name0 AS Name,
COUNT(CPU.ResourceID) AS [Number of CPUs],
CPU.NumberOfCores0 AS [Number of Cores per CPU],
[Code] ....
get the collection selection code to work in the second (processor count) sample?
My system environment: win2008 R2 SP1 64bit + SQL 2005 SP4 32bit
I amended the configuration file of rsreportserver.config with the below:
<Extension Name="CSV" Type="Microsoft.ReportingServices.Rendering.CsvRenderer.CsvReport,Microsoft.ReportingServices.CsvRendering" >
<Configuration>
<DeviceInfo>
<Encoding>UTF-8</Encoding>
</DeviceInfo>
</Configuration>
</Extension>
If I run the report and then click export by selecting the csv format, it looks ok with the encoding of UTF-8.
However, the same report , when I created a subscription and saved it in the hard driver. Its encoding became USC-2 Little Endian.
I am building reports using MS Visual Studio, and in the Preview tab I have the Refresh button and a button with a X to stop a report while rendering. However, when I deploy the report to the reporting server and I run it from the application the X button is not there, and users would find it useful sometimes to be able to stop long running reports. Is this a configuration change?
View 2 Replies View RelatedI want to Set Rendering Extension Report based,
Example
Report 1 should have the rendering options of EXCEL and PDF.
Report 2 should have the rendering extension of EXCEL only.
I referred below link for change the rendering extension. [URL] .... but its for all the reports format.
I have written a custom rendering extension for my reporting services. In one of my function inside custom rendering assembly, I want to access the underlying dataset and manipulate with it. I gain some knowledge on dataextension but not able to use it successfully. Can someone please help me get to underlying dataset?
Thanks.
I have a image in SSRS which is of PNG in format. when I preview the image it is coming as expected but if I export that to PDF the image is having the black color back ground. One more point to be noted here is my actual image file is having a small shading in it which is not visible properly, but the same back ground is coming with full black color line in the PDF form.
Another issue is : I have 3 sub reports in my SSRS report. In the preview I can see the data is coming in order of sub reports but if I export it to PDF the second sub-report data is coming at the end of the report and first and 3rd sub reports are fine. But If I have only one record for 2nd sub-report the order is same in both the Preview page as well as in the PDF format.
I have some HTML stored in a SQL Server table that I want to render in Reporting Services 2008,
HTML data contain HTML table. While generating report, SSRS not able to render it properly as table.
How we can display the HTML data as it is in SSRS 2008?
Hi everyone,
Our system is set up using SQL Server 2000 and Reporting Services for SQL Server 2000. Our web application is built with Visual Studio 2003, C# and .Net Framework 1.1 and is a 3-tier application. On both our localhost and development builds of the application, the images that get rendered do show up properly. On our live build, the images do not.
One difference that we found is that on the live build, users do not have file permission access to our middle tier that is running reporting services. After examining the URL of where the image is trying to point to, we see that it is trying to access the middle tier from the front presentation tier.
My question is, is there a way to send a certain parameter into the Render method to have the images stored somewhere else? Any help would be greatly appreaciated. Here is the code we currently have:
ReportingService rs = new ReportingService();
rs.Credentials = System.Net.CredentialCache.DefaultCredentials;
try
{
//Response.Write("Format: " + format);
if (format == "HTML4.0")
{
// Render arguments
byte[] result = null;
string historyID = null;
string devInfo = "<DeviceInfo><HTMLFragment>True</HTMLFragment></DeviceInfo>";
DataSourceCredentials[] credentials = null;
string showHideToggle = "true";
string encoding;
string mimeType;
Warning[] warnings = null;
ParameterValue[] reportHistoryParameters = null;
string[] streamIDs = null;
ParameterValue[] reportParameters = null;
SessionHeader sh = new SessionHeader();
reportParameters = new ParameterValue[5];
reportParameters[0] = new ParameterValue();
reportParameters[0].Name = "par_userID";
reportParameters[0].Value = userID;
reportParameters[1] = new ParameterValue();
reportParameters[1].Name = "par_menuID";
reportParameters[1].Value = menuID;
reportParameters[2] = new ParameterValue();
reportParameters[2].Name = "par_URL";
reportParameters[2].Value = reportURL;
reportParameters[3] = new ParameterValue();
reportParameters[3].Name = "par_startPage";
reportParameters[3].Value = startPage;
reportParameters[4] = new ParameterValue();
reportParameters[4].Name = "par_endPage";
reportParameters[4].Value = endPage;
//Clean up old files
RemoveFiles(ConfigurationSettings.AppSettings["tempFileLocation"]);
result = rs.Render(reportPath,
format,
historyID,
devInfo,
reportParameters,
credentials,
showHideToggle,
out encoding,
out mimeType,
out reportHistoryParameters,
out warnings,
out streamIDs);
// // For each image stream returned by the call to render,
// // render the stream and save it to the application root
// byte[] image;
// string optionalString = null;
// string tempFilePath = ConfigurationSettings.AppSettings["tempFileLocation"].ToString();
//
// foreach (string streamID in streamIDs)
// {
// image = rs.RenderStream(reportPath,
// "HTML4.0",
// streamID,
// null,
// null,
// reportHistoryParameters,
// out optionalString,
// out optionalString);
//
// FileStream stream = File.OpenWrite(tempFilePath + streamID + ".png");
// stream.Write(image, 0, image.Length);
// stream.Close();
// }
// Write the results to the current Web page
string htmlout = Encoding.ASCII.GetString(result);
htmlout = htmlout.Replace("<hr/>", "");
rs.Dispose();
return htmlout;
}
I'm using ReportingServices 2008 and I've this message "The operation has timed out" when rendering a report with some parameters. I've set in the execution properties of this report : Do not apply the expiration time for the execution of the report.When I look the ExecutionLogStorage table from Report Server DataBase I see that I've no message for this report when timeRendering is 21109ms. When I change the report parameters to obtain more data, the timeRendering is 76866ms and I've the message "The operation has timed out".
View 9 Replies View RelatedI am trying to export ssrs report from sharepoint to pdf file.But i am getting error in it."Sorry, Something Went Wrong".But when i try to render report in visual studio when i preview report. It gets exported in 14 minutes. but there is no error.
View 2 Replies View RelatedWe run std 2008. In my ssrs log I see this for one of our most critical reports...
library!ReportServer_0-64!2244!07/07/2015-08:24:53:: Call to GetPermissionsAction(/somedirectory/somedirectory1).... which I assume is an indication of a report starting to render by first checking permissions.
Around the time my user says he still saw the revolving arrow and he stopped the report because he felt it was running too long, I see...
webserver!ReportServer_0-64!1dbc!07/07/2015-08:54:44:: i INFO: Processed report. Report='/somedirectory/somedirectory1/importantreport', Stream=''
How can it be true that he stopped it and ssrs reports that it processed the report?
About 4 minutes later I see this entry in the log...
webserver!ReportServer_0-64!15e4!07/07/2015-08:58:34:: i INFO: Processed report. Report='/somedirectory/somedirectory1/importantreport', Stream=''
Which processed report message is right? Could there be multiples cuz of subreports? I see a number of errors and exceptions around these same times but do not know how to tie either to a specific report. Is there a way?
We are facing an issue where the report rendering for specific report parameters is failing with an exception
Throwing Microsoft.ReportingServices.ReportProcessing.UnhandledReportRenderingException: , Microsoft.ReportingServices.ReportProcessing.UnhandledReportRenderingException: An error occurred during rendering of the report. ---> Microsoft.ReportingServices.OnDemandReportRendering.ReportRenderingException: An error occurred during rendering of the report. ---> System.NullReferenceException: Object reference not set to an instance of an object.
at Microsoft.ReportingServices.Rendering.SPBProcessing.Tablix.TablixContext.CalculateDetailCell(PageItem topItem, Int32 colIndex, Boolean collect, PageContext pageContext)
[code]....
The server is running in Native mode. We tried restarting the services and also verified the disk space. Neither of them worked. The ExecutionLog3 table in the "ReportServer" database shows a rrenderingError as the report execution status. Report rendering with Excel format works fine.We enabled verbose logs and they are shared here. URL....
I need to create a report in SSRS 2015 but I need to bind that report to an external dataset .
I need it to work with parameters and stored procedure.
Another issue is that the report is standalone -rdlc.
Can I call the report from a webservice .asmx not wcf and render it automatically in pdf format?
We have recently migrated to SSRS2012 and since this time any report with a gauge or a chart within will not render. Upon researching even newly created reports will not render them.
View 2 Replies View RelatedI installed SSRS 2014 Reporting Services on a 2008R2 Enterprise server. When I try to subscribe to a report (also SQL 2014), the default rendering is MHTML. I want to change this default to EXCEL.
I updated the rsreportserver.config file and restarted SQL Server Reporting Service. Now, the default rendering for a subscription is 'XML file with report data' which is the first <Render> data element. If I change
<DefaultRenderingExtension>EXCEL</DefaultRenderingExtension> back to <DefaultRenderingExtension>MHTML</DefaultRenderingExtension>
And restart SSRS Service, the default subscription rendering is MHTML.
<DeliveryUI>
<Extension Name="Report Server Email" Type="Microsoft.ReportingServices.EmailDeliveryProvider.EmailDeliveryProviderControl,ReportingServicesEmailDeliveryProvider">
<DefaultDeliveryExtension>True</DefaultDeliveryExtension>
<Configuration>
[Code] ....
Is there a support of printing report with matrix that is set to RTL (LayoutDirection) which displays in ReportViewr control with property RightToLeft set to RightToLeft.Yes in DisplayMode = PrintLayout.
The report looks fine in the report viewr in DisplayMode = Normal, but when goes to PrintLayout, it seems that the left data on page is rendered first.
Example: This is the display of the report viewer, I would like to print the columns by the same order it displays here:
And this is the result when clicking Print Preview: the first page displays the data of the last columns and if i go to the last page (page 9) i will see the data of the first column as displays in the previous gif, I don't have a clue why?
Is there a property that can be set to force the print layout to render RTL. Anyway, it seem to me as a bug since the Report Viewer displays the data correctly and renders the data RTL as expected.
Is there a way to find all SSRS scheduled reports details such as (Report Name, schedule time, mail IDs configured, etc.)?
We have many SCCM reports on SRS, and manual work will take very long time..
Hi All,
I'm using VS 2005 to build a SQL Server reporting Services report. The wizard works great and prompts me to build my results query and then select fields to group the report by.
I'm using the 3 groups as follows:
Page: Product / Model name
Group: Serial No
Details: Orders
Here's the problem. I also want to show my order lines as there is another linked table connected to my order table which holds all order line items. Classic order - line example.
How can I modify the details section to show my line items, as well as not show empty rows when no line items exist?
Thanks!
When I use an SSAS cube in Excel the command text is just the name of the cube itself and does not require an MDX query. Is it possible in SSRS to avoid writing an MDX query?
View 3 Replies View RelatedI have a column bar chart which displays values for each month. As per the requirement, I am displaying the column values by selecting "Show labels" options. I see few values overlap on the column bars.
View 2 Replies View RelatedGetting old favourite message 'Out of Memory' when running a horizontal clustered chart with Category: 200 items Series: 200 items per Category.URL... 'By default, the report server sets WorkingSetMaximum to the amount of available memory on the computer. This value is detected when the service starts.'
The report has been tried on 3 large servers with 30GB & 60GB memory. The report runs on a 2008 install but not a 2008R2 install. We've created a test report that simply generates a series of data 1-n for Category and 1-n for Series where n can be set by parameter - so the issue is not to do with the volume of data or the processing required by SSMS. The report runs if the data is output to a table rather than a chart - so the issue appears to be with rendering the chart.
The chart is rendered when the Category has 200 items with a Series of 150 per Category. The report fails with Category 200 items and Series 200 per Category.
I have designed a fairly simple report in report designer that uses an analysis services cube as its input, and a basic matrix object as the primary design component. Cube performance either via object browser in Analysis Services or via connection from Excel is great. It does exactly what you build a cube for, i.e. it builds aggregations you can get to quickly. However rendering from a report designer report within Report Manager is a different story.
Even though this report is being rendered from an execution snapshot, it is painfully slow at opening and closing different levels of drill down. The report does have six levels of drill down, which I am sure is a factor. If I use a smaller dataset, performance does become more acceptable. However, I don't consider the requirements of my report to be all that extraordinary.
My conclusion thus far is that larger data sets with many possible page renderings are not the best candidates for HTML rendered reports. In this case Microsoft's cube analysis add-in to Excel might be a better choice. Thoughts and feedback on either how to improve the rendering speed or other presentation alternatives that would perform better would all be welcome.
I'm trying to add a custom report format to ssrs 2005 as per this [URL] I've added the code snippets in the example to three different ssrs 2005 server RSReportServer.config files but it does not work i.e do not show up in the export drop down when rendering report.
I've tried starting and stopping reporting services and it still does not works.
I've also modified the existing csv extension with different options to see if it works but to no avail.However it works with SSRS2008 R2 . In fact it works right after I saved the config file, no restart needed.For SSRS2005 the file is in C:Program FilesMicrosoft SQL ServerMSSQL.3Reporting ServicesReportServer. I checked the registry setting just to make sure I'm looking at the correct installation 'HKEY_LOCAL_MACHINE', 'SOFTWAREMicrosoftMicrosoft SQL Server90ToolsClientSetup', 'SQLPath' The three ssrs2005 instances are in three different physical servers and the problem is with all of them so it is not an isolated incident. I've dbowner rights to all three servers. The server versions are 9.0.4060, 9.0.4035 and 9.0.4053
In an asp.net app I'm creating email attachments from ssrs reports and am rendering them In Word and Excel using the WORDOPENXML and EXCELOPENXML format extensions. When I render the report in excel, the image is sized correctly, however, when I render the same report in word, its very small. I will attach a screenshot of each, and in the word screenshot, I will select the image so you can see the image control's outline (the control's actual size). Notice the image inside of the border is very small. How can I resolve this?
first, excel:
and now in word:
I have scoured the Microsoft forums and the internet to find out how I can generate the output of a CSV report that has double quotes around each value and is comma separated as follows:
"Abcd","123456","Efghi","789012","JKLMN"
If I try to concatenate double quotes around the values in the stored procedure or in the RDL, two double quotes appear around each value as follows.
""Abcd"",""123456"",""Efghi"",""789012"",""JKLMN""
I understand that this is because the default qualifier is double quote. What I see is that every time a double quote appears in a value (along with commas and line breaks), the qualifier will activate. Is there any way to turn this off for double quotes?
If I try to enter: <Qualifier>false</Qualifier>, the word "false" appears as the qualifier instead.
The only way I have found that produces a result similar to what I need ("Abcd","123456","Efghi","789012","JKLMN") is if I add a line break - chr(10) in the RDL in each field. However, this won't work for me because I can't have line breaks in each field in the output.
Note that in SSRS 2005, I was able to produce the report output as I state above by setting the field delimiter and qualifier as follows:
<FieldDelimiter>@?!?@</FieldDelimiter>
<Qualifier>?#^?</Qualifier>
This essentially turned the field delimiter and qualifier off, as the values entered would never appear in the data. I then could add double quotes and commas in the RDL. This used to work in the old version but does not anymore.
I have two grids in two different pages. In that one grid have more number of columns compared another grid. In this case report takes width of the first grid which has more no of columns. So empty sapce in right side of the report is there for second grid. Based on the grid size reprt width should be there. How to avoid empty space in this?
View 8 Replies View RelatedI have a chart with series that needs conditional colour for three conditions. One condition must be transparent. I have tried the various IFF or SWITCH expressions below and some work fine in SSDT but when I deploy them to the browser the formatting is lost. This simple IFF expression works. The series is transparent as required both in SSDT (Visual Studio BIDS) and IE11 and Firefox browsers but I need two other conditions.
=IIF(Fields!ExhibitionID.Value = -1, "#00ffffff", "Red")
Both of the expressions below work in SSDT (Visual Studio BIDS) as expected but when deployed to the browser none of this formatting is rendered and all series are in blues even the ‘transparent’ series. No red at all.
=IIF(Fields!ExhibitionID.Value = -1,"#00ffffff", IIF(Fields!ExhDepartment.Value = 27,"Orange","Red"))
=Switch(Fields!ExhibitionID.Value
= -1,"#00ffffff",Fields!ExhDepartment.Value = 27,"Orange",(Fields!ExhDepartment.Value <> 27) AND (Fields!ExhibitionID.Value <> -1),"Red")
I have tried deleting various files RDL and DATA. I have tried uploading the file from report manager in IE and I have tried editing the file in report manager.
I have a report which takes around 5 seconds when run in BIDS but takes around 20 seconds when deployed on report server.Execution log says TimeDataRetrieval is around 3-4 seconds and rendering time is around 15-17 secs.From this report I am passing 8 parameters to a drill through report and there are 36 text boxes where I have defined these parameters for drill through action.All these parameters are populated in main dataset.When I deployed the same report without any drill through action and parameter, it takes 5 seconds.So I am suspecting that because of drill through parameters report is taking more rendering time on server.I am using 2008R2 and IE11.
Is it expected behavior that due to so many parameters for drill through action, report will take more rendering time?If yes, then why is it not taking same time in BIDS?
I am trying to create a matrix report to work similar to a pivot table, where when a user clicks on the count, the details are displayed. When I add the action to open a sub-report, how do I pass in the parameter values for the group that was selected? meaning if in row group- I have company name, and column group I have job title, when the count gets clicked, i need to pass in the company name for the row that was clicked along with the column group. How can I proceed?
View 2 Replies View Related