In ssrs, I want to display a column "Actual Value", which is a currency field.
If the field is null, I want to display a "0.00" value, otherwise I want to display the actual value with 2 decimals as well
Not sure how to do this. Below is what I have so far....
=IIf(IsNothing(Fields!Actual_Value.Value),0,Fields!Actual_Value.Value)
In my report i have CNAME parameter , which allows null value. I checked Allow null value check box in report parameter properties.
when i preview the report , it displays checked NULL check box beside CNAME parameter . I want to give some meaningful name(i.e.ALLCustomers) to this checkbox instead of NULL.
Is it possible through SSRS designer?
I have some data from SQL server which contains NULL values for certain fields. I have to create a chart with sum of a field. There is no category and series groups, we are just showing the total sum of a field in chart. Since I have NULL in my source data, nothing is displayed in the chart. I cannot exclude this record from dataset as I have to use this record for other charts. I have to do some filtering in the chart area itself. I have given IsNothing() in the filter of chart properties. It does not work for me. Even I tried to give IsNothing() in the exp of Sum() .
View 6 Replies View RelatedI have a report with a field as follows:
=Fields!Intervention_Type.Value
This field has 25 different Interventions type. i.e
Referral to Physician = 2
Referral to homecare=20
How do I format that so that the results include not only Intervention type with a value but Interventions with a value of 0 as well...
I have a report with datetime parameter which is required to be optional (there should be an option not to select this parameter which would cause in not narrowing result of this report by this parameter).
I used datetime parameter
@daTo (to have the calendar control for selecting date) and check on "Allow Null" value. Here is default Value.
I've also tried to set DefaultValue expression was "=Nothing".
IN my query of data set, here is the part I use the parameter @daTo
... Where (@daTo IS NULL OR TRUNC(@daTo) >= TRUNC(pe.start_time) ....
But when I run the report, I got below error:
ORA-00932: inconsistent datatypes: expected DATE got NUMBER
I think it @daTo value actually not null so it try to TRunc the value
I don't know how to set null value default in my report.
Hello,
I have a report. I need to make a drop-down parameter optional. I've setup the parameter to use a dataset as its source, and I need to allow the value to be null. I've selected allow nulls check box, and I've even tried setting the default value to System.DBNull.Value. But, when the entry is not selected (blank), no data ever comes back. If the data is blank or null, my procedure works (I've tested it). How do I send a null value to the database through reporting services report? I was hoping to avoid creating a special query just for that purpose.
Thanks.
Hi all
How to pass Null parameter in Reporting Services.
Regards
I'm trying to have a default or null value in the dropdown list of the parameters on SSRS report. The dataset is bound with the Dynamics-AX 2009 AOT query. In the screen shot below you can see that I need a show All option in the dropdown list.
View 7 Replies View RelatedView 2 Replies View Related
Hello,
I have a stored procedure that on two fields it allows null. On the report, I have two DropDownList boxes that are populated with data, however, I would like the user to be able to have the option of not selecting an item from these list, thus passing null to the stored procedure.
When I goto "Report | Report Parameters" I have set these fields to "allow null" and "allow blank" and at the bottom I also gave it the default value of null.
When I run the report in preview mode, those two dropdownlist have a <Select a Value> and my assumption is since I want them to pass null, I will just leave them that way. However, when the report is ran, I receive an error saying "Please select a value for the parameter: (my parameter)". So it forces me to select an option at which I don't want to do.
How can I set this to pass a null?
Thanks,
Flea#
I am trying to get a null value to pass to a multi-select parameter in SSRS 2005. The multi-select box is getting its possible values from the following query:
SELECT NULL CMP_ID, '<all companies>' COMPANY UNION SELECT DISTINCT T1.CMP_ID, T1.COMPANY FROM VIEWCOMPANYLIST T1 WHERE T1.DIV_ID = 2 ORDER BY 1
This query is pre-pending a row with NULL as the first ID. The resulting data set is exactly what you would expect - Row 1 has a null in column CMP_ID, and <all companies> in column COMPANY. All the rest of the rows have proper data. My multi-select parameter box is of type Multi-value Int, with possible values populated by this query and a default of NULL. However, when I preview the report, the <all companies> row disappears.
It's not even in the list, and it's not getting selected by the default selector. So, of course, when I try to View Report without selecting anything, I get prompted to select a company. Why the prepended row in my dataset is getting dropped from the multi-select box at display time? And yes, I have to be able to pass a null value because the stored procedure on which the report is based expects this parameter to be optional.
I have a scenario where I would like to use the 'OR' statement in SSRS expression.
I have the following fields:
GLnumber, ProgramControl, GLAmount & EscrowDepositAndWithdrawal.
What I would like to do is as follow:
If GLnumber is 12200.22162 then I would like to take EscrowDepositAndWithdrawal
OR
If ProgramControl is 'escrow' then I would like to take EscrowDepositAndWithdrawal
OTHERWISE I would like my expression to take GLAmount My expression looks something like this:
=IIf(Fields!GLNumber.Value = "12200.221620" OR Fields!ProgramControl.Value = "ESCROW",Fields!EscrowDepositAndWithdrawal.Value,Fields!GLAmount.Value)
It appears only the first IF statement is true. It does not appear that the OR statement never be true.
I am not sure why the OR statement never satisfied. I know I have a record with ProgramControl = "ESCROW".
I have a table with the following fields and data:
Offense, Year, Month, Count, Amount
F 2007 January 11 $49,238.00
F 2007 February 12 $24,000.00
F 2007 March 31 $55,184.00
F 2007 April 19 $64,647.00
F 2007 May 33 $100,010.00
F 2007 June 16 $59,678.00
F 2007 July 22 $39,700.00
F 2007 August 3 $9,000.00
F 2007 September 4 $75,000.00
F 2007 October 8 $19,250.00
F 2007 November 50 $106,153.00
F 2007 December 26 $80,000.00
I have data for years 2007-2014. I am designing an SSRS report, and want to use IIF statement to return data. Using the following:
=IIF(Fields!Year.Value="2007" AND Fields!Month.Value="February", "return value of count field", "n/a")
The above does not work, it doesn't return the value of Count field, it does return the n/a.
I am trying to do an IF statement based on the parameter (Average or Total). However I am struggling with how to put the two together.
=Floor(Sum(Fields!Avg_ACD_Time.Value)/ 3600) &":"& Format(DateAdd("s",Sum(Fields!Avg_ACD_Time.Value), "00:00"), "mm:ss")
=IIF(Parameters!ReportType.Value="Average", Sum(Fields!ACD_Calls.Value)/CountRows(), Sum(Fields!ACD_Calls.Value))
I am using the following function to set the time format, however I now need to to add an IF statement into this equation.This is the current expression I am using:
=Floor(Fields!ACD_Calls.Value / 3600) &":"& Format(DateAdd("s", Fields!ACD_Calls.Value, "00:00"), "mm:ss")
Now I need to use the following expression with this:
=IIF(Parameters!ReportType.Value="Average", Sum(Fields!ACD_Calls.Value)/CountRows(), Sum(Fields!ACD_Calls.Value))
How do I join the two together?
I need to run a different select statement based on the value of a parameter. Visual studio is not liking how I am formatting it.
SELECT mc.CtrlID, mc.PrtfID, mc.PrtfTyp, mc.City, mc.STATE, mc.U_O_AND_M, mc.CHBBal, mc.IRG_Number, mc.PrtfName, mc.LnID, mc.UPB, mc.UPB_Master_Loan, aa.Prtf_FNMA_FHLMC_Other , aa.ReportingSummar
FROM vw_XXX_GIAC mc
INNER JOIN vw_XXX_InvestorMatrix aa on mc.CtrlID = aa.CtrlID
WHERE
case when
@PortfolioID=1 THEN aa.Prtf_FNMA_FHLMC_Other ='FNMA'
@PortfolioID=2 THEN aa.Prtf_FNMA_FHLMC_Other ='FHLMC'
@PortfolioID=3 THEN aa.Reporting Summar ='FLOW'
END
I want to write a conditional where clause in SSRS query, such as
WHERE CASE WHEN @para = 1 Then Column1 Like '%%'
WHEN @para = 2 Then Column1 IN (@NameList) END;
What's the correct syntax to write the conditional where clause?
I have the below script to create directories based on my select statement.
create table students
(
f_name varchar(100),
l_name varchar(100)
);
insert into students values ('John','Smith'),
[Code] ...
The result I am getting is truncating the directory names as in the below:
I need to set a field value based on two date time parameter's.What is the correct syntax to allow me to pass the value into the field in my SSRS expression ?
=IIf(Parameters!EndDate > Parameters!StartDate.Value, "Overdue")
my dataset from sharepoint list. and this dataset value assign to parameter. i want when no any parameter is selected than it should filter like "ALL". when i select alow null value it give me prompt error you can not select null in multivalue parameter.How can i do it. i am using share point list.
View 3 Replies View RelatedI have a flat file with the following columns
SampleID Rep_Number Product Protein Fat Solids
In the flat file SampleID and Product are populated in the first row only, rest of the rows only have values for Rep_Number, Protein, Fat, Solids.
SampleID and Product are blank for the rest of the rows. So my task is to fill those blank rows with the first row that has the sampleID and Product and load into the table.
Hello,
I am trying to migrate my reports from SQL server 2000 reporting services 32bit to 2005 64bit. I am following the migration steps that MS specified.
Restored my Reportserver and ReportserverTempDB databases
Then I was using the configure Report services to upgrade these databases but I always end up getting the follwoing exception when I run the upgrade on the "Database Setup" configuration for 'ReportServerTempDB' database
System.Data.SqlClient.SqlException: Could not locate entry in sysdatabases for database 'ReportServerTempDBTempDB'. No entry found with that name. Make sure that the name is entered correctly.
at System.Data.SqlClient.SqlConnection.OnError(SqlException exception, Boolean breakConnection)
at System.Data.SqlClient.SqlInternalConnection.OnError(SqlException exception, Boolean breakConnection)
at System.Data.SqlClient.TdsParser.ThrowExceptionAndWarning(TdsParserStateObject stateObj)
at System.Data.SqlClient.TdsParser.Run(RunBehavior runBehavior, SqlCommand cmdHandler, SqlDataReader dataStream, BulkCopySimpleResultSet bulkCopyHandler, TdsParserStateObject stateObj)
at System.Data.SqlClient.SqlCommand.RunExecuteNonQueryTds(String methodName, Boolean async)
at System.Data.SqlClient.SqlCommand.InternalExecuteNonQuery(DbAsyncResult result, String methodName, Boolean sendToPipe)
at System.Data.SqlClient.SqlCommand.ExecuteNonQuery()
at Microsoft.ReportingServices.Common.DBUtils.ApplyScript(String connectionString, String script)
at ReportServicesConfigUI.SqlClientTools.SqlTools.ApplyScript(String connectionString, String script)
It's driving me crazy, why is it looking for 'ReportServerTempDBTempDB' in the catalog instead of 'ReportServerTempDB'?
Is it possible to migrate from 32bit to 64bit?
Any help is appreciated
I'm attempting to obtain a cost effective solution for my existing customers to develop reports on their SQL 2000 Server installations using their Reporting Services 2000. With products like Visual Basic.NET 2003 becoming almost impossible to obtain, I have at least one customer who is running into a dead end.
One option possibly is the SQL Express with Advanced Services download, which has Reporting Services. My questions are as follows:
Can the report designer component of SQL Express Reporting Services be configured to connect to an external database (which would happen to be a SQL 2000 database) to establish its datasets?
Does the resultant designed report end up in an RDL file? If the customer published this report via the Reporting Services 2000 Report Manager, would the report be able to run?
Sorry for asking a question like this that I could probably answer on my own, but my customer needed this answer yesterday. I have scoured the web and microsoft sites - and posted a question on the official SQL Reporting Services cateogy ... in an attempt to answer the basic question of how to design reports for Reporting Services 2000 in the absence of Visual Basic.NET 2003 (or other .NET 2003 tools) with no success.
Thanks to anyone who can help.
-- Mark
I work in a big project and we will begin in using reporting services as the base technique for reports and I will be responsible for this part. but I have a problem I will discuss in the following:
Currently: We use currently devexpress reports and we have 2 languages(Arabic and English). the data in tables saved in two ways (Arabic and English). when the end user change the language of the web site the report data language changed when run it.
Example:
we have table with (ID, NAME_AR, NAME_EN, JobTitle_AR, JobTitle_EN). designed report will display(ID, NAME_EN, JobTitle_EN) . but the end user change the language of the system the report will
dispaly(ID, NAME_AR, JobTitle_AR)
Hint:this done pragmatically
how to do this in reporting services.
Using this IIF statement:
=CountDistinct(IIF(Fields!Released_DT.Value = Fields!Date2.Value, Fields!Name.Value,
Nothing))
Released_DT = a date - 09/03/2015 or 09/02/2015
Date2 = returns another date value in this case 09/03/2015
What I'm trying to do is: count distinct number of people (Fields!Name.Value) if the Relased_DT = Date2.My IIF statement is returning a zero value.
i have a list report
some values of this are blank or null
i want to avoid that spacing if it is null
like
name:jjj
lastname kkk
firstname
address uuuu
i want it should be
name jjj
lastname kkk
address uuuu
How can I do a null to 0 in a select statement? I tried the NZ() function but it is not part of SQL.
Thanks very much,
Hi Everyone,
I have a query
select name, address, city from table1
I want to append address +'-' + city in this query . I want to show hyphen only if both address and city are not null. If name is null then I don't want to show hyphen. How can I get around this problem.
Any help will be appreciated.
Thanks,
Vinki
I searched through the forums thinking this may have been brought up before, but I cannot find a post the directs to my problem.
I have a lookup table (lookup.os) which defines various operating systems. It has a "OSID" field which is just a primary key numbering, a "OSInstr" field which is used in a 'like statement' in a cursor used later on and "OSName" which is the full name of the OS.
ID| BROWSERNAME | INSTR
*********************************
1 | Windows XP | Windows+NT+5.1
2 | Windows 2003 | Windows+NT+5.2
3 | Windows Vists | Windows+NT+6.0
.....
19 | Unknown Operating System | <blank>
I have a cursor loop that goes through another table (tblIISLog_ALL_OS) and searches through the instr of the (lookup.os) table to add to a stats of a third table (statistics.os). It works fine going through the loop, except there is a problem with the last value in the (lookup.os) table. If the value does not match the rest, it will select value "19 - Unknown Operating System" which is correct, but if the value is null it will not be selected. I take it 'NULL' >< a blank like statement. Here is what I have now. I am open to suggestions of what I should do. I was thinking maybe removing the "19 - Unknown Operating System" from the (lookup.os) table and after the first cursor loop has run, run it again and everything remaining it will just put in as "19 - Unknown Operating System". What do you think?
DECLARE @TempID int,
@TempOSInStr varchar(50),
@TempOSName varchar(100),
@TempCount int
DECLARE loopc CURSOR FOR
SELECT [OSID],
[OSInStr],
[OSName]
FROM [IISLOG_REPORTS].[dbo].[lookup.os]
OPEN loopc
FETCH NEXT FROM loopc INTO @TempID,
@TempOSInStr,
@TempOSName
SET @TempID = 0
SET @TempCount = 0
WHILE @@fetch_status = 0
BEGIN
---------------------
SELECT [date], @TempOSName, count(1)
FROM [IISLOG_REPORTS].[dbo].[tblIISLog_ALL_OS]
WHERE '%' + [csUserAgent] + '%' like '%' + @TempOSInStr + '%'
GROUP BY [date]
INSERT INTO [IISLOG_REPORTS].[statistics].[os]
([TotalDate]
,[OSID]
,[OSTotal])
SELECT [date], @TempID, count(1)
FROM [IISLOG_REPORTS].[dbo].[tblIISLog_ALL_OS]
WHERE '%' + [csUserAgent] + '%' like '%' + @TempOSInStr + '%'
GROUP BY [date]
DELETE FROM [IISLOG_REPORTS].[dbo].[tblIISLog_ALL_OS]
WHERE '%' + [csUserAgent] + '%' like '%' + @TempOSInStr + '%'
----------------------
FETCH NEXT FROM loopc INTO @TempID,
@TempOSInStr,
@TempOSName
---------------------
END
CLOSE loopc
DEALLOCATE loopc
Thanks for the assistance. I hope I provided all the necessary information and explained it ok.
Hello,I have a table which contains some nullable columns. I want to write asingle query, which can be prepared (ie. prepared statement), that canhandle null or non-null values for the where clause. Is this possiblein a standard-conforming manner?The simple for of the query is this:SELECT * FROM <table> WHERE <column> = <value>But when the value to be matched on is NULL, the syntax of the querymust change to be:SELECT * FROM <table> WHERE <column> IS <value>In the second case <value> is NULL.I know one option might be to change the ANSI NULL handling option,but I am loathe to do this (I have five RDBMS's to support, not justMSSSQL).I thought I might have been able to cheat using an IN clause to makethe SQL consistent, but no luck.ThanksKevin
View 6 Replies View RelatedHi There,
Our DBA has installed reporting services on a server and now in order to access the report manager, one has to be an Admin on that Server. I am guessing that there is a mistake in the configuration of Reporting Services. Usually it should allow anybody who was added to the roles in the properties section of the Report Manager, right? I have also added the users to the DB..
Also I am using Windows Authentication to access Report Catalog items (Reporting Services is installed on Server2) from a web Application(deployed on Server1) and displaying the report using report viewer. For some reason, server1 has to be in an Admin role on Server2 to access the report catalog/report. This is kinda strange for me as I don't want everybody to be an Admin on Server2. Can anybody please point in the right direction?
Thanks.
We have installed SQL Server 2005 with reporting services.When tried to open getting errors as below: how to avoid such errors See the end of this message for details on invoking just-in-time (JIT) debugging instead of this dialog box.
ReportServicesConfigUI.WMIProvider.WMIProviderException: A WMI error has occurred and no additional error information is available. ---> System.Runtime.InteropServices.COMException (0x8000000A)
at System.Runtime.InteropServices.Marshal.ThrowExceptionForHRInternal(Int32 errorCode, IntPtr errorInfo)
[code]...
Hi all,
I have some problem about reporting service add-in.
After I install reporting service add-in for SharePoint, reporting service menu does not appear in Application Management Tab in SharePoint Central Administration.
I try to uninstall and re-install again, it remain not work.
How can I solve this problem?
Thank you very much.