I have one tablix and this tablix has 2 parts(chart and table with numbers). Table with numbers uses Dataset1 and for chart I created another, 2nd dataset. How to get information from second dataset?
View 4 RepliesI have to create tablix report using data from 2 datasets. The data source for one of the dataset, DataSet1 is Microsoft SQL Server and the data source for the other dataset, DataSet2 is Excel.
I have to pic 3 columns from DataSet1 and one column from DataSet2.
I tried using a lookup function Expression:
=Lookup(Fields!ProgrammerName.Value,Fields!ProgrammerName.Value,Fields!Skill.Value, "DataSet2")
The above expression is throwing #Error on that column in the output.what should I do?
I have two charts which are based on their own separate datasets. One chart shows data aggregated by MONTH, the other chart shows data aggregated by WEEK. I have put both of these charts inside a rectangle and set their visibility based on whether or not there is data returned by their respective datasets. This part is working just fine.
However, I have added a tablix to the report, deleted all columns and rows leaving only one remaining row/column so it looks like a textbox. This tablix is sitting on top of the two charts. The problem i'm having is that when both charts return no data and they do not show up in the report, the tablix still remains visible. I need to set the visibility but based on a condition between the two different datasets behind each chart.
Here's what I need: If ONE of the charts returns data, then I need the tablix to be visible. If neither chart returns data, then I need the tablix to be invisible. I'm trying to write an IIF statement comparing the two datasets but I get inscope errors. Isn't it possible to compare values which are contained in two separate datasets in SSRS?
Seems like something like the following logic should work:
IIF(CountRows("Monthly_DataSet") > 0 OR CountRows("Weekly_DataSet") > 0 , FALSE, TRUE)
Obviously the above expression will return syntax errors, but you'll get the point as to how i'm thinking. How can I set the visibility of the tablix based on these two charts?
We have a report that was created in SSRS 2008 R2 that has 3 tables with different datasets that share a common ID that I want to use to group them.
If we run the report passing only a single value for the grouped parameter then the report works perfectly. What we need is for this report to allow multiple values to be selected for this parameter and for the report to run as if the user had selected each value one at a time and run the report with page breaks in between. Currently, when we pass multiple selected values for the grouping parameter the report displays all values for table 1, then all values for table 2, then all values for table three as below:
Table 1:
Detail rows for Group Param Value 1 ...
Detail rows for Group Param Value 2 ...
Detail rows for Group Param Value 3 ...
....
Table 3:
Detail rows for Group Param Value 1 ...
Detail rows for Group Param Value 2 ...
Detail rows for Group Param Value 3 ...
But we want it to render like this:
Table 1:
Detail rows for Group Param Value 1...
Table 2:
Detail rows for Group Param Value 1...
Table 3:
Detail rows for Group Param Value 1...
[code]....
The page breaks are needed so that when the report is exported to excel each individual report (by group param) will be on its own uniquely named tab.The report must export cleanly to excel and currently does for the single value passed.
How do I hide the filter I have in a tablix from showing up in the report
[URL]
I have a report I'm designing where, as a simple SQL report viewed only on a screen, it was irrelevant how wide it was. However, now I've been asked to duplicate this report in SSRS and to include the option to print it out.
Well, the problem is, as it stands - with 8pt font, even - it will require a sheet of paper about 24" wide to get all of a single row to print.
So, I'm trying to create a Tablix that will split the data into two sets of header/detail rows in the same Tablix. Any workable solution that doesn't involve writing an app in basic or C.
Right now I have the following expression in mind.
=IIF(Fields!CoolantLevel.Value <> "", "CoolantLevel:" & Fields!CoolantLevel.Value, Nothing)& vbcrlf &
IIF(Fields!Horn.Value <> "", "Horn:"& Fields!Horn.Value, Nothing)& vbcrlf &
IIF(Fields!DriveBrakes.Value <> "", "DriveBrakes:"& Fields!DriveBrakes.Value, Nothing)& vbcrlf &
IIF(Fields!ExhaustSystem.Value <> "", "ExhaustSystem:"& Fields!ExhaustSystem.Value, Nothing)& vbcrlf &
IIF(Fields!Turntable.Value <> "", "Turntable:"& Fields!Turntable.Value, Nothing)& vbcrlf &
IIF(Fields!SoftTouchLimit.Value <> "", "DriveBrakes:"& Fields!SoftTouchLimit.Value, Nothing)
I need the tablix that is not displaying data not to be as big as the one's that are in lighter terms.
Here is an image
How do I decrease the size of the tablix if no data is displaying so it co inside's with the rest of the tablix as in this image.
I have
1. Right-click the tablix and select Properties.
2. Click Visibility.
3. Select Show or hide based on an expression.
But I return, A hidden expression in textbox returned a datatype that is not valid.
I don't want to hide or show based on the result I just require that the tablix that doesn't return data stay's in proportion with the rest.
How do I use an expression to position a tablix on the report?
View 4 Replies View RelatedI have simplified my question. For complex presentations of data it appears to me that the best practice is to put complicated code into a stored procedure that will make most of the formatting decisions, and keep the SSRS work in the report designer as simple as possible.
The following text is from the original question. I have an SSRS report which contains 2 tablixes. Each tablix has a different dataset coming from separate stored procedures. Currently, everything works good; the user selects one customer (customer A) to display the one page report for; data for customer A for the 1st tablix may contain 7 rows, and data for customer A for the 2nd tablix may contain 4 rows. User prints report, then chooses customer B which may have a different number of rows for each tablix.
I would like to give the user the option to select "All Customers" to display the report for all customers, one page per customer and I currently do not perceive that there is a way to paginate the report; one page per customer. When I pass in "All Customers" to the 2 stored procedures I get all of the correct data back; sorted by customer; so I can do some sort of page break on a row group on the customer name column, but I have 2 tablixes of data.
I have a report I'm trying to modify for a client that has two auto-grow tablix. We want the second tablix to start after the first one completes, however the first tablix will overwrite the second one if it contains multiple rows, rather than pushing it down. How can I control this?
View 2 Replies View RelatedI've got a report consisting of nested list items and a tablix inside the last list.
As seen below - the tablix seem to shift the "Brand No:" textbox details to the right when it becomes bigger. How do I prevent this? Is there some anchor property of the text boxes that link them to the tablix?
Using a single multi select parameter I want to show/hide 5 tablix's I have in my SSRS 2008 report. Inside the parameter I want to give each tablix a value a have user control which tablix he wants to see. If user selects all 5 he should be able to see all 5 or if he selects only 4 then display only the 4 tablix's user selected or select's only 3 then display only 3 so on so forth.
How to configure the parameter and hidden expression of the tablix.
I am facing an issue in TABLIX FILTER . I have a table having a column with dates like
01Feb2015
03Jun2014
I need to add a filter in SSRS tablix to get the dates < 01Mar2015
How can I add it in tablix filter as if i directly use my column name and filter value as 01Mar2015 it is not giving results
Secondly, I have another column with date like : 2015-02-04 00:00:00.000
I need to filter the same in another tablix for dates < 01-Mar-2015
I tried this in expression to convert it into string
=Format(Fields!Last_Date.Value, "YYYY-MM-DD")
And used 2015-03-01 in filter but it did not work
If I dont use format, ssrs gives error that tablix cannot compare datetime and string...
I am creating a report in which i have used ranges .
i have used ranges inside a rectangle but when i preview the tablix ranges are coming Perfect concern is that during export to excel border of the rectangle comes only for one row and gets hidden for second row .and its working perfect when exporting to PDF .
I am design a tablix report where i have proper row grouping but when i am trying to column grouping also unable to fetch proper design...design what exactly i am trying.
View 4 Replies View RelatedI am using SSRS 2012 RC0 in Visual Studio 2010 sp1 to build this tabular report. I had inadvertently removed the initial header row from my tablix before adding numerous nested groupings to move the column headers to the header section so they would show up on each page.
I would like to reverse that decision, but I seem to be unable to now re-add that header row back to my tablix. In older versions of SSRS, I was able to right click on the table and then click on insert row-->Header row but that does not seem to be possible in ssrs 2012.. I tried adding a outer row to my top most grouping, but that option was grayed out.
How I can add my header row back to my table.
I have a tablix that looks like this...
30 Jul
31 Jul
01 Aug
02 Aug
03 Aug
04 Aug
05 Aug
Region1
0.00
0.00
0.00
0.00
100.00
100.00
0.00
[code]....
I would like to sort the last column which is a dynamic date (always the most recent from the last 7 days) from 0 to 100.
I am facing whitespace issue in my SSRS report. I have simple tablix report with 10 columns. I am trying to toggle column 5 to 8 using on column 4. The problem I am facing is the whitespace. Now column 5 to 8 are only visible when we expand column 4. When the report is rendered on the screen, there is a huge gap between column 4 and 9.
View 4 Replies View RelatedI have created a report with following data
Age_Category Count
31-40 10
41-50 20
51-60 30
61 and Over 40
Under 30 50
Now I want to order "Age_Category" column in SSRS like below
Age_Category Count
Under 30 50
31-40 10
41-50 20
51-60 30
61 and Over 40
We run 2014 enterprise. I tried this with both table and matrix controls to no avail.
In the table scenario, I drag the table control over, instruct ssrs that a group name will go into column 1 and a sales figure in column2. Then I highlight the sales figure cell, add a column group on month number and generate my report off some june and july data.
ssrs understands that the months now expand horizontally but the rows alternate one with june filled in (blanks in july) and the next with july filled in for the same group name. I believe I got all my sort by conditions set but am not sure.
I tried all sorts of combos in the tablix and group properties before giving up.
I have created a new report & add a table to it. When I select "Tablix Properties" and check on Columns Headers -> "Repeat Cheader columns on each page" the header columns do not repeat on each page. I also tried "Repeat header rows on each page". "Add page break before" seems to work ok. I am using VS 2008 9.0.30729.1 SP..I also tried deploying but it still does not work on the deployed version.
View 69 Replies View RelatedI have 2 tables in my report, a multi value parameter (tp_title) is passed to the report. I am trying to hide the first tablix with this expression in the visiblity option of the tablix properties.
=IIF(Parameters!tp_Title.value = "Financial Years" or Parameters!tp_Title.value="ALL", False,True )
I get the error: The Hidden expression for the tablix ‘Tablix1’ contains an error: Overload resolution failed because no Public '=' can be called with these arguments:
'Public Shared Operator =(a As String, b As String) As Boolean':
Argument matching parameter 'a' cannot convert from 'Object()' to 'String'.
When I render the report. How the tablix can be made invisible based on the parameter?
I have a tablix report (SSRS 2008) when I render it in excel my client always need to see the row headers as fixed one i.e when he/she scrolls report from row 20 scrolling should begin and always want to see first 20 row and next should be scrolling. Is this possible.
View 3 Replies View RelatedI has developed one report in SSRS in SSRS 2008 R2 and when I preview the report in report viewer in all pages Report Header is repeating, whereas when I export the same report to PDF strange for some pages header is missing.
When I searched in google for SSRS 2008 Microsoft agreed that it is a bug and they provided the hotfix. And this hotfix is not working for SSRS 2008 R2 as it is a higher edition but still I facing the same issue.
So if my Parameter value is...
MCCL, MCMA, MCPL, MCPR, MCRE, MCSE, MCSN, MCVA, MCCL, MCEP, MCMA, MCRE out of 43 possible choices,
What is the expression syntax to hide my tablix column based on my parameter value?
=iif(instr(Join(Parameters!ColumnVisibility.Value,","),"MCCL","MCMA","MCPL"...)>0,false,true)
Just not sure of the syntax...or do I have to qualify each one???
= IIf(Parameter!PF1.Value = "MCCL" OR Parameter!PF1.Value = "MCMA"..., TRUE, FALSE)
I am working on complex invoice document that handles various types of invoicing, credit, and progress bill customer facing documents. I am faced with same problem I see many SSRS devs posting on. And that is extra blank pages, being generated because the report width exceeds the width of the page.
My problem is I cannot shrink the horizontal width of the tablix and therefore the report width either...
While I would have done things differently if developing from scratch, the tablix in question has only one column and objects contained in rectangles are placed in the row/column cell.....The link to the image below shows the row I am currently working on. Essentially all the client wants a columnar report with column lines, closed footers, etc... so rather redoing the whole tablix, which I still might do, I am using rectangles with the column then lining them up. Anyway, that is a whole 'nuther post. My specific questions are:
Invoice in Report Builder
1. In the image I have selected the parent rectangle. The children are other rectangles and the data is with grandchildren textboxes that exist within those rectangles. I clearly have a bit of right side white space in the main parent rectangle, but there is no sizing tool on a hover... just move tool. And if I change the rectangle size in the prop form it just snaps back to the cell width. How do I size the parent rectangle and keep if from expanding.
Here I am guessing that to actually reduce the horizontal width of tablix and then the report, I have to first decrease the parent width of the rectangles that occur in each row?
Hello All
Here is my scenario
1. I have to use a ODBC driver which does not support sub query. So I am forced to use two datasets and link them together.
2. I cannot use Sub-Report because the sum from dataset 2 will be used in calculation in Dataset1
3. Also SubReport cannot interact with Main report
4. We Re-created the report in Crystal XI and we can have two datasets, link them and Subreport value can be accessed in Main report
5. We tested Custom method to get this value for every record in Dataset 1 and it is taking too much time.
6. I could not beleive we cannot link two datasets in RS 2005. I like to use RS 2005 but this limitation is forcing us to use Crystal
6. Before we make a decision I thought to post my question here. Is there anyway to link two datasets?
All your help will be greatly appreciated.
Hi,
I need to compare two datasets on the same server and then display if there is a difference in some fields for the two datasets.How can I do that? Is there an example somewhere that I can use ?
I am using SQL Reporting Services 2000.
Is there some way I can connect two datasets? Main issue is that I have to connect two tables from different databases and then display them in a report. Since these tables reside in different databases therefore I have one dataset for each table. While displaying the report I need to join both these datasets and display a report with data from both the tables.
Struggling to come up with an overall sum for each individual user when using the below code
SELECT
Practice.ibvStaffCategorisation.StaffId
,Practice.ibvStaffTotalsCL2Y.Period
,SUM(Practice.ibvStaffTotalsCL2Y.ChargeableMinutes) AS Sum_ChargeableMinutes
,SUM(Practice.ibvStaffTotalsCL2Y.NonChargeableMinutes) AS Sum_NonChargeableMinutes
[Code] ....
As I am using union all it shows two values for each user, the problem is I am getting the data via lookup like below
=Lookup(Fields!StaffId.Value, Fields!StaffId.Value, Fields!Sum_ChargeableAmount.Value, "ABSTimeRollingY")
I don't think I can use a Sum within a lookup so at the moment it is only bringing through the first value for each user but I would like it to bring through both.
Is there a way to do this within the dataset or via the query in the table?
Hi,
I would like to build an SSRS report from two different cubes (SSAS 2005). These cubes are contained in two different SSAS databases.
To do this, i created a dataset for each cube throught MDX expressions.
These datasets use common parameters defined in my report.
Thus, i try to integrate in my report chart datas from the two datasets, but my chart only target one dataset.
Is it possible to create a kind of dataset view to join my two datasets ?
Or is it possible to join the cubes from two different SSAS databases in an MDX expression to put all my datas in a single dataset ?
thx for your help.
Zohir
I am not sure if this is possible or not, we have two datasets and each one has an additional calculated field which breaks the value JobBilledExVAT into three years.
So it reports for example how much we billed in May 2015, 2014 and 2013.
I have got the table to display this when reporting on one dataset by grouping by year
The datasets both look similar to this
SELECT
Practice.ibvSalesByJob.JobBilledExVAT
,Practice.ibvSalesByJob.[Year]
FROM
Practice.ibvSalesByJob
INNER JOIN Practice.idvJobType
[Code] ...
The calculated field is
=Switch(Fields!Year.Value = Parameters!Year.Value ,"15", Fields!Year.Value = Parameters!Pre1Year.Value ,"14", Fields!Year.Value = Parameters!Pre2Year.Value ,"13")
The field I am looking to add together is below
=Sum(Fields!JobBilledExVAT.Value)
If I do the below on the dataset associated with the matrix it displays the sum for each year correctly, I would however like to add the Sum(Fields!JobBilledExVAT.Value) from a different dataset (ABS1M) for the relevant year.
I tried this
=Sum(Fields!JobBilledExVAT.Value) + Sum(Fields!JobBilledExVAT.Value, "ABS1M")
However this adds 2015, 14 and 13 from ABS1M and doesn't add them individually if that makes sense? With the calculated field it only shows Year under the main dataset heading not 15, 14 and 13 separately.
I was think of using LOOKUP however I don't know how this would work as 15, 14 and 13 are not displayed under the dataset.
In ssrs, I want to create an expression for the row visibility. But, the expression will contain 2 conditions from different 2 datasets (DealStarts & RowofTrendingVisibility). I have applied a solution from online, but got an error message is
"The Visibility.Hidden expression for the tablix ‘Tablix9’ contains an error: [BC30451] Name 'launchdate' is not declared. "
I think that there is a minor issue in my syntax.
=iif ((Last(MonthName("DealStarts"))=monthname(month(today())) or launchdate ("RowofTrendingVisibility")<Parameters!StartDate.Value),true, false)