I have two grids in two different pages. In that one grid have more number of columns compared another grid. In this case report takes width of the first grid which has more no of columns. So empty sapce in right side of the report is there for second grid. Based on the grid size reprt width should be there. How to avoid empty space in this?
View 8 RepliesI added the row group to show up as the tree view in the left side of the report. But I need it to display the records in the report detail for just that group value for the records when I clicked the group value from the tree view list.
Currently, it‘s not doing that. It takes me to that page where the group value is listed but it lists all other records too (which I don't want).
When I use an SSAS cube in Excel the command text is just the name of the cube itself and does not require an MDX query. Is it possible in SSRS to avoid writing an MDX query?
View 3 Replies View RelatedI have this issues with empty points in a Line Chart. How to make it work with dynamic values in the series and some dates in the category, how to join the "data" values for a "series"where there are no category value. So far I cannot see any fix that would make it work by joining the data points with the "average" data on a empty point (no category value) and with the same color on the line.
View 2 Replies View RelatedIn My cube I have :
A Fact table <<Company Revenue>>
2 Dimension <<Month.Dim>> , <<Company>>
I have 4 company say (A,B,C,D) but i have record for only company A & D that too only for December month .
When I create a SSRS report out of the cube i want a matrix where all the company names to be displayed in the rows & all the months in the columns and company's revenue in data
What my report is displaying :
Company | December
-------------------------------------------------------
A | 20000
-------------------------------------------------------
D | 3900
-------------------------------------------------------
what is needed :
Company | January | February | March | ........... | December
-----------------------------------------------------------------------------------
A | | | | | 20000
----------------------------------------------------------------------------------
B | | | | |
----------------------------------------------------------------------------------
C | | | | |
----------------------------------------------------------------------------------
D | | | | | 3900
-----------------------------------------------------------------------------------
How do i achieve this either in SSAS or SSAS.
I have a report I'm trying to modify for a client that has two auto-grow tablix. We want the second tablix to start after the first one completes, however the first tablix will overwrite the second one if it contains multiple rows, rather than pushing it down. How can I control this?
View 2 Replies View Relatedwe have a value in a column with double space between characters like" abcd efgh", when I do the preview of the report I see the value as it is with double space; but when I deploy the report on to the reporting server, I just see only single space between the characters. whys is it eliminating one space when it is deployed on the reporting server? how can I get the same value with 2 spaces?
View 2 Replies View RelatedI'm using SQL Server 2008 R2 BIDS to accomplish this.
View 7 Replies View RelatedI want to send a status report for disk space such as :
Server Name
Drive | Total disk space | free space | used in %
I want do this for multiple server in one SSRS report or HTML format
I build a tablix A in SSRS, which contains a tablix B and a textbox C. When the report is exported to word, I found that there is white space between the tablix B and textbox C if the row of tablix B is spilled over to next page.
If I export the report to PDF, the white space issue is gone.
Is there any way to get the report toolbar using SOAP Api in SSRS reporting.
View 6 Replies View RelatedI have done the following and a domain user would not access report created a login to the SQL server to the user (this SQL Server is where data source DB is)went to site setting in Report Manager and made this use a system userright clicked on report folder and made this user in the browser roleeven checked that in the report in question, the user is already in the browser role Still the user would not access the report! "User .......... does not have required permission" is the error message I am getting.
View 6 Replies View RelatedI have written a report visual studio. The report has 10 multi-value parameters that pull data from their individual data sets within the reports. When running the report from within Visual Studio it renders fine. There are no errors reported, only a warning related to a pathname I have use to retrieve image data and display on the report.Deployment of the report is error free.When I view the report I briefly get the "Loading" splash window, but then nothing. None of the headers or static text is displayed. The results window is blank.
The report defaults all the parameter values. In trying to debug the issue I have found by reducing the number of parameter values the report will render. Once I have all the values added, the report does nothing.Below is the query being used for the report. The where clause in the query shows the parameters being used and the syntax.We are running on Windows Server 2008 R2 and SQL Server 2008 R2.
Ralph
SELECT RTRIM(a.ITEMNMBR) AS Style, RTRIM(a.ITEMDESC) AS Description, a.ITMSHNAM AS UPC, c.LOCNCODE AS Store, d.LISTPRCE AS ListPrice, a.CURRCOST AS Cost,
a.USCATVLS_1 AS [Main Category], a.USCATVLS_2 AS Market, a.USCATVLS_3 AS [Alternate Retail], a.USCATVLS_4 AS Country, b.ITEMXTRAS_1_Type AS Type,
b.ITEMXTRAS_2_Finish AS Finish, b.ITEMXTRAS_3_SubCategory AS SubCategory, b.ITEMXTRAS_4_Department AS Department,
[code]...
I have a ssrs report having 2 tables in with 4 columns in each. When I go to export option in preview I can see all data coming in one excel sheet, But I am trying to get 2 tables in 2 different pages in Excel when I export.First page of excel comes with first table data with 4 columns and second page of excel comes with second table data with 4 columns .
View 2 Replies View RelatedI'm wondering how to print a SSRS report without bringing up a report viewer. Is there way to print(PDF format) the SSRS report in the web application( .net ) directly from the "print" button without bringing up a report viewer?
View 2 Replies View RelatedI am trying to develop a report from cube,and it has one drill through report.when i click on sales amount field on main report,then it open the drill through report with details.Here i passed the **(category,subcat,product)parameters(Cascaded)** to drill through report in action part of main report.In my main report i have two columns .
columns are **Level** and **Salesamount**.
Values are like
**[-]category** **100**
**[-]subcat** **50**
**product** **30**
when i click on 100, parameters are passed & it open the detail report correctly, but when i click on 50,the values for subcat parameter is not getting values in detail report and same as the product also.
Here i used the expressions in parameter values
**pCategory**----iif(inscope(category),!fields.category.value,split(join(Parameters!category.value,","),","))
**psubcat**----iif(inscope(subcat),!fields.subcat.value,split(join(Parameters!subcat.value,","),","))
**pproduct**----iif(inscope(product),!fields.product.value,split(join(Parameters!product.value,","),","))
How do I get data on my linked report based on my grouped subtotal and grand total from the main report. The subtotal and grand total are calculated columns.
I have a 3 columns in my matrix in the SSRS summary report. Actn_COAST, ActnCITY and NumbOfAccts.
The following is code for my summary report. The results are shown below.
SELECT Distinct ActnCITY, Count(ACCT) as NumbOfAccts,
CASE WHEN ActnCITY in ('NY', 'OH', IN, 'NJ', 'SC', 'NC') THEN 'EAST COAST'
WHEN ActnCITY IN ('CA'. 'NV', 'UT', 'WA', 'OR') THEN 'WEST COAST'
ELSE 'OTHER'
END AS Actn_COAST
FROM tbl1
where ACTNDATE between @STARTDT and @EndDT
Code for my detail report contains the following SQL
SELECT * FROM tbl1 where ACTNDATE between @STARTDT and @EndDT AND @ActnCITY = ActnCITY
I have linked my report based on the NumbOfAccts column. I am able to get data if I click any of the NumbOfAccts values related to the state I want. However when I am not sure how to make the subtotal and grand total work. I want when I click on the subtotal of either coast, I should be able to see records of that coast e.g., if I select 37 I should be able to see all the records in East Coast. If I click on the Grand Total, I only want data related to those 2 coasts.
Is there a way to subscribe SSRS report using dynamic parameters for email and trigger the report from autosys job so that report should generate the exact time the job is triggered.Let me describe, my SSRS report should be triggered on success of one autosys job. i need to send email parameter and time of report schedule from this autosys job.
View 3 Replies View RelatedHi,
I'm having problems navigating from one report to another one if the second report has a multi-valued report parameter. When I navigate to the second report, I don't pass any parameters, but I get an error "parameter is missing a value" for the multi-valued report parameter. I have it setup as allow "multi-value" and "blank value". Any idea what the issue might be?
Thanks.
How to display the logo in middle of report header , The logo is embedded in the Image folder . The column of the report are static. we are using SSRS 2008
View 6 Replies View RelatedI have a report which works fine with visual studio but when i uploaded the same into report server and tries to access it through IE or chrome or anything its dam slow.
how to get rid of this issue?
I need to create a SSRS report using the Warehouse tfs_warehouse DB Report need to be drill down on WorkItemType Parents and child values. So, If we click on Product Back Log Item will get all the tasks inside it and so on....
------->Product BackLog items
----------> Bugs Or Tasks
-----------> Tasks
I have done research and found out how to do it in OLAP cube ..but still can't figure out the TSQL query to be used.Found one of the query on forum:
SELECT * FROM DimWorkItem DWI
INNER JOIN FactWorkItemLinkHistory FWILH ON DWI.System_Id = FWILH.TargetWorkItemID
WHERE FWILH.WorkItemLinkTypeSK IN (SELECT DWILT.WorkItemLinkTypeSK FROM DimWorkItemLinkType DWILT WHERE DWILT.LinkName = N'Child')
AND DWI.System_WorkItemType = N'Task'
AND DWI.System_Rev = (SELECT MAX(DWI1.System_Rev) FROM DimWorkItem DWI1 WHERE DWI1.System_Id = DWI.System_Id)
AND FWILH.SourceWorkItemID IN (SELECT DWI2.System_Id FROM DimWorkItem DWI2 WHERE DWI2.System_WorkItemType = N'Bug');
i just clicked on Advanced mode in Column Group, and then in Row Group Side i set Fixed Data=true for first top static. I'm using local report not server report and i'm displaying that local report in Reportviewer. Now also its not working....
View 6 Replies View RelatedWe are trying to use reporting services to execute a url when the SSRS report is executed. For example when I execute a SSRS report I would like the report to automatically access [URL] (as an example). The reason we are doing this is we want to access another reporting application but record the number and times of access via the reporting services execution tables/views. Is this achievable by putting some code in the Report properties. Can you open - execute url and then close report via some code.
View 3 Replies View RelatedI have below query which is working fine in SQL but if i use same query in SSRS dataset then it is not working at all.If i put only one condition in where clause then it works but if i put multiple conditions then it does not works in SSRS and through error "data is not available".
SELECT id,
DATEDIFF(DAY, Created, BMTRequestReviewDate) AS 'EvaluateDays',
all code goes here
FROM [dbo].[SBWT_Data]
WHERE
upper(Status) not like '%XX%'
AND upper(Status) not like '%DELETED%'
upper(Status) not like '%CLOSED%'
---OR
WHERE Status NOT IN ('90 - Closed','XX - Rejected','XX - Request Rejected','XX - Deleted')
As you can see in code i have tried with both where conditions but it is not working. It seems that SSRS does not supports multiple conditions for same field.
I am having report like below
Manager Name ClientName Procedure count
Paul Infi P1 3
P2 3
P3 3
Hun wallmaart P1 1
report group on ManagerName.
How to get the count column.
how can i create a report like this format in SSRS ? In this format grouping will be applied on Phase code and tablix/matrix will be repeated the same way like shown above.The headers must repeat on the next pages too.Web Developer / Web Designer / Software Developer / UI Designer
View 5 Replies View RelatedI am trying to get my ssrs report in an excel. I want the report to be displayed in a single excel sheet, however, I am getting multiple sheets. I have even tried the page break functionality and used the
expression(=IIF(Globals!RenderFormat.Name="EXCEL",TRUE,FALSE) in the tablix properties--> pagebreak--->disabled option.
The same is not working. what am i missing here?
No I have a map of China to show the sales of each province in SSRS (SQL Server 2008 R2)
I want to add logo of my company and some remarks about the data on map.
I have tried to add logo as an image then drag it on the map, but when it showed up the logo just outside the map.
SSRS report exporting to pdf generates this error
<detail><ErrorCode xmlns="http://www.microsoft.com/sql/reportingservices">rrRenderingError</ErrorCode><HttpStatus xmlns="http://www.microsoft.com/sql/reportingservices">400</HttpStatus><Message
xmlns="http://www.microsoft.com/sql/reportingservices">An error occurred during rendering of the report.</Message><HelpLink xmlns="http://www.microsoft.com/sql/reportingservices">http://go.microsoft.com/fwlink/?LinkId=20476&EvtSrc=Microsoft.ReportingServices.Diagnostics.Utilities.ErrorStrings&EvtID=rrRenderingError&ProdName=Microsoft%20SQL%20Server%20Reporting%20Services&ProdVer=11.0.5343.0</HelpLink><ProductName
[code]...
I have a requirement associated with SSRS bar chart.
Data in my DB is like shown below:
A
B
C
Opt1
Data1
10
Data2
20
Opt2
Data1
30
Data2
40
Opt3
Data3
50
Now I would like to build up a bat chart which should have:
Legends: Opt1, Opt2, and Opt3
Categories:
Data1(showing bars with scores as 10 and 30),
Data2 (showing bars with score 20 and 40),
Data3 (showing bar with scores 50 only)
I have a Report In that report I need to break out company code and export this report on excel and each company code shown its own tab in excel .I just add image about report details.I tried this issue but i cant get the exact names on excel sheet.
View 3 Replies View RelatedI have created a report that sharing two datasets for displaying the data. This datasets are using Stored procedure for execution of the report.One of the stored procedure using Order by clause and returning the data.But on running the report , the report viewer displays the unsorted data of the filed. But if we run the stored procedure directly from the sql server , it will return the sorted data.
View 8 Replies View Related