I am using ssrs 2012 using sql server 2012. I have grouped by project name in the header now it is repeating horizontally i need to repeat it by vertically using project name grouped by column.
I need this like below :
We run 2014 enterprise. I tried this with both table and matrix controls to no avail.
In the table scenario, I drag the table control over, instruct ssrs that a group name will go into column 1 and a sales figure in column2. Then I highlight the sales figure cell, add a column group on month number and generate my report off some june and july data.
ssrs understands that the months now expand horizontally but the rows alternate one with june filled in (blanks in july) and the next with july filled in for the same group name. I believe I got all my sort by conditions set but am not sure.
I tried all sorts of combos in the tablix and group properties before giving up.
I am trying to export report to .CSV , but I am unable to export grouped data, instead to grouped data , it exporting detail data,for example my grouped data in matrix is as below , I need to export below data to .csv
column1 colum2 year amount
1 1 2011 $1.0
2 2012 $2.0
3 2013 $3.0
2014 $4.0
but, I am getting like below-
column1 column2 year amount
1 1 2011 $1.0
1 2 2012 $2.0
1 3 2013 $3.0
1 3 2014 $4.0
Hi,
Could someone help with the following problem, I what to create a cross-tab report of the following data, grouped by Colour:
RAW DATA
Name
Colour
Sarah
Black
Kim
Red
Jane
Black
Jane
Pink
Robert
Yellow
Tom
Green
Tom
Black
Billy
Black
Sarah
Black
Sarah
Black
Tom
Pink
Kim
Pink
Robert
Black
Group Colours by Names Report
Number
Proportions %
Name
Black
Green
Pink
Red
Yellow
Total by Name
Black
Green
Pink
Red
Yellow
Billy
1
1
100.00%
0.00%
0.00%
0.00%
0.00%
Jane
1
1
2
50.00%
0.00%
50.00%
0.00%
0.00%
Kim
1
1
2
0.00%
0.00%
50.00%
50.00%
0.00%
Robert
1
1
2
50.00%
0.00%
0.00%
0.00%
50.00%
Sarah
3
3
100.00%
0.00%
0.00%
0.00%
0.00%
Tom
1
1
1
3
33.33%
33.33%
33.33%
0.00%
0.00%
I want to produce a Matrix cross-tab report, like the above, within Reporting Services. Any suggestions welcome
Many Thanks,
Radha
I got the following code to add a column in a matrix with a variance:
IIF(IsNothing(Previous(Sum(Fields!Amount.Value))) or Fields!year.Value=First(Fields!year.Value,"Category") or Previous(Sum(Fields!Amount.Value))=0,nothing,
(
(Fields!Amount.Value)
/Previous(sum(Fields!Amount.Value))
)
)
This code works fine, except that the first row of the matrix shows an #error
This happens with each matrix where I use this expression. A warning emerges:
rsruntimeerrorinexpression the value expression for the textrun Textbox43.Paragraphs[0].TextRuns[0]' contains an error.
Attempted to divide by zero.
The strange thing is that the part
Fields!year.Value=First(Fields!year.Value,"Category")
should prevent an error and I expect it to show 'nothing'
An screenshot of the table. (each color is a different category. Each row stands for 2013, 2014, 2015)
As you can see, all other 2013 rows show a blank cell, except the first row.
I have one matrix with multiple row & column groups which is not looking nice.
See the below image. The reason for having a Matrix is they can create any no of Tests.
In the above image i have two row groups Test Type and Test Date and column groups as TestDesc and my required format is .
I am creating a Matrix report using SSRS/Visual Studio 2008 as below:
Jan
Feb
March
April
May
June
July
Aug
Sept
Oct
A & B are customers. The values represent sales for each month.I have got most parts in place except the Month are displayed in random order (1,10,2,3,4,5,6 and so on).I have tried the option to create a calculated column with month numbers and change group properties but that did not work.how to get it to sort display as 1,2,3,4,5,6,7,8,9,10.
I have a table in which records are inserted daily and with them i am storing the dates also. Now in SSRS i need to show the data for one week . The format should be like :
<style type="text/css">
.tg {border-collapse:collapse;border-spacing:0;}
.tg td{font-family:Arial, sans-serif;font-size:14px;padding:10px 9px;border-style:solid;border-width:1px;overflow:hidden;word-break:normal;}
.tg th{font-family:Arial, sans-serif;font-size:14px;font-weight:normal;padding:10px 9px;border-style:solid;border-width:1px;overflow:hidden;word-break:normal;}
[Code] ....
In above example Business Name , Phase, Activity will repeat lonely but its work description will be generated in next section according to that business name and that date. How to achieve this task ? I have referred : [URL] ....
I am new in SSRS 2012.I have created a rdl,in this rdl, am having a row group.In this report, other two columns has multiple rows and some rows having data and some other rows doesn't have data.So I want to create rows when the row of that particular column has any data or need to merge vertically with the row having data and row don't have data of particular column along with the Common Row Group Data
View 5 Replies View RelatedI have a Matrix with dynamic columns. I am grouping Matrix on one column group. I am trying to have a different color for every group. I hvae so far, three groups. How can I do that? A note, there is no data for every column group in every row.
View 7 Replies View RelatedI am building a report with 3 tablixs using SQL Server 2008. Tablix 3 is long and spans over 3 pages. I am trying to get the header for the to remain visible on all pages and as we scroll through the end of each page. Now this is a frequently asked question and I have found the approach to achieve the desired results. All approaches involve clicking in the advanced mode of the row and column groups to modify the static and dynamic groups.However, when I click the advanced mode there is no effect. I have attached a picture of the design mode. The tablix3 is grouped by the Department column.
View 9 Replies View RelatedI have an SSRS report I'm working on. I have Row Groups plus details.
A) How can I get the row group headers to repeat on every line?
B) I would still like to use the drill down, click the plus sign, and have that work when I export to excel.
Here is the report header: URL....My first thought was is there a way simply to cause the header to repeat. I cannot find that anywhere to do that.My second though was to split the cells and copy the fields to all the rows.Here is the same header with split cells:URL....two problems.
A) I cannot split one cell; See the "X" in the second capture.
B) How do I still hid the rows until I drill down.
Let's say I have an rdlc report for customers, and it has three sections with subreports:
CUSTOMER_INFO (name, phone, e-mail)
ITEMS
OBSERVATIONS
As the page only has 21cm and the report grows horizontally, I need to repeat the WHOLE report with all of its sections after every 4 customers. So if I have 5 customers, there would be three pages(let's say every subreport takes 1 page) for the first four customers, and then another three pages(with every section once again) just for one customer.
Is it possible? It doesn't seem somehing out of the ordinary, but I can't figure how to make it work. Everytime there is more than 4 customers, the report breaks its layout trying to accommodate the records in a new table below the tables of each subreport.
The expected result would be to bring all of exceeding data to new pages.
I have a report which shows up as below,
Product Type - A
Product Name - 1
Product Price - 1
Product Name - 2
Product Price - 2
Product Type - B
Product Name - 1.1
Product Price - 1.1
Product Name - 2.1
Product Price - 2.1
Product Name - 3.1
Product Price - 3.1
Similarly i have different Product types and product names and its prices underneath each product type. As you can see, there might be varied number of products under the product type so i am grouping it on Product type. The issue is when i export the report to pdf or word, when ever we have a big group of Product Type( example: Product Type X and it has 10 different Products under it) along with few other smaller groups, the big group tends to jump on to the next page of word or pdf and leaves a big empty space in the previous page. Any way i can break those big groups and fit as many as we can on the page and the rest should follow onto the next page rather than leaving the previous page with blank space.
Hello,
I have a drilldown matrix report similar to the one below...state - drilldowns to sales person which lists the sales for a particular product...in each state there are usually more than 10 names, however i would only like to see the TOP 10 name appear for the sale off that product
My SQL is as follows
SELECT Sales,Consultant, ProductNo, State, Sum(Value) As SumOfValue,
From tblSales
where productNo = 2000
ORDER BY SumOfValue Desc;
If I put in the select TOP 10 it returns only the top 10 for all the states however i need the top 10 off EACH state, is there a way to filter this..or better yet a sort button which will show the top 10 only.
Sales for product
NSW charlie brown 25
bob snow 20
william tell 10
....50 sales reps..etc
WA Charles manson 34
fiona apple 20
peter 1 ....more sales reps etc
I am wondering has anybody ever created a Matrix in a report grouped by Day Part (10-2 Morn, 2-6 Aft, 6-10 Eve etc) and Date?
I would like to see a report with an output such as
13/02/2006 14/02/2006 Total
Morn Aft Eve Morn Aft Eve
Mr A 2 4 5 2 6 2 21
Miss B 8 8 1 1 4 5 27
I have a DB table which records the datetime each time a viewer changes TV channel. The report is a summary by user of each channel change By Day Part with Each Date
I can do this easily enough by just grouping on Date but now require another level of detail.
I want to repeat line on each page of report on PDF while using 2 columns on report. The problem is that if i use table border it will also repeat after second table. i want a line between two tables.
View 14 Replies View RelatedHi,
View 3 Replies View RelatedI'm looking for help on how to do something like this in Reporting Services. I'm using a Matrix, but always messes up and doesn't put the values where I want them to be.
Thanks alot!
I am having difficulties with what seems to be a common issue. I want to produce a trial balance. The first row of the tablix would include fields: AccountNo, Description and startingbalance from a dataset called tb. Below that, I would like to draw from a dataset called Entries with multiple rows having fields: AccountNo, Desc1, Desc2, Debit, Credit and Balance. Balance in the Entries table is already computed from the starting balance and the entries above. There are many AccountNo's with corresponding entries.
How do I do this?
I am having trouble with calculating AVG in a matrix. I have done the subtotal but I would like to know how to calculate the Average. I would also like AVA below the Total.
Link : [URL] ....
I have also added an image oh how the matrix looks like.
Is it possible to repeat the row labels for matrix reports where there are multiple groups. So if the matrix report rows are department,division,employee then have all three labels show up on each row not just at the breaks. Cannot seem to find a way to do this. thanks
View 1 Replies View RelatedHi every one,
Could you please anyone tell me how to have static and dynamic columns in a matrix?
We can add static columns by right clicking detail text box and add column. But it will repeat for each column group. I need static columns in the dynamic columns level itself.
Thanks in advance!
Seems simple. People working in departments with different types of hours (regular, overtime, vacation... thus the grid which pivots hours in rows to the appropriate columns). I want to subtotal by department, but whenever I try to add totals after to that group, I just get a grand total. No subtotals. Why?
View 8 Replies View RelatedWhat I want to do is have a matrix that looks something like this
Jan Feb March
Person A 1 ↑ 2 ↑ 3 ↑
Person B 2 ↑ 2 ↔ 2 ↔
Person C 3 ↑ 2 ↓ 1 ↓
So basically it checks the previous months value and uses that to determine which indicator to use ?
I have a matrix report and as per the requirement, I must format the row colors. First row must be no color and second row must be light blue. This color formatting would repeat for remaining rows in the matrix. I tried to select the entire row in the matrix, selected "Background Color" option and in "Expression" window, I entered "=IIf(RowNumber(nothing) MOD 2, "White","LightBlue")".This resulted in the color formatting of columns in the matrix report.
View 2 Replies View RelatedHi all
I have taken Marix control in my report,But i am unable to increse Rows and cols.
How can i make it?
Reagards.
I am new to matrixes and I have created a dataset which I would like to populate into an expanding / collapsing matrix.
The purpose of the report is to show a list of pallets and their respective stock adjustments. I have laid the matrix out as follows...
I have spent the entire afternoon playing around with this and searching Google, but as yet, I have been unable to get the matrix to display more than 1 record per pallet. Each of the pallets below have multiple adjustment records, yet the report will only display the first one...
If I assign the dataset to a table, it displays as expected.
My stored procedure give me top 3 activities. My SSRS report design, I am able to display first activity when I select the Activity field from the Stored procedure, how to display 3 activities for each category.. Also I need a solution to sort the categories based on the requirement below.
View 2 Replies View RelatedI am creating a matrix in which row color changes alternately(1st row white second row blue and so on .) now i am calling this matrix as a sub report in other report and i had applied grouping on that row in which this MATRIX is called the problem i am facing is in first sub report 1st row is coming in white color while in second sub report 1st row is coming as blue color background And so on...
Why so is happening as i want 1st row as white and second row as blue i all sub reports .
Hello Everyone,
I have been tasked with creating a report using Reporting Services from an excel report that was wasting a lot of manual effort and time. I have searched boards and I am having the hardest time trying to find a way to do the following in Reporting Services within a Matrix:
Spring Summer Fall
2005 2006 2007 %Change 2005 2006 2007 % Change 2005 2006 2007 %Change
Reponses 219 310 410 100 100 200 300 100 2000 3000 200 -2800
FRC% 102% 103% 200% 97% 23% 25% 10% -15% 20% 32% 10% -22%
===========================================================================================
I can not find out how to do a percent change (the column in red) subtracting just the final or most right two columns of the resulting matrix columns, not an average or some other function over the entire row....
Please help, I know others have had the same issue...
Thank You,
I need to design a report like as below
Location jan feb mar april total %
abc 1 2 1 1 5 % calculated value
ddd 1 1 1 1 4 % calcualtedvalue
------------------------------------------------------------------------------------------------------
total 2 3 2 2 9 total(%calculated value)
i was able to get everything except last column. i am using Matrix control. can any one help me how to another column after sub total in matrix control.
I have one Matrix Report developed in BIDS(2008R2). If I export this report into Excel sheet exact structure what i developed in BIDS its coming. But If I exported into CSV I am loosing Structure and Columns showing as Rows.
View 2 Replies View Related