Reporting Services :: How To Filter MDX Query Using SSRS Report Parameter With Multiple Values
Oct 14, 2009
I am creating a SSRS report using a SSAS cube as it data source. The user would like to select multiple values from a reporting parameter that is then used as a filter on the MDX statement. I am bale to have the report work successfully when only one value is selected but not when multiple values are selected; the report uses only the first value from the reporting parameter when it contains multiple values. How do I filter an MDX query using a SSRS report parameter with multiple values?
View 3 Replies
ADVERTISEMENT
Jun 1, 2015
Is it possible to have different chart (having their dataset from same shared datasets) like six on one report, then secondly can they all respond to same parameter filter.
View 3 Replies
View Related
Jul 7, 2015
There is a multi value parameter called "include" in the report where "Allow Multiple Values" is checked and it has 4 Available values as shown in the attached screen shots and preview of the report is also shown .There is no data set for this parameter and the values will get displayed on the report based on the visibility condition set in the report.Example : If first value is selected then 1 is passed and based on the visibility condition set in the report - the report output is displayed.None is default value and has value 4 and when the report is run with this option i.e. "None" then rest three parameter values are not applicable .
Requirement :
-When the end user selects (Select All) Check box then (None)
-check box must be disabled or must not appear for selection for the end user
-When the end user selects check boxes either of the first three except None then also None check box must be disabled or must not appear for -selection for the end user
-when the end user selects a combination of first three then also None check box must be disabled or must not appear for selection for the end user
-The None is set as default with a value as 4 and is applicable only when the user does not select either of the first three values and the report will run.
View 3 Replies
View Related
Jul 9, 2015
Created Prod order status report, in status, we have different status
created =0
start =4
released =3
reported as finished =5
ended =7
I have the report, in report don't want to show the Prod order for ended status, how can I add the filter for this so it can show for all the other status not ended status. when I did on filter <7 , it did not work
View 4 Replies
View Related
Jun 17, 2012
I am SSRS user, We have a .net UI from where we want to pass multi select values, but these values are comma separated in the database. how can I write a sql query such that when I select multi values on my UI, the comma separated values are take care of.
View 5 Replies
View Related
Apr 22, 2015
I'll go to a dataset, open up the query designer, add a new parameter, then refresh the fields, but the parameter won't be added as a report parameter. If I go to the dataset properties under the list of parameters, the value in the dropdown will be blank. However, sometimes this will automatically add.
Is this a bug in Visual Studio? How do I get around this?
View 3 Replies
View Related
Apr 22, 2015
In an existing SSRS 2012 report, I have a requirement for a user to be able to select by multiple school(s) and/or multiple grade(s). This is fine except certain schools like elementary have grade levels of KG to 06, Middle school has grades of 06 to 09 and high school has grades of 10 to 12. Thus for example, if a user has initially selected grades 11 and 12 and then they select an elementary school that has grades KG through 06, the 'grade level' selection would need to change.In other words, I am thinking of initially having the available and default values for the parameter called 'Grade' set to KG through 12. However if a school is selected that only has specific grade levels like elementary school, how can I override the original grade level and only allow the user to select grades that the particular school contains?
View 3 Replies
View Related
Sep 5, 2007
Hi,
I'm having problems navigating from one report to another one if the second report has a multi-valued report parameter. When I navigate to the second report, I don't pass any parameters, but I get an error "parameter is missing a value" for the multi-valued report parameter. I have it setup as allow "multi-value" and "blank value". Any idea what the issue might be?
Thanks.
View 3 Replies
View Related
Oct 3, 2012
I'm building a report that has a column in the table called countries of origin, that column can contain data like "USA","China" ( normal countries) but some rows can also contain "USA, China, Australia" ( multiple counties in one row).
I'm trying to build a filter to filter my results :
-I have a data set created with a list of all world countries
-I've Build a Parameter containing a drop down list with all countries
--- My problem is when I want to create the filter in my main data set , I can so it , but when I search for example for "USA" , I don't get the lines where there are multiple countries and "USA" is one of them...
There must be an expression in the filter that will be able to search through all the values in the string and return me my correct results.
View 19 Replies
View Related
May 7, 2012
I created a parameter with available values from a dataset.
By default i want it to display the maximum value. and then the user can select the dates if he does not like the default value.
How to i do this. because when i tried to set the paramter default value to max(dataset!dt.value) it says expression canot be used.
How to do this. Should I create a dataset with maximum value and then assign it to this one.
View 12 Replies
View Related
Sep 10, 2015
Table : incident
----------------
incident_id usr_id item_id Inc_Date
10059926 191 61006 8-22-2015
10054444 222 3232 6-7-2015
Table: act_reg
--------------
act_reg_id act_type_id incident_id usr_id act_type_sc
454244 1 10059926 191 ASSIGN
471938 115 10059926 191 TRAVEL TIME
473379 40 10059926 191 FOLLOW UP
477652 115 10059926 191 TRAVEL TIME
489091 504 10059926 191 ADD_ATTCHMNTS
477653 504 10054444 222 ADD_ATTCHMNTSParameter: @attach (value=1, Label=Yes & Value=0, Label=No)
Result (While I am selecting 'Yes' in dropdown)
----------------------------------------------
incident_id usr_id item_id
10059926 191 61006
10054444 222 3232
SELECT incident.incident_id,incident.usr_id,incident.item_id
FROM incident
where exists (How i can write query here to check the act_type_sc=ADD_ATTCHMNTS is exists)
View 7 Replies
View Related
Aug 13, 2015
we are using SSRS 2012.Oracle 9i as back end database. Select A,B,C from view where A in (Param1) in above query when I am passing 1 value getting output in 30 sec. when I passed two values getting time out error in SSRS. how to pass multiple values in Oracle 9i in SSRS report.
View 4 Replies
View Related
Jun 25, 2015
I am facing an Issue with my SSRS-Reports. I have a stacked column chart in my report and the columns are linked to another report, a sub-report with 6 parameters. Right now after clicking the columns, the sub-report get opened in the same IE-Tab, with relevant parameters and it works out correctly. Challenge is, to open the new report in a new tab / window.
My Current situation: A Chart report, with Action “go to report” on series properties with 6 parametersChallenge: open linked sub-report in a new tab.Info 1: new path of sub-report looks like this:
http://<my_report_server>?ItemPath=<subreportName>&ExecId=qwercc45xgfvll45e4ebgjna&PingId=314x1cy4etmnky45abszeb99
Already tried with no success: I know, action “go to URL” using Expression:
="javascript:void(window.open('http://……','_blank'))"
Info 2: the parameters are like these: CompanyName; Date_From; Date_To; Title; Division; ProfitCenter.
I don’t know If I should try to create this ExecId and PingId; If there is any way to pass the through the parameters or there is another way.
View 3 Replies
View Related
Jun 24, 2015
I want to Change parameter position in SSRS report.I need Start Date and End Date Parameter at same column so client can easily select Start Date and End Date.I have tried a lot but not succeed.
How Can I change the position of Start Date and End Date.I can't change order of other three parameter Select Institutions, Select Author and Course Pack Names parameter because they are internally related to each other(forward dependencies are there).
View 2 Replies
View Related
Mar 9, 2015
I created the report, which has 4 pages. Each page contains bunch of tables and charts, which display data in scope of dataset, created for each page and reflecting certain subject. Each page also has Header and Footer.
My users requested, the report has possibility to include or not include data on Page #4.
Other words, report should display 3 or 4 pages based on the entered parameter.
1. I created parameter named “Include #### metrics”, which contains options: Y, N
2. For each object on the page 4 I added dependency on the selected parameter in the visibility option.
Now if user select parameter Not include Page #4, report displays 3 pages as expected and page #4 is empty, but with Header and Footer.
The problem: Their preference is to not to show page 4 at all if someone chooses to not to include #### metrics.
My question is how to force the report to display just 3 selected pages.
View 5 Replies
View Related
May 21, 2015
I have an SSRS report that gets its data from an SSAS cube, and it essentially displays a list of students and absences. Everything works fine.
But the users only want to see the top N students with the highest absences. For example, today they want to see the top 100, but during summer vacation, they only want to see the top 5.
Is there a way to add this parameter to the SSRS report? So if I select "5" from the dropdown parameter, it will show the top 5 absences.
The query that I use to populate the report is something simple:
SELECT NON EMPTY { [Measures].[Absences] } ON COLUMNS, NON EMPTY { ([Dim Date].[Date Key].[Date Key].ALLMEMBERS * [Dim Student].[Lte Cell Key].[Lte Cell Key].ALLMEMBERS ) } DIMENSION PROPERTIES MEMBER_CAPTION, MEMBER_UNIQUE_NAME ON ROWS FROM ( SELECT ( STRTOSET(@DimDateDateKey, CONSTRAINED) ) ON COLUMNS FROM [Daily Cube]) CELL PROPERTIES VALUE, BACK_COLOR, FORE_COLOR, FORMATTED_VALUE, FORMAT_STRING, FONT_NAME, FONT_SIZE, FONT_FLAGS
View 2 Replies
View Related
Oct 9, 2015
I am using SSRS 2008 R2 Report Builder 3.0 (10.50.4276.0) . I have simple set of data which has a persons Title and Name e.g. Mr Smith, Miss Jones, Doctor Foster
The report has a parameter where the user can select which records to show based on the matching titles (Mr, Miss, Doctor)
The Query for the report uses Title in (@Title) where @Title is the only parameter which can take multiple values. The report works correctly for any 1 value selected, but as soon as 2 or more values are ticked in the drop down, it fails.
I believe the parameter value is being passed into the query with a comma separating the values e.g. Mr,Miss which causes the IN statement to give an error, as the statement would be where Title IN ('Mr,Miss') which does not match any of the data values.
The parameter value passed needs to be 'Mr','Miss' for the IN statement to work. What statement do I have to put in the report query to get it to select any of the data rows where the title matches any 1 of the selected values?
View 5 Replies
View Related
May 19, 2015
I Have an SSRS report which shows questions and answers pulled from a view tables.I have 3 rows: Row 1 shows questions and answers 1 - 128, row 2 shows questions and answers 128 to 248 and row 3 shows 248 onwards.I only want the row with the correct questions and answers to show.So am using this query for example:
=IIf((Fields!vQuestions_Question_ID.Value < 128 Or Fields!vQuestions_Question_ID.Value > 247)
AND
(Fields!vQuestions_Response_value.Value < 128 Or Fields!vQuestions_Response_value.Value > 247), False, True)
which fails.If I only use= IIf(Fields!vQuestions_Question_ID.Value < 128 Or Fields!vQuestions_Question_ID.Value > 247, False, True) this works.What is the correct syntax for the multiple IIfs as i want both the criteria in the first query satisfied?
View 2 Replies
View Related
May 11, 2015
I have a report with 2 tablixes, both the tablixes can be hidden based on the parameter selection. The 1st tablix has a drill through action on one of the columns, that calls the 2nd tablix in the SAME report. Once you click on the drill through, the 1st tablix is no longer visible, only the 2nd one is.
The report is working fine, until you export it to CSV file. Once you are on the 2nd tablix (1st one is NOT visible at this time in the report), and then when you export it to CSV, BOTH, the 1st tablix as well as 2nd tablix are visible in the CSV file. Why does the 1st tablix come up in CSV IF you just exported 2nd tablix to CSV?
Is there a workaround to NOT show the parent/1st tablix at all if the 2nd tablix is exported? Excel works fine!I know sub-reports instead of multiple tablixes might solve this issue.
View 4 Replies
View Related
Jul 16, 2015
I am using SSRS 2008 and the reports we have use parameters of type Date/Time. The reports work well when the parameter values are entered correctly.
When entering an invalid date format for one of the Date/Time parameters the following error is displayed "The value provided for the report '<parameter name>' is not valid for its type. (rsReportParameterTypeMismatch). This seems to be working correctly as well. However, when the correct date format is then entered for the report parameter for which the report threw an error, the error persists and the report doesn't run again. Setting the parameter to "NULL" doesn't work either.
The only way to get the report to run again is to refresh the entire report. Of course, if at that point one has entered a bunch of other parameter values, those values all disappear.
View 2 Replies
View Related
Jun 3, 2015
I have a report with a subscription enabled and the default values that are selected for the report frequently change. I have our report server locked down so that the users can't change the defaults, but I now want to empower them to maintain this on their own. Here is my dilemma. When you have the available parameters set up to pull from a query, the defaults on the report server have to be keyed in manually, which is not an option. The only way to get a check box there, is to explicitly specify the available values.I need my available values to be database driven and I need to be able to select my defaults on the report server using check boxes.
View 5 Replies
View Related
May 12, 2010
I have a parameter that chooses its available items from a query (with a label and a value column). I set the default for the parameter to the a particular value.
It works in Preview from design mode, but when I deploy it and run the report, it does not set the default.
View 5 Replies
View Related
Jan 7, 2011
Currently, I have a report that takes two parameters: StartDate and EndDate.
I would like to schedule the report to run on a Daily, Weekly, Monthly or Yearly basis, but this doesn't work too well with StartDate and EndDate because the parameter is static. What is the most elegant way to implement this change?
View 5 Replies
View Related
Aug 27, 2015
I have a QA Deployment Date field that is being returned in a custom report I created. I also found a sample date range parameter:
What I want to accomplish:
I want to select a From and To Date and filter the report to only display the rows that have the QA Deployment Date within the selected range.
For example.. I want to select From Date (8/1/2105) and To Date (8/31/2015) and I only want to return only the results that have a QA Deployment date between that selected range.
View 3 Replies
View Related
Oct 26, 2015
I have a report that uses several filters including a from and to date filter, I have a field named TimeLastMod which is a Timestamp. I am extracting the From and To dates from this field using Select format(TimeLastMod,'MMM') as FromMonth,format(TimeLastMod,'MMM') as ToMonth From Eventlogs syntax.
These I pass on to a parameter and eventually to a tablix filter in an between opeartion. When I run the report, the records returned by the report is not what is expected as it sometimes returns an extra months data e.g., using between Aug and Sept will return october data as well.
View 5 Replies
View Related
Dec 2, 2014
I am creating matrix report with grouping on WEEK and Fiscalyearweek,I need to calculate of difference between FY14W01,FY15W01 ande percentage of those..how to calculate in ssrs level.
View 13 Replies
View Related
Sep 7, 2015
How to call Boolean/Text parameter in SSRS Query.
Parameter (Cust )Properties:
My Query:
SELECT dbo.incident.incident_ref, Customer.cust_n,incident.date_logged FROM
incident INNER JOIN Customer ON incident.incident_id = Customer.cust_id
WHERE incident.date_logged BETWEEN @date_from AND DATEADD(day, 1, @date_to)
I need to use a condition here to display customer based on my selection in dropdown list (Include ABC )
View 5 Replies
View Related
Aug 20, 2015
Is it possible to use a parameter in a ldap query using the ADsDSOObject provider? I keep getting an error "The ICommandWithParameters interface is not supported by the "ADSDSOObject" provider". Command parameters are unsupported with the current provider.
I don't have a linked server on my DB server to Active Directory so I'm just querying in the SSRS report design. Here is my query for my dataset. If I hard code an example it works. Just doesn't work when I pass a parameter. I've tried making it an expression (= sign), Tried several syntax's, Tried everything I can think of. Is this possible? or do I just need to push for a linked server?
="SELECT sAMAccountName, displayName, distinguishedName " +
"FROM 'LDAP://DC=xxxx,DC=xx,DC=xx,DC=xx,DC=xx,DC=xx' " +
"WHERE objectCategory = 'Person' " +
"AND objectClass = 'user' " +
"AND memberOf = '" + @GlobalGroup + "'"
View 3 Replies
View Related
Dec 3, 2015
I would like to know how does subreport accept multi value, and how should i modify my expression so that the sub report will display correctly.
My main report will pass dynamic number of account number to sub report, it depends on how many account number a person has. I have my sub report parameter Data Type set as "Allow multiple values" and the visibility is "Visible".
Currently, I am using the following expression to try to pass multi value from main report to sub report. I had tested the result of that expression. It is showing the following result when there are 3 account numbers to pass to sub report.
1534896
1563498
1593548
With that expression, when only one account no is pass from main report to sub report, the sub report will display the result. But when more than one account numbers are passing over, the sub report display nothing, it is blank.
--expression
=Join(LookupSet(Fields!PersonNo.Value,Fields!PersonNo.Value,Fields!AccountNo.Value,
"accounts"),""
+ VBCRLF)
*Note: I cannot put the account number into a multivalue parameter in the main report and pass from that parameter to sub report. I know this will workd BUT I had tried that by setting the default value in the multivalue parameter to the dataset that consists of the account number. That involves 100 thousand plus plus account numbers and it will for sure over the limit of 8000 characters.
View 2 Replies
View Related
Oct 25, 2015
I have used my parameter value in where clause of my dataset control SQL query. When I choose a single value in my multiple-value parameter then I get output as expected. Hovewer when I choose multuple values I get an arror:
Only one expression can be specified in the select list when the subquery is not introduced with EXISTS.
----------------------------
Query execution failed for dataset 'DATABASE'. (rsErrorExecutingCommand)
----------------------------
An error has occurred during report processing. (rsProcessingAborted)
I am convinced that it's a syntax problem. Is there a way I can change syntax of data output from query:
select @parameter
I need output to be like: value, value, value ... etc.
The dataset control query looks something like the following:
select
ID,
a,
b,
c,
d
from DATASET.dbo.Table
where ID in (select @parameter)
I have been searching through google for weeks to solve this and got this far and got stuck. Is it possible at all to achieve what I am looking for?
View 4 Replies
View Related
May 19, 2015
We have 1000s of SSRS reports hosted on the SQL 2008 R2. All reports are supposed to have all parameters "hidden". Random reports have been reported to expose the parameter when developers accidently deploy to test servers. Is there a way to identify the reports and the parameter property (Hidden, Visible, Internal) from the Report server Database?
I checked executionlog2 but can not find the parameter property.
View 7 Replies
View Related
Aug 6, 2015
I am facing an issue in TABLIX FILTER . I have a table having a column with dates like
01Feb2015
03Jun2014
I need to add a filter in SSRS tablix to get the dates < 01Mar2015
How can I add it in tablix filter as if i directly use my column name and filter value as 01Mar2015 it is not giving results
Secondly, I have another column with date like : 2015-02-04 00:00:00.000
I need to filter the same in another tablix for dates < 01-Mar-2015
I tried this in expression to convert it into string
=Format(Fields!Last_Date.Value, "YYYY-MM-DD")
And used 2015-03-01 in filter but it did not work
If I dont use format, ssrs gives error that tablix cannot compare datetime and string...
View 4 Replies
View Related
Apr 15, 2011
Search option in the filter of SSRS, like in the filter let say for the category parameter we have 100 values , instead of scrolling down for the required option. can we have an option for search in the filter so that when we type certain value it will come up for example in the Google website, when we type the value in the search bar in the drop down we will get the option..same as that...........can we do in the ssrs.
If yes how can we achieve? Do we need to write any .net code?
View 5 Replies
View Related
