Reporting Services :: Line And Bar Chart With One Scale
Nov 12, 2015
Is there a possibility in SSRS to have One stacked bar of cumulative sum of different ID's and and Line Chart at left hand of the Bar which will show the Progress as soon as the ID turn to Competed status.
I have been trying to do this , however there is huge problem of scaling:
The line should be finished at all the completed ID's SUM which is the lowest stack of the Bar.
However , the bar gets stretched to all of the space.
I have tried to place it into Tab lix, But it doesn't work.
View 3 Replies
ADVERTISEMENT
Sep 11, 2015
I have an stacked chart with line with markers. The scale on the right side is the finished good which has a min qty of 383 while the highest is 52439. how can i set this scale that start from 0 to 300 and soon. right now under scale properties I set the max to 60000, the min is set to auto while in the interval properties i set this to 10000. How this line marker adjust the scale quantity (fisnished good).
View 2 Replies
View Related
May 4, 2012
I need the Trend line for the following data in Line chart they are the following data. The following are the graph are my output and i need the trend line for these Key_gap value.
This is the link [URL] ....
I need the same trend line for the Bar-Chart in SSRS 2005.
View 5 Replies
View Related
Oct 21, 2015
I need to create a chart with the following features
1) Bar chart that has data for 3 years (3 series)
2) Line chart that has the same data as per the above points on the bar chart but this is a running total. (3 series)
3) These data points are for the 12 months
4) there should be a secondary axis for the cumulative one
Can I create this using the same data set?
View 6 Replies
View Related
Nov 24, 2015
I'm using a bullet chart in a SSRS report and I want to set the Maximum value in the Linear Scale properties to highest value of the following 4 fields. Is there any way to do this?? This will make all charts line up properly.
NC_LAST_YEAR
NC_LINKED
NC_CURRENT
NC_PLAN
View 5 Replies
View Related
Jun 9, 2015
Representing an elevation value in a line chart? or (Any chart)
The below are the sample values
GRID_ID StarPoint EndPoint Elevation
3 0 900 1220.1
3 900 1000 1219.5
3 1000 1100 1219.2
3 1100 1300 1220.1
4 0 100 1330.1
4 100 200 1328.1
4 200 300 1329.1
View 4 Replies
View Related
Feb 28, 2008
Hello,
I need to know what means are available to change the Minimum and Maximum Y-Axis scale values rather than leave them simply as they are in the properties.
Right now whatever min/max values I enter into the scale for the Y-Axis are unchangeable.
I need to be able to change the min/max scale values based on the value of the data at run time.
Any help is appreciated.
Thanks.
View 6 Replies
View Related
Oct 20, 2015
I have the below chart.
In this, I need to add line charts for the three years specifying the running total. I already have bar charts for the respective years. This is the query that I used to get the dataset.
SELECT [Parent Name], [ID], [Year], [Month], SUM([Value]) AS 'Running Total'
FROM Regulus_Data_Backup
GROUP BY [Parent Name], [ID], [Year], [Month]
order by [Parent Name],[ID], [Year], DATEPART(mm,CAST([Month]+ Convert(varchar(4),[Year]) AS DATETIME))
Then I added a series with a expression that had the chart type as line as shown below.
My Expression was
=RunningValue(Fields!Running_Total.Value,SUM,"MonthWiseData")
My 3 parameter was "MonthWiseData" which is my dataset name. Is this correct? I use the same dataset to get the bar charts too. I get a error message now when loading the report saying "the scope parameter must be set to a string constant.
My goal is to get bar values for 3 years for the 12 months and in the same chart get the cumulative numbers for the 3 years for the 12 months. How can I do this?
View 14 Replies
View Related
May 29, 2015
I have this issues with empty points in a Line Chart. How to make it work with dynamic values in the series and some dates in the category, how to join the "data" values for a "series"where there are no category value. So far I cannot see any fix that would make it work by joining the data points with the "average" data on a empty point (no category value) and with the same color on the line.
View 2 Replies
View Related
Sep 21, 2015
I have a stacked bar chart which i notice a vertical line char. how can i removed this vertical line? I already modified the properties under smart labels under calloutlineanchor, calloutlinestyle, calloutstyle to None but still getting this vertical lines. another things is the data label as you can see in the the first column the 1.8% should be place under the gray color but its already shown before the orange color.
View 3 Replies
View Related
Jul 27, 2015
What is the best optimised options to display the date labels with bi-weekly intervals starting date Date from one month to three months future from the current date?
As per above requirements, I have built the below line graph query and graph, currently it only displays the date labels as per data but I need to display date labels with bi-weekly intervals starting date from one month to three months future from the current date. Also another issue found, if there are few more date labels then does not show all labels on horizontal axis.
Select
/* Set Week End date as Sunday */
DATEADD(DAY, 7 - DATEPART(WEEKDAY, t.TaskBaseline0FinishDate), CAST(t.TaskBaseline0FinishDate
+1 AS DATE)) as[WeekEnd]
,count(t.TaskBaseline0FinishDate) as Baseline
,count(t.TaskFinishDate) as Finish
[Code] .....
View 3 Replies
View Related
Nov 23, 2015
I have an existing stacked chart with line graph as secondary. the value of line graph is finished good qty. now i need to removed the finished good and change it with a target line chart. May i know on how to work change this to line. The target value is 68%.
Rec MonthQty ReceivedFinished GoodScrapWIPFG %ScrapWIP %
Jan-20151181336215754353162352.6%46.0%1.4.%
Feb-2015843174884434083139057.9%40.4%1.6.%
Mar-20151115357179537993174764.4%34.1%1.6.%
Apr-20151315319378536096165071.3%27.4%1.3.%
May-20151205567891836410522865.5%30.2%4.3.%
[code]...
View 5 Replies
View Related
Mar 26, 2007
Hello All,
I have a reporting services report in the form of a chart. I have two datafields on the chart.
I need to be able to dynamically hide one datafield and view the chart for the other one and vice versa.
How do I do this ?
Any help would be appreciated..
Thanks!
View 4 Replies
View Related
Jul 17, 2014
When I export the report in excel format the chart is displayed as picture. I want it to be displayed as editable chart.Does Office Writer work in this situation and did anyone use Office Writer to accomplish same type of problem.Is there any other method or product we can use instead of the office writer.
View 2 Replies
View Related
Feb 13, 2012
I have a report designed in SSRS 2008 R2.My issue is that the data labels do not stay outside the bars for high values.
View 4 Replies
View Related
Apr 22, 2015
I have two SQL 2014 Enterprise Edition installed with the SSRS (native) role installed.
Both server are configured separately with their own Report Server database. Now I want to configured a scale out deployment with a shared database.
On Server 1, I created a new Report Server database. On the second server, I change the database and joined the existing database. The problem is that the second server never shows up under Scale-Out deployment (Waiting to Join).
View 6 Replies
View Related
Mar 15, 2007
Hi,
I have been trying to get report services installed but another error came:
The feature: "Scale-out deployment" is not supported in this edition of Reporting Services. (rsOperationNotSupported) (rsRPCError)
This error comes when I try to view either http://localhost/Reports or http://localhost/reportserver
Any suggestions?
thank you.
View 2 Replies
View Related
Sep 7, 2007
Can you have different scales on a bar chart. I want to chart sales and quantity. Oracle lets you label the top of the bar chart as money and the bottom as quantity.
I am dividing my sales by one million and quantity by one thousand to make them similar in size on the same chart. I am using the sum of the sales/1000000 as a point label. Is there any way to limit the number of decimal places displayed. Currently it is displaying something like 1.94889312043; 1.95M would be better.
Thank you.
View 2 Replies
View Related
Mar 30, 2007
Hi
I need to scale barchar or any other chart in sql server 2000
i need to know the possiblity of this in SQl 2000
Regards
View 2 Replies
View Related
Jan 21, 2007
Hi there,
I have a case. I have 3 numeric fields and 1 category field to be displayed on bar chart reports. the problem is 2 of the 3 numeric fields have significant different scale value. so I need to add additonal scale at the right side of bar chart to represent 1 numeric fields + the 2 other numeric fields at the left side scale (Y). Please advice. Thanks.
R'gards
Toni
View 1 Replies
View Related
Aug 8, 2006
I have a stored procedure which will bring me back the Min, Max and Mean of different result sets. What I want to do with the Y-Axis is set the Min scale value of the chart to be Min -%5 and the Max scale value to be Max + 5%.
Is there a way to change the Y-Axis values at report run time without spitting my own RDL?
View 4 Replies
View Related
Feb 7, 2007
We have a line graph which plots the actual data points (x,y), everything is working fine with this graph. Now we need to add a trend line to this existing graph after going thro. the articles we came to know that there is no direct option in SSRS to draw a trend line. So we need to calculate the trend values ourselves which we need to plot as atrend line. This trend line is similar to the trend line which comes in Excel chart, do anyone know how to calculate the trend values from the actual data points. We got through several formulas, but were not clear, have anyone tried out exactly the same, if so please help us out by providing an example to calculate the trend values.
View 1 Replies
View Related
Feb 5, 2007
hey all
I am using RS 2005
I have a report with chart
parameters = value1, value2, value3, all
How can I make the chart only show when all is selected?
cheers
jewel
View 5 Replies
View Related
May 21, 2007
Hi all,
Hopefully someone can clarify for me. I'd like to use custom colors for a chart that I have created. I've seen some code examples but I'm not really sure what to do with them. I've been using reporting services for like 2 days and I don't know xml or vb script, so I apologize for the probably stupid question. Thank you in advance.
-Keith
View 3 Replies
View Related
Mar 10, 2008
I am trying to display a chart from a data source that runs a stored procedure. The data dislays fine in the dataset tab, however, when I try to preview the report I get the following message:
'An error occurred during local report processing. The definition of the report 'reportname' is invalid. An internal error occured on the report server. See the error log for more details'.
I have looked at the error logs, but they do not help. I am thinking that my stored procedure is pushing a limit of the chart report. If I display the same data in a table, it displays fine, it is only in a chart. As I stated, the data is displaying in the dataset grid.
Can anyone give me an idea as to what my problem might be? I have other charts that run fine, but not using a stored procedure like the one below where I am performing multiple selects.
Below is the stored procedure:
set ANSI_NULLS ON
set QUOTED_IDENTIFIER ON
GO
-- =============================================
-- Author: Tim Olig
-- Create date: 09/20/07
-- Description: Returns Total Stored Procedure
-- =============================================
ALTER PROCEDURE [dbo].[sp_db_ReturnsSummary]
@Date smalldatetime
AS
BEGIN
SET NOCOUNT ON;
Select rtsum.FiscalYear,rtsum.Period,
rtsum.RMAComplete_ALL,
rtsum.RMAComplete_ANO,
rtsum.RMAComplete_EXT,
rtsum.RMAComplete_FAB,
rtsum.RMAComplete_SUN,
rtsum.RMAComplete_SUP,
salessum.ShipRev
from
(SELECT
CASE WHEN datepart(YY,returns.invdate) = 1900 then 2008 else datepart(YY,Returns.Invdate) end as FiscalYear,
CASE WHEN datepart(YY,returns.invdate) = 1900 then 'PENDING'
WHEN len(datepart(mm, returns.invdate)) = 1 THEN 'P0' + ltrim(str(datepart(mm, returns.invdate)))
WHEN len(datepart(mm, returns.invdate)) = 2 THEN 'P' + ltrim(str(datepart(mm, returns.invdate))) END AS Period,
"RMAComplete_ALL" = sum(returns.TotalCredit),
"RMAComplete_ANO" = sum(case when returns.respdept = 'ANODIZING DEPT' then (returns.TotalCredit) else 0 end),
"RMAComplete_EXT" = sum(case when returns.respdept = 'EXTRUSION DEPT' then (returns.TotalCredit)else 0 end),
"RMAComplete_FAB" = sum(case when returns.respdept = 'FAB' then (returns.TotalCredit) else 0 end),
"RMAComplete_SUN" = sum(case when returns.respdept = 'SUNROOF' then (returns.TotalCredit) else 0 end),
"RMAComplete_SUP" = sum(case when returns.respdept = 'SUPPLIER' then (returns.TotalCredit) else 0 end)
FROM [returns]
WHERE invfiscalyear = 1990 or returns.invdate >= @Date
group by datepart(YY,Returns.Invdate), CASE WHEN datepart(YY,returns.invdate) = 1900 then 'PENDING' WHEN len(datepart(mm, Returns.invdate)) = 1 THEN 'P0' + ltrim(str(datepart(mm, Returns.invdate))) WHEN len(datepart(mm, Returns.invdate)) = 2 THEN 'P' + ltrim(str(datepart(mm, Returns.invdate))) END)
as rtsum
left outer join
(select
datepart(YY,transdate) as FiscalYear,
CASE WHEN len(datepart(mm,transdate)) = 1 THEN 'P0' + ltrim(str(datepart(mm,transdate)))
WHEN len(datepart(mm,transdate)) = 2 THEN 'P' + ltrim(str(datepart(mm,transdate))) END AS Period,
"ShipRev" = sum(case when (OrderType = 'Invoiced' or OrderType = 'ToBeInvoiced') and SalesAcctDesc = 'Sales' then Revenue else 0 end)
FROM sforep where transdate >= @Date
group by datepart(YY,transdate), CASE WHEN len(datepart(mm,transdate)) = 1 THEN 'P0' + ltrim(str(datepart(mm, transdate))) WHEN len(datepart(mm, transdate)) = 2 THEN 'P' + ltrim(str(datepart(mm, transdate))) END)
as salessum
on rtsum.fiscalyear = salessum.fiscalyear and rtsum.period = salessum.period
END
Thanks,
Tim Olig
View 2 Replies
View Related
Jun 1, 2007
We are working with scatter chart in reporting services.we need to divide the chart into quadrants.We can use VB code in reporting services.Can anyone let me know the VB code to divide that into quadrants and coloring the quadrants
Thanks in advance
Subha
View 3 Replies
View Related
Jun 14, 2006
Hi all--I'm looking at SQL Server 2005 Reporting Services as a possible reporting solution for our data warehouse. One of our reporting requirements is the ability to do Gantt charts--has anyone out there had any experiences with creating one with Visual Studio 2005?
Thanks in advance!
View 4 Replies
View Related
May 3, 2007
Hi,
I have a report based on a line chart.
The values on X-axis are scaled from -100 to +100. I want to colour the band from -100 to 0 with red colour and that from 0 to +100 in green colour, and i want to provide legend for these bands/sections. How can i do this?
A prompt response would be really appreciated
Thanks a lot!!
Simranjeev
View 1 Replies
View Related
Jul 3, 2015
Is it possible to have the value labels always on top of the bars of a bar chart?
On the Chart Series Labels properties under Appearance, I used Top for Position, but if the bar reaches the top of the chart area (and that is determined automaticaly by the Y Axis that and can't be a fixed value).
View 5 Replies
View Related
Sep 1, 2009
We are having trouble finding a lot of documentation around configuring the Funnel chart. Specifcally, we would like to know if there's an option to be able to place the lengend title on the actual Funnel layer. Also, we would like to be able to control the order of the funnel layers to match a business process order from top to bottom. It would appear that the Funnel defaults to aphabetical ordering of the layers. Any good reference for the options available?
View 4 Replies
View Related
Sep 1, 2015
I have a Pie Chart report that works well until Users discovered that when values are 0% or less across the chart, the Legend returns NaN. How do I format the Legend to return 0% instead of the NaN that Users do not want to see. Below is my express for the Legend Property="#AXISLABEL" & " - " & "#PERCENT{P0}".
View 5 Replies
View Related
Jun 10, 2015
Parent Name ID Soft Hard Primary VTM
XYZ 2 50 10 40 100
rtm 3 20 20 60 500
RMM 4 40 20 40 300
I have the above output. When I try to input this as a dataset to a pie chart I don't get the data lables for two slices of the pie chart. Only one slice will show the values when showing data label option is enabled.
For the Pie chart, I have added Soft, Hard and Primary as Values. I haven't added a Category group or a Series group. Why isn't this showing the data labels for the other slices?
Do I need to transform the dataset so that it has a category and the value like below?
XYZ, 2, Soft 50
XYZ , 2, Hard, 10
XYZ, 2, Primary, 40
Will this work since it has a define category that I could insert for the chart.
View 7 Replies
View Related
Feb 15, 2008
I have a line chart which works great except when the x axis displays duplicate months. I have tried format codes of MM-YYYY and MMM and have the "numeric or time-scale values" checkbox checked. The data displays fine but the X axis in the case of the MMM format code displays as:
Sep Oct Oct Nov Nov
leaving the user to wonder where exactly does October and November start...
I've googled around but don't see off-hand what I am doing wrong. I am display 3 simultaneous lines if that matters...
Thanks!
Craig
View 4 Replies
View Related
