Reporting Services :: Keep Multiple Data Tables Having Fixed Size Data In Same Page On Runtime?
Jul 31, 2015
I have a report where in I have a combination of matrix ,table data regions.
The problem what I am facing is that the data tables don't remain fixed in their position and they tend to move down.
E.g. table 1 and table 2Â are on the same page in design time side by side (right and left)however during the runtime the table1 is pushed down and table2 is at its position .
Now how can I keep them all fixed in their same position. Most of the tables have fixed size rows and some who have high size of rows have been put at the end . What settings we can set?
I have a report with multiple tables. I need to show each tables in different pages. When there is no data for tables/tables , it is coming with the next table which has data. I have given "Add a page break after" option in the tablix but still the tables are coming together when no data available. How can I show it in different page?
I have several row groups in a tablix. I want to keep header visible through scrolling.and i also want the first row group to visible, only the first.
So I set the first row group's properties fixedData to TRUE and keep other row groups to FALSE then when running the report i got error "FixedData is not allowed in row TablixMember,unless it is also set on the first row TablixMember"
Now I think this is not possible. or is there anyway to make it works?
I am using SQL Server report 2008/2012 (SSRS) and my report viewer contains body content with 3 Row groups. While printing the report, Â data print with blank space and move to continue data to next page.Â
Departure flight : 70 rows First Page           : 42 rows printed Second Page     : 23  rows printed  [ Supposed to be print 28 ,  if the total count of records more than 23 and less than 42 then the page print only 23 records ] Third Page          : 5 rows printed
Departure flight : 42  rows First Page           : 42  rows printed [Report max. record allowed to print 42 rows so if total record is 42 then print perfectly ]
Departure flight : 26 rows First Page           : 23 rows printed [Supposed to be print 26, if the total count of records more than 23 and less than 42 then the page print only 23 records ] Second Page     : 3 rows printed
i want to break 2 by 2 rows in reportceiling(rownumber(nothing)/2).i used this expression in row group. URL....but i want to use this expression in matrix and that matirx is with in list . so i  am getting error . how to use rownumber in list.here i used list to break the page wise id
can someone tell me how I counld get a pagefooter linked textbox to show a data bound page footer in a report having 8 tables....??? I have tried the common solution showed on the previous forums.. They worked when there was only one table... where in i could place a group in 1 of the cells in the table body of the report. but now since der are 8 tables in the report.. d job is become very tricky.
the page footer is not showing up on all the pages of the report. it only shows on the first page of the report.
I have a group of reports that are the same for 3 different companies, the difference is the data connection. Is there a way I can change the data connection based on a variable passed in at the time of report execution?
I'm using Reporting Services 2008 R2, version 10.50.2550.0, and Visual Studio 2008, version 9.0.30729.4462 QFE. Not sure if the SQL version matters, since I haven't gotten the report out of the development environment.I've read lots of messages, including URL.... that show you can have multiple data entries per row in a Range Bar Chart, simply by turning DrawSideBySide to False.My data set basically contains four pieces of data, LineNumber, Equipment, StartTime and EndTime. I have data like:
(I actually have a date with my datetime entries, but that should give you the idea.) My chart is set up with Values of EndTime and StartTime. If I set my chart up with only Equipment in the Category Groups entry, my chart will show CLM1 from 08:00-08:30, and SS1 from 08:05 to 08:35. No sign of the other entries per equipment, although I added a tablix to retrieve the same data and it all shows up.Changing DrawSideBySide between True, False and Auto has no effect on the data displayed on my chart. If I add StartTime in the Category Groups, I do show all the data, but one row for each piece of data, which isn't what the customer wants.From what I can tell from various sites, I'm set up right, but it just isn't working.
I need to export around 1 million records to excel. As we know that there is a limit of approx 65,000 rows in one worksheet so the exporting functionality is failing. One way is that I should be able to configure the Reporting Service in such a way so that once 65,000 records gets populated in the first worksheet, then the rest 35,000 records gets popultaed in the second worksheet.
I am not able to find out how this can be achieved in Reporting Services. Please help me in this.
Running SQL Server 2005, trying to develop an SSRS report to basically pivot a table of data with multiple columns.
Here's the basic source table:
Day   Cases  Referrals   Vends 1        291         0            0 2        293         1            0 3        293         1            1
And I want to display it as:
Day            1      2       3 Cases        291   293  293 Referrals      0       1     1 Vends          0        0     1
I thought I could use a matrix for this but I can't seem to get it worked out. Is this even possible?
The Day number is meant to represent the day of the month and the user would input a start and ending date parameter.
I am using SSRS 2008 R2 Report Builder 3.0 (10.50.4276.0) . I have simple set of data which has a persons Title and Name e.g. Mr Smith, Miss Jones, Doctor Foster
The report has a parameter where the user can select which records to show based on the matching titles (Mr, Miss, Doctor)
The Query for the report uses Title in (@Title) where @Title is the only parameter which can take multiple values. The report works correctly for any 1 value selected, but as soon as 2 or more values are ticked in the drop down, it fails.
I believe the parameter value is being passed into the query with a comma separating the values e.g. Mr,Miss which causes the IN statement to give an error, as the statement would be where Title IN ('Mr,Miss') which does not match any of the data values.
The parameter value passed needs to be 'Mr','Miss' for the IN statement to work. What statement do I have to put in the report query to get it to select any of the data rows where the title matches any 1 of the selected values?
I have a report designed in RB3 that uses a data source from a SQL database that is on the report server. I want to add data to the report from an access database an a network drive.
I can add the second data source and create a data set to add data to the report. The dataset query returns data from the Access database but when I run the report I get the following error.
An error has occurred during report processing. (rsProcessingAborted)
Cannot create a connection to data source 'Feasibility'. (rsError OpeningConnection)
Also when I test the connection to the Access data base I get error ERROR (IM002) (Microsoft)(ODBC Driver Manger) Data source name not found and no default driver specified.
I noticed that Report Builder is connecting to the report server. If I disconnect from the report server I can a can connect to the Access data base but not the SQL database.
How can I get the report to run against both data sources?
I have an issue with using multiple parameters in SQL Reporting services where data is passed in from a stored procedure
When running the report in design mode - I can type in a parameter sting and it runs fine
In the report preview screen I can select single parameters by ticking the drop down list and again it runs fine
as soon as I tick more than one I get an error
An error occurred during local report processing
Query execution failed for data set €˜data'
Must declare the scalar variable '@parameter'
Some info...
The dataset 'workshop' is using a sproc to return the data string?
I get multiple values back fine in the sproc using this piece of code
(select [str] from iter_charlist_to_table( @Parameter, DEFAULT) ))
I have report parameters set to Multi-Value
Looking through the online books it says...
You can define a multivalued parameter for any report parameter that you create.
However, if you want to pass multiple parameter values back to a query, the following requirements must be satisfied:
The data source must be SQL Server, Oracle, or Analysis Services. The data source cannot be a stored procedure. Reporting Services does not support passing a multivalued parameter array to a stored procedure. The query must use an IN clause to specify the parameter.
Is it possible to have different chart (having their dataset from same shared datasets) like six on one report, then secondly can they all respond to same parameter filter.
I have a report that gets sends out through a subscription and sometimes the report has multiple pages and all those pages appear within one email.Is it possible to set the subscription in such a way that an email is sent per page when the subscription executes.
My Requirement ,In Source Database 5 tables are there ( Emp,Loc,dept,Time,Product ), Destination is Single Excel file.But Dynamically how to load each table information to load into each sheet wise through SSIS Package?
In SSRS reports i have multiple charts and tables. per page i have to display one chart and one table. How to put page break after the chart and table. I have not used rectangle. I created all the charts and tables in the body area.
I have a delimited text file with 650+ columns. The sum of the column lengths of a single row, if fully populated, exceeds 30K bytes. The "killer" fields lengthwise are the "Description" fields. If they were removed from the input file, the remainig columns would occupy about 5000 bytes, which is within SQL max row length.Â
Can SSIS be used to created these two tables? (one without  description fields, the other with those field but arranged vertically in the table rows).
The fundamental issue is I can not import a single file row into a sql table because that row length could exceed the max byte count for a row.
I have created one reports but all the records are displaying on one page.find a solution to display the records page by page. I created the same report without group so the records are displaying in page by page.
Hello I have a project that uses a large number of MS Data access pages created in Access 2003 and runs on MS SQL2005.
When I am on lets say my client, (first page in a series) data access page and I have completed the fields in the (DAP), I am directing my users to the next step of the registration process by means of a hyperlink to another Data access page in the same web but in a linked or sometimes different table.
I need to pass data entered /created on the first page to the next page and populate the next page with some data from the first page / table. (like staying on the client name and ID when i go to the next page)
I also need the first data access page to open and display a blank or new record. Not an existing record. I will also be looking to creata a drop down box as a record selector.
Any pointers in the right direction would be appreciated. I am some what new to data access pages so a walk through would be nice but anything you got is welcome. Thanks Peter€¦
I have a report with 2 tablixes, both the tablixes can be hidden based on the parameter selection. The 1st tablix has a drill through action on one of the columns, that calls the 2nd tablix in the SAME report. Once you click on the drill through, the 1st tablix is no longer visible, only the 2nd one is.
The report is working fine, until you export it to CSV file. Once you are on the 2nd tablix (1st one is NOT visible at this time in the report), and then when you export it to CSV, BOTH, the 1st tablix as well as 2nd tablix are visible in the CSV file. Why does the 1st tablix come up in CSV IF you just exported 2nd tablix to CSV?
Is there a workaround to NOT show the parent/1st tablix at all if the 2nd tablix is exported? Excel works fine!I know sub-reports instead of multiple tablixes might solve this issue.
I am trying to find a reference for a client that lists the fields available to be substituted into a data driven subscription from the query, along with the expected data types.  For example, the field on whether or not to include a link to the report seems to be expecting a bit data type.I have searched and can't seem to find anything.  I guess I could walk through the interface and try different data types, but if  a list exists, that would be better.Â
I have 4 Tablix and 2 of the Tablix get data from Server 1 and other 2 get the data from Server 2.I have set NoRowsMessage "=Data Not Available for the Selected Values"  for all the 4 Tablix.Now if data is not available from Server 1 then I must show "Data Not Available for the Selected Values" only once in the  outputbut now its appearing twice in the output because of the 2 tablix that had no rows.Similarly if data not available from Server 2 then it should show "Data Not Available for the Selected Values" only once in my output.If Data not avilable from all the Tablix then also i t should show only once as "Data Not Available for the Selected Values" in the report output.
I have 2 tables in a report and have set the FixedHeader property of the 3 left columns on both tables to True. The report displays perfectly when previewing, but when deployed and viewed in IE6 fixes only the columns from the first table (all columns from 2nd table display, but the 3 columns with FixedHeader set to true scroll out of view when report is scrolled right) and additionally displays an error.
Error: Line: 13 Char: 1080 Error: 'children.0.children.0.children.1.children' is null or not an object Code: 0 URL : <URL of report displayed here>
Possible additional points of interest. 1)There are some groupings in the second table which are initially hidden and toggled by cells in the 1st or 2nd column of the table.These 2 columns are the first 2 of the 3 columns having FixedHeader set to True. 2)If the 1st table is moved physically to below the 2nd table, FixedHeader fails on both tables.
Is there something that I've set up incorrectly? Any help is appreciated.
We have a report that was created in SSRS 2008 R2 that has 3 tables with different datasets that share a common ID that I want to use to group them.
If we run the report passing only a single value for the grouped parameter then the report works perfectly. What we need is for this report to allow multiple values to be selected for this parameter and for the report to run as if the user had selected each value one at a time and run the report with page breaks in between. Currently, when we pass multiple selected values for the grouping parameter the report displays all values for table 1, then all values for table 2, then all values for table three as below:
Table 1:
Detail rows for Group Param Value 1 ... Detail rows for Group Param Value 2 ... Detail rows for Group Param Value 3 ... ....
Table 3:
Detail rows for Group Param Value 1 ... Detail rows for Group Param Value 2 ... Detail rows for Group Param Value 3 ...
But we want it to render like this:
Table 1: Detail rows for Group Param Value 1... Table 2: Detail rows for Group Param Value 1... Table 3: Detail rows for Group Param Value 1...
[code]....
The page breaks are needed so that when the report is exported to excel each individual report (by group param) will be on its own uniquely named tab.The report must export cleanly to excel and currently does for the single value passed.
Everytime I run the load packages that I have built into the MDS staging the tables, in MDS_Staging, get cleared down and then repopulated. When the MDS database gets new data it appends it and does not clear down the data that is already in the database and is there fore hold duplicate rows.
Is there a way of truncating the tables in the MDS database before populating again with the new data from the MDS_Staging database so as to not hold duplicate rows?
I created a report in Reporting Services which was working. Then I filled in the "No Rows" section in the properties of a tablix in the report. Now it shows the No Rows message even if there is data. If I open the Shared Dataset that is used in the report and open Query Designer and run the query I get data.
