Reporting Services :: Make Bar Chart Color Red If Number Is Negative And Green If It Is Positive?
May 27, 2015
I have a 2012 report builder chart that has two series (one area chart and one bar chart) combined into one chart. The problem I'm having is the bar chart has much smaller numbers than the area chart and the scaling is messed up.
Is there any way to put the bar chart on the right axis and keep the area chart on the left axis? My goal is to increase the size of the bar chart in relation to the area chart.
Also, is there any way to make the bar chart color red if the number is negative and green if it is positive?
I have both positive and negative values in a single column, where I want sum total of positive values & negative values. Is there any Expression for this to sort out.
I was just wondering if there is a way of converting a number from negative to positive within Reporting Services, ie remove the "-" sign from the front of the number? One of the columns within my report contains a calculation which results in an integer, but it is always a negative number, even though it should really be positive (it would take too long to describe the exact reason for this, but it's to do with the underlying database, which I don't have access to anyway). When I right-click on the relevant cell within the table in Layout view in the Report Designer and go to Expression, there is a list of Conversion functions under the "Common Functions" heading but I can't find anything there which would convert a number from negative to positive. Does anyone know how this can be achieved?
Sorry if this question has been answered before--i tried a search but nothing came close to what i needed.
I have a report I am creating where I need to group on whether a number is positive or negative. The number will never be zero. This number is a decimal (currency), if that makes a difference.
I have tried creating a formula field with the following expression:
Code Snippet
IIf(Fields!Num.Value > 0, 1, 0)
I tried creating a group using this field (essentially, positive = 1 and negative = 0), but it gave me no results at all.
If you need any more information, please let me know and I will provide what I can. Thanks for your answers!
I have a column bar chart which displays values for each month. As per the requirement, January column must be blue, February must be orange, March must be green, April must be pink. These 4 colors would repeat for the remaining months.
I have to color format the bars in set of 4 colors. I have used SWITCH statements for other charts and it worked. But here in this case since it is a date field, I am getting error.
I have a chart with series that needs conditional colour for three conditions. One condition must be transparent. I have tried the various IFF or SWITCH expressions below and some work fine in SSDT but when I deploy them to the browser the formatting is lost. This simple IFF expression works. The series is transparent as required both in SSDT (Visual Studio BIDS) and IE11 and Firefox browsers but I need two other conditions.
Both of the expressions below work in SSDT (Visual Studio BIDS) as expected but when deployed to the browser none of this formatting is rendered and all series are in blues even the ‘transparent’ series. No red at all.
I have tried deleting various files RDL and DATA. I have tried uploading the file from report manager in IE and I have tried editing the file in report manager.
Getting old favourite message 'Out of Memory' when running a horizontal clustered chart with Category: 200 items Series: 200 items per Category.URL... 'By default, the report server sets WorkingSetMaximum to the amount of available memory on the computer. This value is detected when the service starts.'
The report has been tried on 3 large servers with 30GB & 60GB memory. The report runs on a 2008 install but not a 2008R2 install. We've created a test report that simply generates a series of data 1-n for Category and 1-n for Series where n can be set by parameter - so the issue is not to do with the volume of data or the processing required by SSMS. The report runs if the data is output to a table rather than a chart - so the issue appears to be with rendering the chart.
The chart is rendered when the Category has 200 items with a Series of 150 per Category. The report fails with Category 200 items and Series 200 per Category.
I have a very peculiar issue going on. I have a table that contains a decimal(18,2) column called "Amount". Looking at this table through Enterprise Mgr, I can see that there are values in there that are negative. However, when I run a query in Query Analyzer, it displays all the negative values as positives.
The only workaround I've found right now is to change the column type to "real" and then change it back to decimal(18,2), and it starts showing the negatives as negative. However, without performing this absurd workaround, it doesn't work.
Is there a known bug in QA that would manifest itself as this? What is the cause for this?
I followed the instructions and the textbox named Color did indeed display alternate colors on the odd rows. However, when I tried to propogate the color to the whole row using the expression =ReportItems!color.Value for the value of the backgroundcolor property, it was ignored.
So I tried some custom code: Public Function GetColor() Dim retValue as String retValue = Me.ReportItems!Color.Value return retValue End Function
The syntax parser didn't like ReportItems either. I first tried it without the Me object and I got a message about requiring an object so I tried Me.
Ok, I have a table with IP addresses stored in decimal format using both positive and negative numbers. The way that they are stored is: Positve 1 thru 2147483647 = 0.0.0.1 - 127.255.255.255 Negative -2147483648 thru -1 = 128.0.0.0 - 255.255.255.255 Conversion positive x/2^24 . (x/2^24)/2^16 . etc . etc negative (x+2^32)/2^24 . ((x+2^32)/2^24)/2^16 . etc . etc
I have a script which works by using UNION and the WHERE statements are x>0 x<0
My problem is I need to use a 3rd party app to run the script (McAfee ePO). McAfee does not recognize the UNION. My question is, can I acheive the same results as the script below, without using UNION.
SELECT ReportFullPathNode.FullPathName, cast(cast(IPSubnetMask.IP_Start as bigint)/16777216 as varchar) + '.' + cast(cast(IPSubnetMask.IP_Start as bigint)%16777216/65536 as varchar) + '.' + cast(cast(IPSubnetMask.IP_Start as bigint)%16777216%65536/256 as varchar) + '.' + cast(cast(IPSubnetMask.IP_Start as bigint)%16777216%65536%256 as varchar), cast(cast(IPSubnetMask.IP_End as bigint)/16777216 as varchar) + '.' + cast(cast(IPSubnetMask.IP_End as bigint)%16777216/65536 as varchar) + '.' + cast(cast(IPSubnetMask.IP_End as bigint)%16777216%65536/256 as varchar) + '.' + cast(cast(IPSubnetMask.IP_End as bigint)%16777216%65536%256 as varchar), cast(IPSubnetMask.LeftMostBits as varchar), IPSubnetMask.IP_Start FROM IPSubnetMask, ReportFullPathNode ReportFullPathNode WHERE IPSubnetMask.IP_Start>0 and IPSubnetMask.ParentID = ReportFullPathNode.LowestNodeID UNION ALL SELECT ReportFullPathNode.FullPathName, cast(cast(4294967296+IPSubnetMask.IP_Start as bigint)/16777216 as varchar) + '.' + cast(cast(4294967296+IPSubnetMask.IP_Start as bigint)%16777216/65536 as varchar) + '.' + cast(cast(4294967296+IPSubnetMask.IP_Start as bigint)%16777216%65536/256 as varchar) + '.' + cast(cast(4294967296+IPSubnetMask.IP_Start as bigint)%16777216%65536%256 as varchar), cast(cast(4294967296+IPSubnetMask.IP_End as bigint)/16777216 as varchar) + '.' + cast(cast(4294967296+IPSubnetMask.IP_End as bigint)%16777216/65536 as varchar) + '.' + cast(cast(4294967296+IPSubnetMask.IP_End as bigint)%16777216%65536/256 as varchar) + '.' + cast(cast(4294967296+IPSubnetMask.IP_End as bigint)%16777216%65536%256 as varchar), cast(IPSubnetMask.LeftMostBits as varchar), IPSubnetMask.IP_Start+4294967296 FROM IPSubnetMask, ReportFullPathNode ReportFullPathNode WHERE IPSubnetMask.IP_Start<0 and IPSubnetMask.ParentID = ReportFullPathNode.LowestNodeID
I have a table that displays a bunch of data based on their percentage changes.
There is a parameter (let's say 5%) that the user can set to display only the data which either increased more than 5% or decreased more than 5%.
I want to have a space between the positive changes and the negative changes. ie, to create a blank row between the +'s and the -'s. Does anyone know of a way to do this?
I am doing some analysis on our customer base and their payment profiles. I have generated two profile strings, one for whether the balance of an account has gone up or down and one for the size of the balance in relation to the normal invoice amount for the customer. So (for example) the balance movement string will look like this:
UUUDUUUDUUUD-D00 Where U = Up, D = Down, - = no change and 0 = no change and no balance
I want to analyse these strings in two ways. The first is that I want to find customers with a similar pattern: in the example below the first and last patterns are the same, just one out of sync but should be considered the same
Movement Multiple CountRecords UUUDUUUDUUUD1230123012301175 ------------0000000000001163 UDUUUDUUUDUU3012301230121082
The second type of analysis is to find customers whose pattern has changed: in the examples above the patterns are repeated and therefore 'normal' in the records below the patterns have changed in that the first part does not match the second part.
Movement Multiple CountRecords UUDUUUDUUUUU-----------07 UDUUUDUUUUUU------------7
good way to approach this without either a cursor or a hidden REBAR. The challenge as I see it is that I have to interrogate every string to find out if there is a repeating pattern and if so where it starts and how long it is (heuristic because some strings will start with a repeating pattern and then the pattern may change or deteriorate) and then compare the string for N groups of repeating characters to see if and when it changes and I can't think of an efficient method to do this in SQL because it is not a set based operation.
When I export the report in excel format the chart is displayed as picture. I want it to be displayed as editable chart.Does Office Writer work in this situation and did anyone use Office Writer to accomplish same type of problem.Is there any other method or product we can use instead of the office writer.
I need to create a chart with the following features
1) Bar chart that has data for 3 years (3 series) 2) Line chart that has the same data as per the above points on the bar chart but this is a running total. (3 series) 3) These data points are for the 12 months 4) there should be a secondary axis for the cumulative one
When using the back color property for SSAS 2008 R2, is there a good way to match the number to the desired color? I found some color pickers online, but the numbers don't match the same colors in SSAS. How can I best determine the number needed for the color I want?
Why does M$ Query Analyzer display all numbers as positive, no matterwhether they are truly positive or negative ?I am having to cast each column to varchar to find out if there areany negative numbers being hidden from me :(I tried checking Tools/Options/Connections/Use Regional Settings bothon and off, stopping and restarting M$ Query Analyer in betwixt, butno improvement.Am I missing some other option somewhere ?
I found something related to row coloring at :: [URL] ....
I went through all the properties for column but cannot achieve my goal. SO in my case .. the no of rows are fixed .. but columns vary .. so i want the alternate columns to be of different color (say white and silver)
I have requirement, In my chart report target(Dased Lines) and Below average lines are there, I want to set below average line values background color Pink color like below diagram. How can we achive the below requirement in SSRS 2012.
Note: Pink Color of Below Average Value based on expression.
I am new to SSRS. I created a reporting services with 3 groups. I would like to know how to create different colors for each group so that all my values displayed by color group ?.
I have built an SSRS report and fetching my data from an ERP system, previously we have done the same way and the reports are working fine, but only one report which is also working fine but when the values displayed in Preview or Excel, we cannot see values in Excel, when we click on the cell we can see the values in formula bar, but not in the cell. When we select the cell and change the color it will then display the values. In this report many of the values are displayed correctly, but some are not displayed, so every time we need to change the color of entire report. This is causing issues to the end users.
I have a matrix report and as per the requirement, I must format the row colors. First row must be no color and second row must be light blue. This color formatting would repeat for remaining rows in the matrix. I tried to select the entire row in the matrix, selected "Background Color" option and in "Expression" window, I entered "=IIf(RowNumber(nothing) MOD 2, "White","LightBlue")".This resulted in the color formatting of columns in the matrix report.
