When I go to Save As Report it doesn't allow me to create a new directory (folder)
Here is where the directory (folder) needs to be created: gdgdb01preportserverProduction.
Where can I create this directory (folder)?
We have the following requirement :
1. In daily basis auto loop through each item in the invoice table.
2. passing invoice number into a Summary SSRS report as parameter.
3. Auto download ALL generated PDF reports into a window folder with a special file name format i.e. <INVOICE_NO>_<DATE>.pdf
how to achieve this via SSRS, Store Procedure or Power Shell?
I have old sql server 2008 with reporting service and new one 2012 version and I need to move single report folder from old server to new server. Is there any tool or script can make that possible.
View 5 Replies View RelatedLet's say I have an rdlc report for customers, and it has three sections with subreports:
CUSTOMER_INFO (name, phone, e-mail)
ITEMS
OBSERVATIONS
As the page only has 21cm and the report grows horizontally, I need to repeat the WHOLE report with all of its sections after every 4 customers. So if I have 5 customers, there would be three pages(let's say every subreport takes 1 page) for the first four customers, and then another three pages(with every section once again) just for one customer.
Is it possible? It doesn't seem somehing out of the ordinary, but I can't figure how to make it work. Everytime there is more than 4 customers, the report breaks its layout trying to accommodate the records in a new table below the tables of each subreport.
The expected result would be to bring all of exceeding data to new pages.
How to make SSRS report page size dynamic, or in a way where viewer can set it to the size they want?
Set to 0
I have an issue as to where only some reports are visible within Report Viewer url. But if I navigate to the path of the rdl's there are many more present that should be visible through Report Viewer. The client was recently upgraded, and I seem to have all out of box roles and permission levels yet can only see some of those reports, as if some were manually copied to this folder location at a later point and perhaps some user job needs to be run to reflect import those additional rdl's?
View 2 Replies View RelatedBasically i have 3 images capacity per record in my asp.net application. In there i am saving the image path with record id in database and image in my application folder.
Now i am creating SSRS Report in Report builder . In there i have taken one image control to show the images. In the Image properties in report builder i have chosen database under the select the image source field. then inside use this field i have chosen image url and in use this MIME Type i have selected image/jpeg. Now i have saved this report in report server folder.
Now while calling in .net web from through report viewer control. It is opening the report but wont showing the image.
I am trying to create a basic report in SSRS, with 6 columns but then we receive an excel spreadsheet with different account numbers daily and I am requested to create a report based on those account numbers. so how can I create a shared folder for the users to drop their excel spreadsheet there and make my SSRS only filter the result set based only on those account numbers?
View 5 Replies View RelatedIs it possible to make an SSRS report print to pdf and save itself automatically every time that report is run. Basically the user won't notice anything different, but on the back end a pdf is saved to a network location?
View 3 Replies View RelatedThere's a new SSRS 2012 environment which was setup with My Reports folder to each user enabled. I know I'm supposed to see a Users Folder in the Report Manager root, I'm setup as a system administrator (under Site Settings) and also have content manager rights in the root directory and I still don't see the "Users Folders" ...the only way I can see that is if they give me admin rights in the server SSRS is installed. What am I missing here, is this supposed to be like that?
View 5 Replies View RelatedI have few reports under different folders in Report Manager. Is there a way to set the data source for the whole folder rather than each report individually? There is also a folder where reports generate dynamically. Since the report project doesn't exist anymore, I can't set the data source through code. How can I set the data source for the whole folder?
View 7 Replies View RelatedI have multiple reports, in multiple folders, that have fields in them and those fields are set to Navigate to the same report. I'd like to store a single copy of the report being navigated to in one hidden folder.
Example
Report "Inventory Value" in folder Accounting has the Item Number field set to navigate to the report "Item Details"stored in folder Linked Reports
Paths
//ReportServer/Accounting/Inventory_Value
//ReportServer/Linked_Reports/Item_Details
Is there a way to do this?
I Need to make RDL report dynamically.Is there any library or dll that i can use?
I am Using vb.net
Is there any way to get the report toolbar using SOAP Api in SSRS reporting.
View 6 Replies View RelatedI have done the following and a domain user would not access report created a login to the SQL server to the user (this SQL Server is where data source DB is)went to site setting in Report Manager and made this use a system userright clicked on report folder and made this user in the browser roleeven checked that in the report in question, the user is already in the browser role Still the user would not access the report! "User .......... does not have required permission" is the error message I am getting.
View 6 Replies View RelatedI have written a report visual studio. The report has 10 multi-value parameters that pull data from their individual data sets within the reports. When running the report from within Visual Studio it renders fine. There are no errors reported, only a warning related to a pathname I have use to retrieve image data and display on the report.Deployment of the report is error free.When I view the report I briefly get the "Loading" splash window, but then nothing. None of the headers or static text is displayed. The results window is blank.
The report defaults all the parameter values. In trying to debug the issue I have found by reducing the number of parameter values the report will render. Once I have all the values added, the report does nothing.Below is the query being used for the report. The where clause in the query shows the parameters being used and the syntax.We are running on Windows Server 2008 R2 and SQL Server 2008 R2.
Ralph
SELECT RTRIM(a.ITEMNMBR) AS Style, RTRIM(a.ITEMDESC) AS Description, a.ITMSHNAM AS UPC, c.LOCNCODE AS Store, d.LISTPRCE AS ListPrice, a.CURRCOST AS Cost,
a.USCATVLS_1 AS [Main Category], a.USCATVLS_2 AS Market, a.USCATVLS_3 AS [Alternate Retail], a.USCATVLS_4 AS Country, b.ITEMXTRAS_1_Type AS Type,
b.ITEMXTRAS_2_Finish AS Finish, b.ITEMXTRAS_3_SubCategory AS SubCategory, b.ITEMXTRAS_4_Department AS Department,
[code]...
I have a ssrs report having 2 tables in with 4 columns in each. When I go to export option in preview I can see all data coming in one excel sheet, But I am trying to get 2 tables in 2 different pages in Excel when I export.First page of excel comes with first table data with 4 columns and second page of excel comes with second table data with 4 columns .
View 2 Replies View RelatedI'm wondering how to print a SSRS report without bringing up a report viewer. Is there way to print(PDF format) the SSRS report in the web application( .net ) directly from the "print" button without bringing up a report viewer?
View 2 Replies View RelatedI am trying to develop a report from cube,and it has one drill through report.when i click on sales amount field on main report,then it open the drill through report with details.Here i passed the **(category,subcat,product)parameters(Cascaded)** to drill through report in action part of main report.In my main report i have two columns .
columns are **Level** and **Salesamount**.
Values are like
**[-]category** **100**
**[-]subcat** **50**
**product** **30**
when i click on 100, parameters are passed & it open the detail report correctly, but when i click on 50,the values for subcat parameter is not getting values in detail report and same as the product also.
Here i used the expressions in parameter values
**pCategory**----iif(inscope(category),!fields.category.value,split(join(Parameters!category.value,","),","))
**psubcat**----iif(inscope(subcat),!fields.subcat.value,split(join(Parameters!subcat.value,","),","))
**pproduct**----iif(inscope(product),!fields.product.value,split(join(Parameters!product.value,","),","))
How do I get data on my linked report based on my grouped subtotal and grand total from the main report. The subtotal and grand total are calculated columns.
I have a 3 columns in my matrix in the SSRS summary report. Actn_COAST, ActnCITY and NumbOfAccts.
The following is code for my summary report. The results are shown below.
SELECT Distinct ActnCITY, Count(ACCT) as NumbOfAccts,
CASE WHEN ActnCITY in ('NY', 'OH', IN, 'NJ', 'SC', 'NC') THEN 'EAST COAST'
WHEN ActnCITY IN ('CA'. 'NV', 'UT', 'WA', 'OR') THEN 'WEST COAST'
ELSE 'OTHER'
END AS Actn_COAST
FROM tbl1
where ACTNDATE between @STARTDT and @EndDT
Code for my detail report contains the following SQL
SELECT * FROM tbl1 where ACTNDATE between @STARTDT and @EndDT AND @ActnCITY = ActnCITY
I have linked my report based on the NumbOfAccts column. I am able to get data if I click any of the NumbOfAccts values related to the state I want. However when I am not sure how to make the subtotal and grand total work. I want when I click on the subtotal of either coast, I should be able to see records of that coast e.g., if I select 37 I should be able to see all the records in East Coast. If I click on the Grand Total, I only want data related to those 2 coasts.
Is there a way to subscribe SSRS report using dynamic parameters for email and trigger the report from autosys job so that report should generate the exact time the job is triggered.Let me describe, my SSRS report should be triggered on success of one autosys job. i need to send email parameter and time of report schedule from this autosys job.
View 3 Replies View RelatedHi,
I'm having problems navigating from one report to another one if the second report has a multi-valued report parameter. When I navigate to the second report, I don't pass any parameters, but I get an error "parameter is missing a value" for the multi-valued report parameter. I have it setup as allow "multi-value" and "blank value". Any idea what the issue might be?
Thanks.
How to display the logo in middle of report header , The logo is embedded in the Image folder . The column of the report are static. we are using SSRS 2008
View 6 Replies View RelatedI have a report which works fine with visual studio but when i uploaded the same into report server and tries to access it through IE or chrome or anything its dam slow.
how to get rid of this issue?
I need to create a SSRS report using the Warehouse tfs_warehouse DB Report need to be drill down on WorkItemType Parents and child values. So, If we click on Product Back Log Item will get all the tasks inside it and so on....
------->Product BackLog items
----------> Bugs Or Tasks
-----------> Tasks
I have done research and found out how to do it in OLAP cube ..but still can't figure out the TSQL query to be used.Found one of the query on forum:
SELECT * FROM DimWorkItem DWI
INNER JOIN FactWorkItemLinkHistory FWILH ON DWI.System_Id = FWILH.TargetWorkItemID
WHERE FWILH.WorkItemLinkTypeSK IN (SELECT DWILT.WorkItemLinkTypeSK FROM DimWorkItemLinkType DWILT WHERE DWILT.LinkName = N'Child')
AND DWI.System_WorkItemType = N'Task'
AND DWI.System_Rev = (SELECT MAX(DWI1.System_Rev) FROM DimWorkItem DWI1 WHERE DWI1.System_Id = DWI.System_Id)
AND FWILH.SourceWorkItemID IN (SELECT DWI2.System_Id FROM DimWorkItem DWI2 WHERE DWI2.System_WorkItemType = N'Bug');
i just clicked on Advanced mode in Column Group, and then in Row Group Side i set Fixed Data=true for first top static. I'm using local report not server report and i'm displaying that local report in Reportviewer. Now also its not working....
View 6 Replies View RelatedWe are trying to use reporting services to execute a url when the SSRS report is executed. For example when I execute a SSRS report I would like the report to automatically access [URL] (as an example). The reason we are doing this is we want to access another reporting application but record the number and times of access via the reporting services execution tables/views. Is this achievable by putting some code in the Report properties. Can you open - execute url and then close report via some code.
View 3 Replies View RelatedI have below query which is working fine in SQL but if i use same query in SSRS dataset then it is not working at all.If i put only one condition in where clause then it works but if i put multiple conditions then it does not works in SSRS and through error "data is not available".
SELECT id,
DATEDIFF(DAY, Created, BMTRequestReviewDate) AS 'EvaluateDays',
all code goes here
FROM [dbo].[SBWT_Data]
WHERE
upper(Status) not like '%XX%'
AND upper(Status) not like '%DELETED%'
upper(Status) not like '%CLOSED%'
---OR
WHERE Status NOT IN ('90 - Closed','XX - Rejected','XX - Request Rejected','XX - Deleted')
As you can see in code i have tried with both where conditions but it is not working. It seems that SSRS does not supports multiple conditions for same field.
I am having report like below
Manager Name ClientName Procedure count
Paul Infi P1 3
P2 3
P3 3
Hun wallmaart P1 1
report group on ManagerName.
How to get the count column.
how can i create a report like this format in SSRS ? In this format grouping will be applied on Phase code and tablix/matrix will be repeated the same way like shown above.The headers must repeat on the next pages too.Web Developer / Web Designer / Software Developer / UI Designer
View 5 Replies View RelatedI am trying to get my ssrs report in an excel. I want the report to be displayed in a single excel sheet, however, I am getting multiple sheets. I have even tried the page break functionality and used the
expression(=IIF(Globals!RenderFormat.Name="EXCEL",TRUE,FALSE) in the tablix properties--> pagebreak--->disabled option.
The same is not working. what am i missing here?
No I have a map of China to show the sales of each province in SSRS (SQL Server 2008 R2)
I want to add logo of my company and some remarks about the data on map.
I have tried to add logo as an image then drag it on the map, but when it showed up the logo just outside the map.
SSRS report exporting to pdf generates this error
<detail><ErrorCode xmlns="http://www.microsoft.com/sql/reportingservices">rrRenderingError</ErrorCode><HttpStatus xmlns="http://www.microsoft.com/sql/reportingservices">400</HttpStatus><Message
xmlns="http://www.microsoft.com/sql/reportingservices">An error occurred during rendering of the report.</Message><HelpLink xmlns="http://www.microsoft.com/sql/reportingservices">http://go.microsoft.com/fwlink/?LinkId=20476&EvtSrc=Microsoft.ReportingServices.Diagnostics.Utilities.ErrorStrings&EvtID=rrRenderingError&ProdName=Microsoft%20SQL%20Server%20Reporting%20Services&ProdVer=11.0.5343.0</HelpLink><ProductName
[code]...